Used Quill for sale (1,323)

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital display, Heidenhain active control, and continuously variable feed. Technical data: >> Year of manufacture: 1982, Machine no. 2101-1995 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Continuously variable feed in 2 axes >> Rapid traverse in 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head, adjustable by 100mm on the spindle head >> Vertical quill and horizontal quill - SK40 Bsdpfx Abszrn Tyjtjwt >> Clamping system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Operating manual, parts list About the machine: Offered is a Deckel FP1 universal milling machine in very good original condition. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs smoothly. The FP1 was in a training workshop at a university and was used very little. This newer FP1 model has continuously variable feed in two axes, and the machine also has rapid traverse in these axes. A major advantage is the active 2-axis digital display. With this Heidenhain positioning control, you can enter dimensions that the machine will automatically approach. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital display makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: used, Year of construction: 1997, Mikron UME 600 - Vertical Machining Center Tool holder: SK40 Bwedpfx Aszpymyebtst X/Y/Z: 600 / 500 / 450 mm - Heidenhain TNC 407 CNC control - SARA UC1 SD3 air purifier - Coolant system - Chip conveyor - Year of manufacture: 1997 Technical data - Spindle taper: SK40 - Travel range X-axis: 600 mm - Travel range Y-axis: 500 mm - Travel range Z-axis: 450 mm - Feed rate range: 0 - 10000 mm/min - Spindle speed: 5 - 5000 rpm - Quill stroke: 90 mm - Table size: 900 × 530 mm - Spindle power: 6 kW - Total power requirement: 9 kW - Operating voltage: 400 V - Space requirement with control & extraction unit WxHxD: 3500 x 3000 x 3500 mm - Dimensions without control & extraction unit WxHxD: 2400 x 2100 x 2700 mm - Total weight: approx. 3400 kg

Year of construction: 2004, condition: good (used), machine/vehicle number: 041115166, Offer 26699 Technical data: - Largest turning diameter – Ø over bed 550 mm - over cross slide 310 mm - Turning length approx. 1500 mm - Travel distances – Z-axis 1600 mm - X-axis 300 mm - Spindle mount according to DIN - Spindle bore 82 mm - Taper of tailstock quill MK 5 - Travel of tailstock quill 150 mm - Spindle speeds 80 - 3500 rpm - Rapid traverse rates X / Y - Drive 17 kW Bwjdpszvna Ujfx Abtjt - with: - CNC control FAGOR - Hydraulic chuck - Electric handwheels - 8-position tool station - Manual tailstock - Coolant system - Space required approx. B 4400 x H 2100 x D 2300 mm - Weight approx. 4400 kg

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 3,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 1,000 mm, spindle motor power: 8,300 W, total height: 1,700 mm, total width: 1,750 mm, overall weight: 1,800 kg, controller manufacturer: FAGOR, controller model: 8055, product length (max.): 2,670 mm, number of axes: 2, Horizontal turning machine manufactured in 2001. This EMCO EMCOMAT 200X1000 features a turning length of 1,000 mm and a maximum turning diameter over bed of 400 mm. It is equipped with a Fagor 8055 CNC control unit and includes a SMW AUTOBLOCK wedge-type chuck and a Multifix quick-change tool holder. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOMAT 200X1000 machine we have for sale. Contact us for further details. Bsdpfx Ajzrvktsbtowt - Description: 2-axis teach-in / cycle-controlled CNC lathe with Fagor 8055 CNC control- Control Unit: Fagor 8055 (CPU 8055/AB-T, AXES 8055, I/O 8055)- Distance between centers: 1000 mm - Center height (distance above centers): 200 mm - Max swing over bed: Ø 400 mm- Turning length: 1,000 mm- Maximum turning diameter over slide: 220 mm- Travel range, Z-axis: 1,000 mm- X-axis travel: 220 mm- Turning tool cross-section: 20x20 / 25x25 mm- Spindle thread: Camlock 5- Internal taper: 1:20- Spindle bore: ø51.6 mm- Spindle speed: 0–3000 rpm, continuously variable- AC Motor Drive: 18.5 / 8.3 kW- Tailstock Quill Diameter: 52 mm / MK4- Tailstock Quill stroke: 145 mm- Power supply: 400 V / 3-phase / PE- Rated power: 10 kVA- Included Equipment / Accessories:- SMW AUTOBLOCK wedge-type chuck (includes several base jaws)- Multifix quick-change tool holder (includes several different tool holders), chuck key- Drill chuck- Rotating center- Safety device fully functional Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage Bwjdpfxezr Hrzj Abtst * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: good (used), Year of construction: 2010, functionality: fully functional, Technical details turning diameter 475 mm turning length 830 mm control HEIDENHAIN MANUALplus 620 swing diameter over slide rest 260 mm centre distance 1000 mm Bwjdpfx Aszr Hdqebtot spindle bore 70 mm spindle turning speed range 1 - 3000 rpm feeds - cross 0,001 - 1000 mm/r feeds - longitudinal 0,001 - 2000 mm/r rapid travel - longitudinal/face 10 / 5 m/min tailstock quill diameter 70 mm tailstock quill stroke 120 mm tailstock quill taper MT 5 main drive (40 % ED) 25 kW weight of the machine ca. 2,9 t * Control HEIDENHAIN MANUALplus 620 * DXF conversion software (processing of contours in DXF format from CAD drawings) * Ethernet and USB interfaces inside the control cabinet * Coolant system (frequency-controlled), 1–4 bar * Glass scale for direct position measurement on the X and Z axes * 4-position PARAT quick-change tool holder, size 2, with several inserts * 3-jaw-chuck RÖHM ZS 200 * Roller guide for easier movement of the tailstock * 2 movable safety doors * Main motor fan control, temperature-controlled, for particularly quiet environments such as laboratory workshops and schools

Condition: used, Year of construction: 2000, centre height 280 mm centre distance 1200 mm turning diameter over bed 570 mm turning diameter over slide 365 mm turning length 1000 mm spindle taper DIN 55027 Gr. 8 control Sinumerik 810 D SIEMENS bed width 360 mm spindle bore 62 mm turning speed range 3 - 2500 U/min feed: 5000 mm / min rapid travel - longitudinal/face 10 m/min 3-jaw-chuck diameter 250 mm quick change toolholder SANDVIK Coromant Capto Bodox E Dn Aopfx Abtewt drive capacity - spindle motor 25 kW taper in tailstock-quill MK 5 dia. of quill 100 mm quill stroke 190 mm voltage 400 V weight of the machine ca. 5,0 t dimensions of the machine ca. 3,55 x 2,20 x 1,95 m - Serial No.: 2022-3742-03 - CNC-Control SIEMENS Sinumerik 810 D - Rapid feed - Coolant equipment - Machine lamp

Condition: excellent (used), Year of construction: 2010, Spinner Tc400 52mc CNC turning machine Year of manufacture: 2010 Control system: Siemens 840D SolutionLine Turning length: 550 mm Turning diameter: 280 mm Bjdpfx Abezua Etjtowt Spindle speed (max.): 5,000 rpm Travel in X-axis: 200 mm Travel in Z-axis: 515 mm Rapid traverse rate X-axis: 15 m/min Rapid traverse rate Z-axis: 24 m/min Overall height: 1,800 mm Overall length: 2,100 mm Overall width: 1,350 mm Quill travel: 500 mm Quill diameter: 60 mm Quill stroke: 125 mm Total weight: 4,000 kg Chuck outer diameter: 225 mm Equipment: Chip conveyor Automatic door

Condition: excellent (used), Year of construction: 2011, Travel X 620 mm Travel Y 420 mm Bedpfjwnbrdjx Abtswt Travel Z 400 mm Table size 800 x 400 mm Mounting ISO 40 (DIN 69871A) Distance between table and spindle nose 500 Spindle speeds 4000/8000 rpm Quill stroke: 80 mm Ball screws on all axes Rapid traverse X,Y,Z 5,5,4 (m/min) Power KW 10.5 (13.7) Tool clamping: Hydraulic Dimensions LxWxH 2,000x2,760x2,050 Weight approx. 1900 kg

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm Bwjdpfx Ajvwgpbjbtst - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders

Condition: excellent (used), Year of construction: 2007, 1 used, very well-maintained high-performance cycle lathe with FAGOR 8055 TC-A, 8-position tool turret BARUFFALDI VDI 40, pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, constant cutting speed, 2 steady rests (small + large), and articulated chip conveyor. Manufacturer: MICROTURN, Origin: Taiwan Model: Challenger BNC 26160X Year of manufacture: 2007 Technical data: Center height: 350 mm Distance between centers: 4000 mm Swinging diameter over bed: 690 mm Swinging diameter over cross slide: 450 mm Swinging diameter in the gap: 870 mm Spindle speeds: 0 – 2400 rpm Spindle bore: 82 mm Spindle motor: 15 / 22 kW Machine dimensions + chip conveyor L x W x H: 7350 x 2450 x 2050 mm Machine weight: 6,800 kg Accessories / Special features: • Cycle control FAGOR CNC 8055 TC-A with alphanumeric keyboard o LCD color monitor o Graphical simulation of cycles o 2 electronic handwheels • Pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, Ø 315 mm • 8-position tool turret BARUFFALDI TB 160-8/12, VDI 40 • Articulated chip conveyor • 2 fixed steady rests (1 x small, 1 x large) • Automatic lubrication of the headstock • Automatic lubrication of the longitudinal and cross slides • Tailstock with hydraulically actuated quill • Coolant system • CE compliant New servo controller FAGOR for the main spindle, repair costs: €4,950.00 net Bwedpfezfqdnjx Abtjt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, x-travel 300 mm y-travel 300 mm z-travel 400 mm Control Dialog 11 turning speed range - main spindle 40 - 4000 min/-1 tool taper SK 40 swivellable +/- 90 ° quill stroke 80 mm In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Accessories: - Cabin Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional Bwsdpfezq Hlfjx Abtjt information. Changes and errors in the technical data and information as well as prior sale reserved!

Year of construction: 2000, condition: used, X-axis: 1000/1245mm, Y-axis: 630mm, Z-axis: 550mm, angle table: 1200x630mm, quill stroke: 75mm, tool holder: SK40, drive power: 7.5kW, spindle speed (continuously variable): 20-7,000/min, feeds: 1-20,000mm/min, rapid traverse: 20,000mm/min, connected load: 14kW, rated current: 24A, control: HEIDENHAIN TNC 426 with hand-held control unit, total connected load: 17kVA, weight: 6t, operating hours, machine on: 122,355h, control on: 18,579h, program run: 36,747h, with Knoll 400 K-1 scraper belt conveyor. Equipment: manually swivelling vertical milling head, protective enclosure with viewing window, coolant system, chip conveyor, HEIDENHAIN 3D touch probe TS 642. An on-site inspection is possible. Bwjdpszvv I Tsfx Abtet

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Deckel FP1 milling machine with Heidenhain digital control in very good condition. Bwedpfozr Hdwsx Abtot Technical specifications: * Speed: 40 - 2000 rpm * Feed rate, continuously variable in 3 axes * Rapid traverse in 3 axes * Spindle brake * Table travel X/Y/Z: 300/160/340 mm * Vertical quill * Clamping system SK40/M16 * Weight approx. 800 kg Accessories and equipment: 3-axis Heidenhain digital read-out Coolant system Operating manual, spare parts list

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, input voltage: 400 V, Deckel FP4M Universal Milling Machine in excellent technical and optical condition. Machine no. 2203-1389 Year of construction: 1984. Technical specifications: - Working travel X/Y/Z: 500/400/400 mm - Spindle speed range: 50 - 2500 RPM - Power: 3.7 / 4.4 KW - Spindle brake - Automatic feed: X-Y-Z, continuously adjustable, 6.3 / 630 mm/min - Rapid traverse X-Y-Z: 1300 mm/min - Fixed angle table - Vertical quill with 90 mm stroke - Tool holder: ISO 40/M16 - Weight approx. 1500 kg Machine options: - 3-axis digital readout Heidenhain Bwodpfx Abeytb Uhotet - Coolant system - Chip tray - Central lubrication - Automatic pulse lubrication on the milling head - Machine manuals with spare parts list and electrical diagrams - Cabinet with accessories, see photos

Condition: good (used), Year of construction: 1974, functionality: fully functional, * 3-axis digital readout (Heidenhain) * Adjustable vertical milling head with quill adjustment * Additional horizontal spindle * REPAR 2 safety device * Machine light * Anti-vibration mounts x-travel 500 mm Bsdpfx Abjzrm Snjtowt y-travel 300 mm z-travel 380 mm table surface area 800 x 420 mm table load capacity 400 kg tool taper ISO 40 spindle turning speed range 40 - 2000 rpm feeds longditudinal/cross/vertical 10 - 500 mm/min rapid traverse 1500 mm/min main drive 3 kW weight of the machine approx. 1,3 t Transport dimensions: The machine is loaded onto a heavy-duty pallet; Dimensions: 1800 x 1100 x 2100 mm (length x width x height)

Condition: like new (used), Year of construction: 2013, For sale is a Leadwell lathe LTC-25 iM -Control Siemens Sinumerik 828D -Operating hours approx. 1000h "rather less" -connected load approx. 23 KW weight approx. 6.7t -Turning diameter max. 310mm turning length 1,000 rpm range 35-3,500 rpm -Bar passage D 77mm -VDI drum turret (VDI 40 with driven tools) -Speed ​​range 3000 rpm, number of tools 12 pieces -Tool measurement via Renishow probe manually stretchable -Programmable tailstock with M functions/ additional foot switch for quill movement -Coolant system 4 bar -Adjustable clamping pressure of the chuck -Hainbuch quick-change system, centroteX/ capteX on collet small/collet large/jaw chuck D250mm Various collets "see pictures" can also be purchased -Preparation for attachment of a bar feeder -Preparation for collecting device for workpieces Bwodpfx Ajh Aw Rkobtet -Set-up dimensions approx. 5000 mm x 2300 mm x 2000 mm -Hinged belt chip conveyor -Training documents and machine documents as well as other documents from attachments are available. -Machine is under power and is still in use -Delivery time Immediately -Many tool holders, turning tools, drills and tables can be purchased at an additional cost. see pictures

Condition: used, Year of construction: 2000, functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 200 mm, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and Travel Ranges Tool holder: SK 40 Table dimensions: mm 4000 x 800 Number of T-slots: 6 Bwodpfx Abey Ttrtetjt T-slot spacing: mm 140 Distance: - Spindle bottom edge: min. mm 140 - Table top edge: max. mm 740 Boring radius: - min. mm 540 - max. mm 1590 Travel range U-axis: mm 2600 Travel range Y-axis: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Data Drilling performance in solid material: - St 60: mm 40 - GG 22: mm 50 Thread cutting: - St 60: M 36 - GG 22: M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque: Nm max. 250 Constant from: min-1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min 7.5 / 3 Feed rates, infinitely variable: mm/min 5 - 2000 Feed force: N 12000 Accuracy Positional accuracy X, Y axis at 1200 mm: mm ± 0.075 Repeatability X, Y axis: mm ± 0.03 Positional accuracy Z axis: mm ± 0.05 Repeatability Z axis: mm ± 0.03 Positional accuracy W axis: mm ± 0.05 Repeatability W axis: mm ± 0.03 Electrical data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen, backlit, easily readable from all sides Position data: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining cycles: Cycles for centering, drilling, threading, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible in each cycle Chip breaking / chip removal: possible in drilling cycle Drilling patterns: Hole pattern, hole circle, matrix Basic software: Programming in dialog mode, 38 zero-point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - aligning cast and sintered parts - Angle detection for round parts by probing the reference edges or surfaces Data interfaces Paint finish with signs of use Standard paint finish, two-component textured paint Machine upper part: light grey RAL 7035 Machine lower part: light blue RAL 5012 Documentation Operating and programming manual Electrical wiring diagram Spare parts drawings Test report for mechanics, electrical system and safety devices

Condition: used, Year of construction: 2007, greates pass round over bed 650 mm Swing dia. over traverse guideway 420 mm Distance between centres 2.000 mm control Sinumerik Siemens slide travel X-axis 440 mm slide travel Z-axis 2.000 mm turning speed range - main spindle 1 - 3.000 min/-1 power capacity - main spindel 33 / 27 / 22 kW transmission ratio 2 spindle diameter in front bearing 140 mm spindle bore 106 mm standard chuck diameter 250 - 400 mm spindle head DIN 55026 / A8 turret head 12 pos. turning tool - shaft cross cut 32 x 32 mm rapid traverse X: 5 m/min rapid traverse Z: 10 m/min feed range X: 0,001 - 1.000 mm/min feed range Z: 0,001 - 2.000 mm/min power feed coss 9.000 N power feed longitudinal 12.000 N diameter of quill 100 mm quill travel 200 mm taper of center MK 6 total power requirement 38 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 6,0 x 2,5 x 2,0 m CNC - Lathe DMT KERN - CD 650 / 2000 - only 3,446 operating hours Bedpszp Rvlofx Abtswt - incl. boring bar with holder for cross slide - incl. face plate 600 mm - incl. traveling steady rest max. 160 mm - incl. fixed steady rest max. 160 mm - incl. fixed steady rest max. 250 mm (not pictured) - incl. fixed steady rest max. 350 mm (not pictured) - incl. spare parts package - NO additional tools included

Condition: used, Year of construction: 1980, machine/vehicle number: 17209, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, spindle mount: MK 3, height adjustment type: mechanical, rotational speed (max.): 1,750 rpm, rotational speed (min.): 130 rpm, total height: 2,000 mm, throat depth: 290 mm, Equipment: rotational speed infinitely variable, Used column drill press Manufacturer: Alzmetall Type: AB 3 ESV Machine number: 17209 Year of manufacture: 1980 Drilling capacity in cast iron: Ø 35 mm Drilling capacity in steel (diameter): 28 mm Spindle speed via 2 gear stages, 2 motor speeds, and continuously variable via a variator gear 130 - 1750 rpm Spindle taper: MK 3 Feed rate: 0.1; 0.2; 0.3 manually/automatically mm/rev Distance spindle/table min/max: 80 - 680 mm Table clamping surface: 500 x 370 mm Table rotatable: 360° Drill table adjustment: 600 vertical mm Overhang: 290 mm Quill stroke: 165 mm Column diameter: Ø 120 mm Equipment: - Coolant system - Speed indicator - Work light - Röhm Spiro quick-change chuck 1-13 mm Bwsdpfx Abozldquotjt - Ejector on chain - Emergency stop button Machine weight approx.: 285 kg Machine dimensions approx.: 0.9 x 0.6 x 1.9 m (LxWxH)

Condition: used, machine/vehicle number: 5961, functionality: fully functional, power: 1.3 kW (1.77 HP), input voltage: 400 V, height adjustment type: mechanical, rotational speed (max.): 2,250 rpm, rotational speed (min.): 80 rpm, total width: 600 mm, total length: 1,000 mm, total height: 1,800 mm, throat depth: 293 mm, table width: 420 mm, table length: 300 mm, overall weight: 280 kg, Equipment: rotational speed infinitely variable, ALZMETALL AX 3 SV Pillar Drill Technical data / Features: Bodpfxozi A Nks Abtswt Manufacturer: ALZMETALL Type: AX 3 SV Serial number: 5961 Spindle taper: MK 3 Spindle travel: 120 mm Overhang: 293 mm Table size: 420 x 300 mm Column diameter: 110 mm Continuously variable speed control 80 - 2250 rpm (in 2 gear stages + 2 motor stages) Automatic quill feed: 0.1 / 0.2 mm/rev Electrically monitored spindle guard Emergency stop button Quick-change drill chuck Weight: approx. 280 kg Space requirement: 1000 x 600 x 1800 mm (L x W x H) Technical data subject to change without notice.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Universal milling machine EMCO FB-4 with 3-axis digital display Heidenhain, in very good condition. Technical data: Bwedpfezq Efqox Abtot >> Year of manufacture: 1997 >> Fixed angular table (clamping area 800 x 400 mm) >> Speed: 18 speed stages from 63 - 3150 rpm >> Mechanical feed: 18 stages Feed rate X and Y: 16-800 mm/min Feed rate Z: 8-400 mm/min Rapid traverse X and Y: 2400 mm/min Rapid traverse Z: 1200 mm/min >> Travels X/Y/Z: 450/300/350 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill, extendable 100 mm >> Tool holder: SK40 >> Weight approx. 1500 kg >> Machine dimensions L x W x H: 1485 x 1475 x 1680 mm >> Motor brake >> Connection value: 4 kVA Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Chip tray, machine feet >> Operating manual, spare parts list About the machine: Offered is a universal milling machine EMCO FB-4 in very good condition. The EMCO runs very smoothly, even at high speeds. The vertical milling head is fastened with four screws and can be easily swung to the side using the articulated arm visible on the left side of the machine. Feed and rapid traverse in each axis. The Emco comes from a training workshop and has been used very little. Take advantage of the opportunity to inspect and test the machine on-site while it is powered up.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Kunzmann WF7/3 tool milling machine with Heidenhain TNC 124 control – in SUPER condition, CE compliant!! Technical data: >> Year of manufacture 2007, machine no. 370648 >> Swiveling and tilting table 6 mounting slots Slot width 14 H7 Slot spacing 63 mm Bwodpfxozq Edmj Abtjt Maximum load 300 kg >> Spindle speeds S I 1 – 1125 min-1 Spindle speeds S II 1126 – 4500 min-1 >> Feed rate (potentiometer 100%) longitudinal and transverse 0 – 2000 mm/min Rapid traverse longitudinal and transverse 5000 mm/min Feed rate vertical 0 – 2000 mm/min Rapid traverse vertical 4000 mm/min >> Travel distances X/Y/Z: 600/400/400 mm >> Vertical and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor: 7.5 kW Accessories and equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Coolant system About the machine: We offer a Kunzmann WF7/3 tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in very good condition. A special feature of this machine is the 4th axis and a digital display for the quill. It comes from a company belonging to an automotive manufacturer, where it was used primarily for training purposes. It has a very user-friendly control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Switching from vertical to horizontal is very easy by folding down the vertical head. The guides are lubricated regularly by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Kunzmann on site while it is powered up.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 50 mm, spindle mount: MK 5, drilling depth: 250 mm, height adjustment type: mechanical, actuation type: electric, rotational speed (max.): 1,400 rpm, rotational speed (min.): 31 rpm, total width: 800 mm, total length: 1,100 mm, total height: 2,400 mm, throat depth: 335 mm, table width: 480 mm, table length: 560 mm, overall weight: 1,270 kg, Equipment: CE marking, documentation/manual, Special Offer – 5% Discount Available! Column Drilling Machine MTP Z5150B – New The MTP Z5150B Column Drilling Machine is a professional industrial machine designed for drilling, reaming, countersinking and tapping operations in steel, cast iron, aluminum, brass, bronze and engineering plastics. Its heavy-duty cast iron construction and machine weight of 1270 kg provide outstanding rigidity, stability and machining accuracy, even when using large-diameter tools. Equipped with a 12-speed mechanical gearbox, automatic spindle feeds and a tapping function, the machine allows the operator to select the ideal cutting parameters for different materials and machining operations. The integrated coolant system further improves machining efficiency and tool life. With a spindle speed range of 31.5–1400 rpm, the MTP Z5150B is suitable for both heavy-duty drilling and precision machining. The large T-slot worktable ensures secure workpiece clamping, while the rigid column construction minimizes vibration for accurate and reliable results. Main Features * Heavy-duty cast iron construction * 12-speed mechanical gearbox * Automatic spindle feeds * Tapping function * Integrated coolant system * Adjustable worktable * High machining accuracy * CE certified Standard Equipment * Mechanical gearbox * Automatic spindle feeds * Tapping function * Integrated coolant system * Adjustable worktable * Safety guard * Emergency stop * Technical documentation * CE Declaration of Conformity Technical Specifications * Model: MTP Z5150B * Machine type: Column drilling machine * Maximum drilling capacity: 50 mm * Spindle taper: MT5 * Quill travel: 250 mm * Motor power: 3 kW * Power supply: 400 V / 50 Hz / 3-phase * Spindle speed: 31.5–1400 rpm * Number of spindle speeds: 12 * Automatic feed: 0.056–1.80 mm/rev * Throat depth: 335 mm * Table size: 560 × 480 mm * Machine weight: 1270 kg * Condition: New * CE certified Applications * Drilling * Reaming * Countersinking * Tapping * Metal fabrication * Tool rooms * Maintenance workshops * Manufacturing plants Suitable Materials * Structural steel * Tool steel * Cast iron * Aluminum * Brass * Bronze * Engineering plastics Transport and Delivery The machine is available from stock and ready for immediate dispatch. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts, and comprehensive after-sales support. Bwedpfjzcn A Dox Abtst Contact us today for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: new, Year of construction: 2026, CORMAK 660 × 2000 Universal Lathe The CORMAK 660 × 2000 Universal Lathe is a heavy-duty industrial conventional lathe designed for precision metalworking in manufacturing environments. Its robust construction, featuring a massive hardened bed and a powerful 7.5 kW spindle drive, ensures excellent machining stability, dimensional accuracy, and long service life, even under intensive production conditions. Key Features of the CORMAK 660 × 2000 Universal Lathe Electromagnetic foot brake ensures maximum operator safety while significantly reducing downtime by allowing fast and reliable machine stopping. Rapid longitudinal and cross feeds considerably reduce tool travel time, increasing machining efficiency and operator productivity. Versatile machining capabilities including external and internal turning, taper turning, thread cutting (metric, imperial, module, and DP), drilling, broaching, and polishing. Hardened and precision-ground 350 mm cast iron bed provides outstanding vibration damping and high machining accuracy. Large Ø105 mm spindle bore with D1-8 spindle nose allows machining of large-diameter shafts and workpieces. High-performance spindle drive with 7.5/9 kW motor delivers reliable power for demanding cutting operations. Wide thread-cutting range without changing change gears, saving setup time and improving production flexibility. 3-axis Digital Readout (DRO) enhances positioning accuracy and provides better control over the machining process. The machine body is manufactured from high-quality cast iron, providing a substantial machine weight of approximately 3,190 kg, ensuring excellent vibration absorption. The headstock is equipped with a reinforced bearing system for smooth and stable operation throughout the spindle speed range of 25–1500 rpm. A centralized feed gearbox, leadscrew, and feed rod enable precise thread cutting as well as automatic longitudinal and cross feeds. Standard Equipment 3-axis Digital Readout (DRO) 315 mm 3-jaw chuck 400 mm 4-jaw chuck 400 mm faceplate Fixed steady rest Follow rest Coolant system Machine work light Operating manual (Polish/English) CE Declaration of Conformity Technical Specifications Parameter Value Swing over bed Ø660 mm Swing over cross slide Ø455 mm Swing in gap (diameter × width) 885 × 170 mm Centre height 330 mm Distance between centres 2000 mm Bed width 350 mm Maximum tool shank size 25 × 25 mm Cross slide travel 355 mm Compound slide travel 130 mm Spindle bore Ø105 mm Spindle nose D1-8 Spindle taper Ø113 mm (1:20) Number of spindle speeds 12 Spindle speed range 25–1500 rpm Leadscrew diameter × pitch Ø40 × 6 mm Imperial thread range 2–112 TPI (60 selections) Metric thread range 0.2–14 mm (47 selections) Diametral Pitch (DP) threads 4–112 DP (50 selections) Module threads 0.1–7 Module (39 selections) Longitudinal feed range 0.059–1.646 mm/rev (35 selections) Cross feed range 0.020–0.573 mm/rev (35 selections) Tailstock quill travel 180 mm Tailstock quill diameter Ø75 mm Tailstock taper Morse Taper No. 5 (MT5) Main spindle motor 7.5 kW (10 HP), 3-phase Coolant pump motor 0.1 kW (1/8 HP) Installation dimensions (L × W × H) 334 × 115 × 151 cm Packing dimensions (L × W × H) 340 × 115 × 182 cm Machine weight 3200 kg Bjdpoyk Dabsfx Abtewt