Used Profiling for sale (5,391)

Condition: excellent (used), max. width of grinding wheel 15 mm Nodpount Eajfx Adwekt max. dia. of grinding wheel 110 mm module 0,5 - 10 pressure angle 15 - 25 ° turning speeds 2800 U/min ratio total power requirement 0,4 kW weight of the machine ca. 20 kg dimensions of the machine ca. m for Reishauer RZ 400 and other models.

Condition: reconditioned (used), Year of construction: 1997, operating hours: 216 h, functionality: fully functional, Equipment: documentation/manual, A reconditioned and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx.30 rpm Screw torque: 10000 Nm Motor power: 3.8 - 23.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers PMA KS40 Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Total weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: recondition and checked for function Vacuum Calibration Unit Manufacturer: Blake Kunststoffproduktionsanlagen Type: 203-3-4,0 Year of manufacture: 1997 Serial number: 758 Total length: 5600 mm Vacuum pumps: 3 x 5.5 kW Longitudinal adjustment: electromotive Height/lateral adjustment: front and rear via threaded Nksdjx Rx D Ajpfx Adwjt spindle and handwheel V2A tub: interior/exterior width: 450/700mm, length: 4500 mm Connected load: approx. 20 kW Total weight: approx. 3.000 kg Condition: recondition and checked for function Caterpillar Haul-Off Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Pads width: 300 mm Passage width: max. 500 mm Passage hight: 100 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function Profile cross-section, max.: approx. 500 x 100 mm Note: The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately.

Condition: good (used), Folding machine, folding machine, form folding machine, profiling machine, profiling system, slat manufacturing, blind manufacturing Nedpopvqy Defx Adwokt -Profiling plant: Replacement stations for ID26309 -Profiling machine: heavy-duty design, used for manufacturing slats/blinds -bottom profiling stations: 5 pieces -Drive shaft: Ø 35mm -Dimensions: 4x 700/390/H400 mm 2x 300/200/H160 mm -Weight: 702 kg

Condition: good (used), Profile turning head, boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, universal drilling head, profile turning head Nkedpfxowylh Tj Adwot -Manufacturer: MFB Maschinen, ARMAG, profile turning machine -Recording: MK4 -Accessories: including extensive accessories see photos -Box dimensions: 450/350/H195 mm -Total weight: 5.4 kg

Condition: good (used), Year of construction: 1995, Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with copier -2x: milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x: grinding head -Power: 1.1 kW -Speed: 500-1500 rpm Nksdpfx Aocg Al Ssdwot -Milling and grinding heads in thickness: adjustable -Max. Workpiece thickness: 40 mm -Max. Corner radius: 40 mm -Dimensions: 1200/1600/H1520 mm -Weight: 782 kg

Condition: used, total length: 1,330 mm, total width: 1,040 mm, total height: 1,150 mm, Empty weight: 1.800 kg Price: On request Nsdpfx Ajxuf Sljdwekt - Documentation available: No - CE certificate present: No - Drive system: Conventional - Shaft diameter [mm]: 85 - Capacity diameter round [mm]: 60 - Transport dimensions: 1330mm x 1040mm x 1150mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 12200991016, rotational speed (min.): 24,000 rpm, overall weight: 1,635 kg, tool weight: 2,900 g, input voltage: 400 V, For economical and efficient machining of aluminium, plastic and thin-walled steel profiles All machining processes such as milling, drilling and thread cutting take place on a stationary profile, protecting the profile surface Improved work results thanks to the use of intelligent control technology Fast positioning of the machining unit at up to 60 m/min thanks to the use of dynamic servo drives Thread cutting without compensating chuck Automatic clamp recognition and positioning Automatic tool magazine with four tool shelves (without tools) Modern, 3-axis control Ergonomic work thanks to the use of a modern inclined bed No need for a reference movement of the axes thanks to the use of absolute encoder-based systems Collision avoidance thanks to automatic clamp recognition and positioning Power-Torque milling motor with closed speed control ensures short start-up and deceleration times spindle Certified, drive-integrated safety functions Low power consumption thanks to intelligent control technology Increased energy efficiency thanks to the connection of axis drives between circuits Uninterruptible power supply (UPS) Windows operating system 15.6" Panel PC, i3 processor, USB ports and network interface Easy and convenient program entry via eluCam on the operator panel, even during machining Remote online maintenance Machine equipment Air-cooled 8 kW milling spindle, S1 Cabin for operator protection Four horizontal pneumatic clamps for clamping the material Material stop, left side HSK-F63 tool holder Minimum quantity lubrication High-performance coolant Manual control panel Nodowgmyqopfx Adwskt Depth gauge Options Tools Tool holders Automatic tool magazine for up to four standard tools Automatic tool magazine for angle head Rotating head HSK-F63 angle for two tools Green-line cooling unit for control cabinet with reduced energy consumption Barcode scanner Protective cabin, optionally with all-round closure Four clamps as standard. Expandable to eight clamps Right reference material stop for placing workpieces with overlength processing Additional stop for overlength processing on the left Length measurement on both sides Double clamp and additional accessories upon request Panel PC 18.5", i5 processor Panel PC 21.6", i7 processor Note holder Sound-absorbing hood Chip disposal using chip trays

Year of construction: 2000, condition: good (used), CNC surface and profile grinding machine Fabr.Ziersch & Baltrusch Type:PROFITLINE ZB 62 NC Year of manufacture.2000 Nkedpfsfrbcksx Adwet grinding range : 600X270mm Electromagnet with continuous transverse pole pitch 600X200mm. P = 4 mm Wet grinding device, with automatic paper belt filter, machine trough. Complete machine documentation available.

Condition: new, shaft diameter: 30 mm, input voltage: 230 V, roll diameter: 30 mm, - Shaft diameter 30 mm - Rotates clockwise and counterclockwise - Emergency stop - With 1 set of standard castors - With 1 set of plastic rollers for pipe 16 and 50 mm - Documentation - 230V Nodpfx Aor Rug Hjdwskt

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 155 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 105 mm, input voltage: 110 V, type of input current: AC, table length: 405 mm, input current: 3 A, table width: 155 mm, Equipment: lighting, Mitutoyo PH-350H Profile Projector Part Number: 172-101-4 Serial Number: 70174 SPECIFICATIONS: Screen Size….35.5 cm Table Surface (3 T-Slots)15.5 cm x 40.5 cm X-Axis Travel…15.5 cm Y-Axis Travel…10.5 cm Z-Axis Travel…10.5 cm Njdpfx Aowr Uvqodwskt Table Rotation….+/- 10 degrees Projection Type….Horizontal Table Load Capacity – Maximum…40 kg Surface Illumination.150 W Halogen Lamp Electrical System…110 V/50 Hz/3 Amps Comparator Dimensions 76 cm L X 122 cm W X 117 cm H Cabinet Dimensions 51 cm L X 122 cm W X 45 cm H

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 252 mm, travel distance Y-axis: 152 mm, workpiece weight (max.): 40 kg, input voltage: 110 V, type of input current: AC, total height: 1,155 mm, total length: 1,137 mm, space requirement width: 467 mm, overall weight: 155 kg, table length: 450 mm, table width: 146 mm, Equipment: lighting, Mitutoyo PH3500 Profile Projector Used Mitutoyo PH3515F for sale in good condition. Manufacturer: Mitutoyo Type: PH3515F Built-in linear scale Magnification: 10x Display size: 353mm Digital angle measurement with 1' or 0.01° accuracy. Built-in linear scales for use with optional display counters. Nsdpfxswr U A Dj Adwskt +/-0.1% or less (contour), +/-0.15% or less (surface) Working area range X-axis horizontal movement: 254 Y-axis vertical movement: 152 Table size: 450x146 mm Light source: Halogen bulb 24V 150W Suitable for thread pitch measurement – ​​No blurred or distorted image when the workpiece is tilted. Still image on the bright screen in the living room. Standard dual fiber optic illumination. 14" (353 mm) diameter protractor screen with crosshairs and stepped lines for easy alignment. Digital angle measurement with 1' or 0.01° accuracy. Durable workpiece table features linear scales for fast and accurate measurement. Height: 1155mm Length: 1137mm Width: 467mm Weight: 155kg

Condition: like new (used), functionality: fully functional, Year of construction: 2025, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller diameter: 118 mm, overall weight: 220 kg, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, NEW!!! LFSS PK 30 Profile bending machine, pipe bender 30mm /ct2275/ Manufacturer: LFSS Type: PK30 Year of manufacture: 2025 Horizontal and vertical operation Rollers: 2 driven Upper roller up-down movement manually Nksdoxh D Nvopfx Adwjt Max. shaft diameter: 30 mm Working speed: 4 m/min Bending capacity: - Flat steel: 50 x 10 mm - Square 35 mm - Closed section: 40x 40 mm - Pipe 48 x 3 mm Power: 400 V / 0.75 kW 50Hz Electric foot switch with emergency stop Standard bending set Weight: approx. 200 kg CE certification Instructions in German or English Dimensions: W 700 x H 1450 x D:750 mm

Condition: new, – Middle shaft: 35 mm diameter – Bottom two shafts: 30 mm diameter – Rotates clockwise and counterclockwise – Can be used horizontally and vertically – Foot control – Emergency stop – Documentation Nedpfjwdnbqex Adwekt – 400V

Condition: excellent (used), Year of construction: 1992, Shaft diameter: 40 mm Bending capacity: Flat bar edgewise at 500 mm Ø: 60 x 10 mm Flat bar flatwise at 400 mm Ø: 100 x 15 mm Nkedex Anpvepfx Adwjt Square bar at 500 mm Ø: 35 mm Angle iron, leg outwards at 450 mm Ø: 50 x 50 x 6 mm Angle iron, leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-section, T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm Electrical connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 480 kg

Condition: used, Year of construction: 2006, Technical data: Working ranges: X-axis: 1870 mm Y-axis: 400 mm Z-axis: 560 mm C-axis speed: 3000 rpm Max. grinding area: 1700 x 620 mm without table dresser: 1500 x 620 mm Table dressing device, diamond wheel: ø 110 mm Grinding wheel diameter: 400 mm Max. width: 100 mm Grinding wheel bore: 127 mm Distance table to spindle center: 800 mm Table height: 900 mm Max. table load: 2200 kg Weight, approx.: 12,000 kg Nodpsxzq I Ssfx Adwokt Equipment: - Siemens SINUMERIK 840D control, OPO12 operator panel - Measuring system - Electro-magnetic clamping plate - Full enclosure - Central lubrication - Mist extraction - Clamping system for automatic wheel change - Coolant unit - Coolant recirculating chiller - Profiling device Water treatment system available at additional cost

Condition: ready for operation (used), Glue application with profile rollers 10 - 15 - 20mm Nkjdpelxx Dqofx Adwet

Condition: new, pipe diameter: 10-114: (2x) 50 x 940grinding belt speed: 3-22 Njdpfx Ajd Ab U Dedwokt

Condition: used, Year of construction: 1992, spindle diameter: 50 mm, milling spindle length: 545 mm, Longitudinal profile milling machine with lifting spindle 545mm long, diameter of lifting spindle D=50mm, motor 5.5kW. Nodpoua Swwefx Adwekt Glazing bead saw D=180mm, 2,2kW. Feed rate 2-4-6-12m/min

Condition: reconditioned (used), Year of construction: 1982, Mubea / Muhr and Bender BFL 350: - Combined Profile-/bar steel shears with hole punch and notcher - Punching force 35 tons - punches up to Ø 28/23 mm in 10/12 mm sheet thickness - cuts up to Ø 30 mm / ■ 28 mm /∟ 90 mm x 8 mm / 150 mm x 13 mm / 80 mm x 16 mm Nksdpfsium Stex Adwjt Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: good (used), Technical data: 2 rollers hydraulically adjustable 3 rollers driven Nsdst Ukqajpfx Adwskt Bending moment: 110 cm/3 Shaft diameter: 180 mm Roller diameter: 460 mm Main motor power: 15 kW Digital display Dimensions (length x width x height): approx. 2000 x 1700 x 1600 mm Weight: approx. 6.5 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: excellent (used), Technical specifications: 2 hydraulically adjustable rolls 3 driven rolls Roll diameter: 225 mm Shaft diameter: 75 mm Round steel: diameter 50 mm Square steel: 45 x 45 mm Flat steel: 200 x 20 mm Nkedpfexgukuex Adwet Angle steel: 75 x 15 mm Bending speed: 7 m/min Motor power: 4 kW Machine can operate horizontally or vertically Dimensions (L x W x H): approx. 1200 x 1100 x 1200 mm Weight: approx. 1.3 t The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2018, Manufacturer: INDUCTAFLEX Type: AL-3e Control system: ACCURATE touch screen Year of construction: 2018 3 rolls driven servo Torq each roller 3500 nM Electrically support rolls Intelligent software : Ellipse program U Bend shapes control of tangents Auto section detector Nkedpfxovd Dfte Adwjt Specifications Metric US Standard Horizontal and Vertical Horizontal Axis Ø 105 mm Number of rollers 3 Stroke X axis 0 - 400 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2700 mm weight 3300 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), Year of construction: 2004, Description to follow! Nkodpfx Adsxy S D Sjwjt

Condition: used, total length: 1,000 mm, total width: 750 mm, total height: 1,400 mm, Empty weight: 400 kg - Documentation available: No - CE certificate present: No - Shaft diameter [mm]: 50 - Capacity diameter round [mm]: 50 - Transport dimensions: 1000mm x 750mm x 1400mm (l x w x h) - Transport weight [kg]: 400kg Financial information Nsdpfxjwnia Ao Adwekt VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Roller sets for section bending machine, 3-roll ring bending machine HERKULES WETZLAR The rollers fit a section bending machine HERKULES WETZLAR type BO 238 N Shaft diameter: 60 mm with 18 mm keyway 2 rollers set No. 1, roller diameter = 110 mm, roller width = 180 mm 2 rollers set No. 2, roller diameter = 160 mm, roller width = 40 mm Nkodpeglaq Ijfx Adwet 3 rollers set No. 3, roller diameter = 150 mm, for tube diameter Ø 33 mm, roller width 87 / 115 mm - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm without keyway The machine had 2 driven rollers Total weight of all rollers: 57 kg Good condition