Used Clean Air Device for sale (38,441)

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg. Ijdpfxscnw T Ij Alxoif

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector, Year of Manufacture: 2024 Exhibition model - Immediately available Exceptional special price Technical data, Power Unit 250 P Iisdpecdy I Rjfx Alxsf Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volumetric flow rate: 4900 m³/h Rated volumetric flow rate: 3524 m³/h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Available from warehouse 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Iiedpfx Alscnw U Doxof Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: new, Year of construction: 2025, Description: IE 3 motor as standard Maximum volume flow up to 8,500 m³/h at the fan Approximately 73 m² filter area, residual dust content after H3 Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Already meets the requirements of prEN 16770 Optional: Models with type-tested rotary valve airlock (FSA) Tested backflow damper Integrated automatic extinguishing system Suction nozzle: 350 mm Motor rated power: 11 kW Iiedpfxscqy I Ss Alxjf Voltage: 400 V / 50 Hz Maximum volume flow: 8500 m³/h Rated volume flow: 6927 m³/h Negative pressure at Vnenn.: 2765 Pa Filter area: 73 m² Chip collection volume: (net/gross) 3 x 165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (L x W x H): 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock at 54634 Bitburg

Condition: ready for operation (used), Year of construction: 2017, operating hours: 7,315 h, functionality: fully functional, machine/vehicle number: 4445, travel distance X-axis: 2,320 mm, travel distance Y-axis: 1,980 mm, travel distance Z-axis: 860 mm, controller model: Siemens Sinumerik 840D sl, spindle speed (max.): 40,000 rpm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €425,000 plus VAT! Note: This sale concerns the sister machine of the identical Hamuel Reichenbacher machine that was recently auctioned. TECHNICAL DETAILS Travel distance X1/X2 axis: 2,320 mm Travel distance X3/X4 axis: 2,320 mm Iiedpfxeztxczo Alxsf Travel distance Y1/Y2 axis: 1,980 mm Travel distance Z1/Z2 axis: 860 mm Rotational range B1 axis: ±181° Rotational range B2 axis: ±181° Rotational range C1 axis: ±361° Rotational range C2 axis: ±361° Spindle speed: 40,000 rpm Tool holder: HSK-E40 Spindle power: 7 kW Number of spindles: 2 Travel speed in X direction: 90 m/min Travel speed in Y direction: 45 m/min Travel speed in Z direction: 90 m/min Number of tools: max. 6 Tool diameter with 4 tools: max. 40 mm Tool diameter with 2 tools: max. 240 mm Tool length from reference plane: max. 270 mm Tool weight: max. 2 kg Total weight of all tools: max. 24 kg MACHINE DETAILS Control system: Siemens Sinumerik 840D sl Compressed air supply Compressed air quality: according to DIN ISO 8573-1 Pressure: min. 7 bar Air volume flow: approx. 1,000 Nm³/min Voltage: 400 V (±5 %) Frequency: 50 Hz Mains connection: 3 phases, neutral conductor and protective conductor Short-circuit strength Ic: 17 kA Dimensions & Weight Dimensions (X x Y x Z): approx. 5,800 x 3,600 x 3,000 mm Machine weight: approx. 15.0 t Operating Hours Spindle hours, spindle 1: 7,872 h Spindle hours, spindle 2: 7,315 h EQUIPMENT Chip conveyor Hexagon 3D measuring probe Note: Further technical details can be found in the attached offer. Clamping devices and tools are not included in the offer.

Year of construction: 2021, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC S7-1500, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 3, This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Laser Source: cleanLASER CL600 Mid-Power Laser • Laser Type: Diode-Pumped Solid-State Laser (DPSSL) • Laser Wavelength: 1064 nm • Laser Operation Mode: Pulsed (ns) • Average Laser Power: 600 W ±5% • Alignment Laser Wavelength: 658 nm • Alignment Laser Power: 28 mW • Cooling System: Integrated Water-to-Water Cooling System • Additional Chiller: Cooler ONE Plus Air (Air-Cooled) • Fiber Cable Type: Quartz Fiber Optic Cable • Fiber Length: 10 m • Fiber Geometry: Square • Protective Hose Diameter: 21 mm • Optical System: STAMP 25 2D Optics • Optics Connection: 90° • Focal Length: 163 mm • Control Unit Brand: Siemens • Control Unit Model: SIMATIC S7-1500 PLC • Drive System: Siemens 1FK7 Servo Drives • Linear Axis System: 3-Axis Portal System • Maximum Axis Payload: Approx. 25 kg • Axis Speed (X/Y): >200 mm/s • Communication Interface: Profinet • Digital I/O: Standard • Software: cleanSTUDIO / cleanCONTROL Iedpfszuy Inox Alxoif • Industrial PC: 19" Rack PC • SSD Capacity: 256 GB • RAM: 8 GB • Processor: Intel Core i5 (minimum) or equivalent • Robot: ABB Robot • Gripper: 2-Workpiece Gripper • Conveyor System: Bosch TS2 Transfer System • Loading System: Manual Workpiece Carrier Loading • Discharge Conveyor Length: Approx. 4.8 m • Extraction System: ULT Maxi Plus • Fan Capacity: Max. 4,000 m³/h • Maximum Pressure: 3,300 Pa • Filter Cartridges: 4 × 600 mm • Dust Drum Capacity: 200 L • Extraction Power: 5 kW • Power Supply: 400 V, 3-Phase

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, operating pressure: 50 bar, high-pressure hose length: 1,500 mm, empty load weight: 100 kg, input voltage: 230 V, water tank capacity: 100 l, warranty duration: 12 months, We offer for sale a Pressure Washer combined with a vacuum cleaner AP 100/50M. The machine allows for the removal of residual water left on surfaces after pressure cleaning, which enables use even on floors without a drain. It is recommended for cleaning bathrooms and washrooms that need to be accessible immediately after cleaning. The AP 100/50 M is ideal for hotels and SPA centers, public facilities (stations, airports), industrial baths, restaurant kitchens, sports facilities, and many more. This is an essential machine for cleaning companies managing such premises. Condition of the machine – Very good Year of manufacture: 2014 Iiodpfxowz Nmpo Alxof All machines purchased from us come with a 12-month WARRANTY. Technical specification: Clean water tank: 100 l Dirty water tank: 70 l Maximum pressure: 50 bar Pump performance: 5 l/min Turbine power: 1800 W Pump power: 370 W Voltage: 230 V Weight: 100 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Pulsed laser cleaning device with 200 watts of laser power. Significantly more effective than continuous lasers in cleaning and rust removal applications, such as those used in welding lasers. Iijdpfsuhcd Rsx Alxsf - Demo machine / (used/very good condition), approximately 70 operating hours. - Come and see and test it at our facility now. - Top-quality device at a great price from our showroom. - For paint stripping, rust removal, cleaning stainless steel welds, etc. - 200-watt pulsed laser / air-cooled - German-language menu - Available immediately Please also note our attractive leasing/hire-purchase offers. Sale only to commercial businesses. Machine dimensions approximately: Width: 60 cm Height: 120 cm Depth: 110 cm Weight: approximately 100 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11413, Year of construction: 2019, operating hours: 12,190 h, load capacity: 5,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: duplex, power: 55 kW (74.78 HP), fork length: 2,400 mm, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: approx. 3,300 mm Load capacity: 5,000 kg Attachment: Kaup 4.8T160BIZ or 4.8T160BIZA Design: Integrated fork positioner with side shift Forklift side connection: Integrated, suitable for Toyota 40-8FD50N Fork side connection: ISO class 3B Hydraulic functions: 2 Overall width: approx. 1,350 mm Opening range: 0–1,000 mm, edge to edge Overhang: approx. 202 mm from the front edge of the lifting carriage Lateral shift: up to ±250 mm from the forklift's longitudinal axis Attachment load capacity: 2,500 kg at a load center distance of 1,200 mm Remaining load capacity: 2,500 kg with centered load and a load center distance of 1,200 mm Attachment weight: approx. 650 kg Design: Bolt-on forks Fork cross-section: 160 × 50 mm Fork length: 2,400 mm Load guard Kaup 4.8T479.1 Design: Load guard with horizontal square tubes Width: approx. 1,000 mm Height from floor: approx. 1,200 mm for ISO class 3B Weight: approx. 24 kg MACHINE DETAILS Mast: Duplex tele-mast Engine: Diesel Rated power: 55 kW Front track width: 1,150 mm Front tire size: 300-15/8.00 Rear tire size: 7.00-12/5.00 Weight: 8,040 kg Operating hours: approx. 12,190 h Iodeztwm Sspfx Alxjif EQUIPMENT EEC specification SAS – System for active stability Variable displacement pump 4-way hydraulics with hose routing for the 3rd and 4th valve SE tires front, single tire SE tires rear Professional cabin Air conditioning Mini-lever with direction switch and armrest Rear grab handle with horn button Deluxe multi-function display OK monitor Warning light LED blue spot warning light to the rear Fire extinguisher: 2 kg Gear change protection Cold weather package with 5W-30 oil and larger battery German type plate TIESA Modification Center Smart Access driver access card Diesel particulate filter Integrated Kaup fork positioner Valve block side shift Kaup load guard The overall height and weight of the forklift must be taken into account when selecting the transport vehicle. There is no loading ramp on site. However, a forklift with a load capacity of 15 tons is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The technical data provided are based on the original offer. No guarantee is given for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 200 W, machine/vehicle number: ELXX-25100004, For sale is a professional, pulsed laser cleaning machine (pulse laser) of the type GL-PM-200 from the manufacturer EraserLaser GmbH. The unit dates back to the 2025 model year, has very few operating hours, and is in excellent, fully functional condition. In contrast to continuous CW lasers, this pulsed system is ideally suited for extremely precise and material-friendly cleaning. It is the ideal solution for demanding tasks where the base material (e.g., sensitive molds, historical components, weld seam preparation, or precision tools) must not be subjected to any thermal influence or material removal. Rust, paint, oils, and oxide layers are removed precisely and without leaving any residue. Product benefits & highlights: Maximum precision without heat input: Thanks to the fine adjustment of pulse width (20–500 ns) and frequency, the cleaning can be precisely tailored to sensitive surfaces. Compact & flexible: The laser is housed in a robust enclosure and can be ideally used in mobile applications. Extensive parameter control: Parameters such as laser power, scan speed, frequency, and track density (Spiral Series) can be precisely controlled via the intuitive 7-inch touch display. Quick access to memory locations: Up to 5 user-defined work modes can be saved to allow quick switching between different cleaning requirements in everyday work. Easy maintenance & care: Low maintenance thanks to reliable air cooling. Integrated preview laser for precise alignment of the cleaning area on the workpiece. Technical data at a glance: Model: GL-P-M-200 Laser type: Pulsed fiber laser (pulse laser), Laser Class 4 Wavelength: 1064 nm Laser power: 200 watts (continuously adjustable from 10% to 100%) Laser frequency: 5 kHz – 4000 kHz Pulse width: 20 ns – 500 ns Cleaning area (length x width): Variable, adjustable up to 100 mm x 20 mm Fiber length (hose assembly): 4 to 10 meters Cooling: Air-cooled Power connection: 220V AC (Schuko plug, fuse rating min. 16A) Iiodpjziww Aefx Alxof Condition & scope of delivery: Condition: Very well-maintained, used condition, hardly used, visually and technically flawless. The protective lens and optics are clean and fully functional. Scope of delivery: Laser cleaning system GL-P-M-200 including hose assembly and cleaning gun. Important safety note: Operating a system of Laser Class 4 requires the mandatory use of approved laser safety goggles (DIN EN 207 for the wavelength range of 1064 nm) as well as compliance with applicable occupational safety regulations (including respiratory protection/extraction).

Condition: new, operating hours: 5 h, functionality: fully functional, control cabinet width: 800 mm, control cabinet height: 1,700 mm, input voltage: 400 V, input current: 16 A, type of input current: AC, Equipment: documentation/manual, Individual System L25-2203 cleanCABINET CL 100G-BRP Complete laser system for integration as Iijdpfxozl Slys Alxsf individual components, consisting of the following modules: - Special item: Low-power laser production Laser system CL100G-BRP, diode-pumped laser Wavelength 1064nm, operating mode: pulsed (ns) Average laser power: P = 100 W +/- 3% Prepared for pilot laser, 19" rack-mount design Comparable to 2003836 Special configuration: 10m fiber length, extended pulses - 2D optics system Stamp 10 for LP lasers (CL12BRP-CL100BRP) Automated 2D optics with connection for back-reflection protection (BRP) and 90° deflection, max. working area: 120mmx120mm (=160mm)/290mmx290mm (F=420mm) Focus diameter depends on the focal length of the optics Included components: 2D optics system Stamp 10 90° connection Control electronics Cable set cleanSTUDIO/cleanCONTROL license for 2D optics (without axis system support) RTC - Focusing lens f=254, fully quartz, High grade, working area approx. 150mmx150mm Minimal focus shift - BG protective glass slide STAMP 10/14 F420 Quick-change slide for mounting on the Stamp14 with locking monitoring - Alignment laser for low-power lasers (LP) (CL12G-CL-500G) The alignment laser allows monitoring the beam incident point on the component surface. Installation in the beam source, coupling into the fiber transmission, wavelength = 660nm, power: P = 0.5 mW (min. 0.2mW, max. 1.0 mW) - Decentralized laser source housing W/L Housing for the CL100 beam source including air-water heat exchanger 2kW, see 3D-CAD file. - GS control cabinet 1-1600 (CL12G-CL100G) Update: 32m cable length Laser housing in control cabinet design, type 1/1600 for low-power laser systems (CL12G-CL100G) consisting of: cabinet frame with Rittal double-bit lock, structural powder coating, RAL 7035S, optional air conditioning Installed on heavy-duty rollers, braked, 250kg load capacity, Fiber/cable feed-through through the roof, power supply via Harting Han6, left side panel, safety circuit "Performance Level D", installation position of laser and fiber outlet variable, emergency stop, key switch for starting and main switch in the front door, tested according to DGUVV3 Dimensions: HxWxD: 1600x600x800mm requires operation visualization, cooling capacity adjusted to the ambient temperature at the installation location WITHOUT AIR CONDITIONING as it is only for accommodating HMI, PC and PL-D technology including PLD technology PLD item as plug-in module (see below or alternatively wired in the control cabinet - BG housing 19" 2U PLD PLD plug-in for safe shutdown of low-power laser systems, installed in 19" housing - 2U for use with laser systems - VS-OPT Ethercat copper (MP/HP 2D) Ethercat interface for mid and high-power (2D) systems - fieldbus interface - 2D interface - Ethercat copper - cleanSTUDIO protocol - IPC 19" 1U - Touch panel standard 17-inch with HDMI+DP-VGA - Keyboard with trackball DE QWERTZ keyboard with trackball (DE)

Condition: excellent (used), Year of construction: 2021, Used clean air dust collector with frequency converter Year of manufacture: 2021 Max. volume flow up to 10,000 m³/h at the fan Approx. 73 m² filter area Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content of 0.1 mg/m³ safely maintained (wood dust) Models with type-tested rotary valve airlock (FSA) Tested backflow flap Integrated automatic extinguishing system 350+ P Suction nozzle 355 mm Motor rated power 15.0 kW / 3-phase Voltage 400 V / 50 Hz Max. volume flow 10,000 m³/h Rated volume flow* 7,127 m³/h Negative pressure at Vnenn. 3,347 Pa Filter area 73 m² Chip collection volume (net / gross) 3 x 165 L / 3 x 241 L Iedpszizz Sjfx Alxsif Sound pressure level 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2,361 Weight 1,074 kg Location: in stock at warehouse 54634 Bitburg - immediately available -

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 1,500 W, machine/vehicle number: ELKY-2504021, For sale is a professional, continuous laser cleaning machine (Continuous Wave) of the type GL-C-CWM-1500, manufactured by EraserLaser GmbH. The unit was manufactured in 2025, has very few operating hours, and is in excellent, fully functional condition. This system is ideally suited for the fast, thorough, and non-contact removal of rust, paint, oils, grease, and oxide layers from metallic surfaces. Thanks to its high power of 1500 watts and the particularly long hose package, the unit offers maximum flexibility in professional workshop or industrial environments. The exact, cumulative operating hours can be read transparently directly on the system display. Product advantages & highlights: High flexibility: The 15-meter-long fiber optic hose package enables comfortable working, even on large components, in hard-to-reach areas, or on scaffolding. Precise control: Parameters such as laser power, frequency, and beam width can be set precisely via the intuitive 7-inch touch display and saved as presets. Gentle surface treatment: The variably adjustable pulse rate allows the heat input to be regulated precisely – also ideal for more sensitive workpieces or thin sheets. Reliable cooling: An integrated Hanli water cooling system ensures stable temperature monitoring and enables trouble-free operation in continuous mode. Ergonomic cleaning gun: Equipped with a red preview laser for accurate alignment of the cleaning area and an automatic compressed air control to protect the optics from dirt particles. Iedpfoziwwisx Alxjif Technical data at a glance: Model: GL-C-CWM-1500 (mobile steel housing on heavy-duty rollers) Laser type: CW fiber laser (Continuous Wave), laser class 4 Wavelength: 1070 nm Laser power: 1500 watts (continuously adjustable from 10% to 100%) Laser frequency: 1000 Hz – 9000 Hz Cleaning width: 1 mm to 150 mm (variably adjustable) Fiber length (hose package): 15 meters Power connection: 220V AC / 32A connection (protected with 25A) Condition & scope of delivery: Condition: Very well-maintained used condition, low operating hours, optically and technically flawless. Protective lenses and optics are clean and fully operational. Scope of delivery: Laser cleaning system GL-C-CWM-1500 including 15m hose package and cleaning gun. Important safety note: The operation of a system of laser class 4 requires the mandatory wearing of approved laser safety glasses (DIN EN 207 for 1070 nm) as well as compliance with applicable occupational safety regulations (including extraction).

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: 23-006, For sale is an ultrasonic cleaning device / ultrasonic system from Schmitt Ultraschalltechnik GmbH, type SUT70USFL. The system is housed in a robust stainless steel enclosure and is mounted on wheels for mobility. The device features a lid with handles, a control panel with a main switch, a temperature display/temperature control, and separate switches for the system functions. Thanks to the 230 V connection, the system can be used flexibly and is suitable for workshops, production, maintenance, cleaning of components, or industrial applications. The machine is in used but like-new condition. Ideal for the professional cleaning of workpieces, tools, components, or small parts. Technical data according to the nameplate: Manufacturer: Schmitt Ultraschalltechnik GmbH Type / Model: SUT70USFL Serial number: 23-006 Year of manufacture: 12/2023 Operating voltage: 230 V Power: 0.8 kW Internal number: RG-231214/0839 Design: Stainless steel enclosure Mobile: mounted on wheels CE marking present Equipment / Features Ultrasonic cleaning system in a stainless steel enclosure Lid with handles Control panel with main switch Temperature control / temperature display Separate function switches Mobile design 230 V connection via industrial plug Compact design Condition Used, with normal signs of wear on the stainless steel enclosure. Iiodpfx Aloy Uwcxoxjf Terms of sale: Sale exclusively to commercial businesses/entrepreneurs. The machine is sold as a used machine, as described or as inspected, with exclusion of any warranty for defects/liability. No guarantee is given. Errors and prior sale are reserved. Inspection possible by arrangement. Sale is from our location.

Condition: used, Gun cleaning device MARX PWA 900 -used- Housing parts made of stainless steel, timer, fresh spray nozzle ----- Technical data ----- Iiodju R Tfaepfx Alxsf Dimensions (LxWxH): 670 x 510 x 370 mm, Compressed air: 6 bar

Year of construction: 2009, condition: ready for operation (used), Floor area: 46.25m², air flow: 1000m³/h, relative humidity: 25-35%, length: 8500mm, width: 5000mm, height: 3341mm, with documentation. Iisdpfx Ajpcgy Rolxsf

Year of construction: 2023, operating hours: 500 h, condition: used, functionality: fully functional, machine/vehicle number: Typ / Modell: NF-LC-M 500, Type / Model: NF-LC-M 500 Laser power: 500 watts Spot mode: Multi Water-cooled Max. pulse energy (mJ): 15 Working distance / scan width: 185 – 438 mm / 105 – 300 mm Iodpfszq H Uaex Alxoif 20 µm rust removal (m²/h): 13.9 20 µm oil contamination removal (m²/h): 15.3 20 µm paint / coating removal (m²/h): 10.5 5 µm galvanized sheet removal (m²/h): 2.0 Removal of surface contaminants (m²/h): 16.2 Automotive paint removal (m²/h): 2.2 Power consumption: 3 kW Voltage / Hz: 230 V / 50 Hz Dimensions (cm L x W x H): 95 x 61 x 103 Weight (kg): 177

Year of construction: 2019, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 6, This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Application: Automated Laser Cleaning / Surface Treatment of Metal Components • Laser Source: cleanLASER CL600 Iedszuy Stopfx Alxjif • Laser Type: Q-switched Fiber Laser • Average Laser Power: 600 W • Wavelength: 1064 nm • Laser Class: Class 4 (Laser Source) • Complete System Classification: Laser Class 1 • Laser Optics: STAMP 25 • Scanner Type: 2D Scanner • Working Scan Field: Approx. 65 × 65 mm • Objective Lens: f = 163 mm • Red Positioning Laser: Yes • Pulse Frequency: Variable • Beam Delivery: Fully Aligned Beam Path • External Fiber Length: Approx. 8 m • Door Interlock Connection: Yes • Remote Diagnostics: TCP/IP / USB • Fieldbus Interface: Profinet • Software: cleanSTUDIO • Telediagnostic Software: CLL Remote Diagnostics • Robot Type: 6-Axis Industrial Robot • Robot Programming: Teach Mode • Robot Gripper: Single Part Gripper • Loading System: Manual Loading • Conveyor System: Bosch T2 Carrier System • Buffer System: Multiple Workpiece Carriers • Unloading: Automatic Conveyor • Conveyor Length: Approx. 2 m • Workpiece Carrier: Not Included • Designed Workpiece Types: 2 • Machine Footprint (W × D × H): Approx. 2,035 × 2,200 × 2,215 mm • Machine Frame: Welded Steel Base Frame • Cell Construction: Aluminium Profiles • Work Table: Aluminium T-Slot Plate • Front Door: Folding Door • Electrical Cabinet: Integrated Double Cabinet • Cabinet Width: 1,200 mm • Cabinet Depth: 800 mm • Cooling Requirement: External Water Cooling (

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Max. volume flow rate: 5000 m³/h Nominal volume flow rate: 20 m/s, 3540 m³/h Nominal negative pressure at 20 m/s: 2500 Pa Residual dust concentration: 0.1 mg/m³ Sound pressure level: 75 dB Container Automatic filter cleaning Spark arrester Iijdpfoznwz Sjx Alxsf The ductwork to multiple machines can be included Operational shutdown Dimensions: 2640 x 1140 x 2260 mm Extraction connection: 250 mm Weight: 825 kg Motor power: 5.5 kW Motor voltage: 400 V (50 Hz)

Condition: used, ALKO clean air extraction unit, Power Unit 200P - used Air filtration using filter hoses, Iijdpfxoy T Ebgs Alxof Cleaning performed pneumatically, Dust-tested, Mobile collection container ----- Technical data ----- Extraction nozzle diameter: 200 mm, Nominal air flow rate: 2,261 m³/h, Maximum negative pressure: 2,174 Pa, Number of bags: 2, Motor: 3 kW, Compressed air connection: 6 bar, Dimensions (L x W x H): 2,300 x 850 x 2,050 mm, Weight: 470 kg

Year of construction: 2014, condition: good (used), Melag Melatherm 10 DT Thermal Disinfector The Melag MelaTherm 10 DT is a washer-disinfector specifically designed for the automated reprocessing of instruments in medical and dental settings. It integrates essential functions such as active drying and media loading directly into the unit to save space in the practice. Melag Melatherm 10 DT Thermal Disinfector The Melag MelaTherm 10 DT is a washer-disinfector specifically designed for the automated reprocessing of instruments in medical and dental practices. It integrates key functions such as active drying and media loading directly into the unit to save space in the practice. The Melag MelaTherm 10 DT is a thermal disinfector specifically designed for the automated reprocessing of instruments in medical and dental settings. It integrates important functions such as active drying and media loading directly into the unit to save space in the practice. Dimensions: The unit measures approximately 59.8 x 81.8 x 67.8 cm (W x H x D) and therefore fits under a standard 60 cm worktop. Capacity: The optimized reprocessing chamber offers space for instrument sets for up to 45 patients per batch. Active drying: Reliably protects instruments from corrosion and recontamination thanks to integrated external and internal drying. Integrated process media: Cleaner, neutralizer, and rinse aid are stored in a space-saving drawer directly within the unit. Manufacturer: Melag Type: Melatherm 10 DT Voltage: 230 V Year of manufacture: 2014 Financing through our bank is also available. komplett-konzept.leasingo.de Iodpfoyk Eugex Alxoif Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, Integrated pre-separator Integrated automatic extinguishing system Efficient and economical: large-volume compressed air tank with with fast-switching diaphragm valves for effective OPTI JET filter cleaning and minimum compressed air consumption. So simple and so effective: OPTI JET cleaning and bag filter with bag filter with snap ring lock. Extremely economical: Energy-efficient drives in accordance with IE3 Safe in the event of an emergency: Maintenance-friendly automatic extinguishing system. Peace and quiet: the soundproofed air recirculation system from AL-KO. All options are open: PLC control for manual and automatic automatic operation. Countless options from machine detection to slide control to frequency-controlled operation operation, to name just three examples. Nothing goes wrong: Collecting container with inspection window. Practical down to the last detail: container lock with ergonomically ergonomically shaped clamping lever. Can be retrofitted: conversion to discharge via briquetting press briquetting press or rotary feeder possible. - High suction capacity - little space requirement - 100 % air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimum filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust bulkhead for dust-free container change - (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options ----- Technical data ----- Extraction nozzle Ø: 300 mm, Nominal volume flow: 5,089 m³/h, max. volume flow: 6,000 m³/h, max. negative pressure: 2,587 Pa, Filter area: 30 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, Iijdpfxeu R S A Re Alxef according to: GS - HO - 07 - new exhibition machine -

Condition: used, Clean air extraction HÖCKER-POLYTECHNIK Vacumobil EA 250-4 -ge Air filtration via filter bags, Motorized cleaning, Dust tested, Mobile collection bin ----- Technical specifications ----- Extraction nozzle Ø: 250 mm, Nominal air flow: 4,241 m³/h, Minimum air flow: 3,534 m³/h, Number of collection bags: 3 pcs, Motor: 4 kW, Dimensions (LxWxH): 2,500x1,280x2,500 mm, Isdpfx Asy R Upzslxjif Weight: 630 kg

Condition: excellent (used), Dusty air filter - self-cleaning Air flow rate: 20,000 maximum design Iisdpfjv Ny Emjx Alxjf Dimensions: 4000 x 2450 x h 8000 approximately Total filtering surface: 170 m2 Filters: in antistatic polyester fabric - new Filter cleaning system: air jet in backwash with regulation and control unit Filtered dust discharge system: motorized auger, star valve; discharge in big-bags Electric fan: Kw 30 Electric panel: with star/delta start (no inverter) Machinery checked, overhauled before delivery to the user

Condition: excellent (used), ALKO 200 clean air extraction unit with frequency converter – used Air filtration using filter hoses, Pneumatic cleaning system, Dust-tested, Movable collection container, Frequency converter, Pressure transmitter for demand-based control ----- Technical Data ----- Isdezg A N Eopfx Alxeif Extraction nozzle diameter: 200 mm, Nominal volume flow: 2,261 m³/h, Max. negative pressure: 2,446 Pa, Number of filter bags: 2, Motor: 4 kW, Compressed air connection: Max. 8.5 bar, Dimensions (L x W x H): 2,280 x 1,010 x 2,050 mm, Weight: 470 kg Quality information: - Complete basic inspection - Complete basic cleaning - Pneumatic system checked - Ready for immediate use