Used Resistance Soldering for sale (1,848)

Condition: used, Welding transformer, high-current transformer, transformer for spot welding machines, projection welding machines, seam welding machines ELREX type 3x ET70.0.G Serial No. Year of manufacture approx. 1990 Consisting of three water-cooled transformers with water-cooled rectifier block Performance data: Total power at 50% duty cycle: 210 kVA Secondary voltage: 7 - 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Primary connection: 380 volts, 50 Hz (three-phase) Consisting of three transformers – single transformer data: Power at 50% duty cycle: 70 kVA Secondary voltage: 7 - 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Secondary current at 50% duty cycle: 6.7 kA Primary connection: 380 volts, 50 Hz (two-phase) Cooling water requirement per transformer: 4 liters/min. Insulation class: F - Water-cooled transformer - Water-cooled rectifier block mounted on the secondary side - Direct current power output connection via contact surfaces 50x50 mm, thread M20x1.5 mm - Temperature monitoring at each rectifier element and each transformer coil - Connection cable: 7 cores, cross-section 50 mm², approx. 6 m long Overall dimensions (W x H x D): 700 x 710 x 440 mm Total weight: 480 kg In good condition Dedpfxsdzp Txe Addocr

Year of construction: 2007, condition: repair required (used), functionality: not functional, Belt width: 650 mm, usable height: 220 mm, heated length: 3250 mm. The furnace has 3 heating zones and a heating capacity of 125 kW. The furnace has been stored in a hall for several years, and many components need to be sandblasted and repainted. In addition, the interior of the furnace needs to be relined, and some parts need to be newly manufactured. The furnace can also be completely overhauled by us to meet current technical standards. Dcodpexdantefx Addsr

Year of construction: 2017, condition: used, functionality: unexamined, SMT reflow oven Condition as follows: - Transport OK - Needs cleaning - Basic functionality OK - Forced cooling not tested - Seals should be replaced and a new lambda probe is required Immediately available Dcjdpfx Aoxbp Nbsdder

Condition: used, cetisPV-GR / cetisPV GR / cetisPVGR, h.a.l.m. elektronik GmbH Network resistance Dodsq S Udujpfx Addjcr Model: cetisPV-GR Condition: Used

Condition: like new (used), Year of construction: 2022, Ex demo unit. Like new condition. Ask for additional details! Dcsdpfx Adow Dtgrsdor

Year of construction: 1997, condition: ready for operation (used), Seho 8040 PCS with laminar and turbulent wave, preheating with heating plates and IR radiator, minimum quantity flux system, component cooler at the outlet, wave width: 400mm, max. usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, solder nozzle: Delta B, max. wave height: 8mm, solder volume: 400kg, heating capacity solder pot: 9kW, heating-up time 20-250°C: approx. 150min, heating-up time 190-250°C: approx. 60min, preheating zone length: 700mm, three heating zones: 3x 3kW, max. preheating capacity: 9kW, transport angle: manually adjustable, 6-8°, transport speed: 0.5-2m/min, running direction: from left to right, with loading aid/slide conveyor (1000mm), unloading aid (500mm) and entry stopper for solder frame separation, exhaust connection diameter: 2x 150mm, extraction capacity per connection: 500m³/h, supply voltage (50Hz): 230/400V, rated power: 31,000W, total connected load: 18.5kW, compressed air connection: R 1/4 inch (6 bar), nitrogen connection: R 1/4 inch (6 bar). With microprocessor control PCS 96, alphanumeric display & membrane keypad (16 lines of 40 characters), 100 soldering programs, interface for host computer with visualized machine overview & BDE data backup, interface for BDE data acquisition via serial printer, control loop for transport and heating. Length: 2300mm, width: 825mm, height: 1615mm, weight without solder filling: 400kg. Dedpfx Adew Uk Aqjdjcr

Condition: used, Spot welding machine DALEX type SL 16 EA Machine No. 68611900-5 Year of manufacture: 1986 Rated power at 50% duty cycle: 16 kVA Maximum welding power: 50 kVA Throat depth: max. 500 mm Electrode force: max. 17 - 278 daN Electrode arm diameter: Ø 45 mm Dcedpfx Adowwaz Noder Electrode holder diameter: Ø 25 mm Arm spacing: 140 mm / 280 mm Power switch: 8 stages Control: 4 times with single and series spots Operating pressure: 1-6 bar Open circuit voltage: 1.8 to 3.6 volts Connected load: 37 kVA Electrical connection: 400 Volt, 50 Hz - Welding cycle initiated via electric foot switch - Welding time infinitely adjustable - Water-cooled Space required (L x W x H): 1100 x 600 x 1200 mm Weight: 200 kg Good condition

Condition: used, Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor Dcodpfx Aefm A Upoddjr -Manufacturer: RS/Arcol power resistor HS300 47R J -Type: 136-323 47R J -Power: 300 W -Dimensions: 180/70/H40 mm -Weight: 0.6 kg

Condition: like new (used), Year of construction: 2022, Machine like new condition. Ex demo machine. Djdsw Dr Tqspfx Addscr Ask for additional information!

Year of construction: 2016, condition: ready for operation (used), Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes. Dcodpfx Asn R Nhqsddor

Condition: used, Spot projection welding machine NIMAK type PMP 5 / 35 Spot welding machine, projection welding machine Make No. 88100 Year of construction approx. 1988 power at 50% ED 35 kVA throat 250 - 450 mm working stroke 40 mm electrode force 100 - 460 kp infinitely variable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insert electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of electrode holder 200 mm Connected load 83 KVA Mains connection 380 Volt, 50 Hz - 4-time control - stepless power adjustment - single points and series points - bouncing electrode guide - water cooled (without cooling unit) - electrical foot switch Dcodjhubgzopfx Addor space requirement L x W x H 1200 x 650 x 1500 mm weight 300 kg good condition

Condition: used, Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor, high-current resistor -Manufacturer: Ralakde high current resistor -Type: Test voltage 2.5 kV/34 Ohm/1.3-1,8 A -Number: 2x available -Price: per piece -Dimensions: 190/65/H85 mm Dodpfx Ajgqg H Hoddocr -Weight: 0.4 kg

Condition: used, Year of construction: 2011, Operational condition machine. Two pots. Variable Z system. One lead free (SAC 305) and one leaded (Sn63Pb37). If needed, the inner pot can also be made lead free with additional cost. Can be bought with nitrogen generator. Ask for additional details! Dcedpfx Aowzr Agsdder

Year of construction: 2009, condition: ready for operation (used), Connected load: 18kW, was overhauled in 2017, an inspection is possible. Dcjdpfxsn Htkte Addsr

Condition: used, Resistance module, switchgear, switching components Djdpodngv Ujfx Addecr -Type: ME2676S -Dimensions: 95/50/H75 mm -Weight: 0.15kg

Condition: used, Year of construction: 2008, Machine in operational condition, however due to its age, sold without warranty. Ask for additional details! Dsdpfxjwnfbvo Addscr

Year of construction: 2007, condition: ready for operation (used), Max. circuit board dimensions: 330x420-400x495mm, conveyor speed: 0-2.5m/min, an on-site inspection is possible. Dodpfx Asqy I Ntsddocr

Condition: used, Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor, high-current resistor Dcjdpfsgqg H Aox Addsr -Manufacturer: Ralakde high current resistor -Type: Test voltage 2.5 kV/34 Ohm/1.3 A -Number: 4x available -Price: per piece -Dimensions: 190/65/H85 mm -Weight: 0.4 kg

Condition: used, Year of construction: 2023, 2 systems available, one 2019 and 2023. Dcodpfx Adowcrdtjdjr Ask for additional information!

Condition: used, Power resistor, wire potentiometer, resistor, braking resistor, solid tube resistor -Manufacturer: Frizlen, power resistance -Type: FZDPQ 200x35 -Power: 450 W 4.0 ohms Dodpfsfmlduex Addjcr -Dimensions: 250/140/100 mm -Weight: 1.7 kg

Condition: used, Year of construction: 2006, -Spray fluxer -2x medium-wave preheating cassettes -1x dynamic preheater Dedpfx Adowcf Raedscr -1x bottom convection preheater -Dual wave with chip pre-nozzle + ERSA Power Wave - Cooling unit at the outfeed -Synchronous code reading system upstream of the soldering system -Roller buffer at the outfeed -Motor-driven infeed conveyor with chain Ask for additional information.

Condition: used, Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor, high-current resistor -Manufacturer: Ifo, 4 pieces EMF 50 6.8 ohms in series Dcjdpjgqg H Rjfx Addor -Dimensions: 200/50/H110 mm -Weight: 0.4 kg

Year of construction: 2009, condition: not inspected (used), Reflow oven in operational condition. R to L configuration with SMEMA. Dsdevfp Nmepfx Addscr Ask for additional information!

Condition: used, machine/vehicle number: 8830469, Starting resistor, series resistor, resistor -for testing large electric motors -Power: 125 A Dcjdpfsb Uhvmsx Adder -with control cabinet -3x amps display 250 amps -(technical data see photos) -Dimensions: 720/800/H1000 mm -Weight: 128 kg

Condition: used, Year of construction: 2013, Segment: Fluxer Storage space for flux canister under the fluxer Alcohol-based flux Segment: Preheating Medium-wave heating from below, convection from above Segment: Pre-warming 8 quartz radiators, controllable in groups of 4 Segment: Preheating + Divided Solder Pot Long-wave heating plate Solder nozzle with leaded solder, 1st section Solder pot with lead-free solder, 2nd section (out of operation) Availability in end of Q2 2025. Djdpfx Asv Sy Akeddecr Ask for additinal information!