Used Ptk 31 for sale (5,156)

Condition: used, Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Klöckner Moeller, Auxiliary contactor Cntactor Relay unused Ovp -Type: DIL ER-31-G -Voltage: 60 VDC Fedpfer Im R Rox Afpefu -Number: 15x contactors available -Price per piece -Dimensions box: 60/50/H60 mm -Weight: 0.2 kg/piece

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 31 rpm -Power: 0.37 kW Fodpfjb E N T Nox Afpefu -1x Type: FZOD044S -3x Type: FZOD71N13-4 -Design: B14 -Shaft diameter: 25 mm -Protection class: IP 33 -Number: 2x geared motors available Price: per piece -Dimensions: 380/170/H120 mm -Weight: 15 kg

Condition: used, Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor Ffjdpfxop Udhye Afpeu -Type KAF37 DRS71S4BE05HR/MM03/AMA6 i = 44.46 -Drive motor: with frequency converter MM03D-503-00 -Speed: 31 - 6.3 rpm -Power: 0.37/0.075 kW -Shaft: Ø 25 x 50 mm on both sides -Protection rating: IP54 -Quantity: 1x geared motor available -Price per piece -Dimensions: 470/290/H210 mm -Weight: 26kg

Condition: used, Year of construction: 1994, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 3.0 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min back stop - adjustable 5.0 - 750 mm oil volume 120 ltr. engine output 7.5 kW weight 6400 kg. range L-W-H 4045 x 1783 x 1750 mm Good condition (!!) According to the previous seller, with very few operating hours From a maintenance workshop Equipment: - Robust electro-hydraulic sheet metal shear * Design: Guide rail - LVD control panel centrally located on the front of the machine - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment * Adjustment from the front - via handwheel * Including analog value display - Electro-motor-driven backgauge with recirculating ball screws * Continuously variable adjustment range * Analog position display * Rapid traverse possible - Ball transfer units + recessed grips in the support table - Front finger guard - 1x freely movable foot switch - 2x emergency stop buttons at the front - Original operating instructions * Special accessories included: Ffjdpfx Ajxaap Nefpou - LVD movable sheet support device for thin sheet metal blanks - 1x LVD extra-long side stop (3.000 mm) with Support leg - 1x LVD used set of replacement blades

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard Fjdpfexab Tvjx Afpjfu - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: used, Year of construction: 2020, total length: 2,000 mm, total width: 2,500 mm, total height: 2,100 mm, Price: On request - Machine available from: 2025-12-15 - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1000040377 - Main motor power [kW]: 10 - Number of milling spindles [pcs]: 1 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 10 - Vertical drilling unit: Yes - Saw unit present: Yes - Voltage [V]: 400 - Current consumption [A]: 18 Fjdpjx Ad R Nefx Afpjfu - Fuse [A]: 32 - Power [kW]: 10.0 - Transport dimensions: 2000mm x 2500mm x 2100mm (l x w x h) - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, LVD Shear Type HST C-10/31 Capacity 3000 x 10 Ffedpfjx Tqtbjx Afpsu

Condition: new, machine/vehicle number: 637ca014c140e4e48dc3231a0, empty load weight: 5,900 kg, maximum load weight: 29,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22,5, Further information Chassis tipper semi-trailer Fine-grained steel welded construction, in basic lightweight design, fifth wheel plate with interchangeable 2 kingpins Patented curved front end Telescopic support in the middle, unhitching with load not possible, when unhitched the vehicle must be at an angle to the rear. Wheel chocks with holder Underride guard, foldable Half-shell mudguards Integrated mudguard holder Stone-repellent surface with anti-spray flaps on last axle only Tarpaulin pole with bracket Tow hook at the rear Axles+suspension SAF disc brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axles in off-road version, Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Automatic tilt lowering with shut-off valve Wheels and tires 385/65 R22.5 Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red rear lane departure lights Fjdpji Rivdjfx Afpofu 2 x 7-pin interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK screw socket, fixed part, NW 48 mm (without hose connection). Hydraulic actuation via truck power take-off Troughs Round steel body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic en with access to front wall. Greenline - conical and aerodynamic body shape Bucket and brush holder on the outside of the front wall. Membrane rear wall Rear wall as swing flap with double-jointed hinge, resting on the outside with double hook lock. 2 clamping screws with toggle fasteners at the bottom side. Side walls 4 mm thick throughout, base 4/5 mm thick, wear and weight-optimized design, Standing platform with step, connection plate for air/electric and brake with large clearance for optimum operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Germany Test approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE - 70 Contour markings with reflective strips to ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray10-year warranty

Condition: used, empty load weight: 5,560 kg, maximum load weight: 29,440 kg, overall weight: 35,000 kg, first registration: 09/2010, next inspection (TÜV): 09/2025, loading space length: 8,050 mm, loading space width: 2,300 mm, loading space height: 1,700 mm, loading space volume: 31 m³, suspension: air, tire size: 385/65 R 22,5, color: other, gearing type: other, front tire size: 385/65 R 22,5, driver cabin: other, emission class: none, * Aluminum rims * Operator's station * Air pressure gauge * Independent fenders * Double lift axle * Tipper without chute Fjdpfowcawhex Afpjfu * Roll-up tarpaulin * Reversing lights * Disc brakes * Folding underride guard We expressly reserve the right to sell this item prior to purchase, as we also offer this item on other portals. Accessories are provided without warranty, subject to change, prior sale, or errors. We offer and strongly recommend a viewing and inspection to ensure that the buyer is not misled about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired. We will handle all formalities and hand over the vehicle with the desired transfer license plates for an additional charge. Some images have been edited and are for illustrative purposes only. If you are interested, please contact us and request current images.

Condition: like new (used), For sale is a lot of high-quality aluminum industrial profiles with large cross-sections. The profiles are as new & unused, making them ideal for applications in mechanical and plant engineering, fixture construction, frame building, or hall construction. Technical data: Quantity: 30 pieces of 5.27 m each + 1 piece of 4.04 m Cross-section: 130 mm x 50 mm Total length: 161.14 m Material: aluminum extruded profiles Total weight: approx. 725 kg Profile type: T-slot profile / construction profile / industrial profile (solid, multi-chamber) Ffjdpfxsxbyx He Afpou Features: Highly stable and torsion-resistant Lightweight and easy to process Corrosion-resistant Ideal for load-bearing structures Condition: As new / unused Minor storage marks possible Logistics: Goods bundled on pallets Collection by arrangement possible Shipping available on request for an additional charge

Condition: excellent (used), functionality: fully functional, overall weight: 750 kg, Year of construction: 2016, operating hours: 1,236 h, Equipment: trailer coupling, Compressor 3100 l/min on trailer in very good condition 750 kg Fedpfx Afeycw Ngspofu

Condition: ready for operation (used), Year of construction: 1977, Lehbrink Mitre Milling Machine Type: WL 31 The machine can process PVC- and paper-coated as well as veneered panels, providing edge folding or edge doubling. Fsdsx N A Amepfx Afpefu The WL 31 is constructed on a robust solid steel subframe, guaranteeing absolutely vibration-free processing of workpieces. Various processing units available The machine is still in operation and can be inspected. Location: ex-works customer - immediately available - Machine must be dismantled by the seller.

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, number of seats: 31, gearing type: automatic, emission class: euro6, color: black, brakes: retarder, Year of construction: 2026, Equipment: ABS, air conditioning, parking heater,

Condition: used, functionality: fully functional, Year of construction: 1980, control type: NC control, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, input voltage: 380 V, input frequency: 50 Hz, overall weight: 19,000 kg, total length: 4,500 mm, total width: 3,200 mm, total height: 2,900 mm, number of support arms: 2, We are offering a reliable LVD Hydraulic Shear, Model MG-31/16-20, at a very attractive price. Key specifications: • Cutting capacity: Up to 20 mm • Year of manufacture: 1980 • Weight: 19,000 kg Fsdpjxg I T Nofx Afpsfu • Transport dimensions: 2350 x 4300 mm, height 2900 mm • Location: Slovenia This is a solid, proven machine that’s ready for heavy-duty use.

Condition: used, Year of construction: 2004, machine/vehicle number: P020504, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Delem, controller model: DA-66W, bending force (max.): 130 t, working width: 3,150 mm, stroke length: 350 mm, throat depth: 500 mm, distance between stands: 2,600 mm, installation height: 550 mm, operating speed: 10 mm/s, reverse speed: 115 mm/s, number of axes: 6, table height: 950 mm, type of crowning: CNC-controlled, oil tank capacity: 160 l, travel distance X-axis: 500 mm, back gauge adjustment: CNC-controlled, back gauge speed R-axis: 100 mm/s, back gauge travel distance R-axis: 160 mm, overall weight: 13,500 kg, total length: 2,300 mm, total width: 4,000 mm, total height: 3,100 mm, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, lower tooling, safety light barrier, upper tooling, Offered machine: Used CNC hydraulic press brake Manufacturer: CR Electronic Model: GOLD 130/31 Year of manufacture: 2004 Control: Delem DA-66W (8-axis capable) Condition: used, fully functional (Z axes currently not operational, see details below) Technical Specifications: - Pressing force: 1,300 kN (130 t) - Bending length: 3,100 mm - Distance between uprights: 2,600 mm - CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 (Note: Z1 and Z2 are currently electronically non-operational – new servo drives required. Manual adjustment possible.) - Stroke: 350 mm Ffodpfx Ajw A Rggofpou - Install height: 550 mm - Throat depth: 500 mm - Backgauge (X): 600 mm - Table height: 950 mm - Working speed: 10 mm/s - Return speed: 115 mm/s - Motor power: 11 kW - Operating pressure: 275 bar - Weight: approx. 13,500 kg Equipment & Features: - CNC-controlled hydraulic crowning - Quick-change system tool holders top & bottom - Manual quick-clamping of top tools - Laser optical finger guard (safety light curtain) - PLC-based diagnostic system - 2 support arms with quick adjustment - Operating manuals available - CE compliant Included accessories: - Fully equipped tool cabinet - Top tool 88°, full bending length - Top tool 35°, full bending length - Top radius bending tool - V8 T-die, full bending length - V12 T-die, full bending length - Flattening die, approx. 2,000 mm length Condition / Remarks: - The machine is well-maintained, currently connected - Inspection and trial run under power possible onsite - Z1/Z2 currently not functional – new servo controllers required - The machine is being sold due to a planned modernization and replacement by a new press brake.

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump -Spare part E forklift -Power supply: 24 volts Fjdpjb A Nabsfx Afpofu -Power: 2.8 kW -Speed: 1600 rpm -Hydraulic tank -Weight: 70 kg

Condition: good (used), Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 32.5 rpm -Power: 0.75kW -Angle Ffedpfjciq D Hjx Afpsu -Type: B5 -Diameter shaft: Ø 35 mm -Brake: 24V -Protection class: IP 65 -Number: 1x geared motors available -Price per piece -Dimensions: 560/300/H240 mm -Weight: 42kg

Condition: excellent (used), Here we offer a LDS Cooling Fan. LDS Fan Maximum Speed: 2855 RPM. Power supply 415V 3PH 50Hz Type: V870 50Hz Fjdjn Arayepfx Afpofu Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), mileage: 8,76,343 km, power: 599 kW (814.41 HP), first registration: 10/1999, fuel type: diesel, number of seats: 31, gearing type: mechanical, axle configuration: 4x2, emission class: euro2, suspension: steel-air, tire size: 215/75 R17.5, total length: 8,100 mm, total width: 2,300 mm, total height: 2,850 mm, Year of construction: 1999, Equipment: ABS, air conditioning, = Additional options and accessories = Fsdpfowdnc Iox Afpefu - Radio/CD player = Notes = TRANSPORT TO ANTWERP 590 EURO = Additional information = Number of doors: 3 Transmission: 6-speed, manual Tyre size: 215/75 R17.5 Front axle: Steered; Suspension: Leaf spring Rear axle: Twin tyres; Suspension: Air suspension Unladen weight: 5,100 kg Technical condition: very good Optical condition: very good Reference number: 7

Condition: good (used), Contactor, semiconductor contactor, contactor Ffodpfx Aob A N Acefpeu -Us: DC 24V -Price: per piece -Quantity: 4 pieces available -Weight: 0.7 kg

Condition: good (used), geared motor, electric motor -with: integrated frequency converter -Speed: 92 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 17 mm -Protection class: IP 54 -Weight: 10 kg Fedpfx Afjb A N D Repsfu

Condition: good (used), geared motor, electric motor -Speed: 53 rpm -Power: 0.18 kW Fedpfxjb A Rmde Afpefu -Design: B5 -Shaft diameter: Ø 17 mm -Brake: 24 V -Protection class: IP 65 -Weight: 8 kg

Condition: good (used), geared motor, electric motor -Speed: 53 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 17 mm -Brake: 24 V Ffsdpfxob A N E Se Afpeu -Protection class: IP 65 -Weight: 8 kg

Condition: good (used), geared motor, electric motor -Speed: 28.5 rpm -Power: 0.75 kW Fsdpfxsb A Iq Es Afpefu -Design: B5 angle -Shaft diameter: Ø 35 mm -Brake: 24 V -Protection class: IP 65 -Weight: 45 kg

Condition: good (used), geared motor, electric motor -Speed: 92 rpm Ffsdpfx Afjb A Rnlepeu -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 17 mm -Protection class: IP 54 -Weight: 7 kg