Used Profile Rolling Machine for sale (88,702)

Condition: new, The KPB 81, a robust Tube and Profile Rolling Machine, excels in high-performance bending, combining modern mechanical engineering with powerful hydraulics. This advanced machine allows you to bend medium and heavy steel profiles with remarkable precision, making it ideal for various applications in metal construction, locksmithing, and mechanical engineering. Equipped with three motor-driven rollers, hardened and ground shafts, and an overload slip-clutch, the KPB 81 ensures efficiency and safety. The modular roller system provides optimum adaptability for bending a wide range of profiles, while the hydraulically adjustable bending rollers enhance versatility, allowing for both horizontal and vertical machining. Standard equipment includes a digital display, control panel, and operator manual for intuitive operation. To experience the precision and performance of the KPB 81 in the Tube and Profile Rolling Machines category, you can request a quote today. Chjdpsn Upglefx Addof

Condition: excellent (used), Year of construction: 1990, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 229, total width: 500 mm, total length: 600 mm, total height: 1,200 mm, number of straightening rollers: 5, Profile rolling machine: Rolling - Bending - Straightening / Profile dimensions as per attachment (see photo) Codsxrflmspfx Addshf

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Codpfx Aoh A S Htjddohf Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, CNC Thread, Gear, and Profile Rolling Machine Model ROLLEX 1 Substructure: The substructure of the thread and profile rolling machine consists of welded steel profiles, partially covered with sheet metal. The space for the process lubricant reservoir is located in the front area of the substructure. Chodpsv Uxq Sofx Addsf Main drive: The main drive generates the rotary motion of the rolling tools required for gear rolling. The drive motor is flanged to the base plate of the rolling spindle bearing via the Cyclo Drive gearbox. The rotary motion is transmitted to the rolling spindle via the Schmidt coupling. The machine operates in a speed range of 0 to 30 rpm, with this range further subdivided into 0 to 20 rpm for continuous operation (S1) and 20 to 30 rpm for intermittent operation (S4). The speed is continuously adjustable using a frequency converter. Brand PROFIROLL Type ROLLEX 1 Year of manufacture 2003 Control, Brand, Type Siemens, Sinumerik, 840D Motor power (kW): 18 kW Electrical connection: 400 V Rolling range: Max. rollable workpiece diameter: 40 mm Rolling carriage stroke: 2 x 80 mm Min. / max. center distance of rolling spindles: 160 / 320 mm Rolling spindle height above the machine bed: 160 mm Max. tool diameter: 250 mm Rolling spindle mounting diameter: 120 mm Rolling spindle mounting length: 80 mm Power & Drive Max. rolling force: 100 kN Rolling spindle speed, continuously variable 0-30 rpm Motors Rolling spindle drive: 2 x 13 Nm Hydraulics 50 Hz: 5.5 kW Process lubrication 50 Hz: 0.1 kW Central lubrication 50 Hz: 0.06 kW Temperature range: +5–+40 °C Current type/frequency: 3 N/50 Hz Nominal voltage: 400 V Control voltage: 24 V Auxiliary voltage: 24 V/230 V Connected load: 18 kW Nominal current of the machine: 39 A

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Chsdpfx Aeuz If Njddof Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 12,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° Cedpfx Adjw A H T Aodjhf U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 4110BC19, control type: CNC control, MACHINE DETAILS Performance Data Connection: 380 V Frequency: 50 Hz Rated power: 35 kVA Fusing: 63 A Csdexxklxspfx Addehf EQUIPMENT CNC control

Condition: used, 2 Used Thread Rolling Machines WMW UPW25 ---Only 10.000,00 Euro--- Cedpox Dmnyofx Addehf

Year of construction: 2002, condition: used, 1 piece profile punching machine SCHÜCO, as per photos and inspection. Year of manufacture: 2002. Dimensions L/W/H: 45x45x110 cm. Condition: used. Payment method: advance payment by bank transfer. Storage location: production hall. Shipping: Collection only – shipping is not offered for this item! Chjdpox A Ayvjfx Addof

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, feed length X-axis: 200 mm, feed length Y-axis: 150 mm, spindle speed (max.): 12,000 rpm, spindle speed (min.): 2,000 rpm, Optical CNC Profile Grinding Machine WASINO GLS-5T Control: Fanuc 4-axis CNC controlled Comprehensive accessories Inspection under power possible Technical data – see attached images Cedjxzqb Eopfx Addjhf

Year of construction: 2000, condition: good (used), CNC surface and profile grinding machine Fabr.Ziersch & Baltrusch Type:PROFITLINE ZB 62 NC Year of manufacture.2000 grinding range : 600X270mm Electromagnet with continuous transverse pole pitch Cedefrbckopfx Addohf 600X200mm. P = 4 mm Wet grinding device, with automatic paper belt filter, machine trough. Complete machine documentation available.

Condition: good (used), functionality: fully functional, Year of construction: 1996, Used 3-roll plate bending machine by BIKO / FACCIN Model: 3HCD 2018 Capacity: 2050 x 8 mm Chsdpjx Dl Huefx Addsf Top roll: ø 180 mm Equipped with swing-out bearing

Condition: used, Year of construction: 2021, plate thickness 2.5 mm Cjdsx A H T Topfx Addshf throat 260 mm distance between roll centers 92.0 mm weight 295 kg range L-W-H 1200 x 700 x 1200 mm Equipment: - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Condition: excellent (used), Year of construction: 1992, Shaft diameter: 40 mm Bending capacity: Flat bar edgewise at 500 mm Ø: 60 x 10 mm Flat bar flatwise at 400 mm Ø: 100 x 15 mm Square bar at 500 mm Ø: 35 mm Angle iron, leg outwards at 450 mm Ø: 50 x 50 x 6 mm Angle iron, leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-section, T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm Electrical connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Cedpfx Adjx Anpvodjhf Weight: approx. 480 kg

Condition: used, Year of construction: 2007, pressure 20 - 300 kN adjustment of rolling slide 50 mm diameter of rolling spindle 120 mm roll spindle height over machine bed 200 mm Control SIN 840 D taper length of the roll spindle 200 mm rolling spindle turning speeds 0 - 50 1/min torque per rolling spindle 2700 Nm Chjdpfx Aew E Nmkoddof power capacity 2 x 8,4 kW distance between rolling spindles min. 271 / max. 368 mm rolling tool outer diameter max. 300 mm total power requirement 26 kW weight of the machine ca. 7,1 t dimensions of the machine ca. 9,70 x 4,50 x 3,80 m CNC machine for gear cold rolling / thread rolling Hydraulic rolling process Felsomat loader cell Complete housing

Condition: used, Year of construction: 2006, Technical data: Working ranges: X-axis: 1870 mm Y-axis: 400 mm Z-axis: 560 mm C-axis speed: 3000 rpm Max. grinding area: 1700 x 620 mm without table dresser: 1500 x 620 mm Table dressing device, diamond wheel: ø 110 mm Grinding wheel diameter: 400 mm Max. width: 100 mm Grinding wheel bore: 127 mm Distance table to spindle center: 800 mm Table height: 900 mm Chedpfxexzq I So Addof Max. table load: 2200 kg Weight, approx.: 12,000 kg Equipment: - Siemens SINUMERIK 840D control, OPO12 operator panel - Measuring system - Electro-magnetic clamping plate - Full enclosure - Central lubrication - Mist extraction - Clamping system for automatic wheel change - Coolant unit - Coolant recirculating chiller - Profiling device Water treatment system available at additional cost

Condition: excellent (used), Catalogue number 7781 TECHNICAL SPECIFICATIONS - Maximum milling height: 216mm - Maximum milling depth: 65mm - Maximum cutter diameter: 250mm - Spindle working length: 500mm - Spindle speed: 4600 rpm - Spindle diameter: 40mm - Max tool diameter: 250mm - Worktable dimensions (L/W): 890x400mm - Motor: 11kW - 2 pneumatic material clamps - Air requirement: 6-8 bar - Dust extraction port diameter: 160mm - Dimensions (L/W/H): 1330x1200x1470mm - Weight: 970kg ADVANTAGES Chjdpjxnymkefx Addef – Polish manufacture – Not repainted – Used milling machine, very good condition Net price: 38,900 PLN Net price: 9,260 EUR (calculated at 4.2 EUR exchange rate) (Prices may vary depending on significant fluctuations)

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 150 mm, side roll diameter: 130 mm, working width: 2,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by electric motor - Hydraulic up/down movement of rear and lower roll - Precision bending with main motor equipped with brake - Conical bending and pre-bending system - Upper and lower roll driven by planetary gearbox - Rear roll ball support system for easier plate handling - Compliance with EU safety directives - High-strength forged steel rolls made of SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 pcs) - Operating manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for support during large-diameter bending - Hydraulic side supports for large-diameter bending - Ground and polished rolls - Wire grooves on roll ends - NC control unit - Dual-speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Csdpfx Adsxw D Udjdohf Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Condition: excellent (used), Year of construction: 2004, Description to follow! Chedpfxsxy S D So Addsf

Condition: new, The KRM ST 20/6, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, including steel and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and an asymmetrical roll arrangement, the KRM ST 20/6 can handle even the heaviest plates with precision. The crowned and hardened rollers are suitable for processing stainless steel, while the machine boasts a motorized drive powered by a 4 kW electric motor. Control is simplified with a foot switch, and the emergency stop safety rope ensures safe operation. You can trust the central lubrication system for reliable maintenance and operation. For those looking for quality Plate Rolling Machines, the KRM ST 20/6 stands out as a solid investment. Request a quote today to enhance your sheet metal processing capabilities with this exceptional 3-Roll Motor Plate Roller. Codpsqagtiefx Addehf

Condition: used, Roller sets for section bending machine, 3-roll ring bending machine HERKULES WETZLAR The rollers fit a section bending machine HERKULES WETZLAR type BO 238 N Shaft diameter: 60 mm with 18 mm keyway 2 rollers set No. 1, roller diameter = 110 mm, roller width = 180 mm 2 rollers set No. 2, roller diameter = 160 mm, roller width = 40 mm 3 rollers set No. 3, roller diameter = 150 mm, for tube diameter Ø 33 mm, roller width 87 / 115 mm - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm without keyway The machine had 2 driven rollers Total weight of all rollers: 57 kg Codpfoglaq Ijx Addjhf Good condition

Condition: new, bending length: 1550sheet thickness: 1.2upper roll diameter: 70 Chjdsd Ab T Ispfx Addjf Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover EURO 362,-- - Hardened rolls EURO 550,-- - Variable Speed of Rotation  We have many references!

Condition: new, Year of construction: 2025, control type: NC control, degree of automation: automatic, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 180 mm, side roll diameter: 150 mm, working width: 2,550 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, warranty duration: 12 months, Equipment: documentation/manual, emergency stop, foot remote control, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up/down movement for rear and lower rolls Precision bending with braked main motor Cone bending and pre-bending system Lower and upper rolls driven by planetary gearbox Rear roll ball system for easy sheet movement Compliance with EU safety directives High-strength forged steel rolls made from SAE 1050 (CK45) certified steel Hardened shafts Digital indicators (2 units) User manual OPTIONAL EQUIPMENT Cjdpfxoxw D Tme Addohf Top crane (elevator) for support in large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves on journal ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll: 180 mm Side Roll: 150 mm Min. Bending Diameter: 270 / 900 mm Motor Power: 4 + 1.1 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4350 mm Width: 1100 mm Height: 1290 mm Weight: 3070 kg

Condition: new, The KRM ST 30/5, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, steel, and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and hardened rollers, it provides reliable and precise results. The asymmetrical roll arrangement accommodates heavy plates, and its conical bending capabilities are enhanced by an adjustable rear roller. Moreover, it includes a user-friendly separate control panel with a foot switch for easy operation. Maintenance is simplified through central lubrication, ensuring long-lasting functionality. You can take advantage of the KRM ST 30/5 for your plate rolling needs; request a quote now and enhance your sheet metal processing capabilities. Chsdpfx Adeihvtgsdof

Condition: new, bending length: 1050sheet thickness: 1upper roll diameter: 56 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover - Hardened rolls EURO 336,-- Cjdpfsd Ab Uxex Addjhf We have many references!