Used Recoiler Mandrel for sale (452)

Condition: used, 420 X 4MM BKM SINGLE-PIT HIGH CARBON STEEL SLITTING LINE Manufacturer: BKM (Germany) Line Direction: Right to left Line Speed Range: 0 - 200mpm (656fpm) - continuously adjustable Strip width Range: 15 - 420mm (0.595 - 16.5") Thickness Range: 0.3 - 4mm (0.01181 - 16.5") Material Specifications: Cold Rolled Steel Yield Strength: >750 N/mm² Complete Line with the Following Components: Entry Pit Type Coil Car 6 Ton Max Coil Weight Mandrel Uncoiler 40KW DC drive Coil ID: 500mm (20") Coil OD: 1950mm (77") 6 Ton Max Coil Weight Hydraulic Expansion Hydraulic Pinch Roll Arm Peeler Table NEW 2024 (MGK-Maschinenbau, Germany) Entry Felt Brake, Hydraulic Entry Double Sided Edge Guides, manually adjustable Slitting Head 58KW DC Drive Hydraulic Opening/Closing system Height Adjustment via Electric Spindle Drive 100mm (3.937") Shaft OD Tooling OD Range: 262.00mm - 223.00mm (10.315" - 8.778") Scrap Guiding Rolls at Slitting Head Exit Scrap Winder 1 Set of Deburring Rolls - Driven/Non-Driven Pit after Deburring Rolls - 3m deep Tension Stand with Entry Roller Table, Driven Deflector Roll, Pneumatic Felt Brake and Hydraulic Crop Shear Recoiler 75KW DC Drive 5.5 Ton Max Coil Weight 400 + 500mm Mandrels (15.748" - 19.685") Max. Coil OD: 1550mm (61.023") Over Arm Separator Full Hydraulic Drum Push Off Plate Exit 2-Arm Turnstyle Type Coil Car 5.5 Ton Max Coil Weight Rcjdpfx Aiszad Tysrsh Machine Installed and under power!!! Complete Line with Hydraulics, Electrics , Controls, Drawings, Tools

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 3 - D Bending with fully automatic process controlled by NC Maximum pipe diameter: 50 mm Includes 3 bending dies: 26.9 mm, 33.7 mm, 42.4 mm Rodpfx Aisz Dntusroch Used very little, therefore in very good condition.

Condition: used, Year of construction: 1988, gebraucht 1988 090151 prompt, Zwischenverkauf v Italien 12800 € 1 Rodpfxjxx A Eko Airsch 42 mm 4665 mm 800 mm 1160 mm 1470 kg 42 x 2,5 mm 40 x 1,2 mm 30 x 40 x 1,7 mm 40 x 30 x 1,3 mm 255 mm 22 mm 180 ° 90 °/s 5.5 kW 120 l Capacity specifications refer to 400 N/mm² Maximum bending radius with pipe guide rollers: 255 mm Maximum bending radius with pipe guide slide: 175 mm Minimum bending angle: 4° Maximum usable length without positioning device: 3900 mm Maximum usable length with positioning device: 3370 mm Adjustable mandrel extension travel from 8 mm Opening and closing travel of the counter-clamping jaws: 0-45 mm Opening and closing travel of the rollers or slides: 12-22-42 mm Operating manual in German Machine does not comply with AMVO or UVV regulations Tools not included BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: good (used), functionality: fully functional, Year of construction: 2009, Used tube bending machine from Jutec Type: 5000 Capacity: up to approx. 40 mm Mandrel length: 4500 mm Rodpfx Aisyfmwxsrech CNC controlled Automatic head Manually rotatable head with hydraulic clamping Incl. 3 sets of tools Year of manufacture: 2009 Very little used

Condition: used, functionality: fully functional, Year of construction: 1976, control type: manual, degree of automation: manual, actuation type: electric, working width: 600 mm, sheet thickness (max.): 3 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness copper (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 3 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 5 bar, pressure (min.): 4 bar, pressure (max.): 5.5 bar, overall weight: 4,500 kg, total length: 3,000 mm, total width: 2,200 mm, total height: 1,800 mm, Equipment: centralized greasing system, MINO GIOVANI BATTISTA Circular Shears for Cutting Steel Sheets 600 mm x 3 mm – used Coil Slitting Line – MINO GIOVANI BATTISTA + Strip Straightener MINO GIOVANI BATTISTA Max. sheet thickness: 3 mm Max. cutting width: 600 mm Knife sets (more than 50 pieces) Inner coil diameter: 400–550 mm Outer diameter: up to 1,500 mm Max. coil weight: up to 5 tons Decoiler and recoiler with spacers Technical Data Drive type: electric Working width: 600 mm Max. sheet thickness: 3 mm Max. steel thickness: 3 mm Power: 22 kW (29.91 HP) Connection voltage: 380 V Frequency: 50 Hz Total weight: 4,500 kg Total length: 3,000 mm Total width: 2,000 mm Total height: 1,800 mm Equipment • Centralized lubrication system • Pneumatic coil removal from decoiler • The machine is powered and currently installed in production Included Free of Charge Along with the circular shears, we provide a sheet metal cold rolling machine free of charge for achieving tight thickness tolerances. MINO GIOVANI BATTISTA – Rolling Machine Rsdpfx Ajyn Shzsirsch Model: LAS Power: 6 kW Weight: 4,500 kg Cold rolling machine (for tight tolerances) Max. material width: 130 mm Max. material thickness: 3 mm Decoiler, belt-driven power transmission Prices Circular shears: EUR 11,000 Rolling machine: EUR 3,500 The rolling machine is included in the package at no extra charge, as it was used together with the line. Disassembly and loading costs: EUR 1,800 Delivery Terms Parity: EXW 10290 Zaprešić – Croatia Loading space length: 6 m Width: 2.2 m Total weight approx.: 9 tons Prices are net of VAT – reverse charge Delivery Time The machine is available 10–15 days after payment. The fixed loading date must be announced at least 7 days in advance for organizing forklift and crane.

Condition: good (used), Year of construction: 1996, machine/vehicle number: 5090, Offer 22186 Rjdpfxsztvgwo Airjch Technical data: - Bending capacity - Pipe at 45 kg/mm²: Ø 6 - 48 mm - Solid material up to approximately: 30 mm - Max. bending angle: 180° - Bending radius: 2 x D - Drive: 400 V / 1.5 kW - Space requirement: approx. W 4500 x H 1400 x D 1000 mm - Weight: approx. 600 kg - with: - Digital bending angle display + fine adjustment of the bending angle - Mandrel bending device, 3.0 m, with hydraulic retraction - Bending tools: 20 R 60; 22 R 66; 25 R 75 mm - 25 R 50; 38 R 114 mm - Various bending mandrels, length: 3000 mm

Condition: used, functionality: fully functional, Manufacturer: Rausch, as well as other manufacturers Diameter: 90 mm, suitable for Rausch vertical reaming machines RS 3, RS 4, RS 6. Redpfez Nynijx Airsch General / technical data: Well-maintained, used reaming mandrels suitable for use with flat reaming tools on Rausch reaming machines of the RS 3, RS 4, RS 6 series. Remarks: We have a large stock of well-maintained, used reaming mandrels for Rausch vertical reaming machines.

Condition: used, Unwinding reel for coil material, DREHER - DIMECO Type 2370 BF Model 653, Year of manufacture 1979 Coil weight max. 2000 kg Coil width max. 320 mm Coil width with guide arms max. 320 mm Coil width without guide arms max. 480 mm Coil inner diameter 340-540 mm Coil outer diameter max. 1400 mm Center of reel crown to floor 900 mm Center of reel crown to reel base 870 mm Reel shaft, support shaft Ø 90 mm - Central spreading adjustment of the reel crown via hand crank (square drive 24 mm) - Mechanical brake on the reel shaft with manual brake force adjustment via hand crank - 6 coil guide arms 500 mm, with toggle clamp - Conversion to motor drive possible, motor mount available, sprocket for roller chain on the reel shaft available Footprint: Width: 170 cm x Depth: 138 cm x Height: 160 cm Space required for transport: Width: 78 cm x Depth: 138 cm x Height: 120 cm Weight 430 kg Good condition Rodpfxsz R D Sno Airjch

Condition: good (used), pipe diameter (max.): 25 mm, pipe length (max.): 2,500 mm, bending radius (max.): 180 mm, CNC Tube Bender Brand: StarBend Model: STAR 250 CN3-PC-S Redjz E U Stjpfx Airsch Year: 2007 Serial Number: 072500924 Type: High-precision CNC tube bender Features: - CNC control with integrated PC - 3 numerically controlled axes - Y-axis (Bending): Controlled by a brushless servomotor - X-axis (Feed/Advance): Controlled by a brushless servomotor - Z-axis (Spatial tube rotation): Controlled by a brushless servomotor. - Tube bending with high repeatability - Max. tube diameter: 25mm (Tube wall thickness of 1.5 to 2.5mm depending on the radius) - Usable length over mandrel: 2,500 mm - Maximum bending radius: 180 mm - Programming by bending sequences - Program memory - High productivity in series production - Pneumatic internal mandrel extraction and insertion. Available Bending Kits: - TUBE 28mm Radius 61mm - TUBE 15mm Radius 35 - TUBE 22mm Radius 36mm

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ* DPPD III 50E 530/150 multi-blade slitting saw Rcjdo Agupfopfx Airjh Catalog number 7405 TECHNICAL DATA - max. cutting height 150mm - max. workpiece width 700mm - working width of the saw mandrel 530mm - max. saw blade diameter 450mm (installed 350mm) 350mm - arbor bore diameter 90mm from above: - pawls - 2 toothed draw shafts from below: - 2 smooth draw shafts - saw mandrel - smooth draw shaft - 4 feed speed settings - feed motor approx. 2kW - 30kW motor - machine dimensions L/W/H 2400x1700x1900mm - weight approx. 3000kg – Polish production – Used machine, very good condition Net price: 38900 PLN Net price: 9050 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes, to identify the product. We only resell products that the manufacturer has previously introduced to the market. We have no business relations with the manufacturer.

Condition: used, Year of construction: 1978, Year: 1978 – recently modernized TECHNICAL DATA: • Max. web width: 1450 mm • Max. unwind diameter: 1000 mm • Max. finished reel diameter: 400 mm • Hydraulic reel lifting • Circular slitting system • 4 Rewind shafts on two turrets • Pneumatic brake • Length measuring and control system Redpfx Aoz Ern Ssirech • Optical edge control Machine has been completely overhauled and equipped with new AC motors, a new cabinet and panels; new PLC Siemens S7; new Montalvo pneumatic brake and controls; new edge control for detecting edges from both the top and bottom.

Condition: ready for operation (used), Year of construction: 1969, Pressing force: 3 t Mandrel diameter: 80 mm Bore: 15 mm Rcedpfx Aiezh Ibpsrsh Stroke: approx. 550 mm Overhang: 250 mm Table size: 300 x 370 mm Cutout in the table: 85 mm Footprint: 1000 x 800 x 2000 mm Weight: 260 kg

Year of construction: 1991, condition: used, functionality: fully functional, empty load weight: 1,015 kg, total length: 1,690 mm, load capacity: 10,000 kg, Tragedorn Load center: 850 Rcedpfx Aijz Ewiuoreh Condition: Ready for use and fully functional Technical condition: good Description: Length: 1690 mm, Diameter: 400 mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 1054447, controller manufacturer: Haas, spindle speed (max.): 12,000 rpm, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, HAAS VF2-SS CNC milling machine with a rotary-tilting table (5-axis) in excellent condition (only minor paint defects in the interior). Redpfe Ab Altsx Airoch Chip conveyor, up to 25 tools can be used simultaneously in the machine (24 in the tool changer + 1 in the spindle), spindle SK40. Renishaw probing system with wireless communication. Includes a wide range of accessories (chuck, mandrels, hydraulic collet chuck on the dividing head, center clamp, collets, etc.). Complete documentation. This machine has been operating flawlessly and reliably until its last use and is only being sold due to the closure of our business!

Year of construction: 2003, condition: used, functionality: fully functional, empty load weight: 3,500 kg, total length: 1,600 mm, load capacity: 42,000 kg, Tragedorn Load center: 1200 ISO class: Terminal West Condition: Ready for use and fully functional Technical condition: very good Rcodpsz Evnvefx Airjh Description: Length: 1600 mm, Diameter: 400 mm

Condition: used, functionality: unexamined, Year of construction: 1995, Bending capacity 6000D: Ø 6 to 60 x 4 mm Rsdpfxezlg Aye Airoch Automatic mandrel retraction Manual twisting device

Condition: like new (used), functionality: fully functional, coil inner diameter: 508 mm, coil outer diameter: 2,000 mm, coil weight: 16,000 kg, coil width: 1,000 mm, product width (max.): 1,250 mm, year of last overhaul: 2022, Self-centering FLENDER recoiler + 2 self-centering FROHLING decoilers Rjdpfxju Hlaue Airoch Coil set: TWO DECOILERS and ONE RECOILER Brand: - Frohling for decoilers - Flender for recoiler Completely overhauled and upgraded with AUTO-CENTERING and linear guides in 2022 (units were already in excellent condition, but lacked all accessories and the CPC auto-centering system) Capacity: 16MT Coil ID: 508mm / OD: 2000mm Max strip width: 1100mm (modifiable to 1250mm) Max line speed: 240m/min Independent lubrication with filter and pump Supplied without motors and speed gearboxes Ready for any inspection at our warehouse in Rovereto (TN), Italy If you have any questions, do not hesitate to contact us. IF INTERESTED, PLEASE CONTACT US — WE WILL CERTAINLY REACH AN AGREEMENT.

Condition: used, functionality: fully functional, Hydraulic mandrel tube bending machine Complete bending sets with bending mandrels and bending shoes: Ø 18, 20, 22, 25, 2 x 30 + 35 mm Additional bending mandrels, but without bending shoes: Ø 28, 2 x 38 + 42 mm Pre-assembly device with hydraulic cylinder Hydraulically driven deburring unit for tubes, inside and outside, from 6 - 48.3 mm Max. tube feed length: 3000 mm Rjdjwnrt Sepfx Airjch Machine weight: approx. 700 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm Rsdpfx Aiju Ibvuorsch control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices *

Condition: ready for operation (used), Year of construction: 1977, Pressing force: 1000 kg Stroke: 240 mm Overhang: 150 mm Table diameter: 180 mm 3 table cutouts: 16, 45 and 55 mm Rodpfx Aezi A I Tjiroch Space requirement: 600 x 420 x 1500 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: Div, 1 set of load beams, trunnions, hooks, grippers, and load beams including 3 heavy-duty roller carriages/transport wagons, 250x80cm various manufacturers such as Tiger, DoLast, Tigrip, etc. Only sold as a complete set! Rodpfx Aszv H I Doirsch Very good condition, see pictures. Item location is 75053 Gondelsheim. See pictures. Shipping via freight forwarder or collection only by prior appointment.

Condition: ready for operation (used), Swisstool P-15 Press, Punch Press Dimensions: Installation dimensions: 700mm x 500mm x (min) 1800mm Transport dimensions: 1200mm x 800mm x 1930mm Weight: 350 kg Overhang: 280mm Stroke: 300mm Adjustment, up/down: 220mm Hydraulic stroke: 150mm You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Rodpszu Ndfjfx Airoch Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data and errors in the description of the item may occur and are subject to change.

Condition: good (used), Year of construction: 2002, received a new control unit in 2019 for €14,000 max. bending diameter: 63.5 mm smallest bending radius: 32 mm Redpfx Aeykl Rzjiroch motor: 30 kW

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Rcedpjtr U Hlofx Aireh Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: 7395, tube wall thickness (max.): 8 mm, bending radius (max.): 600 mm, working height: 1,200 mm, overall weight: 9,000 kg, TECHNICAL DETAILS Tube outer diameter: 40–100 mm Maximum tube dimensions: 110 × 5 mm Maximum wall thickness: 8 mm Outer diameter of solid material: up to 70 mm Tube insertion length / usable length: 1,200 mm Maximum bending radius: 600 mm Bending height: 1,200 mm Rsdez Im Rajpfx Airech MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,600 x 1,400 mm Weight: 9,000 kg