Used Orbital Riveting Machine for sale (64,717)

Condition: used, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary table with SIEMENS control system Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Riveting spindle speed approx. 1,400 rpm Tool-to-anvil installation height max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the indexing table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke motion - Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch - Modernization of the control system and retrofit with servo drive for the rotary table in 2009 - New electrical control cabinet with Siemens Simatic panel – built in 2009 - Riveting time infinitely programmable - Riveting pressure infinitely adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space required L x W x H 3200 x 1250 x 2400 mm Isdpfx Aedzp T Noizoib Weight approx. 2,500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically rotates to the next working position after each cycle. Ideal for saw blade manufacturers and repair shops. Alternatively suitable as a basis for constructing a special-purpose machine.

Condition: excellent (used), functionality: fully functional, Brother Hi-Spin riveting machine 5mm high spin Type: BR1-103 Iiedpfx Ajwdwv Reizjb - Crimping ability (Mild steel rivet) φ5mm or less - Spinning head: 20-40mm - Distance between tabletop and punch: 60-180mm - Table working surface size: 310 x 180mm - Processing time setting range: 0.3-5 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.2kw 4Pole Machine size Width 390 x depth 510 x height 1000mm Machine weight 95kg

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, input voltage: 220 V, throat depth: 172 mm, type of input current: three-phase, overall weight: 110 kg, operating pressure: 6 bar, input frequency: 50 Hz, power: 0.12 kW (0.16 HP), spindle stroke: 40 mm, table length: 250 mm, table width: 250 mm, Yoshikawa US-66 riveting machine 5mm high spin type: US 66 - Crimping ability (Mild steel rivet) φ5 mm or less - Spinning head: 5-40 mm - Distance between tabletop and punch: 90-285 mm - Table working surface size: 250x250 mm - Processing time setting range: 0.2-9 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5 kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.12kw Machine size Width 330 x depth 610 x height 800mm Machine weight 95 kg Iodpfx Aowd Uf Neizoib If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), functionality: fully functional, Riveting machine with pneumatically controlled 6-station rotary table. Riveting process triggered via foot pedal. Maximum rivet shank diameter for steel rivets: Ø 8 mm. Working stroke adjustable from 5 to 40 mm. Functional video available and can be provided upon request. Very good condition, immediately available! Iijdjyq Nqxepfx Aizjb

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 500 kg, See also the homepage: bdtronic.com/de-de/heissnietanlagen/vollautomatisch-heissnieten/ Isdpsy Nzhbjfx Aizeib Additionally, we offer other similar machines.

Condition: good (used), Year of construction: 1986, machine/vehicle number: 1111, Offer 24093 Technical specifications: - Max. rivet shank diameter: 6 mm - Feed force: 1200 daN - Riveting time adjustment: 0 - 10 sec Iisdpfx Aiey Ibg Ijzob - Throat depth: 140 mm - Table size: 250 x 175 mm - Adjustable installation/table height - Stroke: 40 mm - Operating pressure: 5 bar - Pressure reducer - Drive: 400 V / 0.6 / 0.75 kW - Required space: approx. W 500 x H 1650 x D 650 mm - Weight: approx. 480 kg

Condition: good (used), Year of construction: 2000, machine/vehicle number: 805311, Offer 23281 Technical Data: - Pressing force: 2 t - Riveting time adjustment - Throat depth: 120 mm - Table size: 210 x 200 mm - Installation height: 120 mm - Stroke: 120 mm - Pneumatic connection: 6 bar - Control: SIEMENS Iiodpfxoy Ia Nzj Aizsb - Drive: 400 V / 0.55 kW - Space requirements: approx. W 500 x H 1650 x D 650 mm - Weight: approx. 250 kg

Condition: new, Year of construction: 2025, Pneumatic radial riveting machine RMU-12-C is designed for forming caps in solid steel rivets d=2...12 mm and in tubular steel rivets d=4x1...14x1 mm. This riveting machine can be used for movable and immovable riveted connections. Technical data: 1. Diameter of solid steel rivets - 2...12 mm. Iiedpsfvztuefx Aizsb 2. Diameter of tubular steel rivets - 4...14 mm. 3. Motion of riveting head - 20 mm. 4. Time of unriveting for one rivet - 1...10 sec. 5. Motor power - 0,75 kW. 6. Voltage - 220/380 V 50 Hz. 7. Working pressure - 3...6 Bar. 8. Weight - 100...120 kg.

Condition: used, Year of construction: 2012, pressure 6 bar voltage 24 V weight of the machine ca. 1,75 t length in total 1500 mm length in width 900 mm Total height 2100 mm Riveting machine, automatic riveter by Arnold Shinjo Technical data and specifications are subject to change without notice. Prior sale reserved. Ijdpfox Tu R Rex Aizeib

Year of construction: 2016, condition: used, functionality: fully functional, Radial riveting machine KARDEŞLER Iodsywygxspfx Aizsib

Year of construction: 2019, condition: used, functionality: fully functional, AGME radial riveting machine Iisdpsywydqjfx Aizob

Year of construction: 2019, condition: used, functionality: fully functional, AGME radial riveting machine Iiodoywx Iuopfx Aizsb

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Iedpfx Ast Awm Dsizjib Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: used, Wobble riveting head BODMER KÜSNACHT Type FMK 3 Year of manufacture approx. 1980 rivet shaft diameter: max. 10 mm tool diameter: 12 mm rivet head stroke: 40 mm riveting spindle speed: approx. 1400 rpm motor power: 0,37 kW Mains connection: 380 Volt, 50 Hz - Riveting pressure adjustment infinitely variable via hydraulic pressure - Micrometer stop for stroke limitation - stroke movement via oil hydraulics (max. 45 bar) - machined flange surface Ø 115 mm with fixing nut on housing total length: approx. 800 mm weight: approx. 40 kg good condition The rivet head has a multi spindle head to set 2 or 3 rivets at the same time. This can be dismantled and used normally. Isdpfx Aeglarljizeib For normal use the normal wobble head which holds the tool is missing.

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooler for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding unit POLYSOUDE PS 204 + RC 200 Year of manufacture: 1996 Serial number welding source: 9785153 Serial number cooling unit: 968628 Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Mains connection: 230 volts, 50 Hz, Schuko plug - Note: Display on the power source becomes illegible after some time - Remote control cable type BP 1436 with 7.5 meter connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 118,643 operating hours (read off) - Operating and maintenance manual Space requirement welding machine (L x W x H): 550 x 360 x 500 mm Space requirement cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Iodpfjyhq A Rsx Aizoib Good condition Note: Display on power source becomes illegible after some time Without accessories Price applies to one set consisting of 1x power source and 1x water cooler.

Condition: used, Nietmaschine / Riveting machine Hang 162-01 Baujahr / Year 1993  - SN. 39709 Arbeitstiefe (Ausladung) / Working depth (projection) 620mm Taktzeit / Cycle time 0,7sec Niethub / Rivet stroke 55mm Arbeitshöhe / Working height 1100mm Nietschaftsdurchmesser / Rivet Diameter 2-4mm Antriebsleistung / Drive capacity 0,37 kW Geeignet für Verarbeitung von Halbhohlniete, Vollniete, Hohlniete, Rohrniete, Zweispitzniete, Doppelhohlniete (Zuführung des Nietkäppchens), Nietmaschine für mittlere bis große Serien Iodpfx Aisv D H Htezoib Suitable for processing semi-tubular rivets, solid rivets, hollow rivets, tubular rivets, two-point rivets, double-tubular rivets (feed of the rivet cap), riveting machine for medium to large series Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Manufacturer: Dunkes Type: DN 2 Thrust: 2t Diameter: max: 12mm Table dimensions: 210 x 200 mm Motor power: 0.55 kW Machine weight approx.: 130 kg The dimensions of the machine are approx. Iiedpfevxrzlsx Aizeb 0.40 x 0.50 x 1.00 m

Condition: used, Year of construction: 1995, Technical details: throat: 1000 mm air pressure: 6,0 bar Ijdpsu Ictnofx Aizsib total power requirement: 5,0 kW weight of the machine ca.: 0,4 t dimensions electric cabinet LxWxH: 1,03 x 0,4 x 2,05 m dimension machine xH: 2,6 x 1,0 x 2,3 m AUTOMATIC DRILLING AND RIVETING MACHINE Application: automatic drilling and riveting of sheet metal parts. Features: - Rivet Ø 3.2 - 4.0mm, rivet length 6.0 - 10.0mm; riveting force = 40,000N. - Drilling: Speed up to 5,000 rpm, drilling feed 50 - 1,500 mm/min, stroke height 80mm. - Clamping: clamping force 50 - 400 daN, lower tool 75mm adjustable - Hydraulics: pressure 128 bar, supply 14 l/min, power 4 kW - Pneumatic: pressure 6 bar, supply 9,5 l/sec. - Operation via control panel or/and foot switch. Equipment: - side table - 8 oscillating conveying heads - hydraulic power unit accessories: - Tool cabinet, div. drill countersink, 2 closing heads, hold-down and other div. tools comparable in photo. *

Condition: used, Technical details: shaft length: max. 30 mm capacity: 600 ST/min wire diameter max.: 5 mm working dimensions: 30 mm Iijdpou Nfrcjfx Aizob dimensions electric cabinet LxWxH: 1,45x0,55x2,1 m dimensions of machine: 2,95x1,5x2,15 m dimensions of coil: 1,15x1,15x1,15 m Orbital Cold Forming Machine! - Not not suitable for screw production!!!!! - mechanic cold flow press / machine is unused!!!! - Steel core bullets - Rivets (almost all types: flat rivets, punch rivets, precision rivets, flat head rivets, etc. -----à not for manufacturing semi-hollow rivets, because you will need 2 forming stages, model KEPK - 1 however only has 1 forming stage. - bolts - Pins, chain pins (short) - Lead sheath-weighting for bullets (with straight frames front and rear) - plant like new / never used! accessories: - coil, manual Machine can be demonstrated under power. Please send us your enquiry what you are going to manufacture with that machine. You can also send us a drawing in order to check it if it is possible. *

Condition: excellent (used), functionality: fully functional, 1 Used Haeger 412 Insertion Machine Sheet Metal Inserts Stud & Nut Self Clinching For Sale With tooling and J shape lower tool Iisdpfewbhipex Aizsb

Condition: good (used), Year of construction: 1978, functionality: fully functional, 1 used orbital / riveting machine Iijdpfxewxxw Sj Aizob Brand: STEINEL Model: NR 10 Year of manufacture: approx. 1978 Technical details Table surface: 350 x 250 mm Throat depth: 250 mm Adjustable table: 400 mm Air pressure: up to 10 bar Total connected load: 1.3/1.6 kW Machine weight approx.: 0.45 t Space requirement approx. LxWxH: 0.7 x 0.45 x 1.8 m Details without guarantee

Condition: used, Year of construction: 1988, Type: Riveting machine Manufacturer: ARNO Maskiner AB, Sweden Iodpfx Aioxgpftozeib Model: 1304 Year: 1988 Condition: fully working

Year of construction: 1988, condition: ready for operation (used), I sell the flader orbital brushing machine. Model Quickwood Fladder Working width 1060mm Mechanically adjustable rotation and feeding speed. Iedpfx Aef Rth Toizsib Suitable for rustical brushing and patina surface. Profiles possible. Made in Denmark Hansen - Hundebol AS

Condition: used, Year of construction: 1990, Type/Designation: 307-153/714-750 Serial Number: 82/293 Country of Manufacture: Made in West Germany (before 1990) Technical Data (approximate, for this type of CHIRON machine from the 1970s/80s): Machine Type: Column drill / single-station drilling machine for metal Motor Power: typically from 1.5 kW to 3 kW (three-phase, 380 V) Spindle Speeds: 100 – 4000 rpm (mechanically or electrically switched) Max. Drilling Diameter in Steel: approx. 20–25 mm (depending on the version) Spindle Taper: usually MT2 or MT3 Feed: manual or mechanical (some models equipped with automatic feed) Weight: several hundred kilograms (approx. 300–600 kg) Intended Use: serial production in industry (precise hole drilling, light milling operations in metals, use in production lines) Machine Table: cast iron, capable of securing workpieces Iisdpfsw T U Ubox Aizsb Full control panel – variable speed adjustment available 2. Key Working Head Parameters (important for riveting): Press Force (kN) – if specified on the cylinder label or in the electrical box (often 10–30 kN for this size) Spindle/Slide Stroke (mm) – measure from top to bottom position Daylight (working clearance: distance between tool tip and table at top position) Throat Depth – from spindle axis to column (working reach) Max. Rivet Diameter / Work Range – specify based on tests or prior use Voltage: usually 380/400 V, 50 Hz 3. Dimensions and Logistics: L×W×H (of base/overall, in cm) Electrical Supply: 3×400 V, protection e.g. C16–C20 (indicate according to power rating) Weight (weigh with pallet jack with scale or estimate)

Condition: good (used), Stock number: 2225 Manufacturer: AGME Spain Type: RR14 Year of construction: 2005 Machine number: 3815 Control unit: CU 301 Iiodsrhza Sspfx Aizeb Table: 350 x 300 mm Riveting capacity max.: 14 mm diameter Stroke: 5 to 50 mm adjustable Distance table-head: 60 to 270 mm Air connection: 6 bar Riveting force: 1,880 daN Riveting time: 0 to 5 sec adjustable Projection: 180 mm Equipment: 5-fold riveting head, two-hand operation; Connection: 1.6 kW Dimensions: 500 x 720 x 1,200 mm Weight: 0.3 t Condition: tested, ready for use