Used Quill for sale (1,258)

Condition: good (used), Year of construction: 1980, machine/vehicle number: 2226-3, Offer 26331 Technical data: - Drilling capacity in full steel ST 60: 23 mm - Drilling capacity in GG 25: 30 mm - Thread cutting in ST 60: M 20 - Thread cutting in GG 25: M 26 - Drill spindle connection: MK 3 - Quill stroke: 135 mm - 12 drill spindle speeds: 70 - 1550 rpm - Drilling feed: 0.075 - 0.30 mm - Min./max. distance spindle – table: 220 / 670 mm - Drilling radius min./max.: 305 / 920 mm - Table size: 1060 x 600 mm - Drive: 400 V / 1.1 - 1.6 kW - Space requirement approx.: W 1200 x H 2500 x D 2300 mm - Weight approx.: 1380 kg - Includes: - Thread cutting device - Hydraulic column and boom clamping - T-slot clamping plate, vertical, on the left side of the machine Prsdpfxe Agtage Airoc

Condition: like new (used), Year of construction: 1983, operating hours: 5,500 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,450 mm, travel distance Z-axis: 1,250 mm, table load: 12,000 kg, spindle diameter: 125 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 3,000 rpm, total height: 4,000 mm, total length: 9,000 mm, total width: 6,000 mm, table length: 1,450 mm, table width: 1,250 mm, spindle mount: MK 5, type of input current: AC, workpiece weight (max.): 12,000 kg, drill spindle length: 600 mm, spindle stroke: 600 mm, mount diameter: 50 mm, control cabinet width: 600 mm, control cabinet length: 4,000 mm, control cabinet height: 2,000 mm, overall weight: 24,350 kg, year of last overhaul: 2017, Equipment: crane, rotational speed infinitely variable, Coolant system with 4 nozzles and center spindle Protective door at the operator station * The machine does not require a foundation but is installed on a specially designed polymer bed, standing 600 mm high. * Additional feature: A CNC-controlled rotary table is integrated into the boring quill, allowing for the machining of contours up to a diameter of 600 mm. The machine was electrically and mechanically overhauled by Scharmann, most recently in 2015. Prede Agd Ahepfx Airec During the overhaul, the entire electrical system was replaced, and the control system was upgraded to Siemens 840 D. In the mechanical area, for example, the roller bearing shoes and the ball screw in the Z-axis were replaced, as well as the spindle head, including its guide and flyer chains for the counterweights, which were inspected and/or renewed. In addition, HCR installed a machine enclosure (open at the top), which was integrated into the safety concept, including operating mode 4, by Scharmann. In 2017, the CNC rotary table, the differential gear, and the boring spindle unit were dismantled and overhauled at the Scharmann factory (new bearings, seals, and gears).

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: VM0429, turning diameter over cross slide: 196 mm, spindle bore: 42 mm, turning diameter over bed slide: 350 mm, center height: 170 mm, turning length: 650 mm, quill stroke: 140 mm, total length: 1,900 mm, total width: 1,100 mm, total height: 1,300 mm, spindle speed (max.): 3,250 rpm, spindle speed (min.): 20 rpm, metric thread steps: 51, type of input current: three-phase, overall weight: 1,350 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Lead and feed screw lathe with digital display Colchester Master VS 3250 Digital display, 3 axes, Heidenhain Center height: 170 mm Distance between centers: 650 mm Swinging diameter over bed: 350 mm Swinging diameter over cross slide: 196 mm Spindle speed, stepless, from 20-3250 RPM (3 gear stages) Year of manufacture: 1996 Spindle bore: 42 mm Spindle mounting D1 4“ Camlock Tailstock taper MK 4 Tailstock quill travel: 140 mm Coolant pump Central lubrication of guideways Electromagnetic spindle brake Halogen lamp Longitudinal feeds from 0.036 to 1.2 mm/revolution Cross feed: half of the longitudinal values 51 metric thread pitches from 0.2 to 14 mm 56 Whitworth thread pitches from 2 to 56 threads/inch 20 module thread pitches from 0.2 to 3.5 module 20 diametral pitch thread pitches from 8 to 56 D.P. Operating manual and spare parts list, English Weight: 1350 kg L x W x H: 1900 x 1100 x 1300 mm Motor: 7.5 KW Including accessories: 3-jaw chuck, brand Pratt Burnerd Pedpozp Nknofx Airerc 4-jaw chuck, Ø 200, brand Bison Quick-change collet chuck with lever 15 pcs. collets, Ø 1/1.5/2/3/4/5/6/7/8/9/10/12/13/14/15 mm 16 sets of soft jaws for 4-jaw chuck Quick-change tool holder Multifix with 5 tool holders incl. facing tool, cutoff tool, and internal turning tool 1 pcs. center punch 1 pcs. drill chuck, Ø 1 to 13 mm

Condition: ready for operation (used), Year of construction: 2023, operating hours: 23 h, travel distance X-axis: 410 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3-axis KUNZMANN WF 410 MC universal machining centre was manufactured in 2023. It features an electronically controlled infinitely variable main drive with a spindle speed of up to 5,000 rpm and a robust spindle power of 13.0 kW. The machine is equipped with hardened and ground flat guideways and automatic mechanical tool clamping. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF 410 MC machine we have for sale. Contact us for further details. Prodo Af Rqbspfx Airec - Demonstation Machine -Machine ON Time: 910 h - Spindle Power S1-100% ED: 6.8 kW - Spindle Power S6-25% ED: 13.0 kW - Spindle Speed (Manual Operation): Infinitely variable 1 - max. 4,500 rpm - Spindle Speed (Automatic Operation): Infinitely variable 1 - max. 5,000 rpm - Feed Drives: Electronically controlled infinitely variable servo drive per axis - Rapid Traverse / Feed Rate X-, Y-, Z-axis: Infinitely variable up to max. 5 / 5 / 5 m/min - Operating Voltage: 400 V - Mains Frequency: 50 Hz - Number of Phases: 3- Rated Current: 24 A - Main Fuse: 32 A - Short-Circuit Breaking Capacity: 10 kA - Power Consumption / Connection Power: approx. 17 kVA - Control Voltage: 24 V - Installation Weight (Base Machine): approx. 1,800 kg (incl. fluids, without options/tools) - Max. Transport Weight: 2,030 kg - Machine Construction: FEM-optimized cast construction in cross-slide design - Guideways: Hardened and ground flat guideways in X, Y, Z with metal covers - Drive System: Ball screws in all axes - Spindle Taper Interface: SK 40 DIN ISO 7388-1 Form AD with pull stud DIN ISO 7388-3 Form AD (SKU: 10-113300) - Vertical Milling Head: Swivel range +/- 90°, manually extendable quill with turnstile, 70 mm stroke, clampable, speed-dependent air cooling, milling cutter guard- Tool Clamping: Automatic mechanical tool clamping, clamping force 10,000 N, hydraulic release - Measuring System: Distance-coded linear measuring systems, direct, incremental, resolution 0.001 mm - Overload Protection: Overload detection via drive and control technology - Safety Handwheels: In all 3 axes - Safety Enclosure: Splash and chip guard cabin mounted on chip tray, moving vertically with axis, limit switch secured, 2 sliding doors front, 1 hinged door right, viewing windows all sides - Control Panel: Mounted on long, swiveling arm at base, rotatable - Lubrication: Automatic central lubrication with initial lubricant filling and front-mounted separate waste oil container - Coolant System: Free-standing reservoir, 66 L capacity (SKU: 10-450111-03) - Machine Lamp: LED flexible arm light - Leveling Elements: 1 set = 4 pieces - Fixed Angular Table: Clamping surface 650 x 375 mm, 5 T-slots 14 H7 (pitch 63 mm), max. load capacity 250 kg (SKU: 10-470050-02) - Control Unit: HEIDENHAIN TNC 620 FS with Functional Safety - Screen: 19" vertical touchscreen - Storage Capacity: 30 GB total, 7.7 GB program memory (Compact Flash CFR)- Block Processing Time: 1.

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP3 from a vocational school! Technical data: >> Machine No. 1847 >> Swivel-tilting table >> Speed: 40 - 2000 rpm Pjdpe Agn Injfx Airsrc >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel distances X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical and horizontal quill - SK-40 >> Collet system S20x2 >> Weight approx. 1300 kg Accessories and equipment: >> Central lubrication About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles can be moved easily. Most of the bellows are new. An oil change has been carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel machine on-site while it is powered up. For an additional cost, the machine can be equipped with a new digital display from K&C.

Condition: used, Year of construction: 1988, No minimum price – guaranteed sale to the highest bidder! Pjdpfxoz S Iz Ns Airsrc TECHNICAL DETAILS Travel distances X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm Quill travel: 80 mm Work table Table size: 1,000 × 400 mm Spindle Spindle speed: 20–3,000 rpm Spindle mount: SK 40 Feed rate and rapid traverse Automatically programmable feed rate: 1–4,000 mm/min Rapid traverse: 6 m/min Control system CNC control: Philips 432 Performance data Drive power: 12 kW Total power consumption: 15 kW EQUIPMENT Rotatable V-head Coolant pump Hydraulic tool clamping Automatic central lubrication Machine light Chip collection tray Splash guard enclosure

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 from a training center Technical data: >> Machine no. 6884 >> Swiveling rotary table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travels X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Collet system S20x2 >> Weight approx. 1100 kg Accessories and equipment: Prodpfx As Agn Rxoirjc >> Coolant system >> Brake motor About the machine: A Deckel FP2 universal milling machine in good condition is offered. All spindles can be moved easily. All bellows are new. An oil change has been performed. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel machine on-site while it is powered up. The machine is available immediately. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Emcomat 17D, lead screw and pull spindle lathe, manufactured in 2013, from a vocational training workshop, CE compliant, in excellent condition!!! Technical data: Podps Afxm Ujfx Airorc >> Year of manufacture: 2013, Machine no. D4D 130601 >> Center height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed stages from 40-3000 RPM, infinitely variable >> Quill stroke: 120 mm >> Tailstock: MK3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Footprint / Dimensions approx.: Length 1,600 x Depth 0.9 x Height 1.3 meters >> Weight approx.: 750 kg Accessories and equipment: >> 3-axis position indicator >> 1 three-jaw chuck with 200 mm diameter and 1 set of jaws from Röhm >> 1 four-jaw chuck with 200 mm diameter and 1 set of jaws from Röhm >> 1 quick-change tool holder without collets >> Steel tool rest with 2 pockets >> Chip guard >> Coolant system >> Bed stop About the machine: Offered for sale is an Emcomat 17D, lead screw and pull spindle lathe, manufactured in 2013, in well-maintained condition. The machine is fully functional, of course. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to inspect this machine on-site while it is powered on and to convince yourself of its condition.

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, feed length X-axis: 4,000 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,500 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, torque: 1,890 Nm, controller manufacturer: heidenhain, controller model: TNC 530, table load: 10,000 kg, spindle speed (max.): 3,000 rpm, spindle motor power: 33,000 W, spindle nose: ISO 50, number of spindles: 1, number of slots in tool magazine: 136, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, X-axis: transverse movement of the table, 4000 mm Y-axis: vertical movement of the head, 2500 mm Z-axis: longitudinal movement of the column, 1500 mm W-axis: longitudinal movement of the quill, 600 mm Feed rates for X/Y/Z/W axes: 5/5/5/5 m/min Rapid traverse rates for X/Y/Z/W axes: 20/20/20/15 m/min Total number of tables: 3 – No. 1 pallet 1300 x 1600 mm (used for head changes) + No. 2 pallets 1300 x 1600 mm with 2 extensions 400 x 1300 mm Rotary table with rotation speed of 0 - 120 degrees/min INCLUDED ACCESSORIES: 2-spindle indexing head Quick-change system with BERG clamping jaws for mounting accessory heads Coolant passage through the spindle Chip evacuator for X=4000 mm travel RENISHAW RMP60 probe Robot tool changer with 136 positions AUTOMATIC pallet changer (1 pallet for accessory changes + 2 pallets for part machining) HEIDENHAIN TT140 tool probe CE marking Prodps Aa Awaefx Airoc

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0166, spindle bore: 105 mm, quill stroke: 300 mm, spindle speed (min.): 26 rpm, spindle speed (max.): 2,000 rpm, total length: 4,700 mm, total width: 2,260 mm, total height: 2,260 mm, type of input current: AC, overall weight: 4,800 kg, distance between centers: 2,000 mm, number of tool stations in tool turret 3: 8, Cycle-controlled turning machine with Fagor 8055i control Model: UT 660x2000 Turning diameter over bed 660 mm Turning diameter over carriage 460 mm Turning diameter in the bed bridge 960 mm Distance between centers 2000 mm Maximum turning length 1650 mm Headstock Spindle bore 105 mm Spindle head Camlock D1-11 DIN 55029 Spindle taper MK8 with reducing sleeve MK6 Spindle speeds Psdpo Agcnnofx Airjrc (3 ranges, stepless) Low 26 – 224 rpm Medium 225 – 670 rpm High 671 – 2000 rpm Drive nN = 1500 rpm / NN = 96 Nm / IN = 34 A (50 Hz) Tailstock Quill stroke 300 mm Quill diameter 105 mm Taper quill MK6 Saddle Longitudinal travel (Z-axis) 1700 mm Z – Rapid traverse 6 m/min Z – Feed rate 1 – 3000 mm/min Z – Drive nN = 3000 rpm / NN = 14.5 Nm / IN = 8.5 A (50 Hz) X – Rapid traverse 6 m/min X – Feed rate 0.5 – 3000 mm/min X – Drive nN = 3000 rpm / NN = 6.0 Nm / IN = 4 A (50 Hz) Turret (8 tool stations) Tool holder VDI (8x) Coolant pump Coolant pump tank volume = 115 l Lubrication unit Pump (lubrication for Z+X saddles) Tank volume = 2 l Machine bed Machine bed width 480 mm Max. turning length 1650 mm Power 39.3 A Power 24 kW Mechanical data Overall length 4700 mm Overall width 2250 mm Overall height 2260 mm Net weight 4800 kg Gross weight 5500 kg All of the above technical data are for reference only. Control type CNC Condition Used Year of manufacture 2013 Machine is powered Yes Weight 4800 kg Width 4.7 m Height 2.26 m Depth 2.25 m This offer is exclusively aimed at entrepreneurs within the meaning of § 14 BGB. No returns on used goods! No warranty.

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9611-1806, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period of November 16th to November 26th. TECHNICAL DETAILS General Information Machine number: 9611-1806 Control system: Siemens SINUMERIK Electrical Data Pjdpsz Uql Ajfx Airsrc Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Working Area Maximum turning height: 1,240 mm Maximum turning length: 2,000 mm Spindle bore: 130 mm Chuck diameter: max. 130 mm Torque: max. 460 Nm Cross slide travel: 200 mm Tool Holder Tool holder: VDI 40 Tailstock Taper: MK 5 Tailstock diameter: 90 mm Automatic tailstock quill travel: max. 150 mm Transport Transport: possible on a standard truck EQUIPMENT Workshop cabinet Large quantity of VDI 40 tool holders Coolant system Loading system

Condition: ready for operation (used), Year of construction: 1960, Available immediately ex works: Table drilling machine, Scharmann Type FB 125 b Year of manufacture 1960 Complete retrofit in 2020 Spindle 125 mm Metric 80 / SK 50 mounting Quill stroke 800 mm Table 1600 x 1200 mm Table traverse 2000 mm Installation height, spindle / table 1400 mm Prodpfx Aio Aa Im Tersc Table longitudinal travel 2500 mm Spindle speeds 5 – 740 rpm, 7.5 – 1100 rpm With Wohlhaupter machining: 5 – 74 rpm 3-axis Heidenhain digital display Vertical head Large Wohlhaupter turning head Various other accessories Weight 21 tons Price: Euro 7,500.00 + VAT, ex works

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 610 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC7, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3-axis KUNZMANN WF 610 CNC was manufactured in 2024. It features a longitudinal travel of 610 mm, transverse travel of 400 mm, and vertical travel of 450 mm. The machine is equipped with a 20-station tool changer and a maximum table load of 300 kg. If you are looking to get high-quality milling capabilities, consider the KUNZMANN WF 610 CNC vertical machining centre we have for sale. Contact us for further details. Pedpfe Af Nzujx Airjrc - Demonstration machine- Spindle Hours: 332 h- Program Run Hours: 310 h- Feed Rate (Rapid Traverse): X/Y/Z up to max. 30/30/15 m/min - Main Drive (Option Installed): SK 40 Motor Spindle, 1 - 12,000 rpm (Swiss made) - Spindle Power: 8.5 kW (S1-100% ED) / 11.5 kW (S6-40% ED) - Spindle Torque: 43 Nm (S1-100% ED at 1,880 rpm) / 58 Nm (S6-40% ED at 1,880 rpm) - Tool Interface: SK 40 DIN ISO 7388-1 Form AD (formerly DIN 69871 AD) with pull stud DIN ISO 7388-3 Form AD (formerly DIN 69872) - Tool Clamping: Mechanical, clamping force 10,000 N, hydraulic release - Vertical Milling Head: Direct-driven, manually tiltable -5/+90°, extendable quill with turnstile (stroke 70 mm, clampable) - Rigid Angle Table Surface: 800 x 425 mm - Table T-Slots: 6 x 14 H7 (pitch 63 mm) - Max. Table Load: 300 kg - Tool Changer: 20-station disc magazine, SK 40 - Max. Tool Diameter: 75 mm (full magazine) / 150 mm (with adjacent empty pots) - Max. Tool Length: 250 mm - Max. Tool Weight: 8 kg - Tool Change Time: approx. 3 s (chip-to-chip approx. 15 s) - Positioning Accuracy (ISO 230-2): 0.008 mm (direct linear measuring systems) - Repeatability (ISO 230-2): 0.006 mm (direct linear measuring systems) - Measuring System: HEIDENHAIN absolute direct linear measuring system (resolution 0.001 mm) - Coolant Through Spindle (IKZ): 50 bar high-pressure pump (26 l/min), 4-stage pressure adjustment (15/25/40/50 bar), 25 µm double switch filter - Internal Air Cooling: Through-spindle air cooling, M-function programmable - External Air Cooling: Flexible articulated hose, M-function programmable - Paper Band Filter Unit: Trommel-mulden filter with 600 l external tank, type VDF150/50/50 (150 g/m²) filter fleece (dimensions: 1800 x 860 x 1620 mm) - Chip Conveyor: Hinge-belt conveyor integrated into 115 l coolant tank, 60° incline, lateral discharge left (height 870 / 1060 / 1200 mm) - Workpiece Probe: HEIDENHAIN TS 460 3D probe (infrared) with SE 661 transceiver - Additional Axes Preparation: 4th axis preparation (axis controller in electrical cabinet, pre-wired interface) - Automation Interface: Preparation kit for EDUCATION4.0 Cobot cell (Harting connector I/O interface, pneumatic connection, plus 2x pneumatic table connections max. 6 bar) - Enclosure Door: Automatic sliding front door driven by belt drive (manual push button & programmable) - Software Option: OCM (Optimized Contour Milling) for advanced trochoidal milling - Handwheel: HEIDENHAIN HR 510 FS electronic handwheel with axis selection and emergency stop - Operating Voltage: 400 V, 50 Hz - Power Consumption: approx. 21 kVA - Control Voltage: 24 V - Compressed Air Supply: 6.5 - 10 bar (min. 6.5 bar required at machine) - Machine Weight: approx. 2,900 kg (with tool changer)

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, HENRI HAUSER OP3 High-precision drilling machine / coordinate drilling machine / jig boring machine (Made in Bienne/Biel, Switzerland). Excellent condition! Machine available online for only 3 more weeks (until November 16, 2026). The offer has been updated with even more accessories! Tool package with a value of approximately 12,500 EUR. A unique opportunity for connoisseurs of these machines at a special price. Hauser coordinate drilling machines in this condition are now mostly only available from specialized dealers in Switzerland, but at considerably higher prices, up to three times my asking price. Please compare for yourself! Due to the many inquiries: please only contact us if you are a serious buyer with a genuine intention to purchase; installment payments will not be accepted! As long as the advertisement is online, the machine is still available. An inspection while the machine is powered on is expressly possible. To be sold only to appreciative owners, such as watchmakers, precision engineering workshops, or testing workshops/prototype construction facilities, not to profit-oriented dealers. The coordinate drilling machine was with its first owner for 41 years and features the rare option of a motorized table drive/rapid traverse in the X and Y axes, as well as potentiometers. The stepless feed in the X-axis also allows for light milling and surfacing operations. This eliminates the tedious manual cranking required in all other Hauser coordinate drilling machines. The machine features thermal stabilization and expansion compensation. For this purpose, 2 heaters are provided, which are switched on separately before starting work to maintain high accuracy and dimensional precision. This explains the factory-specified high positioning accuracy of 0.002 mm. It should be noted that the machine has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a major advantage for precise drilling and surfacing in depth with Wohlhaupter, spindle tools, etc. With the options mentioned and in this first-class condition, it is very rare and highly unlikely to be available again in this form. Pjdpfxezuvwlo Airsrc These machines are primarily used in the watch industry, gunsmithing, precision engineering, material testing, and the optical industry, where the highest precision is required. Also ideally suited for engine construction/overhaul, special machine construction, etc. All documents, manuals, electrical diagrams, etc. are available in their original form! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle connection MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds stepless from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 stages from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 hp Dimensions machine: Length = 1400 mm, Width = 1250 mm, Height = 1750 mm, Machine weight approx. 1500 kg. Payment for the machine will be made, as is customary for used machines, in full before loading, no partial or installment payments! I prefer the machine to be picked up by the buyer via a shipping company or in their own truck. Loading onto a truck is free for the buyer. Shipping (direct transport without transshipment) within the EU is still

Condition: good (used), Year of construction: 2004, Equipment: documentation/manual, Deckel FP1 Universal Milling Machine – Heidenhain TNC 123 Technical Data: Manufacturer: Deckel Type: FP1 Machine: Universal Milling Machine Control System: Heidenhain TNC 123 Travel in X-axis: 300 mm Travel in Y-axis: 160 mm Travel in Z-axis: 340 mm Quill Travel: 80 mm Spindle Speed: 40–2,000 rpm Spindle Taper: ISO 40 Prjdpfo Agghajx Airec Feed Rate Range (3 axes): 5–500 mm/min, continuously adjustable Rapid Traverse Rate (3 axes): 1,200 mm/min

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 750 mm, spindle speed (max.): 2,800 rpm, spindle motor power: 5,500 W, number of axes: 2, Vertical machining centre manufactured in 1997. This DONAU Danumeric 440 features a drilling capacity of 40 mm in solid steel and 50 mm in cast iron. It offers a spindle speed range of 15 – 2,800 rpm and a quill travel of 200 mm. The standard work table dimensions are 600 x 1,200 mm. If you are looking to get high-quality machining capabilities, consider the DONAU Danumeric 440 machine we have for sale. Contact us for further details. - Drilling Capacity in Solid Steel (St 60): 40 mm dia.- Drilling Capacity in Cast Iron (GG 22): 50 mm dia.- Tapping Capacity (Steel St 60): M 36- Tapping Capacity (Cast Iron GG 22): M 45- Tool Taper: SK 40 (DIN 69871, Form A)- Spindle Speed Range: 15 – 2,800 rpm (infinitely variable)- Spindle Motor (AC, frequency-controlled): 5.5 kW- Spindle Torque: max. 250 Nm (constant from 15 to 200 rpm)- Gearbox: 2-step automatically shifting (i_max 1:7)- Quill Feed (Z-Axis): 5 – 2,000 mm/min (infinitely variable)- Quill Travel / Stroke (Z-Axis): 200 mm- Quill Feed Force / Pressure: 12,000 N- Column Elevation / Hub (W-Axis): 410 mm- Column Diameter: 195 mm- Radial Arm Travel: 750 mm- Drilling Radius: min. 540 mm / max. 1,290 mm- Standard Work Table Dimensions: 600 x 1,200 mm (with 4 T-slots 18 mm, pitch 125 mm)- Table Height: 900 mm- Distance Spindle Nose to Table: 95 – 705 mm- Distance Spindle Nose to Floor: 995 – 1,605 mm- Maximum Workpiece Dimensions: L 2,950 mm x W 1,050 mm x H 1,350 mm- Rapid Traverse (X / Y Axis): 7.5 m/min- Rapid Traverse (Z-Axis): 5.0 m/min- Rapid Traverse (W-Axis): 3.0 m/min- Positioning Accuracy (X, Y): ± 0.075 mm- Repeatability (X, Y): ± 0.030 mm- Positioning Accuracy (Z, W): ± 0.05 mm- Repeatability (Z, W): ± 0.03 mm- Control System: 32-Bit CPU CNC Control (4 axes: X, Y, Z, W)- Screen: 9" Electroluminescent Display (EL, illuminated)- Program Memory: 2,000 NC blocks- Interfaces: V.24 / RS-232-C- Operating Voltage: 400 V / 50 Hz- Control Voltage: 24 V DC- Connected Load: 13.0 kVA- Machine Weight: approx. 2,610 kg (with 600 x 1,200 mm table) Technical Specification Prodpfxs Agm Iae Airjc Taper Size SK 40

Condition: used, Year of construction: 2008, operating hours: 30,166 h, functionality: fully functional, machine/vehicle number: M11W10048, travel distance X-axis: 610 mm, travel distance Z-axis: 2,500 mm, CNC turning center EMCO Maxxturn 110 | Year of manufacture 2008 | Spindle A2-11" & Y-axis For sale is a powerful CNC turning center for complete machining from the manufacturer EMCO, model Maxxturn 110. Equipped with the large A2-11" main spindle (ZF two-stage gearbox), C-axis, Y-axis and driven tools, the machine is ideal for heavy-duty machining and complex milling operations. General machine data * Manufacturer: EMCO * Model: Maxxturn 110 * Year of manufacture: 2008 * Serial number: M11W10048 * Control: Siemens SINUMERIK 840D (with ShopTurn) * Machine weight: 6,000 kg (L2500) Working area * Swing diameter over bed: 820 mm * Swing diameter over cross slide: 550 mm Predpfe Afdphex Airsc * Max. turning diameter: 610 mm * Max. part length: 2,500 mm (depending on equipment) * Distance between centers: 1,666 mm / 2,666 mm Travel paths & feeds * X-axis: 410 mm (rapid traverse: 24 m/min) * Z-axis: 2,560 mm (rapid traverse: 30 m/min) * Y-axis: -80 / +100 mm (rapid traverse: 12 m/min) Main spindle (A2-11") * Spindle connection: A2-11" (KK11) DIN 55026 * Drive: ZF gearbox motor (2-stage: 1:1 / 1:4) * Speed range: 0 - 2,500 rpm * Drive power (100/40% ED): 35 / 42 kW * Torque (100/40% ED): 1,672 / 2,000 Nm * Spindle bore: 125 mm * Bore in draw tube (partial hollow shaft): 110 mm * Bearing inner diameter (front): 190 mm * Clamping device: Röhm power chuck (prepared for max. 400 mm) C-axis * Drive: Automatically swiveling gearbox motor * Torque: 2,000 Nm * Holding torque spindle brake: 2,400 Nm * Rapid traverse: 15 rpm Tool turret & driven tools * Number of stations: 12 (all drivable) * Tool holder: VDI 50 (DIN 69880) * Additional holders: 12 block tool stations on the circumference * Switching time (incl. locking): 0.5 s * Speed of driven tools: 0 - 4,000 rpm * Power of driven tools: 10 kW * Torque of driven tools: 56/66 Nm (Siemens) Tailstock & steady rest * Quill stroke: 150 mm * Quill diameter: 150 mm * Shank: MK 5 * Max. clamping force: 22,500 N * Steady rest: Prepared for traveling steady rest (e.g. Röhm SLZ 1152) Coolant & disposal * Chip conveyor (integrated into the base machine)

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 011.007, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, controller model: AGIEMATIC T, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 350 mm Travel range, Y-axis: 250 mm Travel range, Z-axis: 350 mm Rapid traverse: approx. 720 mm/min Number of axes: 4 (X, Y, Z, C) Pods Afxzvjpfx Airjrc Table size: 600 × 450 mm Workpiece dimensions: max. approx. 860 × 620 × 350 mm Workpiece weight: max. 400 kg Electrode weight: max. 100 kg Working tank (internal): approx. 830 × 590 × 350 mm Distance from table to quill: 170–520 mm MACHINE DETAILS Control system: AGIEMATIC T Generator: AGIEPULS 60 Power connection: 400 V / 50 Hz Dimensions & Weight Dimensions (L × W × H): approx. 3,000 × 1,700 × 2,580 mm Machine weight: approx. 2,550 kg

Condition: good (used), Year of construction: 2000, Donau Danuflex 145 Donau Danuflex 145 high-speed radial drilling machine, year of manufacture 2000, in SUPER condition CE compliant!! Technical data: Year of manufacture: 2000 Drilling and threading capabilities Drilling capacity in steel: approx. 42 to 45 mm Threading: up to M36 Tool holder / spindle: MK 4 Spindle speed: 15 to 2,800 rpm (infinitely variable) [1, 2, 3] Travel distances & work area Outrigger travel: 1,050 mm Drilling radius: min. 540 mm / max. 1,590 mm Quill stroke: approx. 200 to 220 mm Column stroke (W-axis): approx. 450 mm Column diameter: 195 mm Table & dimensions Work table: typically approx. 1,200 x 750 mm with 5 T-slots Work table height: approx. 905 mm (ergonomic design for standing operation) Feed: automatic / stepless quill feed with electromagnetic feed clutch Equipment (standard): Threading device, hydraulic clamping for outrigger and lifting column, central lubrication and machine light Accessories and equipment: Several work tables Prjdpfx Aijz Rwpysrsc About the machine: Offered is a Donau Danuflex 145 high-speed radial drilling machine. This high-speed radial drilling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Up to 3 fixed machining stations ensure maximum flexibility in the machining of workpieces, both large and small, as well as very long parts. Swivel tables allow the machining of angled bores. Large travel distances and workpiece heights up to 1500 mm are ensured. Effortless, simultaneous positioning to a drilling position in 3 axes. A self-centering spindle head positions itself precisely in centering bores. Concentric countersinking is achieved by self-centering countersinks in the bore. The guides are regularly lubricated by the central lubrication system. The Donau has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Donau on site under power. You can find more drilling machines from well-known manufacturers on our website.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3 from a vocational school!! Technical specifications: >> Machine no. 1212 >> Swivel and tilting table >> Speed: 40 - 2000 rpm >> Feed rate and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel distances X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Collet system S20x2 >> Weight approx. 1300 kg Accessories and equipment: >> Coolant system >> Central lubrication About the machine: Psdpfx Ao Afyy Hoirerc For sale is a Deckel FP3 universal milling machine in good condition. All spindles can be moved easily. Most of the bellows are new. An oil change has been performed. Mechanically and electrically inspected. Take advantage of the opportunity to inspect and test the Deckel on-site while it is powered. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: good (used), Year of construction: 2014, Knuth Sinus 330 x 1500 Knuth Sinus 330 x 1500 lathe, manufactured in 2014, in very good original condition. The machine comes from a special production run by a renowned German machine tool company. CE compliant!! Technical data: Year of manufacture: 2014 Knuth Sinus 330 x 1500 Working area: Workpiece length: 1,500 mm Turning diameter over bed: 660 mm Turning diameter over cross slide: 440 mm Turning diameter without bridge: 900 mm Bridge length: 320 mm Bed width: 400 mm Travel distances: Travel X-axis: 368 mm Travel Z1-axis: 230 mm Swivel range of top slide: 45° Main spindle: Spindle speed: 25 rpm - 1,600 rpm Spindle bore: 105 mm Spindle mounting: D1-8 Spindle taper: ø 113 mm / 1:20 Rapid traverse: Rapid traverse X-axis: 2,000 mm/min Rapid traverse Z-axis: 4,000 mm/min Tailstock: Tailstock spindle diameter: 90 mm Tailstock taper: 5 MK Tailstock quill stroke: 235 mm Tailstock cross slide: ± 12.5 mm Drive power: Motor power, main drive: 7.5 kW Dimensions and weights: Dimensions (L x W x H): 3.21 m x 1.23 m x 1.6 m Weight: 2,800 kg About the machine: Predsz Irwfopfx Airjc The Sinus D is the largest series in the universal lathe segment. Conventional lathes like this are characterized by their robust design and high versatility. The design follows a classic design, but is based on a heavy, one-piece cast machine bed. As with heavy-duty lathes, the power transmission between motor and spindle is also achieved here via a manual lamellar clutch. With integrated functions such as the removable bed bridge, rapid traverse, and a taper turning device, this series offers optional solutions for machining long workpieces or large flanges. One-piece heavy cast bed with high stability Massive headstock with large spindle bearings Rapid traverse in 2 axes for fast positioning Taper turning attachment for additional applications Well-designed safety features You can find more lathes from well-known manufacturers on our website.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3 from a training workshop!! Technical data: >> Machine no. 1399 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel ranges X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle Prsdo Afy Elspfx Airsc >> Extendable vertical quill and horizontal quill - SK-40 >> Clamping system S20x2 >> Weight approx. 1300 kg Accessories and equipment: >> Coolant system >> Central lubrication About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles can be moved easily. Most of the bellows are new. An oil change has been carried out. Mechanically and electrically inspected. Take advantage of the opportunity to inspect and test the Deckel machine on-site while it is powered up. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 from a training center Predpo Afy Ngsfx Airec Technical data: >> Machine no. 9502, year of manufacture approx. 1978 >> Swivel-tilting rotary table >> Speed: 40 - 2000 rpm >> Feed rate and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travels X/Y/Z: 400/200/400 mm >> Equipment: Vertical and horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Clamping system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> Coolant system >> Brake motor About the machine: A Deckel FP2 universal milling machine in good condition is offered. All spindles can be easily moved. Most of the bellows are new. The previous owner installed a brake motor. An oil change was carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel on-site while it is powered up. The machine is immediately available. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: good (used), functionality: fully functional, overall weight: 700 kg, For sale is a used Deckel FP1 milling machine in good working condition. The machine has feed in the X and Z axes. Travel ranges XYZ: 300x150x340mm Tool holder: SK40 S20x2 Spindle speeds: 40-2000 rpm Quill with 60mm stroke Ideal machine for toolmaking or prototype production. Already the new version of the FP1 with selector dials for speed and feed selection. Included: - High-quality hydraulic vise - Chip tray Milling cutters and tool holders can also be included upon request. Psdpfx Aioz Aa Iderjrc Loading options (forklift) are available. Shipping is also possible upon agreement. Inspection under power and collection in 5023 Salzburg.

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, spindle diameter: 130 mm, spindle speed (max.): 1,500 rpm, table length: 1,800 mm, table width: 1,600 mm, feed length W-axis: 600 mm, TOS Varnsdorf WHN 13 A table type horizontal boring mill (borer), year of construction 1982. The machine has been retrofitted with a FANUC CNC control; maximum spindle speed 1,500 rpm. Well maintained and in working condition. Technical data: - Table size: 1,600 x 1,800 mm - X travel: 3,500 mm - Y travel: 2,000 mm - Z travel: 1,000 mm - W travel (boring spindle / quill): 600 mm Prodpfxez An Ufj Airsc - Spindle diameter: 130 mm - Max. spindle speed: 1,500 rpm - Control: FANUC (retrofit) Available for inspection in our workshop and ready for immediate delivery.