Used Profiling for sale (5,191)

Condition: good (used), The scope of delivery includes: 01x C-profile, used Manufacturer: SSI Schäfer profile dim.: C: 60 x 40 x 8 mm Material color: sendzimir galvanized total length: approx. 1.015 mm center-center-hole: approx. 975 mm Itsdpfx Abjnbfapocjd material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill holeØ: approx. 10 mm Remark: - Application area pallet racks - In double rack rows, push-through safety devices are required if the distance between the loading equipment or loading unit is less than 100 mm. - In single rack rows, push-through safety devices prevent load units from falling out unintentionally. - A push-through safety device can also be used to attach / mount rear wall grids. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: excellent (used), Mr: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Included in delivery: 01x C-profile, II. choice Manufacturer: SSI Schäfer Material color: sendzimir galvanized total length: approx. 1.510mm profile dim.: C 100x60x10 mm material thickness: approx. 3,0 mm Remark: - Since this is a used product may be damaged, holes, welds or other rust approaches may be present. General information about the item: Itodoh T Avxopfx Abcsd This item is offered for pickup only. A transport desired beyond that or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Technical data for the CS Sigma profile: Manufacturer: SSI Schäfer Type designation: CS 300-4.0 Included in delivery: 01x CS Sigma profile, II. choice Material color: sendzimir galvanized Total length: approx. 3.800 mm CS Sigma profile: approx. 300x75x15 mm Iedsibvnrspfx Abcstd material thickness: approx. 4,00 mm

Condition: like new (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used material color: sendzimir galvanized profile length: approx. 1.400 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 6,500 Kg Remark: The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Ijdpfxohwdu He Abcstd Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Iedpeidcg Ajfx Abcjtd Included in delivery: 01x CS Sigma profile, used material color: sendz. galvanized total length: approx. 4.450 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm material thickness: approx. 2,00 mm

Condition: used, Year of construction: 2001, total length: 1,200 mm, total width: 800 mm, total height: 1,700 mm, Empty weight: 500 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation Isdpfewu Tnkox Abcetd double foot pedal forfor- and backward drive - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 371 - Drive system: Conventional - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 1.1 - Shaft diameter [mm]: 50 - Transport dimensions: 1200mm x 800mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), METALLKRAFT Profile Steel Shear / Punch HPS 65 DS Combined Hydraulic Profile Steel Shear and Punch with Punching Station, Notching Station, and Flat Steel, Angle Steel, and Profile Steel Shear – enables simultaneous operation at punching and profile steel shear. Punching Station - Punching Force: 65 t - Punching Capacity: max. Ø 26 x 20 / Ø 57 x 10 mm* - Throat Depth: 305 mm - Stroke Length: max. 55 mm - Number of Strokes: 25 strokes/min - Working Height: 900 mm Rod Steel Shear - Cutting Capacity Round: max. Ø 45 mm* - Cutting Capacity Square: max. 45 x 45 mm* Angle Steel Shear - Cutting Capacity L-Profile 90°: 120 x 120 x 12 mm* - Cutting Capacity L-Profile 45°: 70 x 10 mm* - Cutting Capacity U/I Profile: 120 x 58 mm - Cutting Capacity T-Profile: 90 x 11 mm - Working Height: 1,140 mm Flat Steel Shear - Cutting Capacity 90°: max. 300 x 20 / 375 x 15 mm* - Miter Cut 45°: max. FL 100 x 15 mm* - Blade Length: 380 mm - Working Height: 900 mm Notching Station - Material Thickness: max. 10 mm* - Notching Width: max. 45 mm - Notching Depth: max. 90 mm - Notching Station: 100 x 100 x 10 mm Machine Data - Motor Power: 5.5 kW | 400 V - 50 Hz - Dimensions (LxWxH): 1700 x 950 x 1880 mm - Weight (net): approx. 1,600 kg Shipping on pallet via freight forwarder possible Europe-wide. Additional machines available! Take a look at our listings. If you have any questions, feel free to contact us by message or phone: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Ijdpfx Aexizansbcotd

Year of construction: 2005, condition: good (used), machine/vehicle number: C9 15840, Profile brushing machine Tagliabue LB 2 Model: LB 2 TECHNICAL DATA: Year of manufacture: 2005 Tagliabue edge sander with 4 oscillanting sanding units. Iedpsg Rn Iaefx Abcstd Two vertical rollers and 2 inner transversal rollers, for transversal brushing.

Condition: excellent (used), functionality: fully functional, CURVAPROFILI GAIANI DIAMETER 40 Itedjxzgnnjpfx Abcjd 3 ROLLERS HORIZONTAL USED MACHINE INTERNAL CODE: SVR 370

Condition: ready for operation (used), Year of construction: 1998, Travel X/Y/Z: 3200mm/300mm/250mm, speed: 18000rpm, motor power: 7.4kW, tool holder: SK30, tool positions: 8, tool changer: turret, materials processed: aluminum/steel (max. 5mm thick)/PVC (steel-reinforced and unreinforced), wood and plastics. Documentation available. On-site inspection is possible. Itedpeuzlfajfx Abcjd

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Iodpfxexp Rb Io Abcjtd

Condition: ready for operation (used), Mitutoyo PJ321F, projection lens: 10x/20x/50x/100x, projection screen: 315mm, material: finely ground glass, rotation range: +/-360°, angle display: digital, resolution: 0.01°, contour illumination: +/-0.1%. On-site inspection is possible. Ijdpfowgnf Uox Abcotd

Condition: ready for operation (used), A profile hardening system (inductor) AEG-Elotherm Elomat V/N/180/3 is available. The nominal output is 200kW. The system is fully functional and is offered including various coils. Itedpfx Asttv Trebced

Condition: ready for operation (used), Year of construction: 2018, Machining sides: 3, workpiece materials: aluminium/steel, travel X: 4000mm, feed rate: 120m/min, A-axis: +/-110°, spindle speed: 18000rpm, tool holder: SK30, tool positions: 8, max. profile dimensions X/Y/Z: 4000mm/250mm/190mm, machine dimensions X/Y/Z: approx. 5750mm/2100mm/2350mm, weight: approx. 4000kg, control: Mecal. Documentation available. On-site inspection is possible. Itsdpfjyh Nv Hsx Abcsd

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 12100mm/2350mm/800mm, swivel A-axis: +/-98°, rapid traverse X/Y/Z/A: 45/45/24/10 m/min, processing length: 11000mm, speed: 24000 rpm, table: 10 support crossbars, 2 hydraulically swiveling workpiece stops, control: BWO 930, operating hours: 23792h, dimensions X/Y: 18300mm/6250mm. Including moving gantry version with Gentry drive on both sides, coolant spraying system with minimum quantity fine atomization. Documentation available. Iodotqfqxepfx Abcetd

Year of construction: 2012, condition: ready for operation (used), An Amada CNC 5-axis profile grinding center including an extraction and filtration unit is available. Travel X/Y/Z: 300mm/250mm/88mm, rapid traverse X/Y: 2000mm/min, rapid traverse Z: 500mm/min, max. workpiece diameter: 80mm, max. workpiece weight: 4kg, chuck diameter: 150mm, positioning resolution: 0.0001mm, positioning accuracy X/Y: +/-0.05µm, repeatability: +/-0.2µm, rotary table: 360°, rotary table resolution: 0.0001°. Grinding wheel dimensions X/Y/Z: 75mm-100mm/4mm-6mm/22.23mm, spindle speed: 20000rpm. Machine dimensions X/Y/Z: approx. 1650mm/2100mm/1750mm, weight: approx. 4000kg, control: Fanuc Series 32i-B. Including Amada Wasino TWCE extraction and filtration unit. Documentation available. An on-site inspection is possible. The machine is located in China. Itedpfx Ajxfknaebcod

Condition: used, Year of construction: 1995, Technical details: grinding length: 1250 mm grinding width: 600 mm workpiece height: 730 mm table surface area: 1720 x 500 mm headstock: dist. table - spindle center: 900 mm max. longitudinal movement: X-1450 feed range: 10 - 20.000 mm/min vertical movement: Y-730 mm feed range: 0,2 - 3.000 mm/min cross travel: Z-550 mm feed range: 5 - 5.000 mm/min power capacity: 1500 U/min.- 44 kW / 8000 U/min. - 38 kW kW grinding wheel turining speeds: 50-6.000 U/min cutting speed: max. 80 m/sec. weight of the machine ca.: 11 t with CNC SIEMENS 840 C auto. dynamic balncing system integrated in the grinding conus profile grinding unit ( on table mounted ) Diamant profile rollers ( dia. max 140 mm , width max. 200 mm, hole 52 H3 ) speed 3000 rpm Isdpfxex Uzvpo Abcstd two magnetic plates ( 1000 x 400 mm, 1200 x 350 mm ) divers Flanges ect. *

Year of construction: 2010, condition: used, METAL SHEET PROFILING LINE FOR TILE ROOF PANELS Reduced price due to urgent sale Scope of supply 1 Uncoiler 2 Front shear + coil guide table 3 Film applicator 4 Base parts of cassette type forming machine 5 Roll forming machine for roof tile for "COPPO" 6 Roll forming machine for rooftile for "ATIIKA" 7 Roll forming machine for rooftile for "T177.5" 8 Shearing (Cut-off) machine: Flying type 9 Drawing part 10 Auto stacker 11 Electric control panel Technical specifications - Manufacturer: IL Kwang (Korea) - Manufacturing: Year 2010 - Material: Pre-painted, galvanized steel sheet (ASTM A 526/ JIS G 3302 SGCC) - Tensile strength: 250 ~ 320 MPA - Max. coil width: 1250 mm - Coil thickness: 0.35 – 0.8 mm - Max. coil weight: 15 ton - Outer coil diameter: Max. 1300 mm - Inner coil diameter: 508 mm - Line speed (length > 5 m): Max. 8 m/min - Speed control: Frequency control by inverter - Commercial voltage: 380 / 50 V/Hz 3 Phases - Surface (LxWxH): Approx. 30 x 8 x 5 m Brand of components - Motor: Siemens (ICE. type) - PLC + Inverter: Siemens 7 - Servo: Mitsubishi (with C.E ) - Touch screen: Pro-face (with C.E.) - Electric components: L.G (with C.E.) Commercial voltage: 380 / 50 V/Hz 3 Phases Line speed (length > 5 m): Max. 8 m/min Material: Pre-painted, galvanized steel sheet (ASTM A 526/ JIS G 3302 SGCC) Tensile strength: 250 ~ 320 MPA Max. coil width: 1250 mm Coil thickness: 0.35 – 0.8 mm Max. coil weight: 15 ton Outer coil diameter: Max. 1300 mm Motor: Siemens (ICE. type) PLC + Inverter: Siemens 7 Servo: Mitsubishi (with C.E ) Touch screen: Pro-face (with C.E.) Iodpfx Abeymbfyjcetd Electric components: L.G (with C.E.) Speed control: Frequency control by inverter Inner coil diameter: 508 mm Surface (LxWxH): Approx. 30 x 8 x 5 m

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Iedswprmzspfx Abcotd Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force

Condition: good (used), Year of construction: 2013, Profile machining center Axis travel X-axis: 7430 mm Y-axis: 1320 mm Z-axis: 500 mm A-axis: +/-90° Working areas X-axis: 7460 mm Iedjvy E Ibepfx Abcotd Y-axis: 650 mm Z-axis: 250 mm 8 clamping elements Automatic tool magazine with 8 places in a protected housing, for drilling, milling and thread cutting tools, angle head and disc milling cutter, max. Ø 200 mm, + 2 places for 2 angle heads Tool holder ISO 30 In pendulum operation (2 zone machining) the working stroke per zone is limited to 3500 mm

Condition: new, shaft diameter: 60 mm, – Shaft diameter 60 mm – The lower two rollers are hydraulically adjusted – Usable in horizontal/vertical position – Three driven rolls – NC control (7-inch touchscreen) – 2 speeds – Brake motor – Overload protection system – Roller diameter Ø177 mm – Emergency stop – Documentation Isdpfx Aboyh R Hajcetd – 400V

Condition: used, Technical details: x-travel: ca.1000 mm y-travel: 400 mm z-travel: 420 mm control: Siemens Sinumerik 805/810 thread cutting up to max.: M 22 bore capacity in St 60 - full boring: 25 mm milling area: Leistung in St 60:150 mm sawing stroke: ca. 55mm mm range of revolutions per minute - continous: 20-6000 U/min Number of working hours: manual 26180 h tool turret: 12 Plätze/places tool taper: SK 40 total power requirement: 18 kVA weight of the machine ca.: 5,0 t machine dimensions LxWxH: 2,9x2,5x2,8 m transport measurements machine: 2,4x2,6x2,75 m Equipment: - special equipment/device ( modulating clamping system) for milling jobs of profile materials with an automatic longtitudinal cutting to length device for workpieces via circular saw module. (without functionality) - hotrizontal tool clamping ( force fitted) with vise clamping system and parallel ledges.(momentarily approx. 80mm) - tool changer type Chiron - basket tool changer - tool clamping mechanically locked, infeed force 5000N - swarf conveyor make Knoll - loading and unloading system FMB LM RP 3000 Iodpfx Absu Idnmjcotd The machine is not fuctional. On sale as is for a small budget i.D. *

Condition: like new (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 956158, control type: manual, number of rollers: 3, shaft diameter: 75 mm, overall weight: 1,300 kg, total length: 1,000 mm, total width: 1,130 mm, total height: 1,100 mm, power: 4 kW (5.44 HP), input voltage: 380 V, We can offer you a ROUNDO (Sweden) electro-hydraulic profile bending machine Model: R-3 Capacity: 14 cm³ Machine no.: 956158 Delivered to agent: 10-1995 Delivered to customer: 26-07-1996 Dimensions: 1 x 1.13 x 1.1 m Weight: 1300 kg Shaft diameter: Ø 75 mm Motor power: 4 kW - Hydraulic machine - Can operate in horizontal or vertical position - 3 driven rolls Included: Brake motor Itedpexl Sq Ajfx Abcod Push-button control Digital readout 1 extra set of rolls for tube Ø 48 and Ø 42 mm Dutch-language manual Price for the ROUNDO section bending machine, model R-3: on request via email The machine has its original paint and has been used very little! Delivery conditions: Delivery time: available from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: prior to collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that trades and stocks mainly used Kardex Remstar VLM automatic lift (shuttle systems) & rotary storage systems (paternoster systems). See our website for current stock. We assemble and/or dismantle these systems safely with VCA-certified technicians and have been doing so for over 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–B 5111 PA Baarle-Nassau The Netherlands

Condition: used, Year of construction: 2013, CNC profile processing center by Stegherr, model GLS-2, year of manufacture approx. 2013, Beckhoff control system type CP3919, serial no. 143/0613-1. Free sale. Please send us your offer. Itodpfx Abjx Natcoced

Condition: new, functionality: fully functional, Year of construction: 2026, New three rolls angle roll Roundo R3 with tools, digital readout and remote control. Ijdpfx Abod N Ahdjcstd