Used Mechanic Lathe for sale (10,841)

Condition: good (used), Year of construction: 1979, Center height: 120 mm Center width: 450 mm spindle opening/boring: 23 mm board width: 100 mm Speeds: (12) 180 - 2240 min-1 travel top slide: 140 mm tailstock mount: MK 2 quill stroke: 80 mm motor power: 2,5 kW connection: 400 V dimensions approx.: 1300 x 880 x 1250 mm Weight approx.: 600 kg Equipment: Itodoip Nczspfx Aaner Punching device quick change holder system Multifix, size Aa Machine light Coolant device

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 172459, center width: 1,500 mm, spindle bore: 105 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over bed slide: 660 mm, turning diameter over cross slide: 900 mm, overall weight: 2,800 kg, total height: 1,600 mm, total length: 3,210 mm, total width: 1,230 mm, feed length X-axis: 368 mm, We purchased the lathe at the end of January 2024, but due to the current order situation, it has not been put into operation. We are now looking to sell it as part of our business closure. The machine’s accessories can be seen below. Working Area Workpiece length: 1,500 mm Swing diameter over bed: 660 mm Swing diameter over cross slide: 440 mm Swing diameter without gap bridge: 900 mm Gap bridge length: 320 mm Bed width: 400 mm Main Spindle Spindle speed: 25 rpm – 1,600 rpm Spindle bore: 105 mm Spindle mount: D1-8 Spindle taper: Ø 113 mm / 1:20 Rapid Traverse Rapid traverse X-axis: 2,000 mm/min Rapid traverse Z-axis: 4,000 mm/min Iedpfx Aex Dy T Ajanjtr Feed Feed rate X-axis: 0.022 mm/rev – 0.74 mm/rev Feed rate Z-axis: 0.044 mm/rev – 1.48 mm/rev Thread Cutting Metric threads: 0.45 mm – 120 mm Diametral pitch: 0.88 DP – 160 DP Module threads: 0.25 mm – 60 mm Whitworth threads: (54) 7/16 – 80 TPI Tailstock Quill diameter: 90 mm Tailstock taper: MT 5 Quill stroke: 235 mm Tailstock offset: ±12.5 mm Drive Main drive motor power: 7.5 kW Dimensions and Weight Dimensions (L x W x H): 3.21 m x 1.23 m x 1.6 m Weight: 2,800 kg

Condition: reconditioned (used), Year of construction: 1977, Engine Lathe Brand: WEILER Model: MDU 260 Year of manufacture: 1977 – workshop tested Machine no.: 14942 Centre height: 125 mm Spindle bore: 28 mm Accessories: - Electrically operated chuck guard - 3-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - 4-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - Safety chuck key Iodpfx Aexv A I Toanotr - Manual clamping device - Collet set W28 (366E) - Set (25 pcs.) collets W28 (366E) from 1.0-25.0 mm in 1.0 mm steps - Fixed centre for headstock W28 (366E) - Quick-change toolholder Body size A - Operating manual Used as seen, without warranty The machine is technically in accordance with the state of the art of its year of manufacture.

Condition: good (used), 1 x mechanic's lathe Habegger Neteor JH 102 Technical data: Center width 500 mm Tip height 105 mm Itodpfx Asq Dqh Ajanor Accessories: 1 x crank cross support 1 x Multifix quick-change system with 3 cassettes 1 x cranked tailstock (mounting: MK 1) 1 x fixed counter center in tailstock 1 x rotating counter center in tailstock 1 x drill chuck in tailstock 1 x 3-jaw chuck 110 mm 1 x drawtube in spindle Holder W 25 30 x collet chuck W 25/364 E Hand tool The machine can be inspected under power

Condition: used, Manual lever lathe SCHAUBLIN Type 102 Precision mechanic lathe Machine no. 208322 Year of manufacture: approx. 1970 Total bed length: 650 mm Center height over bed: 102 mm Center height over carriage: 53 mm Medium spindle speed: approx. 2,800 rpm (3 speed stages) Drive motor: 0.37 kW, 2800 rpm Power supply: 380 Volt, 50 Hz - Manual lever parting and grooving slide with precisely adjustable stops - Tool holder with precise height adjustment Iedpfx Aasw Iq Umonstr - Collet chuck device (only one collet included) - Speed change by shifting the drive belt Space requirement with stand: L x W x H 1150 x 600 x 1200 mm Weight with stand: 130 kg Good condition

Condition: used, Boley lathe Iodevzkp Hjpfx Aanjtr Various accessories

Condition: like new (used), Year of construction: 2023, GM – DC330MINI V4 Label Converter Year of Manufacture: 12/2022 _____ Machine Specifications and Equipment:  Max Webwidth: 330mm  Speed up to 65 m/min, semi rotary; 72 m/min full rotary  Unwinding max. 700 mm  Rewinding max. 450mm  Touch screen  Flexo Unit Corona  Webedge Control  Semi-rotary die cutting  Automatic register check  GEW – UV  Lamination  GM SmartCrush Ijdpsv Aa Twsfx Aanstr _____

Condition: used, Year of construction: 1995, functionality: fully functional, We offer this used KNUTH SH 150/610 SUPER engine lathe, year of manufacture 1995. Manufacturer: KNUTH Model: SH 150/610 SUPER Year of manufacture: 1995 Condition: used Category ID: 1136 Type ID: 1561 Machine type: engine lathe Ijdpfxsx Ivgcj Aanjtr If you have any questions or need more information, feel free to send us a message or call us.

Condition: used, turning diameter over bed 260 mm turning diameter over slide rest 140 mm turning length 500 mm centre height 125 mm bed width 160 mm spindle turning speed range 16: 110-3600 U/min spindle bore 28 mm face slide travel 120 mm upper slide-adjustment 120 mm Itjdpfxsvtthio Aanor tailstock quill taper MT 2 tailstock quill adjustment 80 mm drive motor 0,37 / 0,88 kW weight of the machine ca. 350 kg dimensions of the machine ca. 1,3 x 0,6 x 1,2 m Mechanic's lathe with manual feed and spindle support, drive via V-belt and stepped pulleys as well as 2-pole motor, hardened, finely ground work spindle, support adjustment over the entire bed length using eccentric clamping lever, three-jaw chuck, collet device with pliers, crank tailstock, cast base. Machine dealer with own stock of 1600 m².

Condition: used, Craven 2000mm x 8000mm Heavy Duty Lathe 2000mm swing over bed 1500mm swing over saddle 8,000mm between centres Main drive 60kW, 40 ton load capacity Ijdjx Hp Iwopfx Aanotr Spindle speeds 2 – 152 rpm Steadies 2000mm Bed extension

Condition: used, Precision Lathe BOLEY Type 4 LE Conventional High-Precision Universal Multi-Function Machine Tool Serial No. 42562 Centre Distance 500 mm Swing over bed 240 mm Centre height over bed 120 mm Swing over cross slide 140 mm Centre height over cross slide 70 mm Spindle bore 23 mm Chuck mounting M40 x 3.5 mm external thread Tailstock taper MK 2 Quill stroke / travel 80 mm Spindle speed 30 - 1300 rpm Drive power 1.1 kW Power supply 400 V, 50 Hz - 3-axis digital readout RSF ELECTRONIC, Type Z503ST-220 - Position display HEIDENHAIN, Type VRZ 136B for rotary encoder - LCD display unit for measuring equipment on accessories - Spindle speed adjustable via 2 V-belt stages, 2 gear stages, and infinitely variable via variator belt drive - Longitudinal feed via change gears + set of change gears - Several 3-jaw and 4-jaw chucks Ø 100, 125, and 140 mm with chuck jaws - MULTIFIX quick-change tool post size A with 8 exchangeable tool holders - Vertical slide with clamp - Several clamps and vices - Clamping plates + fixture tables - Indexing table as dividing attachment - Dividing head with collets and tailstock - Heavy dividing attachment with clamping plate and handwheel drive - WOHLHAUPTER spindle tools and milling cutters + collets - Rapid-traverse spindle with pneumatic drive - Milling slide with collet chuck - External cylindrical grinding attachment Iodpfjw Dvv Aex Aanotr - Live centre - Steady rest - VOGEL central oil lubrication - Built-in mini compressor (3.5 bar) in machine base - Compressed air maintenance unit for tooling - Operating manual - Machine mounted on steel plate (steel plate 1200 x 540 x 20 mm) Required space (L x W x H) 1650 x 950 x 1750 mm Weight lathe 660 kg (with steel plate) Weight of accessories 325 kg Very good condition

Condition: excellent (used), functionality: fully functional, GEMINIS GE1000 1000X4000 mm Itedewtniaspfx Aaner

Condition: used, turning diameter over bed 230 mm turning diameter over slide rest 100 mm Itedpfxjvkqcrs Aaner turning length 500 mm turning diameter in the gap mm turning speeds 160 - 5000 U/min centre height 115 mm spindle bore mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. 1,5 x 0,8 x 1,6 m Mechanic's lathe - Collet chuck - Multifix steel holder - Accessories see pictures

Condition: good (used), Used Pinacho L1-260 lathe Distance between points: 1625 mm Itjdpfx Aajudw Iijner Max. turning on bed: 520 mm Length of neckline: 350 mm Tilting on longitudinal carriage: 470 mm Turning on the transversal carriage: 320 mm Swing in dive: 770 mm Reed pitch: 68 mm Main engine power: 7.5 hp *It will be delivered with 3-jaw chuck. *Price can be requested with or without CE regulations.

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light Itodpsrtd Uwjfx Aanjr - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Isdpfou Axzksx Aanotr Good condition

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ Ijdex I A Hcepfx Aanstr • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.

Condition: excellent (used), Model: 4M/65E Condition: Very good Iodsxz Tfajpfx Aanjtr Dimensions: 80.00 (H) x 60.00 (W) x 120.00 (L) inches Additional Description: - Automatic copy lathe - To make spades, shovels, curling's, gun holders, axes, legs, cricket bats and so on. - Makes 4 pieces at the same time. - Router (no sanding attachment) - Speed regulation on slide. - Works great

Year of construction: 2008, condition: good (used), Transport trolleys, heavy-duty trolleys, electric heavy-duty rail trolleys, rail trolleys -Manufacturer: Mechanic Maschinenbau Hahn, electric heavy-duty rail car with lifting cylinder Itjdpfx Aajlbdlzsnjr -Type: Rail wagon MTA load capacity 20000 kg -Roll spacing: 2150 mm -Cylinder spacing: 2245 mm -Lifting height: 110 mm -Drive units: Demag -Individual components: see photos -Total dimensions: 2860/2440/H610 mm -Own weight: 2200 kg

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. Itedpfx Asxdmgvoanor The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM Ijdexpqm Rspfx Aanetr 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Itedpfx Aswhylveanjr Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: used, 630x4000 Under power. Itodpfxocncgho Aanor

Condition: like new (used), Year of construction: 2007, functionality: fully functional, TAKISAWA EX-122 CNC LATHE Category: CNC Turning Centers Reference No.: 311121 Capacity: Ø610 X 1524 MM Year of Construction: 2007 Technical Specification: CNC Control : Fanuc 21iT WORKING CAPACITY Max Turning Diameter : 610 mm Ijdpfxox Ehhdo Aanstr Max Turning Length : 1524 mm Swing : 910 mm Guideways : LM TURRET Turret : 10 Stations TAILSTOCK Tailstock : MT5 SPINDLE Max Rotation Speed : 1200 RPM Spindle Nose : A2-15 Spindle Bore : 200 mm Spindle Type : Gear Driven

Condition: used, Max. turning diameter: 650 mm Iodpfxevk T S Aj Aanjtr Min. turning diameter: 200 mm Max. turning length: 4000 mm Max. workpiece weight: 10 tons Center height: 400 mm Faceplate diameter: 650 mm Speed: 1 - 58.4 rpm Drive power: 45 HP Tailstock