Used Quill for sale (1,264)

Condition: good (used), Year of construction: 1994, functionality: fully functional, Technical details table length 840 mm table width 600 mm ampere 60-120 A total power requirement 15-23 kVA weight of the machine ca. 2,75 t dimensions of the machine ca. 2760 x 1110 x 1840 m Additional information With controlled C-axis and 16-position tool changer. WORKTABLE Cpsdpfx Afsyf Dbzjpeu Table size: 840 x 600 mm Dielectric above table: 360 mm Maximum workpiece weight: 1000 kg T-slots: 4 x 10 mm Distance table to quill without chuck (max / min): 595 / 180 mm WORKHEAD X - Y travel: 565 x 400 mm Z travel: 415 mm X - Y - Z resolution: 0.001 mm C-axis resolution: 0.001 deg. Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg DIELECTRIC SUPPLY Tank volume: 400 liters Paper candle filters: 4 pieces GENERATOR Dimensions (height x width x depth): 1800 x 600 x 920 mm Weight: 300 kg Rated current: 60 – 120 A Power rating: 15 – 23 kVA Dimensions (height x width x depth): 2760 x 1110 x 1840 mm Weight: 2750 kg

Condition: good (used), Year of construction: 2023, functionality: fully functional, Machine Parameters: Swing diameter over bed: 750 mm Maximum turning length: 4000 mm Swing diameter over cross slide: 560 mm Description: The machine is in good technical condition and can be inspected by prior arrangement. The machine was installed in 07/2023 and has seen very little use. Total operating hours are 3900, of which the spindle has run for 540 hours. Swing diameter over bed: 750 mm MACHINE SPECIFICATIONS: STYLE 750 Model: STYLE 750 Swing diameter over bed: 750 mm Swing diameter over cross slide: 530 mm Distance between centers: 4000 mm Bed width: 450 mm Maximum load between centers: 1800 kg Maximum load with fixed steady rest (type U): 2500 kg Main Spindle: Spindle motor power (S6): 26 kW Maximum spindle speed (number of speed ranges): 2000 rpm (3) Spindle bore: Ø105 mm Spindle nose: A2-11 X and Z Axis: Ball screw diameter X axis: 32 mm Ball screw diameter Z axis: 50 mm Rapid traverse: 8 m/min Feed range: 0.01-2000 mm/min Tailstock: Quill diameter: 125 mm Quill travel: 225 mm Quill taper: MT 6 General: Machine weight: 8150 kg Machine color: Frame RAL 7021, Panels RAL 9006 Machine dimensions: 6.3 x 2.3 x 2.2 m The machine will be supplied with: - Machine lighting: LED - Coolant system - Automatic lubrication Cedpfsyg R Tgsx Afpjpu - Steel ball screw covers - Full enclosure - Front sliding doors - Electronic handwheel - Constant cutting speed, chip conveyor Including additional equipment: - Automatic tool changer, 8 positions, VDI-50 - Heavy-duty tailstock, desktop PC software version - 26 kW main motor, handwheel, oil separator - Steady rest D50-300mm, steady rest D60-400mm - Coolant pump switch - 3-jaw chuck D315 – Schunk Rota S Plus2.0 - Speed potentiometer - LED lamp, LAN, heavy-duty coolant system with spray gun Swing diameter over cross slide: 530 mm Distance between centers: 4000 mm Bed width: 450 mm Maximum load between centers: 1800 kg Maximum load with fixed steady rest (type U): 2500 kg Main Spindle: Spindle motor power (S6): 26 kW Maximum spindle speed (number of speed ranges): 2000 rpm (3) Spindle bore: Ø105 mm Spindle nose: A2-11 X and Z Axis: Ball screw diameter X axis: 32 mm Ball screw diameter Z axis: 50 mm Rapid traverse: 8 m/min Feed range: 0.01-2000 mm/min Tailstock: Quill diameter: 125 mm Quill travel: 225 mm Quill taper: MT 6 General: Machine weight: 8150 kg Machine color: Frame RAL 7021, Panels RAL 9006 Machine dimensions: 6.3 x 2.3 x 2.2 m The machine will be supplied with: - Machine lighting: LED - Coolant system - Automatic lubrication - Steel ball screw covers - Full enclosure - Front sliding doors - Electronic handwheel - Constant cutting speed, chip conveyor Including additional equipment: - Automatic tool changer, 8 positions, VDI-50 - Heavy-duty tailstock, desktop PC software version - 26 kW main motor, handwheel, oil separator - Steady rest D50-300mm, steady rest D60-400mm - Coolant pump switch - 3-jaw chuck D315 – Schunk Rota S Plus2.0 - Speed potentiometer - LED lamp, LAN, heavy-duty coolant system with spray gun

Condition: used, Year of construction: 1999, Max. Turning length 6.020 mm centre height 550 mm centre distance 6.000 mm max. swing over bed 1.100 mm max. swing over facing slide 730 mm Csdpfxoydqqyo Afpepu max. workpiece weight 6.000 kg Spindle diameter in forward position 178 mm faceplate diameter 1.000 mm spindle bore 128 mm tailstock quill taper MT 6 diameter of quill 140 mm max. chucking diameter 500 mm control WEILER Lathe - cycle-controlled | WEILER - E110 x 6.000 equipped with a PARAT tool system as well as a chip conveyor. A comprehensive tool package, including several steady rests and a heavy-duty boring bar holder, is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition and can be inspected under power at any time in the Swiss factory location. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-110 | E 110 | E110 x 6000 | E110x6000 | E 110 x 6.000

Condition: used, Year of construction: 1980, VDF Wohlenberg Type:V1400 Parts . Top support : Overall height : 600 mm Overall length : 650 mm Base plate : 350 mm X 350 mm Base plate holes diameter : 22 mm Spacing: width 240 mm lengthwise : 290 mm Csdpfx Afjtttigspopu Tool holder mounting : 100 mm X 45 mm Thread tool holder M30 . Tailstock: Center height : 630 mm Quill diameter : 100 mm Base plate : 500 mm X 400 mm . Faceplate : Diameter 1000 mm Width : 125 mm with 3 jaws Spindle holder 250 mm 4 bores diameter 20 mm pitch circle 200 mm . Sale individually or in a package possible .

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Cpodpfsxlqxfex Afpsu Condition: good, workshop-tested, speed variator with new bearings

Condition: good (used), Year of construction: 2008, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, Heidenhain TNC 124 control quill electronical hand wheel Cpedjrb A Tcopfx Afpou coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 350 mm, 3-axes digital read out Cpedpfxjwyit Hj Afpju horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 450 mm Querweg Y / Y-travel cross 300 mm Senkrechtweg Z / Z-travel vertical 350 mm Tischgröße / table size 800x400 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-400 mm/min. Antriebsleistung / power capacity 3,2 kW Gewicht der Maschine / weight 1500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Metba MB1 with 3-Axis Digital Readout Technical Specifications: >> Year of manufacture: approx. 1980 >> 3-axis digital readout (Mitutoyo) >> Fixed angle table >> Spindle speed: 45 - 2050 rpm >> Feed on 2 axes: 11-490 mm/min >> Travel (X/Y/Z): 300/150/340 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill extendable – SK-40 >> Drawbar system S20x2 >> Weight: approx. 700 kg Accessories and Features: Cedpfxsydc Sps Afpepu >> 3-axis digital readout (Mitutoyo) >> Coolant system >> Various tool holders >> Operating manual About the Machine: For sale is a Metba MB1 universal milling machine in very good condition. The Metba operates smoothly even at high spindle speeds. There is minimal backlash and all spindles move easily. The MB1 comes from private ownership and has seen very little use. Mechanically and electrically tested. The digital readout enables easier and more precise work. You are welcome to inspect and test the machine under power on site.

Condition: excellent (used), Year of construction: 1998, travel distance X-axis: 290 mm, travel distance Z-axis: 1,920 mm, spindle motor power: 11,000 W, 3 chuck ca 400 mm Duplomatic 8 position revolver Steady rest big 400 mm Cedeyfd Hwepfx Afpspu Steady rets normal 300 mm Pinole taper: 6Mk Stroke pinole: 180mm Quill Ø: 95mm Length: 3300mm Width: 1800mm Height: 1700mm Weight: 4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE For sale is a lightly used Drechselmeister Stratos FU 230 woodturning lathe with a center distance of 680 mm and a 2 HP motor. The demonstration machine is in very good condition. Technical Specifications - Center height: 230 mm - Swing diameter: 455 mm (up to 800 mm with optional outboard turning attachment!) - Center distance: approx. 680 mm (extendable!) - Spindle mount: M33 x 3.5 (hardened) with ASR (Euro) anti-release groove* - Spindle and tailstock taper: MT2 Cedpfxoyaphvs Afpjpu - Speed range (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel: 100 mm (with scale and trapezoidal thread) - Motor: 2 HP (connection 230 V) - Weight: 178 kg The machine is located in A-5431 Kuchl and can be viewed at any time during our business hours. Subject to prior sale! Related search terms: woodturning lathe, lathe, turning machine, turning bench, turning tools, woodturning, turning, machine Reference: R-A0117

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE For sale: a used Drechselmeister STRATOS XL woodturning lathe with a 3 HP motor! The demonstration machine is in very good condition. Technical data: - Center height: 280 mm - Swing over bed: 550 mm (up to 1,000 mm with optional bed extension / outboard turning device!) - Distance between centers: approx. 780 mm (expandable!) - Spindle thread: M33 x 3.5 with ASR (Euro) anti-rotation groove* - Headstock and tailstock with Morse taper MK2 - Frequency inverter (3 belt speeds): - Speed 1: 60 – 1,200 rpm - Speed 2: 100 – 2,200 rpm - Speed 3: 150 – 3,700 rpm - Quill travel: 150 mm (with scale) - Tailstock quill with trapezoidal thread and quick-change system (for ER25 drill quill) - Motor: 3 HP - Weight: approx. 320 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: woodturning lathe, lathe, turning machine, wood lathe, woodturning, turning tools, spindle turning, turning, machine Reference: R-A0117 Cjdpfjyapc Hox Afpjpu

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 2,500 rpm, total height: 1,785 mm, overall weight: 3,850 kg, number of axes: 2, This Weiler E50 was manufactured in 2009. A robust horizontal turning machine featuring a swing diameter over bed of 570 mm and a spindle bore of 83 mm. It offers a bed width of 350 mm and a turning tool cross-section of 32 x 25 mm. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • Spindle diameter in the front bearing: 120 mm • Spindle bore: 83 mm Csdpfxsx D Ibbe Afpjpu • Inner taper of the main spindle: metric 90 • Feed range longitudinal and planar: 0-20 mm/rev • Feed force longitudinal: 10000 n • Feed force planar: 7000 n • Input speed longitudinal/planar: 10/7 m/min or 5/3. 5 m/min • Metric threads: 0. 1-400 mm • Inch threads: 1/4" - 56 g/1" • Module threads: Technical Machine Benefits • Drive power (60% / 100% ed): 20/17 kw • Max. Torque at the turning spindle: 1600 nm • Gear stage i: 1-625 min-¹ • Gear stage ii: 4-2500 min-¹ • Bed width: 350 mm • Quill diameter: 80 mm • Quill stroke: 200 mm • Inner taper of the quill: mk 5 • Turning tool cross-section (height/width): 32 x 25 mm • Spindle head according to din 55027: size 8 Extra Information Machine still under power/ DP threads: 1 - 224/ Fixed steady rest clamping range: 12-150 mm / 120-270 mm/ Moving steady rest clamping range: 12- mm/ The machine has been working effectively in 1-shift operation since it was purchased/ The chuck incl. hard & several sets of soft jaws and the tailstock can be supplied as accessories/ Any associated tools could be discussed in the event of an order/ The footprint of the machine is 2.8m x 5.2m, the 2.8m already includes 600mm as a workstation/ All manuals are available. Dimensions Machine Depth 3250 mm

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, CNC Lathe - Horizontal / Brand: GEMINIS / Type: GEMINIS GT9 G2 (heavy series) / Year of construction: 2015 The machine can be inspected by appointment under power. TECHNICAL DATA: - Max swing over bed: 2.000 mm - Distance between centers: 8.000 mm - Height of centres: 1.050 mm - Swing over slide: 1.600 mm - Main spindle bore Ø: 150 mm - Main spindle nose: DIN 55026-15 - Speed range: 4 - Speed range I: 0-80 rpm - Speed range II: 0-175 rpm - Speed range III: 0-350 rpm - Speed range IV: 0-700 rpm - Cross slide travel: 1.060 mm - Quill Ø: 400 mm - Quill travel: 300 mm - Max. weight allowed between centers: 30 tons Machine base: Cpodpjvuih Ujfx Afpju - Distance between the guideways: 1.350 mm - Height of the machine base: 650 mm EQUIPMENT / ACCESSORIES: - CNC-Control: FAGOR 8065 - Independent 4-jaw chuck: Ø 1.600 mm - Set of hard inner and outer claws - Square automatic turret: SAUTER 4 pos – Ø 320 x 320 mm - Tailstock and quill: Motorised - Quill placement: Built-in Rotating - Automatic Locking/Unlocking of the tailstock body - Air conditioner for electronic cabinet - Portable electronic handwheel - Chip conveyor - 4-support Closed steady rest: Ø 500-900 mm - Permissible weight allowed for steady rest: 10 tons - Prepared for C-axis with transmission from main engine - Preparation for subsequent adaptation of a milling head with Y axis on turret - Preparation for rectifier head assembly - Very well-equipped with tools Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: new, The SSB 40 F Super VT, a robust Column Drilling Machine from KNUTH, is expertly designed for precision drilling, countersinking, reaming, and tapping in various settings, from maintenance tasks to finishing operations. This drill press features a sturdy construction with a thick-walled column and a large throat, ensuring stability and reliability during operation. With its advanced touchscreen control panel, users can easily select the necessary operating parameters, while the infinitely variable spindle speed allows for flexibility in machining. The motorized vertical movement of the setup table simplifies the handling of heavy parts, making it ideal for custom and small-series machining. Standard equipment includes a powerful LED work lamp, a coolant device, and an automatic quill feed with an intuitive manual transmission. You can expect exceptional performance for your drilling needs. For more information or to request a quote, consider the SSB 40 F Super VT, a top choice in the Column Drilling Machines category. Cedpfenp Hymjx Afpopu

Condition: used, Year of construction: 1994, turning diameter 570 mm turning length 2000 mm control Sinumerik 805 Siemens swing diameter over face slide 365 mm main spindle speeds: 3-2.500 U/min drive of main spindle 15/19 kW spindle bore 62 mm Cpjdpfxju Sbkgo Afpsu spindle head DIN 55027 No.8 tailstock taper MT 5 quill stroke 190 mm pinole diameter 80 mm feed range - long. and cross 0,01-50 mm/u total power requirement 50 KVA weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 320 mm z-travel 450 mm Control Haidenhain TNC 124 drive of main spindle 3 kW number of spindle speeds 63-3150 u/min tool taper SK 40 stroke of quill vertical 60 mm feed speeds 5-2000 mm/min Cedpjxndahsfx Afpjpu rapid traverse 2 m/min work table: 800x320 mm coolant 20 l/min total power requirement 5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,2x2,4x1,6 m

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: SINUMERIK 828D, _____ Description: Year of manuf. : 2022 Control : Siemens SINUMERIK 828D Turning diam. : 288 mm Turning length : 243 mm Work area max. turning diameter:288mm max. machining length:243mm X-axis:175mm Z-axis:350mm Main spindle Chuck diameter:210mm Max. bar diameter:67mm Spindle bore diameter:76mm Drive power:10.5/20 kW max. torque:213 NM max. speed:4,500 rpm Tailstock Quill diameter:65mm Quill stroke:80mm Axial force:4,312 N Center point adapter:MT4 Tool turret Cpjdjyavz Ajpfx Afpsu Number of tool stations:12 Tool holder:BMT45 Powered tools:Yes Max. speed:5,000 rpm

Condition: used, Year of construction: 2009, Technical details: turning diameter: 800 mm Cedpfxeyb R Exe Afpepu turning length: 4500 mm control: 840-3 Circulation diameter via slide valve: 510 mm Shift of the planing slide: 410 mm bed width: 480 mm spindle head: DIN 55027 Gr. 11 spindle bore: 106 mm speeds:: 1-1800 1/min diameter of quill: 115 mm Inner cone of the quill: MK 6 quill stroke: 225 mm total power requirement: 37/30 kW dimensions of the machine ca.: 6500 x 2500 x 1950 mm weight of the machine ca.: 8000 kg Equipped as follows: - 3-jaw chuck - 700 mm steel faceplate - Drill stand - PARAT tool post - Chip conveyor - Dust extraction - Heavy-duty coolant pump - Spindle brake

Condition: used, Year of construction: 2001, turning diameter 720 mm turning length 2.000 mm control FAGOR 8055 turning diameter over slide 470 mm feed 8 m/min spindle nose DIN-55027-11 spindle passage 104 mm number of spindle speeds 0-1600 U/min/rpm spindle drive 17/ 20.5 kW Torque 1590/1920 Nm total power requirement 28 kW weight of the machine ca. 4.9 t dimensions of the machine ca. 6.600 x 2.300 mm Tailstock Tailstock quill diameter: Ø 100 mm Tailstock quill travel: 200 mm Tailstock quill taper: Morse taper MT 6 Turret 4-position automatic turret Machine Equipment Full rear protection enclosure Hydraulic 3-jaw chuck SMW AUTOBLOCK 400 GH Cedpox Hp Dfsfx Afpspu Fixed steady rest, capacity 50–220 mm Maximum Permissible Weights Max. workpiece weight between centers: 2,560 kg With 1 steady rest / with 2 steady rests: 3,200 kg / 4,000 kg Free-standing, center of gravity at 250 mm: 800 kg

Condition: used, Year of construction: 2009, x-travel 3.000 mm y-travel 2.500 mm z-travel 2.475 mm w-axis 800 mm rotary table Juaristi MG-12 Rotary table surface 2.000 x 2.500 mm T-slots 11 T-slot - width 170 mm Cpodpfeu D I R Djx Afpeu table weight 8.000 Kg table rotation B- Achse – 0,001 ° Control HEIDENHAIN i TNC-530 diameter of quill 130 mm speed 3.000 U/min tool taper ISO 50 DIN 69871/1-B swivelling +/- 2,5/2,5 Grad spindle drive 30 kW transmission ratio 2 speeds: 0-2.500 U/min boring spindle D`ANDREA UT5-800-S mm/min diameter 800 mm cross travel 250 mm Tools changer 30 pos. Internal cooling system 20 bar Chip coveyor Inkl. handwheel HEIDENHAIN HR-420 weight of the machine ca. 45 t dimensions of the machine ca. 9.800 x 7.320 x 5.500 m -TS-3 head, TS-5 column and longitudinal bed INCLUDED: - Part touch probe RENISHAW RMP-60 - External coolant - 20 bar Internal coolan - protecting guards - mobile operator platform for control panel - Chip Conveyor - Handwheel HEIDENHAIN HR-420

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 3,500 rpm, travel distance X-axis: 680 mm, travel distance Y-axis: 95 mm, travel distance Z-axis: 680 mm, spindle motor power: 18,500 W, total height: 1,950 mm, overall weight: 4,800 kg, product length (max.): 3,380 mm, number of axes: 3, This 3-axis Hyundai Wia HD2600Y horizontal turning machine was manufactured in 2025. It features a swing over the bed of Ø820 mm, a maximum turning diameter of Ø300 mm, and a turning length of 610 mm. The spindle supports up to 3,500 rpm with a motor power of 18.5 kW. It includes a 12-tool turret and a milling tool speed of 6,000 rpm. Consider the opportunity to buy this Hyundai Wia HD2600Y horizontal turning machine. Contact us for more information. • Condition • Original packaging • 0 operating hours Capacity • Swing over bed: Ø820 mm Cpodsycwlzspfx Afpou • Swing over carriage: Ø650 mm • Max. turning diameter: Ø300 mm • Max. turning length: 610 mm • Bar capacity (sub): Ø81 mm • Chuck size (main): 10" Spindle • Spindle bore (main): Ø91 mm • Motor (max/cont.) (main): 18.5/15 kW (25/20 HP) • Motor (max/cont.) (sub): 5.5/3.7 kW (7.4/5 HP) • Torque (max/cont.) (main): 400.7/243.7 Nm (295.7/179.9 lbf·ft) • Torque (max/cont.) (sub): 46.6/25.3 Nm (34.4/17.7 lbf·ft) • Spindle type: Belt • Spindle nose (main): A2-8 • Spindle nose (sub): Ø110 mm • C-axis indexing: 0.001° Feed • Travel (Z/2B): 680 / 680 mm • Rapid traverse (X/Y): 30 m/min • Rapid traverse (Z/2B): 24 / 24 m/min • Slide type: Box guide Turret • No. of tools: 12 (24) • Tool size (OD): Ø25 mm • Tool size (ID): Ø40 mm • Indexing time: 0.2 sec • Y-axis type: Wedge type Live tool • Milling tool speed: 6,000 rpm • Motor (max/cont.): 5.5/3.7 kW • Torque (max/cont.): 52.6/25.6 Nm • Collet size: Ø16 mm (ER25) • Type: BMT55 Tailstock • Taper: MT#4 • Quill diameter: Ø80 mm • Quill travel: 120 mm • Travel: 680 mm Tank capacity • Coolant tank: 200 l • Lubricating tank: 2 l Power supply • Electric power supply: 27 kVA • Thickness of power cable: Over 25 mm² • Voltage: 220/60 (200/50) CNC • Controller: HYUNDAI WIA FANUC i-Series – Smart Plus / SIEMENS 828D

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 6,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 560 mm, total height: 1,700 mm, overall weight: 3,550 kg, controller manufacturer: FANUC, controller model: i – SMART PLUS, product length (max.): 2,970 mm, number of axes: 3, This Hyundai WIA SE 2200 LM was manufactured in 2025. It features a maximum turning diameter of Ø300 mm and a length of 529 mm, with a spindle speed of up to 6,000 rpm. The machine includes a 12-tool turret and supports milling with a tool speed also up to 6,000 rpm. Ideal for precision turning and milling tasks. Contact us for more information about this machine. • Condition: Original packaging, 0 operating hours • Capacity • Max. swing: Ø600 mm • Swing over the carriage: Ø390 mm • Max. turning diameter: Ø300 mm • Max. turning length: 529 mm Cedjycv Egepfx Afpopu • Bar capacity (main): Ø32 mm • Chuck size (main): 5 • Spindle (Main) • Spindle bore: Ø42 mm • Motor (max/cont.): 7.5/3.7 kW (10/5 HP) • Torque (max/cont.): 63.6/23.6 Nm (46.9/17.4 lbf·ft) • Spindle nose: A2-5 • Spindle type: Flat type • C-axis indexing: 0.001° • Feed • Rapid traverse rate (X/Z): 15 m/min • Slide type: Roller LM guide • Turret • Number of tools: 12 (24) • Tool size (OD/ID): Ø20/Ø32 mm • Indexing time: 0.15 sec • Live tool • Milling tool speed: 6,000 rpm • Motor (max/cont.): 3.9/2.6 kW (5/3.5 HP) • Torque (max/cont.): 36.7/18.5 Nm (27.1/13.6 lbf·ft) • Collet size: ER20 (Ø13 (0.5")) • Type: BMT45 • Tailstock • Taper: MT#4 • Quill diameter: Ø55 mm • Travel: 580 mm • Tank capacity • Coolant tank: 200 l • Lubricating tank: 0.7 l • Power supply • Electric power: 23 kVA • Power cable thickness: Over 16 mm² • Voltage/frequency: 220 V, 50/60 Hz

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 3,500 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 680 mm, total height: 1,755 mm, overall weight: 5,800 kg, controller manufacturer: FANUC, controller model: Series, product length (max.): 3,400 mm, number of axes: 2, This Hyundai Wia HD 2600 horizontal turning machine was manufactured in 2025. It features a swing over the bed of 630 mm, a maximum turning diameter of 460 mm, and a bar capacity of 80 mm. The spindle supports a speed of 3,500 rpm with a motor power of 26/18.5 kW. It also includes a 10-tool turret and a rapid traverse rate of 24/30 m/min. If you are looking to get high-quality turning capabilities, consider the Hyundai Wia HD 2600 machine we have for sale. Contact us for more information. • Original packaging Capacity • Swing over the bed: 630 mm Cjdpfx Afsycvwcepspu • Swing over the carriage: 460 mm • Max. turning diameter: 460 mm • Max. turning length: 659 mm • Bar capacity: 80 mm • Chuck size: 10" Spindle • Spindle bore: Ø91 mm • Motor (max/cont.): 26/18.5 kW (35/25 HP) • Torque (max/cont.): 734/522 Nm (541/385 lbf·ft) • Torque (additional value stated): (828/748 Nm) • Spindle type: Belt • Spindle nose: A2-8 • C-axis indexing: 0.001° Feed • Rapid traverse rate (X/Z): 24 / 30 m/min (945 / 1,181 ipm) • Slide type: Box guide Turret / Tooling • No. of tools: 10 (12) • Tool size (OD): 25 mm • Tool size (ID): Ø50 mm • Indexing time: 0.15 sec Tailstock • Type: MT#5 (Built-in tail stock - MT#4) • Quill diameter: Ø100 mm • Quill travel: 120 mm • Travel: 680 mm Tank Capacity • Coolant tank: 180 L (47.6 gal) • Lubricating tank: 18 L (4.75 gal) Power Supply • Electric power supply: 27 kVA • Thickness of power cable: Over 16 mm² • Voltage: 220/60 (200/50)

Condition: good (used), Year of construction: 1986, travel distance X-axis: 710 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 455 mm, x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 4 Cpjdpfx Asyg Hkuofpju Speed: 6300 rpm Tool holder: SK40 Quill stroke: 80 mm Table size: 550 x 1000 mm Table load: 0.6 t Total power requirement: kW Machine weight approx.: 4 t

Condition: excellent (used), Year of construction: 1999, x-travel 400 mm y-travel 320 mm z-travel 400 mm Control HEIDENHAIN TNC 410 Codpfeunt Ihex Afpopu spindle turning speed - stepless 0 - 4000 U/min quill stroke 60 mm tool taper SK 40 table surface area 650 x 350 mm total power requirement 6,5 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,5 x 1,8 x 2,0 m Electric handwheel HR 410 Probe MP 11, automatic tool measurement TT 120 Cabin, tool holders,...