Used Profile Roller for sale (13,803)

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 150 h, excellent condition BIRLIK PBM 35 profile bending machine, pipe bending machine for sale manufacturer BIRLIK Makina type: PBM 35 year of manufacture: 2007 Shaft diameters: 50mm Gkedpfjxc N Rhox Aatjb Roll diameters: 155mm Upper roller diameter: 148mm Working speed: 4.5m/min Motor power: 1.5kw Voltage: 3phase 380v 50Hz 3.8A Machine width: 700mm Machine length: 900mm Machine height: 1400mm Machine weight: 375kg Bending capacity: I-steel - flat 120 x 15 (d 750) mm I-steel - on the edge 60 x 10 (d 800) mm Angle steel 50 x 5 (d 1200) mm Round material 35.0 (d 800) mm Max. pipe diameter 70 x 2 (d 1200) mm Square material 50 x 40 x 3 mm

Year of construction: 2008, operating hours: 24,663 h, condition: ready for operation (used), functionality: fully functional, working width: 2,200 mm, machine/vehicle number: 0-241-06-7504, TECHNICAL DETAILS Godpfx Aszxgf Ueatokb Saw blade overhang: 125 mm Main saw motor: 18 kW Feed rate: 1–150 m/min Max. clamping width: 2,200 mm FEEDING SYSTEM Lift table dimensions: approx. 4,300 × 2,200 mm Lift table load capacity: 7 t MACHINE DETAILS Operating hours: approx. 24,663 h (as of 05.10.2023) EQUIPMENT Automatic panel feeding system Lift table feeding system Longitudinal/cross-cutting unit Roller conveyor and transport system

Condition: excellent (used), Catalogue number 7641 TECHNICAL DATA - Max. planing width: 800 mm - Max. planing height: 200 mm - Upper section: - Pull-in feed roller, toothed - Pawls - Pressure unit - 2 feed rollers, toothed - Pressure unit - Planing shaft 800 mm, 4-knife, 7.5 kW - Pressure units - Profiling shaft 800 mm, 4-knife (fitted with 3 straight knives, 1 profiling knife) - Pressure unit - Outfeed roller, smooth - Lower section: - Guide rail - Infeed table - Feed roller, smooth - Planing shaft 800 mm, 4-knife, 7.5 kW - 2 feed rollers, smooth - Smooth, split running roller - Side pressure at outfeed - Rear section: - 2 side spindles + pressure units: 1) Right vertical 90 mm, 4 kW 2) Left vertical 90 mm, 4 kW - Spindle diameter: 35 mm - Spindles arranged alternately - Spindles adjustable up/down, right/left 3) Additional lower horizontal spindle, 350 mm, adjustable up/down + right/left, 5.5 kW - Spindle diameter: 40 mm - Outfeed: 4 upper metal sliding rollers, 2 lower feed rollers, rubber-coated Gjdpjzxhdxefx Aatekb - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 7/14/9/18/11.5/23 m/min - Feed motor: 2.2 kW - Extraction outlet diameters: 3×180, 130 mm - Dimensions (L×W×H): 3100×2000×1900 mm - Weight: approx. 3,500 kg ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing beams, flooring, etc. – 3 planing shafts + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer in very good condition Net price: 64,900 PLN Net price: 15,450 EUR (based on an exchange rate of 4.2 EUR) (Prices may change with significant currency fluctuations)

Condition: good (used), Year of construction: 2010, functionality: fully functional, cutting length (max.): 1,00,000 mm, feed length X-axis: 5,050 mm, saw blade diameter: 550 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, overall weight: 1,800 kg, The Twin Electra 550 is a double mitre saw with 3 axes and an automatically adjustable saw head on linear guides. Electronic control of all mitre angles via a brushless motor, from 45° (inward) to 22°30’ (outward), with a precision of 240 positions per degree. – Connection to window manufacturing software (orgadata / Unilink / Wictop... etc.) is possible. The machine features the following equipment: - Industrial PC with Windows - Additional clamping device on the roller conveyor - Automatic profile support - Shortcut function - Overlength cutting - Crosscut - Automatic cutting - Connection to external software is possible (Orgadata, Unilink, Wiktop... etc.) Godpfxjz Adxgj Aatjkb

Condition: used, functionality: fully functional, Year of construction: 1995, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Tauring, controller model: CNC3A, number of rollers: 8, pipe diameter (max.): 60 mm, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, Tube & profiles bending machine ,Tauring Slalom 60-3A Gksdszi Ew Repfx Aateb 8 rollers for left and right hand bending sense Operation in manual and automatic programmable axis with digital screen readout One-pass bending programmable in different planes manipulator programmable “tube turner” 12 mtrs length tube feeder Complete with several set of rolls for tube from 14 to 60 mm - 8 pcs each set = total 140 rolls. Power rotation 3 kw voltage Vac 400/50 power hydraulic bending 2,2 Kw

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: AR200 tube and profile roll, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Delsy, controller model: MG Touch Pro 15", pipe diameter (max.): 273 mm, tube wall thickness (max.): 20 mm, bending angle (max.): 200 °, number of axes: 9, working height: 2,200 mm, overall weight: 27,000 kg, total length: 2,850 mm, total width: 2,950 mm, total height: 2,930 mm, power: 29.42 kW (40.00 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 240 bar, number of digital displays: 6, Equipment: documentation/manual, emergency stop, Profile bending machine model AR200 brand MG srl year 2016 Capacity chart of the machine in enclosed. Model AR200 Pipe bending roll NR. 2 set of rollers for pipe bending SIZE 159MM - SIZE 139,7 MM Gsdpfx Aoyx A Uueatekb Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic with gear unit each shaft -side arms left/right side hydraulic move in 3 direction keeping aligned the profile being formed. -Control panel console NC programmable with automatic rolling, touch screen 15” , display the 9 axis of the machine with readout for manual use and fully programmable automatic forming -Electric power supply 3phase 400/50 Vac -40HP -Service manuals and operation books original. Additional set of rollers and tooling available for bending section HEB - IPE -UNP - ANGLE – T -SECTION- TUBULAR- IRON BAR ON EDGE - see capacity chart in enclosed ..

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, overall weight: 1,900 kg, Emmegi Twin Electra 500 double miter saw with 3 CNC-controlled axes Cutting length 5000mm - longer in automatic mode, with automatic repositioning of the saw up to 10000mm Overhauled/like-new double miter saw with saw blades D=500 mm The machine can be motor-driven to swivel from 135 to 22.5 degrees and has a cycle control system. Software options for short cuts, macros, overlength cuts, crosscuts and cycle cuts are also available for this machine. Data transfer is possible (Orgadate, Schücal, etc.) Gkjdpfxsz Adywj Aateb Accessories: Moving roller conveyor, tensioner on roller conveyor, automatically extendable profile support between the heads.

Condition: used, Year of construction: 1997, Profiling line, consisting of DEP Gabbiani + Weinig planing machine DEP Manufacturer: Gabbiani Type: T-Module 80/1600 Year of manufacture: 1997 Planing machine Manufacturer: Weinig Type: 22 BL Year of manufacture: 1995 Technical data of the DEP - 6 machining motors per side - 2 fixed scoring units, 3.2 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 slotting units: 12.5 HP / 3000 + 4500 RPM - 2 free spaces - 1 feed motor: 4 HP / 1400 RPM Angle transfer between DEP and planing machine - Length: 290 - 1600 mm (1800 mm) - Width: 18 - 150 mm - Thickness: 5.5 - 50 mm - Density: 600 kg/m³ - Output max.: 150 workpieces/min - Belt conveyor after the double-end profiler - Toothed belt conveyor with brush attachment as counter holder - Cam conveyor for singulation - Toothed belt conveyor as buffer section Gjdpfx Aezuzfbjatjkb - Longitudinal discharge - Roller conveyor before the planing machine - Control: Vipa, compatible with Siemens S7 300 - Safety technology Protective door switches: 3 Safety light barriers: 1 Technical data of the planing machine Working width and working height - Working width: 20 - 230 mm (with tool diameter 125 mm) - Working height: 9 - 140 mm (with tool diameter 125 mm) Infeed table - Length: 2000 mm - Adjustment range of the jointer table: 10 mm - Adjustment range of the fence: 10 mm Surfacing table - Length: 1200 mm - Adjustment range of the table: 10 mm - Adjustment range of the fence: 10 mm Jointer spindle - Motor power: 5.5 - 15 kW Thicknessing spindle - Motor power: 5.5 - 11 kW Left spindle - Motor power: 5.5 - 11 kW 2. Right spindle - Motor power: 5.5 - 11 kW Top spindle - Motor power: 5.5 - 22 kW Bottom spindle - Motor power: 5.5 - 22 kW Universal spindle - Motor power: 5.5 - 11 kW Feed - Cardan feed, continuously adjustable: approx. 6-36 m/min - Motor power: 4 - 8.6 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Double mitre saw with 5 NC axes suitable for aluminium and light metal alloys, featuring automatic movable head adjustment and electronic control of all angles from 22°30' (internal) to 45° (external), with a fine-resolution of 280 positions per degree. The 600 mm saw blades offer two different feed modes. The standard feed optimises the cutting chart vertically for profiles taller than 450 mm. The radial mode utilises an extended stroke beyond the vertical reference plate, producing a large cutting chart horizontally for profiles up to 240 mm wide. Gsdpfx Aasz Ady Djtokb Accessories: - Pro software package: Overlength / Shortcut / Cross-cut / Wedge cut - Pneumatic profile supports - Data import from external software (LogiKal / Schücal / MAP / TXT / Excel, etc.) - Additional clamps - Additional material support - Short part clamp for automatic and semi-automatic cutting - Additional clamp on roller conveyor - Motorised feed - Safety hood with adjustable opening width for improved noise and dust protection The saw has extremely low operating hours and cutting cycles! It is in excellent condition. Only 13,000 cuts and 900 operating hours! Twin-head cutting-off machine with 5 NC axes for aluminium and lightweight alloys, with automatic mobile head movement and electronic management of all angles from 22°30’ (internal) to 45° (external) with a resolution of 280 positions per degree. The 600 mm saw blades have two distinct feed modes. Standard feed optimises the cutting chart in the vertical direction for cutting profiles over 450 mm in height. The radial mode utilises a large stroke beyond the vertical reference plate, generating a large cutting diagram horizontally for profiles up to 240 mm wide.

Condition: used, functionality: unexamined, Year of construction: 1978, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, shaft diameter: 400 mm, roller diameter: 622 mm, rotational speed (min.): 2 rpm, rotational speed (max.): 4 rpm, rotational speed (distance/time): 4,900 mm/min, pipe diameter (max.): 254 mm, tube wall thickness (max.): 10 mm, overall weight: 22,000 kg, total length: 3,900 mm, total width: 2,600 mm, total height: 3,300 mm, Equipment: emergency stop, BOLDRINI BSA 40 – Heavy-duty profile bending machine / roll for profiles For sale: a heavy-duty industrial profile bending machine, model BOLDRINI BSA 40, manufactured by BOLDRINI S.p.A., Italy. The machine is designed for bending and rolling metal profiles, tubes, angle profiles, rails, flanges, T-profiles, double T-profiles, and other structural elements with a large radius. It is suitable for the production of metal structures, halls, shipbuilding, tubular structures, tanks, flanges, and heavy industrial fabrication. Key data: Gsdpfx Aaezilzvstjkb Manufacturer: BOLDRINI S.p.A. Model: BSA 40 Year of manufacture: 1978 Serial number: 5936 Machine type: profile bending machine / angle bending roll / section bending machine Working system: 3 rollers Control: manual / electromechanical Drive: electric Weight: approximately 22,000 kg Condition: used, stored outside of a production line Available tools: set of rollers, dies, segments, and additional attachments, as shown in the pictures Approximate capacity according to model BSA 40: Angle profile: up to approximately 203 x 203 x 25 mm Tubes: up to approximately Ø254 mm Suitable for: tubes, L-profiles, T-profiles, double T-profiles, rails, flanges, and profiles with a large radius Equipment and features: The machine has a robust, heavy-duty construction, large working rollers, and mechanical adjustment via screw spindles. Working rollers, profile dies, additional segments, and attachments for various types of profiles are available. The electrical panel is present and includes contactors, relays, fuses, a transformer, terminal blocks, and controls. The machine has not been tested under load at the moment. Visible surface corrosion is present on some of the rollers, tools, and housing due to outdoor storage. An on-site inspection and electrical/mechanical check are recommended before commissioning.

Condition: new, Circular saw automation system Profilma 502, representative of the diverse "Profilma" series ideal for window and facade construction, automotive industry, machine and plant engineering, photovoltaics/solar, etc. • for aluminum and plastic profiles • fully automatic operation • Siemens S7 control with touch display, including piece counter • Error diagnosis including IXON router for VPN connection • Batch multiplier for the use of material bundles • Cycle time indication in seconds • for use with Ø 550 mm saw blades • Drive 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm • motorized saw feed, sawing cut from below • Cutting splitter extension on both sides of the saw blade • Material feed unit with ball screw spindle and servomotor • Feed length: 3 - 800 mm • Feed slide with adjustable support roller • Reversing mechanism up to a section length of max. 4.0 m • Automatic shutdown via limit switches at the end of the material • Remnant piece from 75 mm (depending on the profile) The basic machine is also available as a sawing, drilling, and threading automation system or as a sawing and punching automation system. Gjdpfx Aaszlr Rcstskb They complete your orders quickly and efficiently with precision and high production volumes. Further circular saw automation systems are also available for larger profile dimensions or cost-intensive workpiece materials, and are part of the proven Pressta-Eisele standard range. Based on your processing requirements, we will be happy to advise you!

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-20-8714, functionality: fully functional, Equipment: CE marking, documentation/manual, KDF 860 Edition, serial no. 0-261-20-8714, year 2016 Feed speed 8–20 m/min, rounding 20 m/min, workpiece width 70 mm, (8–22), minimum workpiece length 140 mm, CONFIGURATION: - Pre-milling - Spray separator - EVA adhesive application with QUICKMELT top preheating, Second glue pot A12 EVA (white glue) - Infrared workpiece heating - Side pressure (4 rollers; The first pneumatical) - Trimming with SOFTTOUCH function (smooth unit start-up); straight/angle trimming, exact/with overlap - Multifunctional multi-profile milling unit (R1 + R2 + chamfer); servo-adjustment - 2-motor SERVOTRIM rounding unit—controlled by linear motors on both axes, feed rate up to 20 m/min, soft-touch function for gentle contact of the unit with the workpiece, 4x servo-adjustment - Profile scraper unit – 4x servo-adjustment, dual-profile (R1 + R2) profiling guides with 0.01 mm step - Flat scraper unit, Gsdszuxh Hepfx Aatjkb - Spray cleaner - Brushes, - Motorized beam lift, - Motorized infeed fence, - Full automation, - POWERTOUCH control system, - moveable workpiece support, - loading guide for narrow parts - upper belt pressure

Condition: good (used), functionality: fully functional, Year of construction: 1992, control type: manual, degree of automation: manual, actuation type: hydraulic, shaft diameter: 100 mm, roller diameter: 300 mm, bending radius (max.): 500 mm, bending radius (min.): 500 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 5 rpm, pipe diameter (max.): 115 mm, tube wall thickness (max.): 3 mm, overall weight: 2,700 kg, total length: 150 mm, total width: 150 mm, total height: 150 mm, power: 7.35 kW (9.99 HP), input voltage: 380 V, operating pressure: 200 bar, year of last overhaul: 2026, Equipment: documentation/manual, emergency stop, hardened rollers, Profile bending machine model PP100 Output shafts 100 mm fully hydraulic operated lower shafts motion independent pyramid pinch -all the 3 shafts driven with gear unit and hydraulic motor Gsdpfx Ajywhamoatskb -lateral correctors left/right for guiding and align the profile, -Set of rollers complete with extra rollers to seat and bend the various shape of profiles. -7 set of rollers for pipe bending from 1,5” to 4,5” inch ( see photo in enclosed ) -Centralized control panel electric with digital position readout -Safety & emergency installation -voltage 3ph 380/50 -10 Hp -capacity chart in enclosed

Year of construction: 1976, condition: defective spare-parts repository (used), manufacturer: Ahrens Year of manufacture: 1976 Model: 206 Z Technical data: sheet width: 1000mm sheet thickness: 0,7mm Profiling stations driven: 12 pieces shaft diameter: 55mm drive: 55kW Gksdpfx Aaog Ul S Djteb infeed width: 1100mm distance between the stands: 650mm Dimensions of the individual components: roller table 1: 6.000 x 1.700 x 1.700 mm roller table 2: 6.000 x 1.700 x 1.700 mm Drive 1: 3,800 x 1,000 x 1,500 mm Drive 2: 6,300 x 1,000 x 1,500 mm reel: 3,000 x 1,300 x 1,600 mm shear: 1.700 x 650 x 1.000 mm Euro pallet: 1,200 x 800 x 1,200 mm For the whole machine 2 trucks are needed! Accessories/ special equipment: Decoiler Profile shear Remark: The switch cabinet is missing. The machine is therefore not ready for operation.The machine is used as basic setup for roof trapezoidal profiles with high beading.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 92805, Planer profiling milling machine WEINIG Profimat 26 Super Gkodpfx Ajynl N Sjatjb Working width 20 - 230 mm Working height 8 - 120 mm 5 working spindles Ø 40 mm Long infeed table (approx. 2000 mm) Bottom working spindle 5,5 kW / left + right 5.5 kW / top 5.5 kW / bottom finishing 5.5 kW Spindle speed 6000 rpm Pneumatic pressure of feed rollers Cardan feed infinitely variable 5 - 24 m/min lubricant pump mechanical digital displays Year of manufacture 2001 Dimensions 3400 x 1800 x 1900 mm (L x W x H), weight 2500 kg

Condition: used, Year of construction: 2008, Profiling machine Manufacturer: SCM Type: Superset NTE Year of construction: 2008 Technical data - Touchscreen control for the machine with 6 spindles + UNIWAVE - Spindle speed 8,300 rpm - Working width 240 mm, working height 125 mm, electronic - Touchscreen control MOBILE 10 - HSK 85S - SPINDLE QUICK-CHANGE SYSTEM T-SET - QUICK-CLAMPING DEVICE for tools - 7 shafts as a UNIWAVE, suitable for separating - 2 feed units after the upper spindles to reduce the center distance from 620 to 450 mm - Motor-driven feed roller in the working table, basic equipment for forced lubrication, electronic horizontal positioning, electronic adjustment of the tool diameter (setup) - Manual pump for lubricating the working table - WITH machining tool - Min. working width (finished size) mm 15 - Max. working width (finished size) mm 240 - Min. length of the individual workpiece mm 450 - Feed speed controlled via inverter 6 - 36 m/min, feed motor power kW 4 - Motor power surfacing spindle kW 7.5, quick-clamping device - Motor power vertical spindle right kW 7.5, Powerlock HSK 85 - Motor power vertical spindle left kW 7.5, Powerlock HSK 85 - Motor power upper horizontal spindle kW 7.5, quick-clamping device - Motor power 2nd upper horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power lower horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power universal spindle kW 7.5, quick-clamping device - Spindle speed rpm 6000/8300 - Spindle diameter mm 40 - Spindle receiving length vertical mm 220 - Spindle receiving length horizontal mm 250 - Axial adjustment range of the vertical spindles standard mm 75 - Axial adjustment range of the horizontal spindles standard mm 45 min. max. Gedpezuzfhsfx Aatokb - Sweeping circle diameter of the surfacing cutter mm 120/140 mm min. max. - Sweeping circle diameter of the profiling spindles mm 100/200 - Profiling depth of the 2nd lower shaft with a tool diameter of mm 200 mm 15 - Diameter of the spindle cylinders mm 120 - Diameter of the feed rollers mm 140 - Infeed table length mm 2500 - Adjustment range of the infeed table and infeed fence 10 mm - Motor-driven feed roller in the outfeed table - Manual central lubrication - On/off switch for the feed unit before the surfacing cutter - Horizontal pressure pads before the surfacing cutter with on/off switch - Pressure shoes at the front on the protective cover of the horizontal spindle(s), hardened insert in the working table in front of the surfacing cutter - Pneumatic pressure shoes in front of the upper horizontal spindles - Horizontal pressure device in front of the surfacing cutter, can be switched on from the control panel - 2 feed rollers 140 x 25 per feed shaft - Lighting inside the protective cover - Extraction capacity min. 10,443 m3/h - Including extraction hood! - Including Powerlock mounting bracket - All 240 mm heads, horizontally arranged, and fixed tools on HSK spindles are included. - Spare parts catalog: Complete, 8 PDF catalogs available Note: Not all tools shown are part of this offer. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, functionality: fully functional, On offer: FUTURA Krono 220 four-sided planer – 5 spindles, 220 mm The machine is used, has undergone technical inspection, is fully functional, and ready for operation. It can be started and thoroughly inspected at our company's premises before purchase. The machine's greatest advantage is its five-spindle configuration with a fifth rotating spindle that can rotate 360°, providing a wide range of possibilities for planing and profiling wooden components. Separate drive for each spindle, smooth feed speed adjustment, and pneumatic pressure on the rollers ensure stable and precise machining. Specifications: • Manufacturer: FUTURA • Model: Krono 220 • Maximum working width: 220 mm • Maximum working height: 130 mm • Number of spindles: 5 • Spindle arrangement: 4 fixed spindles and a fifth rotating spindle with a 360° range • Spindle diameter: 40 mm • Spindle motor power: 4 × 4.0 kW and 1 × 5.5 kW • Spindle drive: separate motor for each spindle • Feed motor power: 1.5 kW • Total power: 23.0 kW • Spindle motor brakes • Planing height adjustment: electric • Planing width adjustment: manual • Adjustment of the position of vertical spindles: up-down, similar to an inverted milling machine • Lower feed roller in the work table: 1 • Toothed feed roller before the first head • Pneumatic pressure on feed rollers • Feed speed adjustment: smooth, using a variator • Feed speed range: 6–28 m/min • Equipment: complete set of working heads and a cutterhead • Working heads: 3 spiral heads and 1 four-knife head Gkodpfx Ajzhpg Hsatjb • Infeed table: 2480 × 250 mm • Table lubrication pump • Soundproof cabin • Extraction ports: Ø140 mm • Year of manufacture: 1996 • Weight: approximately 1600 kg • Overall dimensions: 462 × 160 × 156 cm (L × W × H) • Original paint • Complete documentation in Italian • Head wrenches included • Complies with CE requirements Applications: • Four-sided planing of wooden components • Profiling of components using the fifth rotating spindle • Machining of components up to 220 mm wide • Machining of components up to 130 mm high Additional information: • The photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price stated in the auction applies to export sales/intra-community supply with a VAT rate of 0%; 23% VAT must be added for domestic sales Financing and transport: • We arrange transport using the MDD fleet or through external carriers • We assist in obtaining leasing or loan financing • Delivery costs depend on the destination and the method of transporting the machine

Condition: not inspected (used), Year of construction: 2022, load capacity: 2,000 kg, Mobile Portal Crane ABUS LPK IF INTERESTED, FURTHER IDENTICAL CRANES ARE AVAILABLE! Year of Manufacture: 2022 Machine Number: 153-002730 Condition: Uninspected Delivery Terms: Free loading onto truck Location: 21493 Elmenhorst-Lanken Availability: Immediately - by arrangement Payment Terms: Prepayment - by bank transfer Internal No.: 174-2 Technical Data: Crane bridge / crossbeam: approx. 3,280 mm Crane bridge profile height: approx. 240 mm Length of longitudinal beams: approx. 4,600 mm Length of running/foot beams: approx. 1,980 mm Height of running/foot beams incl. rollers: approx. 400 mm Lifting Gear: ABUS Electric Chain Hoist Type: GM 6 2000.3-2 Gkedpfszqfn Eex Aatsb Load capacity: 2,000 kg Lifting speed: 0.80 / 3.00 m/min Power supply: 400 V / 50 Hz Equipment: Electrically driven chain hoist / load hook (left/right) IF INTERESTED, FURTHER IDENTICAL CRANES ARE AVAILABLE! Scope of delivery: Existing documentation as shown in the images Dimensions & Weights: Installation dimensions L x W x H approx.: 3600 x 2000 x 5000 mm Transport dimensions L x W x H approx.: 4600 x 1500 x 1500 mm Weight approx.: 500 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional Notes: ►Upon request, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data subject to change without notice. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: good (used), You are bidding on: a branded device – a press brake, from a very good and well-known manufacturer – Schechtl. Features of the device: Press brake Schechtl MA 200 / 6 The bending beam bends cleanly – testing is possible. Angle adjustment for up to 6 bending steps (if only 2-3 or, for example, 4 are needed, simply set it to the desired number). Ideal for series bending. The machine was used by a carpenter. Bending length slightly over 2m. Sheet thickness: 2 mm iron – sheet – aluminum, zinc, etc., up to approx. 3 mm. Standard bending beam – radius for aluminum, zinc would also be available as an option, as would an extension and special bending beam! Foot pedal for operation. Optional depth stop. Sheet metal shear HT 200, or MT (see picture) – or sheet metal shear Schröder electric 2m – 2.5mm would be optional, but not included in the price – the offer can be adjusted. Gjdpfezzff Sex Aatjkb Important! You can optionally find and purchase many machines and machine accessories, such as various bending beams, depth stops – everything related to sheet metal and steel processing, such as press brakes, sheet metal shears, drilling machines, circular machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. I am always available to answer your questions. You will receive an invoice according to § 25 a UStG; the VAT is included in the invoice amount. Differential taxation. Free loading is possible – weight approx. 1700 kg. Inspection and testing are possible and desirable after arranging an appointment by telephone. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer himself (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Article number: Press brake MA 200 / 6

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Tauring, controller model: digital readout, number of rollers: 3, shaft diameter: 70 mm, roller diameter: 245 mm, pipe diameter (max.): 100 mm, tube wall thickness (max.): 6 mm, overall weight: 1,300 kg, total length: 1,640 mm, total width: 1,220 mm, total height: 1,580 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, Profile bending roll Tauring Alfa 70H2 year 2003 Gksdpoyx Dg Ssfx Aateb -Hydraulic section bending machine with digital readout -3 rolls powered driven - -dual pre-pinch pyramid roll configuration Shafts output 70 mm – Size of universal rollers 245 mm Lateral correctors left/right side hydraulic motorized operated Machine reversible can work with shafts vertical/horizontal Tooling: -Set of universal rolls and spacers Pipe bending rolls set for tube 22,5 – 61 – 76 - ( see photos of the rolls in enclosed ) Power total installed 5,5Kw Vac 380/50 Dimension 1640 x 1220 x H1580 mm Weight 1300 kgs -CAPACITY CHART IN ENCLOSED

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, total length: 4,200 mm, total width: 1,300 mm, total height: 2,200 mm, overall weight: 2,000 kg, input voltage: 380 V, grinding belt width: 80 mm, input frequency: 50 Hz, Direction of machining: from left to right. Two belt sanding units with a traversing sanding pad (option to use profiled pads). Sanding units mounted on a cross column, with adjustable height, left/right positioning, and angle adjustment. Electronic system for adjusting the advance and retraction of the sanding pad, synchronized with the feed rate (changing the feed rate automatically adjusts the advance/retraction times of the pads). Adjustment of the pad pressure. Adjustment of the sanding belt tension. Oscillation of the sanding belt. Two sanding belt speeds. Max. sanding belt width: 80 mm. Feed rate is continuously adjustable using a variator. Pressure bar with pressure rollers (new pressure rollers). Gedpfx Aozz Rh Sjatekb Additional lateral pressure.

Condition: used, Year of construction: 2003, Ami pallet transfer transfer roller conveyor chains 90° 1750-1397-1262-1100 RA2296 Gkedpfetug S Dsx Aatob Make: AMI Running direction: both directions Roller width (RB): 1080 mm / 1100 mm profile spacing Nominal/outer width (NB): 1262 mm Length: 1397 mm Diameter of rollers: 89 mm Frame height: 160 mm Roller spacing: 175 mm Chain transfer motor: SEW motor 300-500 V, 0.37 kW Lifter motor: SEW motor 300-500 V, 0.5 kW Roller conveyor motor: SEW motor 300-500 V, 0.37 kW Conveyor speed: 0.15 m/s Chain spacing: 450 mm total width: 950 mm Transfer length chained: 1750 mm Chain type: Double chain, mounted on plain bearings Scope of delivery: incl. supports, Height 500 mm (top edge of rollers) Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), BRANDT highflex 1220 edger Kdf220 Pre-milling cutters Replaceable trimming head Glue application with a roller Pneumatic pre-trimming guillotine Gkjdpfezy N Nrjx Aatsb Pressure rollers Finished-edge trimming blades Up-and-down milling unit R1-R2, pneumatically adjustable Corner rounding Profile trimming cycle Flat trimming cycle Max. part height 60mm Max. veneer thickness in roll 3mm Material width min. 70mm Feed rate 11m/min Machine length 455cm Connected power approx. 10KW Machine inspected, ready for operation.

Condition: new, Year of construction: 2026, BENDMASTER 70 Tube and Profile Bending Machine The BENDMASTER 70 tube and profile bending machine is an industrial, non-mandrel bending machine designed for precise bending of steel tubes, square profiles, and materials with larger cross-sections. Thanks to its robust construction, automated bending angle measurement system, and powerful drive unit, the machine provides repeatability, efficiency, and reliability – even during intensive production work. It is an ideal solution for heavy industry, construction, and industrial installation applications. Main advantages of the machine Non-mandrel bending system – enables tube bending without the need for a mandrel, simplifying operation and accelerating the production process. Maximum tube capacity of 70 × 5 mm – allows processing of thick-walled steel and structural tubes. 5 kW main drive motor – provides high torque and reliable bending performance even with demanding materials. Digital bending angle display – real-time monitoring of preset and actual values enables precise parameter adjustment. Two-speed operating system – 1.2 rpm during bending and 2.4 rpm during return movement increase overall cycle efficiency. Stable welded steel construction – ensures resistance to deformation and vibration, even under heavy loads. Dies for tube diameters 38.1 mm, 48.3 mm, and 70 mm – the machine includes tooling for the most commonly used industrial tube sizes. Design and technology The BENDMASTER 70 has been designed as a non-mandrel roller bending machine with an electro-hydraulic drive system, suitable for heavy-duty operation. The powerful 5 kW main motor enables stable and safe bending of large-diameter tubes. The digital bending angle measurement system integrated with the control panel allows precise programming and monitoring of operating parameters. The machine features a compact design and can be integrated into production lines. Precision and work efficiency The BENDMASTER 70 steel tube bending machine provides complete control over the bending process. The die rotation speed during bending (1.2 rpm) ensures accuracy and process safety, while the fast return speed (2.4 rpm) improves productivity. The ability to bend up to 180° allows the production of complete arcs and spiral shapes, including large-section structural tubes. The machine is designed for precise forming of components where dimensional accuracy is critical. Applications The BENDMASTER 70 bending machine is used in many industrial sectors, including: production of steel structures and load-bearing components, construction and installation industries, HVAC and heating system installations, production of railings, gates, and industrial fencing, prefabrication plants for piping systems. Standard equipment Digital bending angle measurement system Tube bending dies: Ø 38.1 mm Ø 48.3 mm Ø 70 mm Technical specifications Parameter Value Maximum tube bending capacity 70 × 5 mm Maximum square profile capacity 50 × 50 × 2 mm Maximum bending angle 180° Die rotation speed during bending 1.2 rpm Die rotation speed during return 2.4 rpm Main motor power 5 kW Overall dimensions 1300 × 700 × 900 mm Weight 680 kg Gjdpfx Aevugv Asatokb

Year of construction: 2016, condition: good (used), functionality: fully functional, The KS AluKap Duo is a machine designed for the production of aluminium profiles for roller shutters with interlocked curtain slats. It automatically cuts the profiles to the required length, assembles them into a curtain, and secures them. A key function of this machine is its capability to perform several operations simultaneously: cutting profiles to size, joining them to form the roller shutter curtain, and locking (interlocking) to prevent shifting after installation. Electrical connection: 3.5 kW, 400 V, 50 Hz. Shutter width: min. 500 mm – max. 3,500 mm. Label printing (optional): 36 x 89 mm. Machine transport is the buyer’s responsibility. We offer assistance with loading. Godpfxow Dm Hrj Aatokb