Used Proof Press for sale (28,538)

Condition: excellent (used), Year of construction: 2021, BAYKAL (Made in Turkiye) MODEL: HNC6110 10t x 6070mm Manufactured Year: 2021 Official Net Weight (based on the catalog of the manufacturer): 30,000kg Dcedpexyvkcofx Addjr Actual weight is around 28,000 ~ 29,000kg Immediate FOB Port price is available. Very good condition.

Condition: excellent (used), Shelf press Manni 2500×1300 Shelf length: 2500 mm Shelf width: 1300 mm Press with 4 hydraulic cylinders Dcjdpfx Aexyvyksdder Shelves heated by water from central heating

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 364, Ice cream cones making machine, make COMACO Alimentare, model UNIRUS UR2, MFG: 2018, SN: 364, amperage 25A; power supply 380V, the consumption is 9 Kw, frequency: 50/60 Hz; the machine has a mould with 2 rows, with 7 cavities in each row, the total amount of rows in the mould are 14. The max diameter of the cone measured in mm is 80. The production average productivity with cycle of 2 minutes and temperature of 45 C⁰ is 420 cones. The production average productivity with cycle of 1 minutes and temperature of 45 C⁰ is 480 cones. Semi-automatic machine with inter changeable molds for making ice cream cones. The machine make’s cups and double cones of various size and capacities. The mould is opening and closed by hand. The moulds are field through a special feed device. Heating is made be electric supply 380V. The cones are automatically ejected into a container at the bottom of the machine when the lower mould is operated. Temperature control is automatic: the machine maintain the preset temperature until as signal (visual and audible) indicates the end of the cooking time. Price: 16.000 Euro + VAT, negotiable; Incoterms condition 2025, FCA, Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten/Subject to errors, changes and prior sale/ Dcedpfox Dzifjx Addor

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Dsdpfx Adjvbcxtsdocr Main motor 41kw Movie available

Condition: excellent (used), Year of construction: 1988, MAN ROLAND 4 COLOURS OFFSET PRINTING MACHINE • TYPE : R 804 • SIZE : 100 x 140 cm • COPY : 56 Mil. • YEAR : 1988 (Serial Nr: 848) DETAILS: Rolandmatic Dsdpfxexy I Nqs Addecr RC2 Automatic Washing Devices IR Dryer Quick Action Plate Clamps Power Sprayer Very Good Condition Immediately Available

Condition: ready for operation (used), Year of construction: 2000, operating hours: 59,827 h, General Data Machine weight 16600 kg Main Drive Pressing force 2000 kN This HAMMERLE BM 200 - 3100 press brake was manufactured in 2000. It is a robust and reliable machine, ideal for bending applications. Consider the opportunity to buy this HAMMERLE BM 200 - 3100 press brake. Contact us for more information. Dcodpfx Adex D Ni Toder Application Types Bending

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, max. pressing force: 130 tonnes Dodpfxsx D Tv Rs Addocr max. bending length: 3 metres

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm Dodpfxjx Dmq Ij Addjcr piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 4785, product width (max.): 300 mm, working width: 290 mm, roll width: 290 mm, type of input current: three-phase, overall weight: 11,000 kg, total height: 2,200 mm, total length: 10,200 mm, total width: 2,000 mm, Equipment: documentation/manual, Description: We are offering this Nilpeter B 3000 at a fantastic price due to an urgent business need. This machine has been well-maintained and is ready to deliver high-quality output for your printing needs. Don’t miss out on this opportunity!1× NILPETER B-3000, year: 1994, 6 x UV letterpress + UV drying, 1 x UV flexo + UV/ 3 x rotary cutting station, 1 x unwinding station, 1 x rewinding station, 1 x rewinding station, 5 x automatic control for magnet processing, 1 x corona print, electronic control of cylinder registers, plenty of print and magnetic cylinders and spare parts Possible exchange for another machine .Nilpeter B 3000 ,year 1994 . Dsdpfxjv Rpc Re Addecr - 6 x UV letterpress + UV drying, 1 x UV flexo , 3 x rotary die-cutting station, 1 x unwind station, 1 x rewind station, 5 x automatic electronic register control + Corona treatment, 1 turn bar, • Max. Web Width: 300mm,min web width 110mm, • Spare uv box for screen station, Command unit for the uv station plenty of rubber rollers for uv unit... • Operating instructions and electrical diagrams in English Possible exchange for another machine

Condition: new, The KNWP 50 M is a top-of-the-line manual workshop press designed for various applications in the Workshop Presses category, particularly in the Manual Workshop Press group. Built in Europe, this robust hydraulic press is ideal for assembly, straightening work, and testing workpieces in mechanical workshops, garages, and locksmiths. Its features include a manually operated hydraulic pump with both hand and foot control, a rigid machine frame made from a carefully machined weldment structure, and adjustable table height for enhanced versatility. The 2-step hydraulics allow you to switch between quick-stroke and work stroke effortlessly. This 50-ton press simplifies tasks such as the removal and installation of bearings and bolt pressing while ensuring safe and professional operations. The included material support and multi-function die enhance productivity, making it an essential tool for professionals. For further inquiries and to explore your options, request a quote today. Dcsdpfx Adsuyh Twjdor

Condition: used, Year of construction: 1997, Pressure 500 t distance between columns 1550 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1200 x 1300 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 150 mm die cushion area 950 x 950 mm table height over floor 1245 mm side window 1250 mm ram surface 1200 x 1300 mm speed down 750 mm/s speed up 780 mm/s working speed 105 mm/s oil volume 4000 l power requirement 263,0 kW weight 45,0 t Dimensions (WxDxH) 3,3 x 3,3 x 6,1 m Dcedpfjvuk T Eox Addjr height over floor 6,1 m YOM 1978 - overhaul 1997 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, pneumatic ejector in ram (0,5 t), cutting impact cushioning with depth stop (motoric adjustable), mechanical ram interlocking in TDC as is where is, WITHOUT putting into operation

Condition: excellent (used), Year of construction: 2006, Dimensin: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Dodpfx Aox Dmqhjddecr Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: used, Year of construction: 1979, pressure 63 t stroke 200 mm throat 320 mm dayligth 450 mm Dedovzxrcspfx Addscr table surface area 750 x 600 mm die cushion capacity 6,5 t die cushion stroke 80 mm die cushion area 240 mm table height over floor 800 mm ram surface 500 x 450 mm feed down 300 mm/s feed up 300 mm/s working feed 50 mm/s oil volume 380 l power requirement 12,0 kW Weight 6,5 t dimensions of the machine ca. 1,3 x 2,0 x 2,75 mxmxm with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram (approx. 0,5 t / 70 mm), hydraulic cutting impact cushioning, mechanical depth stop as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Dcodpjx Dmp Rofx Addsr Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Year of construction: 1998, pressure 3500 t stroke 900 mm Distance table / ram, stroke down 1000 mm distance table / ram, stroke up 1900 mm table surface area 3150 x 2150 mm ram surface 3150 x 2150 mm Total Weight of Tool max. 30,0 t Weight of Tool Top Part max. 20,0 t Djdpfovuukhox Addocr speed down 400 mm/s working speed 0,9 - 9,2 mm/s Hydraulic Operating Pressure 280 bar oil volume 5500 l rated current 760 A voltage 400 V frequency 50 Hz power requirement 425 kW weight 231,0 t Hydroformpress / IHU-Press maximum preforming force approx. 1000 t Total tool weight approx. 30 t upper tool weight approx. 20 t · Die function interface: 4 controlled axis, 3 b/w functions slide, 4 b/w functions bed · Parallelism control: over the length side of the press · Light curtain: front and back side · Light barrier: left and right side · Slide locking: TDC-Position · Two-hand control panel: 1 · Independent high pressure circles water hydraulic system: 2 · Max. working pressure: 3.000 bar · Displaced volume of each Intensifier: 3,74l · 2 Filling pumps: volume and pressure depending the power grid · Location of pressure intensifier: to be determined · Main pumps: located on the press crown/oil tank · One die change table: 6,7 x 2,15 m · Max. die size: 3,15 x 2,15 m · Clamps on slide: Hydraulic · Clamps on the bed: Mechanical · Electrical control: Schuler Multiview HF Attention: This machine is a EU re-import! If the machine is to be installed and operated in the EU, it must be adapted to the currently valid EU directives of the country of installation before it is put into operation This work is not part of the offered price as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Dodox Dmn Tspfx Addjcr Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: used, Year of construction: 1996, pressure 100 t distance between columns 1525 mm stroke 450 mm Dodpfxovuufxs Addjcr distance table/ram, max. stroke up, adjustment up 850 mm table surface area 1500 x 1150 mm pressure of drawing cushion in table 30 t stroke of drawing cushion in table 150 mm table height over floor 940 mm side window 480 mm ram surface 1500 x 1150 mm oil volume 1200 l weight 25,0 t dimensions (WxDxH) 4,2 x 1,75 x 5,1 m light guard Sick permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, mechanical depth stop No foundation pit necessary 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: used, Year of construction: 1973, pressure 500 t Djdpfx Adevuk Euedscr distance between columns 1620 mm stroke 40 - 160 mm no. of strokes 32 / 48 Hub/min dayligth (stroke and adjustment up) 660 mm column travel -side 400 x 430 mm table surface area 1600 x 1300 mm table height over floor 750 mm ram surface 1400 x 1200 mm power requirement 44,0 / 66,0 kW weight of the machine ca. 56,00 t required space 3,55 x 2,55 x 5,1 m with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation Video of 'sister maschine' available

Condition: used, Year of construction: 2003, pressure 63 t stroke 10 - 120 mm no. of strokes 40 - 120 /min throat 280 mm passage to the back 325 mm dayligth 430 mm table surface area 820 x 580 mm hole in the table 200 mm table height over floor 830 mm ram surface 470 x 340 mm ram adjustment 100 mm power requirement 4,0 kW Weight 5,20 t dimensions of the machine ca. 1,3 x 1,7 x 3,1 m x m x m THE PRESS IS READY FOR USE IMMEDIATELY ! permitted for manual loading according to the CE-norm Dcsdpfxjvzxttj Addor with infinitely variable drive, pneumatic clutch/brake combination (NEW IN 2025), light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, two-hand and foot operation

Condition: used, Year of construction: 1977, pressure 250 t distance between columns 930 mm stroke 200 mm Distance table/ram, stroke up 600 mm table surface area 900 x 860 mm die cushion capacity 100 t die cushion stroke 50 mm die cushion area 350 x 400 mm table height over floor 950 mm side window 380 x 380 mm ram surface 850 x 700 mm feed down 400 mm/s feed up 400 mm/s working feed 30 mm/s oil volume 350 l Dodpfxjvuk Trs Addjcr power capacity 45,0 kW weight 11,5 t Dimensions (WxDxH) 2,0 x 1,2 x 3,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oilhydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, mechanical depth stop with hydraulic cutting impact cushioning no foundation pit necessary as is where is, WITHOUT putting into operation / WITHOUT additional work

Condition: used, Year of construction: 1987, pressure 65 t distance between columns 930 mm stroke 1100 mm distance table/ram, stroke up 1300 mm table surface area 1340x1084 mm hole in the table 604 x 404 mm table height over floor 1000 mm side window 705 mm ram surface 1230 x 990 mm speed down 620 mm/s speed up 207 mm/s working speed 320 mm/s oil volume 450 l power requirement 15,5 kW weight 8,0 t dimensions (WxDxH) 2,8 x 2,6 x 4,85 m hydraulic fast-stroke trimming press for die-cast parts with oilhydraulic drive, hydraulic shifting devices (4x), hydraulic blank holder in BDC / ejector in TDC in ram, ram interlocking device table surface 1340 x 705 mm or 930 x 1084 mm ram surface 1230 x 705 mm or 930 x 990 mm Dcedpfovuk Szex Adder Insert plate in table with opening 320 x 260 mm as is where is, WITHOUT putting into operation / WITHOUT additional work

Condition: used, Year of construction: 1987, Pressure 080 t throat 380 mm stroke 8 - 112 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 472 mm table surface area 840 x 610 mm table height over floor 800 mm passage to the back 520 mm ram surface 650 x 400 mm ram adjustment 70 mm power capacity 7,5 kW Dodevuk Snopfx Addscr weight 6,9 t Dimensions (WxDxH) 1,1 x 2,15 x 3,2 m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, mechanical overload protection in ram, tie rods to improve rigidity of the press body, two-hand operation as is where is, WITHOUT electrical cabinet / WITHOUT additional work The putting into operation in our warehouse (with new control) / Safety adaptations / mechanical overhaul can be offered additionally on request

Condition: used, Year of construction: 1988, pressure 100 t distance between columns 1180 mm stroke 1 - 120 mm no. of strokes 90 /min distance table/ram, stroke up 470 mm table surface area 1100 x 700 mm table height over floor 800 mm side window 400 mm ram surface 740 x 350 mm ram adjustment 100 mm power requirement 37,0 kW weight 11,0 t dimensions (WxDxH) 2,3 x 2,0 x 3,5 m Dcodovzxtajpfx Addjr difference-way press with hydraulic driven knuckle-joint system, controllable dependent on pressure and way, two-hand operation No foundation pit necessary as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request T-slots in table and ram according to customer's specification - price on request

Condition: used, Year of construction: 1969, pressure 050 t throat 260 mm stroke 8 - 120 mm no. of strokes 100 /min distance table/ram, max. stroke up, adjustment up 410 mm table surface area 650 x 500 mm hole in the table 250 x 180 mm Dcsdpfxovzxr Nj Addjr table height over floor 740 - 980 mm table adjustable 240 mm ram surface 400 x 180 mm ram adjustment 70 mm power requirement 2,2 kW weight 2,3 t dimensions (WxDxH) 1,2 x 1,4 x 2,3 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, rolling key clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1977, pressure 050 t Dsdpfxjvzxr Ao Addscr throat 255 mm stroke 8 - 120 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 640 x 500 mm hole in the table 250 x 180 mm table height over floor 710 - 930 mm table adjustable 220 mm ram surface 550 x 170 mm ram adjustment 70 mm power requirement 4,0 kW weight 3,1 t dimensions (WxDxH) 1,5 x 1,5 x 2,3 m year of manufacture 1951 - modernized 1977 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual central lubrication, foot operation as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request