Used Punching Rotor for sale (2,795)

Year of construction: 1987, condition: excellent (used), functionality: fully functional, 1987 Finzer ZUB 250 Multislide Punching & Forming Machine Used 1987 Finzer ZUB 250 multislide machine for sale. 250kN press unit, 6 forming slides, manual decoiler and 250mm feed. Very good condition. Manufacturer: Finzer Model: ZUB 250 Machine Type: Multislide Punching & Forming Machine Year: 1987 Condition: Very Good Machine Description The Finzer ZUB 250 is a heavy-duty mechanical multislide stamping, punching and forming machine designed for the high-volume production of complex components from strip and wire. This machine is equipped with a 250kN / 25-tonne press unit, a set of six forming slides and a manual decoiler, providing a versatile production system capable of combining punching, blanking, bending and forming operations within one production cycle. Multislide technology is particularly effective for components requiring several bends or forming operations from different directions. Compared with conventional single-slide power presses, the multiple independently arranged forming slides allow complex parts to be produced efficiently with reduced secondary operations. Main Specifications Manufacturer: Finzer Model: ZUB 250 Year: 1987 Machine Type: Multislide Punching & Forming Machine / Stamping & Bending Machine Press Capacity: Approx. 250kN / 25 tonnes Number of Forming Slides: 6 Maximum Feed Length: Approx. 250mm Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Forming Slide Capacity: Approx. 30kN per slide Forming Slide Stroke: Approx. 0–50mm Maximum Production Speed: Up to approx. 400 strokes/minute, depending on tooling, component and material Machine Weight: Approx. 4,000kg 250kN / 25 Ton Press Unit The machine incorporates an approximately: 250kN / 25-tonne press station The press operation can then be combined with movements from the surrounding forming slides to produce complex finished components in a continuous cycle. Six Forming Slides This Finzer is supplied with a complete set of six forming slides. The multiple-slide arrangement is one of the main advantages of the ZUB system, allowing tooling to approach the component from several directions during the same production cycle. Forming capacity per slide: 30kN Slide stroke: Adjustable up to approximately 50mm The slides can be tooled for sequential bending, forming and positioning operations. Manual Decoiler Included The machine is supplied with a manual decoiler for coil-fed production. Coil & Strip Feed Capability Comparable Finzer ZUB250 machines are specified with: Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Maximum Feed Length: Approx. 250mm Feed length is typically adjustable to suit the individual component and tooling setup. High-Speed Production Depending on component design and tooling, period ZUB250 specifications quote operating speeds of approximately: 25–400 strokes per minute This makes the Finzer particularly suitable for repetitive, high-volume manufacture where several conventional press and forming operations might otherwise be required. Mechanical Cam-Controlled Multislide System The Finzer ZUB series uses a mechanically controlled cam-driven forming system. Hnedpez S T Insfx Akrju Cam-controlled multislide machines are particularly effective for repeat production because the motions of the forming tools can be precisely coordinated with the press and material feed.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: A/18031, SCHULER - MSP2-800- 4,5x1,8-400 Kapasite: 800 ton Hava Tüketimi: 30 m³/saat Güç: 296 kW Üst Tabla Ebatları: 4500 mm x 1700 mm Alt Tabla Ebatları: 4500 mm x 1800 mm Pres Yükseklik: 7,5 m Pres En: 6,50 m Pres Genişlik: 4,50 m Dakikadaki Vuruş Sayısı(maksimum): 70 spm Çalışma Reglajı: 300 Kurs Değeri: 80-360 Used machine Hnodjzxqz Tspfx Akrju

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 11,800 h, laser power: 3,200 W, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, No minimum price – guaranteed sale to the highest bidder! Includes SheetMaster, ToolMaster, GripMaster! TECHNICAL DETAILS Laser power: 3,200 W Laser type: CO₂ laser TruFlow 3200 Combined punching/laser working area: 3,000 × 1,500 mm Punching mode working area: 3,000 × 1,500 mm Laser mode working area: 3,000 × 1,500 mm Max. sheet thickness, structural steel: max. 8 mm Max. sheet thickness, stainless steel: max. 8 mm Max. sheet thickness, aluminum: max. 4 mm Max. punching force: max. 220 kN Max. punching stroke rate at E = 1 mm: max. 900/min Max. marking stroke rate: max. approx. 2,800/min Max. number of multi-tools with 3 clamping units: max. 18 Tool capacity: 180 tools Max. axis speed X/Y simultaneously: max. 108 m/min MACHINE DETAILS Operating hours: 11,800 h Laser on time: 42,100 h EQUIPMENT SheetMaster ToolMaster Hnedpfxez Izu Ts Akrou GripMaster Large-format working area without repositioning Linear magazine with multi-tools SheetMaster with two large-format tables Automatic scrap sheet removal to lifting table

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Control: Bosch Type 3 Basic Standard equipment: - Robust C-frame - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 - 3.5" floppy disk drive Hnjdpsz Rl T Tsfx Akrou - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post

Condition: good (used), Year of construction: 2006, operating hours: 47,962 h, functionality: fully functional, type of input current: three-phase, overall weight: 18,000 kg, input current: 40 A, input frequency: 55 Hz, input voltage: 380 V, Equipment: safety light barrier, We are selling: Hnsdez R Atqepfx Akreu a well-maintained Amada punching and nibbling machine, used only for thin sheet metal applications. Maintenance was performed by AMADA. Without tooling. The machine is being sold due to a new investment. The buyer must dismantle and collect the machine in DE-84051 Mettenbach. The machine can be inspected in operational condition in DE-84051 Mettenbach by appointment. Sale only to commercial customers and with the exclusion of any warranty!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 30282, control type: manual, punching force: 40 t, punching diameter: 32 mm, stroke rate (min.): 25 1/min, sheet thickness (max.): 10 mm, oil tank capacity: 50 l, overall weight: 1,400 kg, Equipment: CE marking, emergency stop, foot remote control, FICEP 401 Serial number 30282 Year of manufacture 2008 Ficep hydraulic single-punching machine Model 401 Punching force 40 tons / 400 kN Maximum standard thickness 10 mm (steel) Punching diameter 32 mm Maximum diameter for material thickness 32 mm x 10 mm Throat 510 mm Hodpfxjz N Al Do Akrjnu Maximum punching speed (strokes per minute) 25 spm Maximum punching stroke 40 mm Oil tank capacity 50 liters Working height 950 mm Dimensions: L 695 mm x W 1410 mm x H 1610 mm Motor power 4 kW / 5.5 HP Machine weight 1.4 tons Safety systems The machine complies with CE directives Includes a selection of new punch and die sets for round holes.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, 1 unit of Flexor 380 2C, used, factory-reconditioned Machine speed max. 300 m/min Web width max. 380 mm Web width min. 190 mm Unwind diameter max. 800 mm Unwind shaft, pneumatic, D 76 mm Punching unit with re-register – 2 units Punching width max. 380 mm Magnetic cylinder, circumference min. 10” (80T) Magnetic cylinder, circumference max. 24” (192T) Matrix strip unwinding, max. D 600 mm Slitting unit with 7 blade holders 1 Rewinder, max. D 550 mm Spindle, D 76 mm Year of manufacture 2015 Hjdpfx Aez Sriqskrenu Accessories (optional): Used magnetic cylinders: 80, 87, 92, 94, 95, 98, 96, 100, 102, 104, 106, 112, 116, 120, 132, 136, 138

Condition: good (used), Year of construction: 2019, Schuler BEUTLER press Type: MC 4000 Year of manufacture: 2017 Pressing force: 4,000 kN Hnodpfx Akez Szrherou Stroke rate: 20-80 strokes/min Stroke adjustment: 40-315 mm Ram adjustment: 200 mm Installed height: 750 mm Table area: 3,000 x 1,400 mm Ram area: 3,000 x 1,300 mm Press weight: 72,000 kg including GSW Schwabe strip feed line Strip width: 80 - 500 mm Strip thickness: 0.8 - 4.0 mm Coil capacity: 5,000 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, punching force: 22 t, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, sheet thickness (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Punching force: 220 kN Sheet metal thickness: 8 mm Sheet metal thickness for stainless steel: 4–6 mm Working area: 2,535 × 1,280 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Number of stations: 18 Number of clamping jaws: 3 Number of tool cassettes: 4 pcs Part chute for parts up to: 500 × 500 mm MACHINE DETAILS TFT color screen: 10.4" Floppy disk drive: 3.5" EQUIPMENT Rotatable tool holder Automatic repositioning system with pressure plate Automatic tool changer with 18 stations 3 clamping jaws Programmable part chute for parts up to 500 × 500 mm Programmable pressure plate with pre-selectable clamping force Hodpfxjz Izque Akronu Good parts container Tool spray lubrication 2nd lubricant tank Punch scrap extraction Chip bin Quick shut-off for hydraulics Order table TFT color screen 10.4" 3.5" floppy disk drive Graphic programming ToPs 2000 RJ45 network connection 2-beam safety light curtain Network connection including installation Multitool control Repositioning cylinder 4 tool cassettes

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting Hodpfx Aez Rl Hyskronu - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: used, Year of construction: 2001, machine/vehicle number: 11572, functionality: limited functionality, operating hours: 47,262 h, overall weight: 1,950 kg, The BTSA 180 is a Bruderer high-speed precision stamping press with a nominal force of 180 kN (18 tons). It is designed for continuous production with progressive dies and variable stroke rates from 100 to 1300 strokes per minute. The press is equipped with a Bruderer BZV 60 strip feeder, which processes strip widths up to 60 mm and material thicknesses up to 2 mm. The stroke is adjustable between 8 and 40 mm, and the strip feed height is adjustable between 50 and 100 mm to accommodate different tools and material profiles. In addition, a Bruderer U control system from Siemens is installed. Hnedpfx Akjz H H Dqorou The machine is partially functional: The buttons responsible for the two-hand control system respond with a delay or not at all in setup mode during material threading, which makes material threading time-consuming. The machine's spring dampers are worn, causing the machine to vibrate significantly during continuous operation. The rubber mounts for the dies are brittle and breaking off. The UVV inspection for 2025 has been carried out, as well as the annual maintenance for 2025. Nominal force: 180 kN (18 tons) Stroke rate: 100-1300 strokes per minute (variable) Strip feed: Bruderer BZA 60 Adjustable stroke: 8-40 mm Main drive: 16 kVA Power supply: 400 V / 50 Hz Table area: 300x400 mm Strip feed height (adjustable): 50-100 mm Max. strip width: 60 mm Max. material thickness: 2 mm Machine dimensions: approx. 1300x1000x2300 mm Weight: 1950 kg Operating hours: approx. 47262 The machine is currently not running but is still connected so that it can be used in an emergency for production. Dismantling and removal are planned for the end of December, as a crane will already be on site by then to load the machine.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 255100, punching force: 20 t, total height: 2,150 mm, total width: 2,900 mm, total length: 4,900 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, working range: 1,270 mm, type of input current: three-phase, travel distance X-axis: 1,270 mm, travel distance Y-axis: 1,270 mm, workpiece weight (max.): 75 kg, overall weight: 11,000 kg, input current: 40 A, input frequency: 50 Hz, table load: 75 kg, feed rate X-axis: 82,000 m/min, feed rate Y-axis: 82,000 m/min, feed rate Z-axis: 82,000 m/min, travel speed (max.): 82,000 mm/min, input voltage: 400 V, AMADA EUROPE 255 CNC Punching Machine CNC turret punching machine AMADA EUROPE 255, year 1999, equipped with a GE Fanuc Series 18i-P CNC control. The machine is installed and available for inspection and demonstration while powered on, by appointment. Technical specifications: Manufacturer: AMADA EUROPE Model: EUROPE 255 Year of manufacture: 1999 CNC control: GE Fanuc Series 18i-P Punching force: 200 kN (20 t) Working range X x Y: 1,270 x 1,270 mm Maximum sheet thickness: 3 mm Table load: 75 kg Turret: 27 stations Maximum positioning speed: 82 m/min Power supply: 400 V / 50 Hz / 3-phase Nominal current: 40 A Installed power: 29 kW Machine dimensions: approx. 4,900 x 2,900 x 2,150 mm Machine weight: approx. 11,000 kg CE marked Hedpfx Aszw Ui Eekronu The machine is currently installed and can be inspected while powered on. Available immediately. Inspection by appointment. Location: Greece

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 070691, control type: CNC control, actuation type: mechanical, punching force: 165 t, punching diameter: 76 mm, sheet thickness (max.): 6 mm, table length: 2,070 mm, table width: 1,280 mm, overall weight: 8,000 kg, power: 14 kW (19.03 HP), input voltage: 220 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, Trumpf Trumatic 200 CNC punching machine (with Multitool) For sale: a Trumpf Trumatic 200 CNC punching machine (internal designation TC 200 R), manufactured in Germany in 1998. Well maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Type: 9095 — Serial number: 070691 Year of manufacture: 1998 Max. punching force: 165 kN Machine weight: 8,000 kg Hjdpjz E Sa Ijfx Akrenu Power supply: 220V / 50Hz — Connected load: 14 kVA — Control voltage: 24V DC Required fuse protection: 3x25A Compressed air connection: 6 bar Comes complete with tooling, cassettes, and Multitool. For reference, the standard specifications for this model are: working area 2,070 x 1,280 mm, max. sheet thickness 6.4 mm, max. punch diameter 76.2 mm, X-axis speed 80 m/min, Y-axis speed 55 m/min. For technical questions or to arrange a visit, please contact us by email. We will be happy to answer any questions and provide further photos or videos of the machine in operation.

Condition: excellent (used), Year of construction: 2018, operating hours: 100 h, functionality: fully functional, rotational speed (min.): 1,490 rpm, input voltage: 400 V, input frequency: 50 Hz, 200 kW electric motor IE4 efficiency class Year of manufacture: 2024 6-month warranty 400 V 1490 rpm Hnjdpfx Aken Tntqerju 315 l

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Hjdpfoz Snchox Akrsnu Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Condition: used, functionality: fully functional, Year of construction: 1989, For sale: TRUMPF MINIMATIC 100 punching machine. Lightly used, in excellent condition, and comes with many tools. The machine is connected and can be tested. We can provide training on how to use the machine; all instructions are available. Specifications: Make: TRUMPF MINIMATIC 100 Made in: Germany Year: 1989 Capacity: 15 T / 150 kN Other: Automatic 9-tool changer Weight: 5T If you have any further questions, please do not hesitate to ask. Hedjy Udrmspfx Akrsnu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, EDEL - Stanzprofi 250 / Punching machine -CE marking -Year of manufacture 1994 -Depth stop approx. 250 mm -Length stop approx. 500 mm -Working area 1000x500 mm -Tool area up to max. 100 mm -Material thickness up to approx. 10 mm -Punching example - diameter 70 mm in 3 mm sheet metal -Punching example - diameter 25 mm in 8 mm sheet metal -Punching sequence / time interval 1 second -Drive power 1.5 kW -Table dimensions approx. 1350x700 mm -Operating pressure 6 bar -F-Max. 250 KN / (25 MP) -Various punching dies -Machine feet Hnedez Dq S Tspfx Akreu -Documentation Dimensions approx. 1.6x2x1.8 meters / Weight approx. 1400 kg Subject to errors and omissions.

Condition: good (used), Year of construction: 1987, machine/vehicle number: 287, Offer 26239 Technical data: Hnjdpfoz R Siiox Akrju - Pressing force: 250 kN - Max. sheet thickness: 10 mm - Max. punch size / punching diameter: 105 mm - Stroke, continuously adjustable: 0 - 40 mm - Overhang: 750 mm - Highest stroke rate: 150 strokes/min - Installation height: 200 mm - Drive: 400 V / 8.2 kVA - Space requirement: approx. W 4200 x H 1700 x D 1700 mm - Weight: approx. 3200 kg - Including: - Stop table, left and right, each with X-axis travel of 2000 mm - Y-axis travel: 500 mm - Quick-change tool system for punches - Foot pedal; emergency stop button - Extensive range of accessories, various tool holders - Punches and dies

Year of construction: 1993, condition: used, Empty weight: 9.300 kg Dimensions (LxBxH): 442 x 280 x 195 cm Serial number: 210045 Hedpfx Asz R S Thekrenu Year of manufacture: 1993 Cutting force: 20 metric tons, 200 kN Maximum sheet thickness for punching and nibbling: 6.4 mm Maximum punch diameter: 88.9 mm Working range in the transverse direction (X-axis): 1,270 / 2,540 mm Working range in the longitudinal direction (Y-axis): 1,000 mm Control system: Fanuc 16P Tool changer: yes Number of tool stations: 19 positions (16 fixed + 3 index) Required power capacity: 23 kVA Turret revolver with 16 + 3 x Auto Index Holders Length: 4,425 mm Width: 2800 mm Height: 1950 mm Weight: 9300 kg Central lubrication: yes Condition: fully serviced and overhauled Additional loading charges may apply Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Thursday 5 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 3 November Pickup days are on: - Tuesday 10 November - Thursday 12 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), functionality: fully functional, Year of construction: 2007, TRUMPF TruMatic 7000 – 1300 Year of manufacture: 2007 Includes active dies! Includes Sheetmaster and Gripmaster Machine operating hours: 38,797 h Beam on-time: 38,149 h Laser power: approx. 4000 Watts Hjdpfxsz Dumzs Akrenu Max. punching force: 220 kN Working area (laser operation): approx. 2540 x 1280 mm Working area: punching area: approx. 2540 x 1370 mm Control system: Bosch MTX compact Max. sheet thickness: approx. 8 mm Space requirement: approx. 7950 x 6700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 38,149 h, controller model: Bosch MTX compact, laser power: 4,000 W, punching force: 22 t, sheet thickness (max.): 8 mm, Includes SheetMaster & GripMaster! Hjdoz Nn H Hspfx Akrsnu TECHNICAL DETAILS Laser power: approx. 4,000 W Punching force: max. 220 kN Sheet thickness: max. approx. 8 mm Working area, laser operation (X × Y): approx. 2,540 × 1,280 mm Working area, punching operation (X × Y): approx. 2,540 × 1,370 mm MACHINE DETAILS Control system: Bosch MTX compact Dimensions & Weight Footprint (L × W): approx. 7,950 × 6,700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA Operating hours: 38,797 h Beam on-time: 38,149 h EQUIPMENT Active dies SheetMaster GripMaster

Condition: used, functionality: fully functional, Year of construction: 2000, Equipment: foot remote control, Hydraulic punch and shear machine in good condition. Hnedpfxjz S Izpj Akreu

Condition: used, functionality: fully functional, Year of construction: 1994, machine/vehicle number: 070027, control type: CNC control, punching force: 150 t, punching diameter: 76 mm, sheet thickness (max.): 6 mm, overall weight: 8,000 kg, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Trumpf Trumatic 200 CNC punching machine For sale: a Trumpf Trumatic 200 CNC punching machine (internal designation TC 200 R), manufactured in Germany in 1994. Well-maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Type: 9095 — Serial number: 070027 Year of manufacture: 1994 Max. punching force: 150 kN Hnodpfx Ajz E R S Aekrju Machine weight: 8,000 kg Power supply: 380V / 50Hz — Connected load: 14 kVA — Control voltage: 24V DC Required fuse protection: 3x25A Compressed air connection: 6 bar Comes complete with tooling and cassettes. For reference, standard specifications of this model: working area 2,070 x 1,280 mm, max. sheet thickness 6.4 mm, max. punch diameter 76.2 mm, X-axis speed 80 m/min, Y-axis speed 55 m/min. For technical questions or to arrange a visit, please contact us by email – we will be happy to answer any questions or send further photos/videos of the machine in operation.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Hnsdpfszxzagox Akrou Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: used, Year of construction: 2003, MANZONI Transfer Press Type: T6302MR/2/12/TE, Year of manufacture: 2003 Pressing force: 6,300 kN Stroke rate: 10-45 strokes/min Stroke length: 600 mm Ram adjustment: 200 mm Table area: 4,000 x 1,700 mm Installation height: 1,100 mm Hnjdez Szrnepfx Akrju Includes PBK conveyor system.