Used Push Broom for sale (1,496)

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off Ljdot Hw D Ropfx Acfern for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, For sale is a high-quality panel saw, the Holzkraft Minimax SC 4 Elite, from SCM. The machine is in very good condition and is ideal for carpentry shops, joineries, and demanding interior design work. The robust industrial design impresses with its precise cutting, smooth-gliding sliding table, and proven SCM technology. Technical data: Manufacturer: Holzkraft / SCM Minimax Type: SC 4 Elite Year of manufacture: 2014 Voltage: 400 V / 3 phases Motor power: 5.0 kW Saw blade diameter: 250 – 315 mm Main saw blade bore: 30 mm Scoring saw blade: Ø 120 mm Scoring saw blade bore: 20 mm Scoring saw included Machine weight: approx. 810 kg Equipment: Aluminum sliding table Extension frame with stop Parallel fence Scoring device Push stick Clamping device Lrjdpfx Aezdyngjcfon Operating tools Dust extraction connection Scope of delivery: Holzkraft Minimax SC 4 Elite Extension frame Parallel fence Accessories as shown in the images Transport is possible for an additional charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: used, mileage: 79,986 km, power: 88 kW (119.65 HP), first registration: 02/2021, fuel type: diesel, overall weight: 3,070 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 6, total length: 5,399 mm, total width: 1,956 mm, total height: 1,967 mm, loading space length: 2,099 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Subject to errors and prior sale! Internal number: 0961.6381270 ----EQUIPMENT * Sound & Climate Package 1 DAB+ - Manual front air conditioning - DAB+ MP3 tuner radio with integrated Bluetooth hands-free system, display, USB & AUX port, steering wheel control satellite * Mobile lashing eyes on the side of the cargo area * ABS with Electronic Brake Assist (EBD) and Brake Assist - with automatic activation of the hazard warning lights in emergency braking * Storage compartments in the driver and passenger doors * Driver's side airbag * Automatic door locking after starting * Electrically adjustable and heated exterior mirrors - with wide-angle insert * Outside temperature display * Clear-lens turn signals * On-board computer * Diesel particulate filter * Electronic rev counter * ESP with Hill Start Assist, load sensing, and ASR * Electric front windows with impulse function * 6-speed transmission * Halogen headlights with daytime running lights * Closed glove compartment - cooled in conjunction with air conditioning * Rear door, 180° opening angle, without window * Keycard hands-free - automatic unlocking of doors and/or tailgate upon approach Push-button start * Height-adjustable headrests (3) * Height-adjustable rear headrests (3) * Standard paint finish * Cargo area: Half-height side paneling * Steering wheel adjustable in 2 positions (length, height) * Engine: Automatic start & stop * Pollen filter * Fabric upholstery * Sliding door, right with sliding window + sliding window, left * Power steering * Seats: Passenger double bench seat with storage compartment * Seats: "Comfort" driver's seat, 3-way adjustable - length, height, backrest angle - with reinforced lateral support, lumbar support, and center armrest * Seats: Rear bench seat for 3 people with folding armrests * Partition with window * Lashing points in the cargo area, lower side * Electronic immobilizer * Heat-insulating glass * Central locking with remote control integrated into the key ... and much more ----The vehicle is unfinished! Nationwide delivery available for an additional charge. Lrjdswllwfspfx Acfsn Errors and prior sale excepted. We are happy to accept your vehicle as part payment. Financing/leasing also available without a down payment! Do you have any questions? We'd be happy to advise you!

Condition: new, Year of construction: 2026, TA1000/2010 Stationary Scissor Lift Table – 1000 kg Capacity The TA1000/2010 Stationary Scissor Lift Table is a durable hydraulic lifting platform designed for handling heavy and oversized loads. Combining a 1000 kg load capacity, a large 2000 × 1000 mm platform, and a stable scissor lift mechanism, this model is ideal for warehouses, manufacturing facilities, technical workshops, assembly stations, and order fulfillment areas. Key Advantages of the TA1000/2010 Scissor Lift Table 1000 kg load capacity – suitable for heavy loads, pallets, crates, structures, industrial components, and production materials. Large 2000 × 1000 mm platform – provides ample space for handling oversized items and loads with non-standard dimensions. Lifting range: 300–1060 mm – allows adjustment of the working height to suit operators, machinery, or production lines. 400 V power supply – designed for industrial, manufacturing, and workshop environments. Remote control operation – convenient lifting and lowering of the platform at the push of a button. Scissor lift mechanism – ensures stable and even platform movement under load. Safety limit switches – automatically stop the platform when the maximum lifting height is reached. Safety toe guard beneath the platform – protects the lowering area and enhances workplace safety. Net weight of 250 kg – provides increased stability when handling large and heavy loads. Stationary construction – ideal for fixed workstations, assembly areas, and production processes. Applications The 1000 kg stationary scissor lift table with an extra-large platform is designed for applications where a standard lifting platform is not sufficient. The TA1000/2010 enables safe lifting, positioning, handling, and placement of large loads at the required working height. Warehouses and Logistics Centers Handling large pallets, crates, containers, and shipment-ready loads. Improving efficiency in storage and material handling operations. Manufacturing Facilities Feeding large components to machines, assembly stations, and production lines. Supporting ergonomic material positioning during manufacturing processes. Assembly Workstations Positioning structures, frames, modules, and technical components at an optimal working height. Packing and Order Fulfillment Areas Handling large products, long materials, and shipment assemblies. Improving operator comfort and productivity. Workshops and Service Centers Lifting heavy machine parts, assemblies, tools, and structural components. Assisting maintenance and repair operations. Quality Control Departments Positioning large components at a convenient height for inspection, measurement, testing, or further processing. Loading and Unloading Areas Supporting the transfer of loads between different working levels. Internal Material Handling Providing vertical transportation of large materials within warehouses and production facilities. Technical Specifications Parameter Value Maximum Load Capacity 1000 kg Minimum Height 300 mm Maximum Height 1060 mm Platform Length 2000 mm Lredpfx Acezdzgwsfjn Platform Width 1000 mm Weight 250 kg Power Supply 400 V UDT Inspection Required Yes

Condition: excellent (used), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser laboratory stand dissolver Type: GFD 11 LST Intended use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from thin-bodied to pasty. Machine design: The laboratory stand dissolver essentially consists of the machine frame, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (provided by the customer) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed adjustment via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via the corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is done by switching on the lifting motor. This only runs as long as the push buttons (2-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains at any desired height. Lowering the mixing tool drive To lower the arm, the corresponding buttons (2-hand safety circuit DOWN-DOWN) on the control panel are pressed. Changing the mixing tool The mixing tool shaft is provided with an M8 connection thread. Depending on the requirements, the mixing tool (stirring star provided by the customer) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) provided by the customer Mixing tool: stirring star, provided by the customer Operating panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". This excludes safety-relevant functions such as disconnecting from the mains by the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber. The operating panel consists of an illuminated LCD display and foil-covered tactile push buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be scrolled through using the up and down arrow keys. Type: GFD 11 LST Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) Lrjdpfxozdtflo Acfjn We will be happy to answer any further questions you may have by phone.

Condition: used, Plasma cutting unit HYPERTHERM, Type Max 100 Plasma cutter with machine torch Machine No. 70-2513, Year of manufacture 1990 Power: 100 Amps = 80% duty cycle 89 Amps = 100% duty cycle Cutting capacity: up to 32 mm material thickness Adjustment range: stepless Hose package length: 22 meters Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 63 Amps plug Lredpfxoyah Sae Acfon - Hose package with machine torch (hand torch without switch) - Spare nozzles for the plasma cutting torch - Separate push button switch for starting the plasma cutter Space requirement L x W x H: 850 x 700 x 1100 mm Weight: 225 kg Good condition Ideal for retrofitting to an oxy-fuel cutting machine.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 100 kW (135.96 HP), number of axes: 2, overall weight: 252 kg, table length: 1,600 mm, table width: 1,000 mm, Equipment: CE marking, documentation/manual, This CNC laser machine has a working area of 1600x1000 mm and is intended for use by a big factory for 24/7. In addition, this laser engraver and cutter features a lighting table with a powerful chain that can hold workpieces weighing up to 80 kg. Wattsan 1610 LT will push your production to new heights. The Wattsan 1610 LT has a lowering depth of 160 mm. This model operates on wood, plywood, cardboard, paper, plexiglass, acrylic, plastic, rubber, leather, stone, etc. It also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Wattsan 1610 LT characteristics: Working area: 1600x1000 mm Laser power: 100-130 W Working table lowering depth: 160 mm Positioning precision: 0,03 mm Machine size: 1505 x 2200 x 670 mm + if it is on wheels 315 mm Packing size: 2300 x 1600 x 810 mm Weight: 532 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Lodpfx Ash Ucwcjcfern Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. WRITE OR CALL US! WE WILL SELECT THE MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 32 kg, total width: 490 mm, total length: 575 mm, total height: 880 mm, type of input current: DC, tank capacity: 60 l, warranty duration: 24 months, We offer for sale a Universal Vacuum Cleaner Karcher NT 65/2 Tact2 Condition of the machine – Perfect, brand new unit Year of manufacture – 2024 Vacuum cleaner with TACT² system. Designed for removal of hazardous class M dust. Meets the highest European safety standards. Lrodpfx Acex Aux Refen Technical Specifications - Power supply parameters: 1 / 220–240 / 50–60 Ph / V / Hz - Airflow: 2 x 74 l/s - Vacuum: 254 / 25.4 mbar / kPa - Container capacity: 65 l - Container material: Plastic - Max rated power: 2760 W - Nominal diameter: ID 40 - Power cable length: 10 m - Sound pressure level: 73 dB(A) - Colour: anthracite - Weight without accessories: 24.5 kg - Weight with packaging: 31.332 kg - Dimensions (L x W x H): 575 x 490 x 880 mm Scope of Delivery - Drain hose (oil-resistant) - Automatic shut-off at maximum collected liquid level - Antistatic system - Metal suction tube, 2 x 550 mm - Filter cleaning, Automatic Tact² Filter Cleaning System - Flat pleated filter, cellulose fibre material - Crevice nozzle - Electrically conductive elbow - Universal floor nozzle width: 360 mm - Bumper bar - Push handle - Swivel castor with brake - Safety class: I - Electrically conductive suction hose, 4 m The vacuum cleaner is equipped with an antistatic system with grounding of suction nozzles, tubes, hose, and elbow to discharge electrostatic charges that may occur when vacuuming very fine dust. It can operate with suction hoses of 40 mm and 60 mm diameter. It is ideal for the automotive and construction industries as well as general industrial applications. Two turbines ensure high suction power. Each is equipped with the TACT system, allowing the vacuum to remove up to 1000 kg of fine dust (class A) using a single filter. The flat pleated Eco filter is suitable for collecting very fine class M dust as well as liquids. Its design offers a large filtration surface while maintaining compact overall dimensions. The TACT2 automatic filter cleaning system alternately shakes half of the filter every 7 seconds, effectively preventing reductions in suction power during operation. Included is a drain hose, which facilitates emptying water directly into a floor drain. The vacuum cleaner has a 65-litre plastic container.

Condition: excellent (used), Year of construction: 2012, operating hours: 5,655 h, functionality: fully functional, overall weight: 2,860 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, empty load weight: 2,860 kg, gearing type: hydrostat, number of seats: 1, drive condition: 80 %, chain condition: 80 %, tire condition: 80 %, Equipment: all wheel drive, gripper hydraulics, hydraulics, rubber tracks, An authorized SUBARU dealer in Łaziska Górne has a Vermeer D9x13 Series 2 horizontal directional drilling rig from 2012 for sale, with 5600 operating hours. We specialize in importing and selling Vermeer and Ditch Witch drilling rigs. A special price is offered for self-collection from Denmark. Once the machine is delivered, refurbished, and fully serviced, the price will be a few thousand euros higher. The machine comes directly from Denmark, from its first owner. It is a compact and efficient HDD drilling rig, ideal for directional drilling for fiber optic, water, gas, power, and sewer installations, even in areas with limited space. Technical specifications of the Vermeer D9x13 Series 2: Engine: Kubota V1505T Diesel, turbocharged Engine power: 47 HP / 35 kW Push/pull force: 40 kN / 9000 lbs Maximum torque: 1763 Nm Spindle speed: up to 220 rpm Maximum carriage speed: 42.7 m/min Drilling fluid pump: 34.1 l/min or 56.8 l/min, depending on the version Maximum drilling fluid pressure: 51.7 bar Drilling fluid tank on the machine: 94.6 l Drill rods: Vermeer Firestick, length 1.8 m, diameter 42 mm Machine length: 3.80 m Transport width: 0.90 m Maximum working width: 1.08 m Height: 1.75 m Weight with drill rods: approximately 2860 kg Thanks to the extendable tracks, the machine is very stable during operation and, at the same time, exceptionally narrow during transport and operation in confined spaces. Additionally, a drilling fluid system is available: We also have a small Ditch Witch FT5 drilling fluid system/mixer from 2021 available for this drilling rig, which is a perfect match for this model and provides a practical set for small to medium-sized drilling projects. Ditch Witch FT5 – basic data: Year of manufacture: 2021 Tank capacity: approximately 757 liters / 200 gallons Maximum flow rate to the drilling rig: approximately 68 l/min Engine: Honda GX160, gasoline Engine power: approximately 5.4 HP Dimensions: approximately 185 × 81 × 136 cm Weight: approximately 182 kg It is possible to purchase the drilling rig alone or as a set with the Ditch Witch FT5 drilling fluid system. We specialize in the professional sale of construction, municipal, and specialized machinery. We are also an Authorized Subaru Dealer. Lrjdpfjzfgt Sjx Acfjn We can arrange transport to the desired address throughout Poland. For more information, photos, videos, and technical details, please contact our sales representatives. We invite you to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, STREET VACUUM CLEANER “ CITY ANT AQUA “ Equipment for cleaning urban areas, streets, sidewalks, parks, stadiums, railway stations, airports, parking lots, industrial areas from different waste. Street vacuum cleaner City Ant works on electrical accumulators which provide 9-hour autonomous work. It can be charged in the nighttime from the 220V. Easy-to-push vacuum cleaner can be used by one hand, noiseless. Changing the trash bag takes only 2-3 minutes. No air pollution. It can take all the waste: wood, steel, plastic, paper, carton pieces, textile waste, leaves, cigarette butt, cans and bottles (glass, plastic and metal) etc. City Ant fits different areas: concrete, asphalt, pavement, lawn, sand, etc. Technical specifications: - Electric motor - 48V / 1200W - 48V / 1200W electric drive - enabling forward and reverse travel - Waste collector type - hopper; - Vacuum power 1.2 Kw; - Maximum speed 6 km/h; - Hopper capacity 240l; - Vacuum hose Ø 125 mm; - Vacuum hose length 2,5 m; - Autonomous work time 8 h; - Charging time 10-12 h; - Wheels Ø 320mm; - Doble nebulizers; - Dust filter with an area of 16 m²; - Hill climb up to 25% - Possibility of overcoming curbs by 15 cm. - Sprayer: 2 - external and internal. - Warning lamp Lredpfxjvrilus Acfsn Price- 11500, 00 Euro + aqua function 1000 Euro netto The CITY BEETLE is a professional electric street cleaning trolley designed for the efficient and effortless collection and sorting of litter gathered from pedestrian streets, pavements, alleys, parks and the surrounding areas of various sites. It ensures many hours of uninterrupted work without physical strain, even during long shifts. Features • The trolley holds up to 20 litres of liquid and is equipped with special mounts for securing cleaning equipment. • It easily passes through turnstiles at bus and train stations. • The battery can be charged anywhere using a standard 230 V socket. • Special mounts allow tools to be easily attached to the trolley. Key benefits of the CITY BEETLE street cleaning trolley: Mobility: speed of up to 6 km/h for quick cleaning of large areas Environmental friendliness: safe for people and the environment Versatility: collects and sorts waste, washes away dirt with water Cost-effectiveness: low energy consumption and minimal maintenance Safe operation: electromagnetic brakes, optimal tyre pressure, IP54 protection Technical specifications: • Dimensions: 2300 × 1500 × 1200 mm • Weight: 410 kg (empty) • Main waste container: 1 × 240 l • Additional waste containers: 2 × 120 l • Water tanks: 2 × 10 l • Spray angle adjustment: Available • Motor power: 1.2 kW • Battery runtime: Up to 8 hours without recharging • Charging time: 10–12 hours • Wet cleaning function • Noise level: 65 dB • Wheel size: Ø320/Ø400 mm, with electromagnetic brakes for safe operation • Tilt angle: up to 10° • Protection class: IP54 (dust- and water-resistant) • Pump capacity: 3.6 l/min • Maximum pressure: 0.6 MPa

Condition: used, maximum load weight: 34,725 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-Axle HardoX Steel Tipper 50 cbm "X-Shape" First registration 10/2024 Mileage 47,509 km Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Unladen weight only 7,275 kg Z-chassis, cranked version Continuous 5 mm HardoX steel HB450 floor Front wall and side walls 4/3 mm HardoX steel HB450 Angled front wall, internal access 2-wing portal doors with pneumatic post-release 1 grain hatch in the right door leaf Reinforced rollover tarp, central locking HYVA tipping cylinder type Alpha, suitable for high and low pressure Full-load ALU landing legs Lsdpfoyy Haksx Acfern 2x air vibrators below body SAF axles with large disc brakes, 430 mm 1st axle: lift axle with starting aid WABCO trailer EBS with rollover stability support (RSS) WABCO Smartboard Automatic tipping lowering Lifting and lowering mechanism Tires: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminum folding ladder Holder for shovel and broom Toolbox on the right 4x LED reversing lights RENTING is the new BUYING – also available for immediate delivery as FULL-SERVICE RENTAL.

Condition: used, maximum load weight: 33,707 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 09/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2025, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "EXTREME" Rock Tipper First registration: 09/2025, Condition: NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered width design) Unladen weight: 8,293 kg Z-chassis, cranked design Continuous floor in 6 mm Hardox steel HB450 4 crusher bars evenly distributed along the entire length of the floor, fully welded Front wall and side walls made of 5 mm Hardox steel HB450 Slanted front wall, with internal access Deflector plates along the entire length of the side walls (to protect the mudguards) Hydraulic rear tailgate (with swinging function) HYVA tipping cylinder, type Alpha, suitable for high and low pressure Aluminium landing legs, full-load rated 2x pneumatic vibrators underneath the body Lsdpfxoxriu Ej Acfern SAF axles with large disc brakes, 430 mm 1st axle is a lift axle with start-assist WABCO Trailer EBS with roll stability support (RSS) WABCO Smartboard Automatic tipping lowering device Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holder Toolbox on the right side 4x LED reversing lights RENTING is the new BUYING: also available for immediate full-service rental-----

Condition: used, maximum load weight: 34,130 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 10,149 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,822 mm, Year of construction: 2024, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 55 cbm "X-Shape" First registration: 10/2024, condition: like NEW Mileage: 62,270 km Dimensions inside (LxWxH): 10,149 x 2,350 / 2,450 x 2,285 mm (conical design in width) Unladen weight: only 7,820 kg Z-chassis, cranked version Floor made entirely of 5 mm Hardox steel HB450 Front wall and side walls: 4 / 3 mm Hardox steel HB450 Sloped front wall, interior access ladder 2-wing rear portal doors with pneumatic remote unlocking GRAIN SLIDE with dust protection bag Reinforced roll-over tarpaulin HYVA tipping cylinder, type Alpha, suitable for high and low pressure Crank landing legs, rated for full load 2x pneumatic vibrators under the body SAF axles with large 430 mm disc brakes 1st axle is a LIFT AXLE with starting aid WABCO trailer EBS with RSS roll stability control WABCO Smartboard Automatic tipping lowering system Ledpfx Aceyl Tfvjforn Hydraulic lift and lowering device Tyres: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium wheels Aluminium access ladder Shovel and broom holder Right-hand toolbox 4x LED reverse lights RENTING is the new BUYING – also available from us as a FULL-SERVICE RENTAL, immediately available-----

Condition: used, maximum load weight: 34,900 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2021, next inspection (TÜV): 10/2026, loading space length: 10,000 mm, loading space width: 2,400 mm, loading space height: 2,280 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,861 mm, Year of construction: 2021, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 55 cbm "AGRAR-LINER" First registration 04/2021 Mileage 203,910 km Internal dimensions (LxWxH): 10,000 x 2,350 / 2,450 x 2,280 mm (conical body design) Unladen weight only 7,100 kg Z-chassis, cranked design Floor made completely of 3 mm Hardox steel HB450 Lrsdpjy Nvrzjfx Acfsn Front wall and side walls 3 mm Hardox steel HB450 Inclined front wall, interior access Single-leaf aluminum combination door with swinging function, pneumatic rear unlocking 1 grain discharge slide Reinforced roof roll tarp HYVA tipping cylinder, Alpha type, suitable for both high and low pressure Full-load aluminum landing legs 2x pneumatic vibrators below the body SAF axles with large disc brakes, 430 mm First axle is a lift axle WABCO trailer EBS with roll stability support (RSS) WABCO Smartboard Raise and lower device Tyres: 385/65 R 22.5 Aluminum access ladder Shovel and broom holder Toolbox on right side 4x LED reversing lights RENTING is the new BUYING – immediate availability also on full-service rental with us-----

Condition: used, New electric scrubber-dryer, floor cleaning machine, DAEWOO, type DAFL50A Year of manufacture 2025 – unused, from stock Theoretical area performance: 2000 m²/h Working width: 510 mm Cleaning brush: Ø 510 mm Lrsdpozcxmgjfx Acfen Brush speed: 175 rpm Suction nozzle width: 850 mm Tank volume, clean water: 50 liters Tank volume, dirty water: 50 liters Noise level: 66 dBA Climbing ability: 2% Battery voltage: 24 volts, 100 Ah - Battery charger, 24 volts - Battery, 24 volts, 100 Ah - One cleaning brush - Two separate tanks - No drive system; the machine is pushed manually, or the machine moves itself via the brush drive Machine length: 1200 mm Machine width: 510 mm Suction nozzle width: 850 mm Machine height: 1350 mm Unladen weight: 160 kg New – original packaging – unused, from stock

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Total price demonstration machine from stock 73447 Oberkochen: on request! Lrodpfxovu Hd To Acfen ----- More options like longer/shorter inlet/outlet, Stop systems on re...

Condition: excellent (used), Sibo Taus 2 1/2 Stylus Profiling Machine Working diameter 18-63mm Main engine with 5.5kw power Lsdov Tv Urepfx Acforn Minimum length of the processed element 470mm Feed speed regulated by means of a variator Possibility of producing elements such as: billiard cues, broom handles, shovels, rakes or chair legs

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902037031, empty load weight: 4,795 kg, maximum load weight: 30,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2025, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,040 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, color: grey, These images are archive images! The vehicle may still be in use! Fine-grain steel welded construction, in basic lightweight design, kingpin plate with replaceable 2" kingpin, Curved front end "Patented" 24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Support wedges with holder Underrun protection, foldable Half-shell fenders Integrated "fender holder," surface resistant to stone chipping with anti-splash flaps only on the last axle Tarpaulin rod with holder Towing hook at the rear (not on Revolution model) Axles + Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assistance, activated by "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism" Braking system 2-line compressed air braking system Ljdpfjy Rrplox Acfern Color-coded line routing for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Automatic tilting lowering with shut-off valve "TPMS" tire pressure monitoring system - display on the tractor unit, via EBS, without truck installation (the truck must have the necessary prerequisites. Only on base tires). Wheels and tires 385/65 R22.5" Steel rims Electrical system 24 volts, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED (Note! with certain tractor units, false diagnoses may occur, although the function is given) Yellow LED lighting on the sides linked to the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, without connecting cable Additional LED work light, integrated and recessed at the rear, switched via reversing light Hydraulics Low-pressure cylinder max. 170 bar Operation hydraulically via truck auxiliary drive Bins Aluminum box body made of high-quality, abrasion-resistant material. Sloping front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, cleanly welded, with top rail profile that prevents spillage. Inside with access ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder outside on the front wall. Greenline - conical and aerodynamic bin shape "Membrane" - rear wall Rear wall as a hinged flap with "double-hinge hinge," externally mounted with double hook lock. Rear wall with rubber seal Floor continuous, 6 mm thick Standing platform with access ladder, connecting plate for air/electrical and brake connections with large clearance for optimal operability. Roll tarp, can be folded to the right side, with central locking on the left side Operating instructions For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod, so that it is not attacked and rusted by the material.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031190, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2023, next inspection (TÜV): 03/2027, loading space length: 9,300 mm, loading space width: 9,300 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: grey, The images are archive images. The vehicle may still be in use! Unbeatable unladen weight! Chassis, semi-trailer, tipper Fine-grain steel welded construction, lightweight design, kingpin plate with interchangeable 2" kingpin Curved front panel "Patented" 24-ton, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2x chock blocks with holder Aluminum side underrun protection Underrun protection, foldable 6x half-shell fenders Integrated "fender holder," surface is dirt-repellent 2x with anti-splash flaps, only on the last axle 2x tow hooks at the rear Axles + Suspension SAF disc brake axles Axles in off-road design "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Air suspension 1st axle, automatic lift axle, including forced lowering and starting aid, activated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism," 10-year warranty against rust-through Braking System 2-line compressed air braking system Color-coded line routing for easy servicing. Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Wheels and tires 6x 385/65 R22.5", manufacturer at the discretion of the manufacturer 6x steel rims, manufacturer at the discretion of the manufacturer Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection) Operation hydraulically via truck auxiliary drive Tippers Aluminum box tipper made of high-quality, abrasion-resistant material. Sloping front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow profile, cleanly welded, with top profile that prevents material from spilling. Interior with climbing aid on the front wall (not in connection with Cramaro). Shovel and broom holder on the outside of the front wall. Greenline - tapered and aerodynamic tipper body shape "Membrane" - rear wall Rear wall as a swing-open flap with "double-joint hinge," externally supported with double hook lock. Rear wall with rubber seal Floor continuously 5 mm thick, Brinell 110 Note! Only for the transport of sand, gravel, and rolled gravel with a maximum grain size of up to 20 mm! All other goods are excluded from the warranty! Rolltarp, single-sided, for storing on the right-hand side, with central locking on the left-hand side Unbeatable unladen weight! Lrjdjy Rlvrspfx Acfsn The images are archive images. The vehicle may still be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031191, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2024, loading space length: 9,300 mm, loading space width: 2,420 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/65 R22,5", color: grey, The images shown are archive photos. The vehicle may still be in use! Chassis: Semi-trailer tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2'' kingpin Patented curved front panel 24-ton 2-speed landing gear, single-side operation, with straight base, with lateral compensation 2x wheel chocks with holders Side underrun protection: aluminium Rear underrun protection, foldable 6x half-shell mudguards Integrated "mudguard holder" with stone-repellent surface 2x with anti-spray flaps (only on the last axle) Axles & Suspension 3x SAF disc brake axles Axles in off-road specification "Axles/chassis laser aligned" – reduces tire wear and fuel consumption Air suspension Lsdoy Rl Unspfx Acfsrn 1st axle with automatic lift axle, including forced lowering and traction aid, activated by "braking 3x". (Traction aid functional up to 30% axle overload and up to a max speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" – 10-year warranty against corrosion Braking System 2-line compressed air braking system Coloured line routing for easy servicing Spring-actuated parking brake 2 fail-safe coupling heads at the front, without connecting line EBS by Haldex, electronic braking system with EBS socket at the front (without connection cable) Note: The trailer may only be towed by towing vehicles that ensure proper ABS function! With raise & lower valve Vehicle stability system Wheels and Tires 6x 385/65 R22.5", manufacturer’s choice 6x steel rims, manufacturer’s choice Electrics 24 volt, multi-chamber lights, side-mounted yellow LED lighting 2 white front position lights 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed part, nominal width 48 mm. (without hose connection) Actuation hydraulically via truck PTO Body / Tip Body Aluminium box body, high-quality abrasion-resistant material Sloped front wall, 5 mm thick, with external cylinder mount Side walls made of 30-mm hollow-chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Internal access on front wall (not in combination with Cramaro). Shovel and broom holder on outside of front wall Greenline – conical, aerodynamic box shape "Membrane" tailgate Tailgate: pendulum door with double-joint hinge, externally mounted, double hook lock Tailgate with rubber seal Note: Heat-resistant up to 170°C max! Floor: continuous 5 mm, Brinell 110 Note: Only suitable for transporting sand, chippings and gravel, max grain up to 20 mm! All other goods excluded from warranty! Operating Notes For transport of salt, lime, etc., we recommend a tipping cylinder with hard chrome-plated piston rod to avoid corrosion and pitting. The stated gross weight is technically feasible; depending on load, the actual gross weight may not be achievable within the legal axle, support, and fifth-wheel loads. (Improper load distribution may impair driving and tracking behavior) Paint Finish Frame: DB 7350 Novagrey "10-year warranty against corrosion" Landing gear: black coated Body: natural aluminium Roller tarp: RAL 7035 light grey

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 3ROLL 4000 X 6 MM, roller (bottom) diameter: 300 mm, roller diameter: 310 mm, roller length: 4,050 mm, working width: 4,000 mm, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 11,000 kg, total length: 5,700 mm, total width: 1,500 mm, total height: 1,700 mm, type of input current: three-phase, working length: 4,000 mm, Equipment: documentation/manual, emergency stop, 3 ROLL PLATE BENDING MACHINE WITH PREPINCHING capacity plate roll 4000 x 6 mm Plate width 4000 mm Thickness plate rolling 6 mm Pyramid 3 rolls with pre-pinch cylindrical plate rolling Conical plate rolling Rollers surface length 4050 mm Top roll 310 mm Side rolls 300 mm Datasheet power rollers rotation 15 Hp -3 rolls driven rotation with gear unit power bending- prebend side lower rollers 7,5+7,5 Hp Cene bending attachment rollers tiltable for plate conical forming - hardened contrast pad roller type Hydraulic open front drop-end , top-roll tilt-up wide opening for unloading Console electric on wheels, electric push buttons commands remote Digital readouts rollers position repetability safety and emergency installiton machine in working condition Lsdpfx Aovn I Hcscfern dimension 5700 x1500 x H1700 mm weight 11 Ton

Condition: good (used), functionality: fully functional, degree of automation: manual, actuation type: electric, number of rollers: 3, shaft diameter: 130 mm, roller diameter: 380 mm, rotational speed (min.): 5 rpm, overall weight: 4,500 kg, power: 15 kW (20.39 HP), input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, emergency stop, PROFILE BENDING ROLL 130- MODEL PARMIGIANI ITALY ELECTRO MECHANICAL MACHINE SHAFTS OUTPUT DIA..130 MM 3 ROLLERS PYRAMID UPPER ROLL DRIVEN ROTATION WITH GEARUNIT ONELECTRIC MOTOR Kw 11 Lodoxackcspfx Acfjrn SIDE ROLLERS BENDING POWERED ON ELECTRIC MOTOR Kw 3 UPPER ROLL DIA 380 mm SIDE ROLLERS DIA 350 mm CONTROL PANEL UPGRADED LATEST TECHNOLOGY ELECTRIC INVERTERS FULL POWER CONTROL WITH INFINITE VARIABLE SPEED COMMANDS ELECTRIC ON PORTABLE PUSH BUTTONS DIGITAL POSITION READOUT OF THE BENDING ROLLERS WEIGHT OF THE MACHINE 4,5 TON SAFETY AND EMERGENCY SYSTEM INSTALLED MACHINE WORK WITH VERTICAL SHAFTS

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Capacity: plate width 2000 mm thickness rolling 6 mm pre-bending 4 mm minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Conical plate rolling attachment Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells speed slow/fast variable safety installation with emergency stop. Instruction manuals for operation and service. Lsdpfx Aew Hpzwocfsrn Layout mm 3800x1200xH1100 mm Weight 2800 Kgs

Condition: good (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: manual, actuation type: hydraulic, pipe diameter (max.): 60,90,115 mm, tube wall thickness (max.): 3 mm, number of axes: 3, working height: 700 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 200 bar, pressure (max.): 200 bar, number of digital displays: 3, Equipment: CE marking, documentation/manual, emergency stop, quick-change device, Limpet coil roller hydraulic to form half round pipe from flat stainless steel strip and bending into wanted radius with spiral continuous. -Shafts output 80 mm -Interchangeable set of rollers on the shafts for the different size of pipe 60 mm , 90 mm , 115 mm Ljdpoyik Hcjfx Acforn -Coil holder for the reel metal strip with guide-way bench uncoiling and alignment the steel strip to the rolling machine -Pinching lower central roll adjustable to form the half pipe -Digital position readout to determine the bending diameter of the coil, the pitch of the coil, the half tube shape forming -hydraulic arm movable in 3 directions to set the pitch of the coil roll -Upper vertical support hydraulic operated to hold in position the formed diameter and collect the coils from diameter 700 to diameter 3000 mm -Operator console electric with push buttons and digital position readouts for the coil length, the bending radius and the forming load. -Service manuals and operation books along with the machine

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm Lrjdpfxjy Aubue Acfjn --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop