Used Residual Ozone Destroyer for sale (866)

Condition: used, functionality: fully functional, Year of construction: 1994, Residual concrete recycling plant Feeding with screw conveyor Pumps Agitators Gsdpfx Anjywn U Rexeit

Condition: new, Year of construction: 2025, total width: 1,200 mm, total length: 2,500 mm, total height: 2,080 mm, overall weight: 3,700 kg, The Multi Destroyer is a machine specially designed for crushing PCB (Printed Circuit Board). The double-shaft shredder located at the top effectively breaks down PCB and feeds them into the granulator below. The granulator converts the shredded material into fine granules, making it easier to recycle and reuse. Gjdpfxefm E E Ao Anxjit The double-shaft shredder uses special blades made of wear-resistant steel, offering maximum durability and performance. The feed rate of the material can be easily adjusted via a user-friendly control panel. The granulator is optimized for high efficiency, ensuring the final product is of the desired size. The Multi Destroyer uses a jet filter to minimize dust formation, ensuring a cleaner and safer working environment. This feature is especially important in sensitive recycling processes. The Multi Destroyer is an ideal solution for PCB recycling, meeting industry demands with its high performance. Its superior engineering design ensures the machine is long-lasting and durable.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: DOCAT 70, We offer this used ozone generator and abatement device Tonello ECOFREE 2, year of manufacture 2018. Machine type: DOCAT 70 Power supply: 3Ph+GND Voltage and frequency: 400V-50Hz Compressed air pressure: bar Hydraulic pressure: bar Maximum steam pressure: bar Weight: 300 kg Drum volume: l Serial number: 07758 Year of manufacture: 2018 Installed power: 4 kW Maximum peak current: 7 A Maximum operating current: 3 A Giodpfx Ansyvzznoxet Power cable cross section: 4 mm² If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), The machine is fully functional, with a new belt and valve maintenance, 128 valves. Gisdpfx Anow Ufyksxjt

Year of construction: 2023, condition: new, Mobile complex for cleaning cars with ozone model Celette Trioxyclean, France. 6 units available. Fast and completely decompose harmful volatile organic compounds inside the car, such as formaldehyde, ammonia, benzene, TVOC (Total volatile organic compounds), etc., deodorize unpleasant smells of cigarette smoke, alcohol and food, effectively kill suspended bacteria and viruses, and protect passengers from cross infection. Ozone (O3) output: 5000mg/Hr Negative ion: 8 – 10 Million Ozone concentration: 15-25mg/L Gijdpju Dpygofx Anxst Sterilizer rate: 99.99% Cooling type: air-cooled Input Supply: 220/110 Volt | 50Hz/60Hz Weight: 37 KG Dimension (L x W x H) cm: 55 x 40 x 126

Condition: good (used), Year of construction: 1998, Measuring device for checking the gas volume in insulating glass. Width: 204 mm Height: 180 mm Gjdpfx Ajyll H Esnxoit Depth: 270 mm Weight: 5.7 kg

Condition: good (used), Residual current circuit breaker (RCCB), motor protection switch, reversing switch -Type: multi-STOTZ F272/6 Price: per piece Quantity: 25 available -Weight: 0.5 kg Gisdpfx Anob A R Hbjxet

Condition: good (used), Year of construction: 1997, Residual oxygen measuring device for checking the gas volume in insulating glass. Dimensions: Depth: 270 mm Width: 204 mm Gijdpoi Azc Aefx Anxjt Height: 180 mm Weight: 5.7 kg

Year of construction: 2000, condition: good (used), Residual Oxygen Meter for checking the gas content in insulating glass. Dimension: Gedpfxsht Evps Anxsit Width: 245mm, depth: 185mm, height: 95mm, Weight: about 3kg

Condition: used,

Condition: used, Year of construction: 2007, Prominent water treatment plant, consisting of: 1. Softening: The raw water is fed into the double softener. Only one bottle is ever in operation and the other is in regeneration or stand-by. In the softener, calcium and magnesium are replaced by sodium. The system has a volume counter that switches to the other bottle when the preset quantity is reached. Regeneration takes place with saline solution from the brine tank. The value at the outlet is 0°dH. 2. reverse osmosis: Reverse osmosis fills the permeate tank with demineralised water, so-called permeate. Depending on the raw water quality, water temperature, condition of the membrane and correct setting, different conductance values and operating pressures result. The following flow rates are set during commissioning: Permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. permeate tank and ozonisation: The unpressurised 500 l permeate tank has an adjustable level control. For treatment with ozone, the water in the permeate tank is circulated via an adjustable ozone feed point. The ozone is generated from air in the ozone generation system by means of a silent electrical discharge and is available as an ozone-air mixture. The air and the undissolved ozone rise upwards in the permeate tank and are discharged via the residual ozone destroyer. A redox potential and ozone measurement is carried out after the centrifugal pump for monitoring purposes. The ozone dosage is set via the touch panel. You can choose between regulation via the redox potential or the ozone concentration. Additional title: Water softening, reverse osmosis system, ozone sterilisation Gijdow Uvdgjpfx Anxet Permeate output: 600 l/h Concentrate output: 200 l/h Ozone output: 5 g/h Max. working pressure: 16 bar Current: 2 A Voltage: 230 V Frequency: 50 Hz Water: < 5 bar (cooling water) Compressed air: 5,5 - 6,5 bar (max. 10 bar); max. 0,37 Nm³/h Operation / Control: Simatic S7-300, Touch Panel Position: free standing Base construction: Fully mounted on tubular frame with spherical feet Features: Reverse osmosis unit, reaction tank complete with residual ozone destroyer, ozone generator, ozone gas warning device, ozone and redox sensor, switch cabinets with control unit

Condition: used, Used Isobaric Filling Line for Sparkling Wine 3000 bph The isobaric filling line for sparkling and semi-sparkling wine produces 3000 bottles per hour and handles 1.5-liter bottles along with a wide range of formats. The line operates smoothly, and you can inspect it before its decommissioning at the end of April. Every machine in the line includes safety features, and some technical manuals remain available. The bottle formats include Collio, Atmosfera, Astro, Lia, Cuvee, Spumante Italia, Flute, Campana, Extral, Tappo Raso, Emiliana, Bordolese, Borgognotta, Bordolese Nobile, and Borgognotta Alta. Moreover, the seller will supply format change parts along with the line. Additionally, conveyors ensure seamless and continuous movement between machines, optimizing the production process. Gsdpfovxz Aljx Anxeit Description of Main Machines Depalletizer TMG VEGA 60 (2008) In this Used filling line for sparkling wine the depalletizer automatically removes bottles from pallets using its integrated PLC and electronic protection barriers. Furthermore, its system includes a layer pad magazine and an automatic mechanism for removing pads and caps within the same cycle, ensuring efficiency. Rinsing Machine AVE RAI 12 (1999) The rinsing machine cleans the inside of bottles using its PLC system. It effectively removes particles and potential contaminants. As a result, the bottles are properly prepared for filling, which contributes to higher product quality. Ozone Dispenser The ozone dispenser sanitizes bottles before filling by producing ozone gas, a strong oxidizing agent. Not only does the gas eliminate bacteria, yeast, and microorganisms, but it also leaves no chemical residues, thereby guaranteeing high hygiene standards. Isobaric Filling Machine Cobert SUPREMA (1985) The isobaric filling machine fills bottles using 24 filling valves while controlling internal pressure. Consequently, it processes both still and sparkling wines, preserving their stability and quality. Capping Machine AROL (1997) The single-head capping machine applies flush and mushroom corks. As a result, it ensures airtight sealing, which preserves the wine’s flavors and properties over time. Capping Machine KOMPASS (2007) The capping machine applies screw caps (BVS, Stelvin) to bottles with precision. Furthermore, its design accommodates multiple formats and guarantees secure closures for different types of wines. Wirehooder ROBINO & GALANDRINO REKORD 10/2 (1994) The wirehooder automatically applies wire cages using its 10 plates and long-duration magazine. Because the machine loads cages from ground level, it allows uninterrupted operations without delays. Bottle Heating Tunnel COMTEC (2017) The heating tunnel stabilizes the temperature of bottles after filling by spraying them with warm water. Consequently, it helps reduce thermal shock and prevents potential damage to the bottles.

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Gijdpfshwhfiox Anxst Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: ready for operation (used), functionality: fully functional, The Handtmann VF 100 is an extremely reliable and robust compact vacuum filler designed to bring world-class German precision to small-to-medium volume production. It is an ideal, high-efficiency machine for specialized processing, butcher shops, or as a dedicated backup unit. Performance & Precision Handtmann Quality: Delivers the brand's renowned portioning accuracy, minimizing product giveaway and ensuring consistent weights, which is vital for profitability. Giedpfx Aexv R N Ssnxjt Air-Free Filling: Utilizes the reliable Handtmann vane cell feed system, which gently removes air from the product, guaranteeing a void-free, consistent texture and preserving product color. Compact Power: Provides ample filling capacity (typically around 3,000 kg/Hour) and pressure to handle a wide variety of meat, sausage, and convenience food products. Versatile Portioning: Capable of handling a wide portioning range, making it flexible for everything from small links to large chubs. Operational Benefits Minimal Footprint: Designed to be space-saving, making it perfect for operations with limited floor area. User-Friendly Control: Features a simple, reliable control system (often a digital display) for easy recipe setting, quick changeovers, and straightforward operation. Hygienic Design: Constructed entirely from high-grade stainless steel with accessible components, ensuring superior hygiene and effortless cleaning procedures. Reliable Investment: Handtmann machines are known for their longevity and excellent residual value, ensuring this machine is a sound long-term investment.

Condition: new, Year of construction: 2021, functionality: fully functional, Clean air dust extractor, mobile, certified for H3 residual dust concentration. The residual dust concentration of the air is below 0.1 mg/m³! This is achieved by the high-quality filter elements and the fan blades located on the clean air side. Dimensions: - Total length (A): 2275 mm - Total length (A1): 2640 mm - Total length (A2): 1165 mm - Total width (B): 1140 mm - Total width (B2): 1150 mm - Machine height (C): 2260 mm - Machine height (C2): 725 mm - Performance Data: Max. volume flow: 6000 m³/h Nominal volume flow at 20 m/s: 5090 m³/h Nominal pressure at 20 m/s extraction speed: 2680 Pa Extraction connection Ø: 300 mm Cartridge filter – Filter area: 50 m² Sound pressure level: 75 dB Godpfx Anoy R D Sxjxeit Chip containers: 2 x 250 l

Condition: new, functionality: fully functional, Year of construction: 2026, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Gsdpfx Aoikivfjnxjit Cooling Mode: WATER COOLING

Condition: excellent (used), Year of construction: 2017, operating hours: 164 h, Residual Wood Shredder WEIMA WL 4 - 164 operating hours Feed opening: 600 mm x 1050 mm Throughput capacity: dependent on material and screen Rotor diameter: 260 mm Rotor speed: 80 - 125 rpm Motor power: 18.5 kW Number of knives: 28 knives, V-rotor Gijdoy Rncuopfx Anxet Knife dimension: 40 x 40 mm, hollow ground Screen perforation: 30 mm Extraction nozzle diameter: 160 mm Air velocity: 28 m/sec. CE Weight: approx. 1,300 kg Dimensions L x W x H = 2,045 x 1,190 x 1,640 mm including option with free-cutting hopper including all documentation

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. Gisdpfx Anehv U Tqjxst With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) Gijdpor A Eq Rsfx Anxst L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: new, Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Ground table Gjdpfx Ansdcd Dlsxoit “Flexam” belt feeding for the best performance 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during feeding and cutting Oleo-pneumatic tensioning of the blade for better cutting performance Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting Internal/external lubrication of the blade to remove residues of resins and chips 4 dust extraction to optimize the suction of dust and chips Cutting height of 400 mm (500 mm optional) Cutting width up to 400 mm High quality powerful motor kW 15 (HP 20) Ethernet connection for on line service Carbide or stellite blades for best cutting performance DM of saw wheels mm 800 Max. cutting height mm 400 fixed working table mm 1290 x 800 Max. saw blade width mm 54 x 0,9 Max. & min. saw blade length mm 5530 / 5380 motor Kw 15 (HP 20) suction connection nr 2x Ø 120 & 1 x Ø 100 compressed air requirement bar 6/ 27 ltd machine weight Kg 880 feed speed m/min 0 - 30 height of feeder belt mm 300 length of feeder mm 750 feeder roller DM mm 160 Max. feeder opening mm 200 Max. fence opening mm 200 feeder speed var. mt/ min 0-30

Condition: used, Year of construction: 2001, Used Filling Monoblock RIVI 50-60-12 12000 bph Technical Features and Operating Details of the Used RIVI Filling Monoblock  Gedpfxjvxum De Anxsit The Used Filling Monoblock RIVI 50-60-12 12000 bph delivers high efficiency and operational reliability through its integrated bottling system. RIVI manufactured this machine in 2001, combining rinsing, filling, and capping functions into a single unit that optimizes both space and production time. Consequently, the Used RIVI Filling Monoblock suits companies aiming to enhance their bottling operations seamlessly. Monoblock Specifications and Bottle Formats The 50-60-12 model processes PET bottles with diameters between 50 and 95 mm and heights ranging from 150 to 340 mm. Additionally, it supports formats of 1.5 L, 0.7 L, and 0.5 L, enhancing flexibility for various production needs. Furthermore, it achieves a production rate of 12,000 bottles per hour, making it ideal for medium- to high-capacity production lines. The machine measures 5370 mm in length, 4070 mm in width, and 3000 mm in height, and weighs 20,000 kg. Moreover, the system rotates clockwise, which ensures continuous and uninterrupted production flow. Rinsing Section In this section of he Used RIVI Filling Monoblock, 50 grippers firmly hold bottles by the neck, stabilizing them during the rinsing process. Each bottle receives a single treatment, during which filtered water or a sanitizing solution removes dust and residues. In addition, the synchronized rotation system ensures that the rinse covers all areas uniformly, while the controlled drainage system effectively prevents liquid buildup and contamination. As a result, this process thoroughly prepares the bottles to receive the product without compromising quality. Filling Section The machine uses a gravity light depression filling system, which is ideal for non-carbonated liquids such as still water. However, it also efficiently fills sparkling water by maintaining gentle pressure control, ensuring minimal gas loss. With the proper modifications, it can handle certain types of soft drinks, making it versatile for a variety of production needs. The system employs 60 dedicated filling valves, allowing precise product flow while avoiding foaming or turbulence. Sensors continuously monitor and regulate the fill level, ensuring consistent quality even at high speeds. Capping Section The capping section relies on 12 heads to securely apply plastic screw caps. The machine includes an automatic cap feeder, with a hopper capacity of 10,000 to 13,000 caps, supporting Neck 1881, low thread, and sport caps. First, the system automatically feeds and positions the caps above the bottles. Then, each head screws the caps on with the correct torque, creating a tight, hermetic seal that preserves both gas and product freshness. Additionally, integrated sensors detect improper tightening and immediately report any errors. Therefore, the system reduces waste while guaranteeing reliable sealing and operational efficiency.

Condition: used, Year of construction: 2016, Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph It is extremely important to note that this machine is complementary to it’s filling monoblock: (click here). Introduction to the Used Rinsing Machine MITSUBISHI This rinsing machine serves as an advanced solution for the bottling industry. Specifically, Mitsubishi Heavy Industries Mechatronics Systems Ltd. manufactures this 2016 model RNR100H machine to ensure effective cleaning of aluminum bottles. Consequently, it addresses the critical need for efficient and reliable rinsing processes in high-demand production environments. Operational Capacity and Speed The RNR100H operates at an impressive capacity of 39,000 bottles per hour, making it ideal for high-speed production lines. Additionally, the machine handles aluminum bottles in various formats, including 0.29L, 0.3L, 0.31L, 0.4L, and 0.41L, thereby adapting to specific production needs. Moreover, the grippers rotate clockwise, which optimizes workflow and significantly enhances the rinsing process’s efficiency. As a result, manufacturers can achieve higher throughput without compromising on quality. Gripper System and Double Treatment Furthermore, the  Rinsing Machine MITSUBISHI  features 100 grippers, allowing it to treat numerous bottles simultaneously. This double treatment system involves two distinct phases: firstly, the machine uses water containing hypochlorous acid for effective disinfection. Subsequently, the second phase employs pure water to ensure the complete removal of chemical residues. Therefore, this dual-step approach guarantees thorough cleaning and minimizes the risk of contamination. Compatibility with Filling Machines Gedpfx Aevgvhxsnxoit A crucial technical aspect of the RNR100H lies in its compatibility with various filling machines. Specifically, the filling machines must have a corresponding height between 120 and 200 mm and a diameter between 50 and 80 mm. These parameters ensure optimal integration with existing production lines, thereby reducing adaptation times and enhancing operational continuity. Consequently, manufacturers can seamlessly incorporate the rinsing machine into their workflow without significant downtime. Mechanical Structure and Maintenance Moreover, the mechanical structure of the Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph guarantees durability and reliability. The machine’s components, made from high-quality materials, resist corrosion and wear, ensuring a long operational life even in intensive production environments. Additionally, the modular design facilitates preventive maintenance, allowing for the rapid replacement of worn parts. As a result, downtime is minimized, and maintenance costs are effectively controlled. Energy Efficiency Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph From an energy perspective, the RNR100H optimizes energy usage to reduce consumption without compromising performance.

Condition: used, Year of construction: 1996, Used Isobaric Filling Monoblock Alfatek 12/1 Introduction to the Isobaric Filling Monoblock Alfatek Firstly, the Used Isobaric Filling Monoblock Alfatek 12/1 stands out as a significant innovation in the bottling industry. Offering unparalleled precision and efficiency, this article aims to detail its technical prowess and application in a professional setting. Design and Specifications At the heart of this monoblock, the ALFATEK 12/1 model features 12 self-leveling taps, ensuring uniform and accurate filling of bottles. Moreover, its stainless steel construction not only enhances durability but also ensures cleanliness. Furthermore, its compact size allows for efficient space utilization in various industrial setups. Gijdpfxsvgt Txe Anxet Advanced Filling Technology Importantly, a key component in th Isobaric Filling Monoblock Alfatek is the degassing station, crucial for removing residual air and preserving the bottled product’s quality. Additionally, the monoblock’s technology includes a vacuum and gas injection station, which precisely controls the filling environment, optimizing the process for different liquid types. Versatility and Flexibility Regarding versatility, the machine’s single-head capper, equipped with an AROL head, accommodates both mushroom and straight cork caps. This feature is beneficial for bottling a wide range of products. Also, the Isobaric Filling Monoblock Alfatek can handle two bottle sizes, adding to its flexibility. Bottle entry is designed from the left, catering to various production line layouts. Safety and Maintenance In terms of safety, the design features comprehensive safety protections, ensuring secure operation and reducing accident risks. Additionally, the inclusion of a user, maintenance, and spare parts manual simplifies its upkeep. Consequently, regular maintenance ensures long-term reliability and efficiency. Performance and Reliability Having been operational until November 2022, the monoblock demonstrates not only consistent performance but also reliability. With a capacity of 1500 bottles per hour, it meets the demands of high-volume production lines. Indeed, its robust design and advanced technology make it a valuable asset in the bottling industry. Conclusion of the Isobaric Filling Monoblock Alfatek In conclusion, the Used Isobaric Filling Monoblock Alfatek 12/1 is more than just equipment; it’s a testament to advanced engineering in the bottling industry. Its blend of precision, versatility, and efficiency makes it an ideal choice for professional bottling operations, representing a wise investment for businesses aiming to enhance their bottling processes.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 210 mm, travel distance Z-axis: 450 mm, number of axes: 3, This 3-axis TRAUB TNA 300 horizontal turning machine was manufactured in 2000. It features a spindle diameter of 65 mm and includes a high-pressure coolant system, driven tools with 4 kW power, and an automatic bar change system. The machine is equipped with a chip conveyor and tool monitoring systems for enhanced efficiency. If you are looking to get high-quality turning capabilities, consider the TRAUB TNA 300 machine we have for sale. Contact us for further details. • Spindle diameter: 65 mm • Machine version: without tailstock • Basic configuration: included • Hydraulic hollow clamping cylinder: included • High-pressure coolant system: 12 bar / 3 bar • Control system: TX8H, 32-bit technology; processor latest generation (at time of build); parameter data on diskette • Axes/functions: • C-axis: included (numerically controlled spindle positioning and turning axis) • Y-axis: not included • Driven tools: included; power 4 kW • Monitoring and safety: • Tool breakage monitoring: included • Tool wear monitoring: included • Automatic drive shutdown after material end: selectable via parameter • Error message via parameter: selectable • Guideway cover: included • Workholding: • Collet clamping system: ROHM • Collet system compatibility: • DIN 6343 size 185E, max diameter 60 mm • DIN 6343 size 48, max diameter 42 mm • Rubberflex series 52 compatible • Rubberflex series 36 compatible • Fahrion collet FM 1149 MB compatible • Fahrion collet FM 1148 MB compatible • Electrical: • Electrical system according to: VDE / EN 60204 • Operating voltage: 400 V / 50 Hz • Accessory voltage: 230 V / 50 Hz • Control voltage: 24 V DC • Multi-voltage transformer: 460 / 400 / 380 / 220 / 200 V • EMC: • Compliance: industrial class A • Standards: EN 50081 / EN 50082 / EN 55011 / EN 55022 • Machine standards: DIN EN 292; DIN EN 294; DIN EN 418; DIN EN 60204-1 • Pneumatic system: Mannesmann Rexroth ISO Additional equipment • Chip conveyor: included • Workpiece removal device: included; via conveyor, left side discharge • Bar feeder preparation: included • Bar feeder: TRAUB DNH 61-3000 (automatic) • Feeding: telescopic pusher system • Bar shapes: round / hexagonal / square • Maximum bar length: 3200 mm • Maximum bar diameter (long bars): 63 mm • Maximum bar diameter (short pieces): 65 mm • Automatic bar change: included • Residual piece removal: forward • Central adjustment of bar diameter: included • Stepless feed force adjustment: included • Central magazine adjustment: included • No guide channel change required • No clamping sleeve change required Giedpfx Ajy Sg Dgsnxet • Short remnant pieces possible • Transverse loading system • Transport weight: approx. 2100 kg Technical Specification Counter Spindle No Driven Tools No

Condition: new, Year of construction: 2026, CORMAK CL300 Pulsed Laser Cleaning Machine 300W The CORMAK CL series pulsed laser cleaners are industrial devices designed for fast, precise, and non-contact removal of contaminants from metal, non-metal, and wooden surfaces. Depending on the application requirements, three power variants are available – CL200, CL300, and CL500 – all based on JPT MOPA pulsed fiber laser sources. This ensures high process stability, a wide range of parameter adjustment, and the ability to work both with delicate components and more demanding surfaces. Technical Specifications Parameter Value Dimensions (W × H × D) 260 × 460 × 490 mm Weight 31 kg Laser Source Brand JPT Fiber Interface QCS Operating Mode MOPA Laser Wavelength 1064 nm Maximum Pulse Energy 5 mJ Fiber Cable Length 5 m Laser Pulse Frequency 1–3000 kHz Pulse Duration 13–500 ns Laser Spot Size 7 ± 1 mm Laser Line Length 0.01–150 mm Laser Line Width 0.01–150 mm Process Gas None required Scanning Area (Lens) 130 × 130 mm, F254 Cooling System Air-cooled Scanning Speed 0–30000 mm/s Operating Temperature 10–30°C Operating Humidity < 70% non-condensing Operating Voltage AC 230 V, 50/60 Hz Efficient and Precise Surface Cleaning CORMAK laser cleaning systems effectively remove: rust, paint coatings, varnishes, operational deposits, oxides, oil residues, resins, and other difficult contaminants. Thanks to adjustable pulse energy, frequency, and pulse duration, the cleaning process can be optimized for both: precise and selective cleaning of molds, dies, tools, and precision components, and efficient preparation of larger surfaces for further processes such as welding, painting, or bonding. The non-contact nature of laser cleaning minimizes the risk of mechanical damage, microcracks, or deformation of the base material. Advanced JPT MOPA Technology The use of JPT MOPA laser sources provides a wide adjustment range for pulse frequency and pulse width, allowing optimal energy density settings depending on the type of contamination and the base material. The long fiber cable increases working flexibility at greater distances from the main unit, which is especially useful when working on: large structures, production lines, Giedpfey Sgn Ssx Anxot installed machine components, steel constructions, molds, facades, and industrial equipment. All CL series models operate at a wavelength of 1064 nm, ensuring high effectiveness on common industrial materials such as: structural steel, stainless steel, aluminum alloys, and many other technical substrates. Cost-Effective and Environmentally Friendly Operation The CL series devices are air-cooled and do not require process gases or abrasive materials, which: simplifies installation, reduces operating costs, minimizes maintenance requirements, and makes the cleaning process more environmentally friendly. High scanning speeds combined with adjustable beam parameters significantly reduce processing time compared to traditional methods such as: sandblasting, shot blasting, or chemical cleaning, while ensuring repeatable results and a high-quality surface finish after cleaning.