Used Resistance Soldering for sale (1,893)

Condition: new, functionality: fully functional, Year of construction: 2026, Internal combustion forklift truck with a 3,500 kg lifting capacity Design and technology The forklift is equipped with reinforced load-bearing components, a durable frame, and a hydraulic system designed to operate under maximum load. The Nissan K25 engine is a proven power unit known for its high overload resistance and low fuel consumption. The Power Shift automatic transmission ensures smooth driving, increasing operator comfort and safety, especially during frequent direction changes. Pneumatic tires with increased diameter and deep tread perform exceptionally well on ramps, loading yards, and both paved and unpaved surfaces, effectively absorbing vibrations and reducing suspension wear. Precision and operational efficiency The side-shift mechanism allows horizontal fork movement, significantly reducing cycle time during storage and unloading operations. Manual fork spacing adjustment enables quick adaptation to different pallet sizes. Forward and backward mast tilt improves safety when handling heavy loads, facilitating precise placement and stabilizing the load during travel. Standard equipment Nissan K25 engine Side shift – lateral fork movement Mast tilt adjustment (forward/backward) Manual fork spacing adjustment Pneumatic tires LED work lights Reverse alarm and warning lights Technical data Load capacity: 3,500 kg Lift height: 3,000 mm Fork height (lowered): 40 mm Njdpfxoycvv Sj Adwjcl Fork length: 1,220 mm Side shift: Yes Mast tilt: Yes Engine: Nissan K25 Engine power: 50 HP Transmission: Automatic Travel speed (loaded/unloaded): 12 / 13 km/h Tire type: Pneumatic Overall length: 3,800 mm (L) Overall length without forks: 2,580 mm (L’) Wheelbase: 1,740 mm (L1) Distance from front axle to fork face: 487 mm (L2) Fork length: 1,220 mm (L4) Single fork width: 120 mm (W) Overall width: 1,225 mm (W1) Rear width: 970 mm (W2) Fork carriage width: 1,000 mm (W3) Outside fork spread: 1,060 mm (W5) Maximum lifting height: 3,000 mm (H) Overall mast height (lowered): 2,120 mm (H1) Overall mast height (raised): 4,250 mm (H2) Fork height above ground: 150 mm (H3) Overall height to overhead guard: 2,090 mm (H4) Mast ground clearance: 120 mm (H5) Ground clearance: 120 mm (H6) Load center distance: 500 mm (C) Rated capacity: 3,500 kg (Q) Single fork thickness: 40 mm (T) Mast tilt angle (forward): 6% (α) Mast tilt angle (backward): 12% (β) Weight: 4,700 kg

Condition: new, Year of construction: 2026, Tapping Head Spindle Positioner 90° CORMAK GT24 Ncjdpfx Ajycvfyodwsl The 90° GT24 tapping head spindle positioner is an advanced tool that significantly improves precision and efficiency in thread-cutting operations. Its main function is to ensure accurate alignment of the electric tapping machine at a 90° angle to the workpiece, allowing perfect spindle adjustment. Thanks to its innovative design, the GT24 positioner guarantees high accuracy and reliability, making it an essential accessory in any threading or machining workshop. Main Advantages of the GT24 Positioner Precise alignment: The positioner enables quick and accurate alignment of the tapping arm at a 90° angle to the workpiece, which is essential for achieving top-quality threads. Ease of use: The positioning process is quick and intuitive, saving time and increasing productivity. High stability: Thanks to its neodymium magnet, the positioner provides strong and secure attachment to the workpiece, minimising the risk of errors during threading. Compatibility: The GT24 positioner is compatible with a wide range of electric tapping machines available on our website, including models such as RGE30PW, RGE36PWx1200, and RGE36PWx1700. Robust construction: The GT24 positioner is made of high-quality materials, ensuring durability and resistance to intensive industrial use. Design and Technology of the GT24 Positioner The GT24 positioner features a sturdy construction designed for intensive use. Its key component is the neodymium magnet, which allows quick and reliable attachment to the workpiece. This technology gives users full control over accurate machine positioning, helping them achieve excellent results in less time. The unit also includes a 90° calibration system that allows precise setting of the tapping arm at a right angle. This setup enables quick adaptation to different threading tasks, making the GT24 a highly versatile and practical tool for any professional or production environment. Precision and Efficiency with the GT24 Positioner The GT24 positioner provides both precision and productivity. With its fast and simple positioning process, users can save valuable time otherwise spent on manual spindle adjustments. The alignment system ensures exceptional accuracy, resulting in better thread quality and reduced risk of machining errors. Furthermore, the positioner allows flexibility when working with various materials and thread types, making it an indispensable tool in production processes. Technical Specifications of the GT24 Positioner Type Neodymium adapter for spindle positioning Compatible with tapping machines RGE36PWx1200, RGE36PWx1700, RG24x1200, RG24PWx1200, RG24PWx1700, RG36PWx1200, RG36PWx1700 Angle range 90°

Condition: new, functionality: fully functional, Year of construction: 2026, Tilting Spindle Moulder CORMAK WS1000TA is a technologically advanced machine designed for professional woodworking in carpentry, furniture and production workshops. With a tilting spindle, a large cast iron table and a precise tool guidance system, the machine enables efficient and accurate machining of straight and profiled wooden components. Main advantages of the machine Tilting spindle from +5° to -45° – allows for bevels, rebates and special shapes to be machined. Large, heavy-duty cast iron table – ground and polished for smooth glide and work stability. Four-speed spindle control: 1,800 / 3,000 / 6,000 / 9,000 rpm – flexibility for various materials and tools. Rigid steel frame structure – ensures vibration damping and precision even under heavy load. Spindle stroke 100 mm and maximum tool diameter 180 mm – suitable for a wide range of cutters. Precise spindle and stop adjustment – enables accurate machining and dimensional repeatability. Easy tool change – optimised spindle access reduces setup time. Ncodpfx Adoycu Awewol Construction and technology The CORMAK WS1000TA spindle moulder is designed for durability and functionality in serial production. The machine body is made of thick-walled steel sheets, ensuring rigidity and resistance to deformation. The main table 1,000 × 360 mm and optional sliding table 1,000 × 240 mm allow efficient handling of long workpieces. The motor power 2.8kW (S1) / 3.9kW provides the energy needed for solid wood and wood-based materials machining. Precision and performance The machine allows for precise milling operations, including angular machining. The tilting spindle enables non-standard operations, while the accurate column spindle guide eliminates play and improves surface finish. The V-belt transmission ensures quiet and stable operation across the full speed range. Applications The CORMAK WS1000TA spindle moulder is ideal for: professional carpentry workshops, production of door and furniture components, machining of tenons, grooves, rebates and decorative profiles, angled and curved milling with a suitable attachment. Standard equipment 30 mm spindle Side and top pressure hold-downs Precision milling fence Curved milling attachment Angle stop User manual CE Declaration of Conformity Optional accessories* Sliding table (1,000 × 240 mm) – shown in the photos Mechanical feed systems Special protective covers and guiding systems *The price quoted applies to the machine only, excluding optional/additional equipment, installation, transport and training — please contact our consultant for more details. Technical data Spindle diameter [mm] 30 Spindle speed [rpm] 1,800 / 3,000 / 6,000 / 9,000 Spindle stroke [mm] 100 Table dimensions (L × W) [mm] 1,000 × 360 Sliding table dimensions (optional) [mm] 1,000 × 240 Table height [mm] 900 Max. cutter diameter [mm] 180 Spindle tilt [°] +5 to -45 Motor power [kW] 3.9 Motor power S1 100% [kW] 2.8 Weight [kg] 270 Warranty [months] 12 User manual included

Condition: new, Year of construction: 2026, functionality: fully functional, Tank container: 20-foot steel box container with integrated 25,700-liter polyethylene tank (wall thickness 1 cm). For non-hazardous products only (water, oils, alcohol, etc.), not suitable for ADR goods. Temperature resistance down to -40 degrees Celsius. 1. Condition: new, unused, with valid CSC plate 2. Volume: 25,700 liters 3. Decompression valve 4. Working pressure: 7 bar Ncjdpfoya E Dtsx Adwjl 5. Spare parts included: decompression valve, outlet valve, manhole cover 6. Custom color included 7. Company logo included 8. Tank removable 9. Available on pre-order 10. Transport: Free, non-binding delivery offer (including unloading upon request) – simply send your postal code. We look forward to hearing from you! MAGITU GmbH

Condition: new, Year of construction: 2026, Heavy-Duty CNC Lathe Series – Precision and Productivity The heavy-duty CNC lathe series guarantees high efficiency in powerful cutting operations combined with excellent machining accuracy. Our CNC Lathe 800 × 3000 is not just a machine—it is a reliable partner for both experienced professionals and those starting their journey in manufacturing. Its power and stability, supported by wide guideways, make it an indispensable solution for even the most demanding metalworking projects. CNC Lathe 800 × 3000 The CNC Lathe 800 × 3000 is a professional numerical control machine designed for high-precision metal machining in demanding industrial applications. Thanks to its rigid construction and advanced control systems, it delivers reliability and high productivity in both serial and single-piece production. CNC Control – Siemens Sinumerik 808D Siemens Sinumerik 808D is a cost-effective CNC control system dedicated to entry-level CNC lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Intuitive operation – Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability – Rugged design resistant to dust and moisture ensures stable operation in harsh workshop environments. Compatibility – Designed for machines with standard requirements, offering seamless integration with SIEMENS servo drives. Cost optimization – Low energy consumption and minimal maintenance requirements make it ideal for first-time CNC users. Technical Specifications – CNC Lathe 800 × 3000 Distance between centers: 3000 mm Maximum turning diameter: 800 mm Ncodpfx Adjycrz Rewjl Maximum turning diameter over cross slide: 520 mm Bed width: 600 mm Spindle bore: 104 mm (130 mm optional) Spindle speed range: 22–108 / 60–300 / 240–1200 rpm Maximum X/Z axis travel: 420 / 1350, 2850 mm Rapid traverse X/Z: 4 / 8 m/min Positioning accuracy: 0.03 / 0.04 mm Repeatability X/Z: 0.012 / 0.02; 0.025 mm Tailstock quill diameter: 100 mm Maximum tailstock quill travel: 250 mm Tailstock taper: MT5 Number of tools: 4 (6 or 8 optional) Tool size: 32 × 32 mm Maximum load capacity: 1700 kg Main motor power: 15 kW Machine weight: 8700 kg Machine dimensions (L × W × H): 5200 × 2540 × 1860 mm Standard Equipment Fully enclosed working area 4-station tool post 320 mm 3-jaw chuck Chuck and manual tailstock Fanuc or Siemens CNC control Coolant system Machine lighting

Condition: new, functionality: fully functional, Year of construction: 2026, The high-performance CBN borazon grinding wheel designed for the CORMAK DG20M drill sharpener is a key component ensuring precise sharpening of drills made of HSS high-speed steels and cobalt steels. It offers exceptional durability and accuracy essential in daily operations of toolrooms, mechanical workshops or maintenance departments. Main advantages of the DG20 grinding wheel Nsdpeycq Hrjfx Adwscl High hardness and thermal resistance thanks to the CBN (borazon) abrasive material. Compatibility with the CORMAK DG20M sharpener – a wheel designed for this model guarantees perfect fit and maximum efficiency. Vibration-free operation due to precise balancing – reduces the risk of tool damage and improves user comfort. Long service life – significantly reduced replacement frequency and lower operating costs. Stable geometry – no need for frequent shape correction, enabling consistent sharpening quality. Construction and technology The grinding wheel for the CORMAK DG20M drill sharpener is manufactured with CBN technology – borazon is one of the hardest abrasive materials known, ideally suited for machining high-speed steel tools. Thanks to precise workmanship and an optimised profile, the wheel ensures high sharpening efficiency while minimising material loss from the tool. Precision and work efficiency The use of an original CBN wheel in the CORMAK DG20 model provides excellent results even during long operating cycles. The wheel maintains an accurate point angle (within 90–135°), which affects cutting quality, reduces cutting forces and increases the service life of sharpened drills. Its vibration-damping properties minimise the risk of micro-chipping on cutting edges. Choose quality – select the original DG20M grinding wheel The CBN wheel for the CORMAK DG20M sharpener is an essential component for anyone who expects precision and reliability during drill sharpening. Thanks to its construction, material and perfect fit to the machine, it delivers long-lasting, efficient and repeatable operation. Order the original wheel today and keep your sharpener in full working condition.

Condition: new, Year of construction: 2026, functionality: fully functional, CBN Borazon Grinding Wheel for CORMAK DG13M Drill Sharpener – precise and durable grinding disc High-quality CBN borazon grinding wheel dedicated to the CORMAK DG13M drill sharpener is a consumable element that directly affects sharpening quality and the service life of cutting tools. It ensures precise HSS drill sharpening across the full range handled by the machine. Its construction is optimised for demanding workshop and industrial conditions, offering high efficiency and minimal abrasive wear. Main product advantages Dedicated to the CORMAK DG13M sharpener – ensures perfect fit and optimal operating parameters. CBN (borazon) abrasive material – optimal for sharpening HSS high-speed steel tools. Vibration-free operation – high dynamic balance of the wheel eliminates vibrations and improves sharpening quality. Nodpfoycqt Sox Adwecl High durability – significantly outlasts standard aluminium oxide wheels. Stable sharpening parameters – ensures repeatability and accuracy even during series regeneration of drills. Construction and technology CBN wheel (Cubic Boron Nitride) is the second hardest abrasive material after diamond, yet far more resistant to temperature and wear when working with HSS steel. The specialised bond and precise geometry make it ideal for applications in sharpeners such as the CORMAK DG13M, where edge accuracy and long tool life are essential. The wheel is optimised for direct mounting on the machine spindle axis, ensuring minimal runout and reliable grinding performance. Precision and work efficiency The use of a CBN wheel in drill sharpeners such as the DG13M results in significantly improved operating parameters: shorter sharpening time, lower tool temperature and reduced risk of burning. The high rigidity of the abrasive allows for a uniform and sharp cutting edge while maintaining the correct rake angle and drill geometry. This makes drill sharpening more repeatable and efficient. Ensure the highest sharpening quality – choose a grinding wheel for the CORMAK DG13M sharpener Replacing a worn wheel with the original CBN borazon grinding wheel ensures optimal sharpening quality in drill sharpeners. Thanks to the wheel’s high efficiency and durability, you minimise downtime and improve process performance. Order now and restore full precision to your CORMAK DG13M drill sharpener!

Condition: new, Year of construction: 2026, The CORMAK WP400 self-centring 3-jaw pipe chuck is a high-quality accessory designed for use with welding positioners and welding rotators. It enables quick and stable clamping of cylindrical or hexagonal workpieces with diameters ranging from 120 to 380 mm. Thanks to its robust design and high clamping force, the chuck ensures reliability and precision essential for automatic and semi-automatic circumferential welding processes. Main advantages of the WP400 chuck Wide clamping range – allows clamping of workpieces with diameters from 120 to 380 mm, ensuring versatility for both series and single-piece production. Self-centring 3-jaw mechanism – guarantees fast and accurate alignment of the workpiece along the rotator axis. High clamping force – 350 kg – enables safe clamping of heavy components during dynamic rotation. Compatible with welding positioners – perfectly matches welding rotators and other welding support equipment, allowing full utilisation of their capabilities. Stable and durable design – engineered for long-term use in demanding industrial conditions. Design and technology The WP400 model features a precise, mechanically synchronised clamping system that ensures the workpiece is always perfectly centred on the rotational axis. The three independently moving jaws are made of hardened steel, resistant to wear and deformation. A large through-hole of ⌀170 mm allows for the passage of tubular workpieces, while the load capacity of 240 kg provides safe handling of heavy components. Precision and performance The WP400 chuck minimises setup time, increasing overall workstation efficiency. The self-centring system eliminates positioning errors and improves the quality of circumferential welds. Its rigid construction ensures stability during automatic or semi-automatic welding cycles, even under high loads. Applications The WP400 chuck is designed for industrial facilities using welding positioners, welding rotators, and other devices supporting welding processes. It is ideal for clamping pipes, sleeves, flanges, and other components requiring rotational welding. With its high clamping force and load capacity, the WP400 is suitable for both light and heavy-duty production environments. Nedpfxoycqpyj Adwjcl Technical parameters Model WP-400 Max clamping force 350 kg Max load capacity 240 kg Through-hole diameter ⌀ 170 mm Clamping range ⌀ 120–380 mm

Condition: new, Year of construction: 2026, The WP300 self-centering three-jaw chuck is a specialist accessory designed for clamping pipes and workpieces with cylindrical or hexagonal cross-sections in welding positioners and welding rotators. Thanks to its precise self-centering clamping mechanism, it ensures secure and accurate positioning of the workpiece during rotation, which results in higher quality and repeatability of the welding process. Key advantages of the WP300 chuck Precise self-centering mechanism – enables quick and accurate centering of pipes and workpieces, eliminating the need for manual positioning. High versatility – compatible with many welding rotators and positioners, including models PS310, PS320, and PS360. Stable clamping – thanks to three independent jaws, the workpiece remains securely clamped even at high rotational speeds. Ncodpfx Adeycqptswsl Robust construction – made of high-grade materials resistant to vibration, loads, and harsh welding environments. Optimal working diameter – the ability to clamp pipes up to 270 mm in diameter allows for a wide range of applications. Design and technology The WP300 model features a compact and durable steel construction designed for intensive operation. The three-jaw mechanism operates synchronously, automatically positioning the workpiece on the axis of rotation. The large outer diameter (300 mm) and the through bore (100 mm) allow for handling a wide range of workpiece dimensions. The mounting holes are designed to ensure full compatibility with CORMAK welding positioners. Precision and efficiency The WP300 chuck provides high clamping repeatability, which translates into precise circumferential welds. It shortens workpiece preparation time and reduces setup errors, increasing production efficiency and improving operator safety. The solid construction ensures stable operation even under dynamic loads. Applications The WP300 chuck is intended for use in circumferential welding processes, particularly in manufacturing plants, metalworking workshops, and companies involved in steel structure prefabrication. It is used with welding rotators and welding positioners, enhancing their functionality and versatility. Technical data Max. pipe diameter: 270 mm Outer diameter: 300 mm Inner diameter (through bore): 100 mm Mounting hole spacing: 105 mm Bolt hole diameter: 9 mm For welding positioners: PS310, PS320, PS360 Weight: 14 kg

Condition: new, Year of construction: 2026, The WP200 self-centring 3-jaw chuck is a professional accessory designed for use with welding positioners and welding rotators such as models PS310 and PS320. Its precise clamping mechanism allows quick, stable, and concentric fastening of pipes and cylindrical or hexagonal parts, significantly improving the efficiency and safety of circumferential welding. Main advantages of the WP200 chuck Self-centring 3-jaw mechanism – ensures even and stable clamping of workpieces regardless of their shape. Versatility – compatible with most welding rotators and welding positioners, including CORMAK PS310 and PS320. Clamping precision – perfect alignment of workpieces translates into better weld quality and smooth rotation. Durable construction – robust body made from high-strength materials resistant to heavy mechanical and thermal loads. Compact size and easy installation – low weight and precisely positioned mounting holes ensure quick integration with welding equipment. Nodpfx Adjycqnvjwjcl Design and technology The WP200 chuck features three high-quality jaws designed to automatically centre the workpiece on the rotational axis. Its outer diameter of 200 mm and inner diameter of 80 mm allow clamping of workpieces up to 170 mm in diameter. The body is made of high-grade steel, providing excellent resistance to deformation during long-term use. Precision and efficiency The WP200 self-centring 3-jaw mechanism significantly reduces setup time for welding operations. The elimination of backlash and positioning errors directly improves the quality of circumferential welds. Stable clamping of workpieces also enhances operator safety during welding. Applications The WP200 chuck is designed for use with welding rotators, welding positioners, and welding manipulators in operations involving pipes, flanges, rings, and cylindrical components. It is ideal for welding workshops, manufacturing plants, and the steel construction industry. Technical parameters Max pipe diameter: 170 mm Outer diameter: 200 mm Inner diameter: 80 mm Mounting hole spacing: 85 mm Mounting hole diameter: 9 mm For welding positioner: PS310, PS320 Weight: 10 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Beam extensions for gantry cranes – increase the reach of your crane Beam extensions are professional accessories for gantry cranes that allow you to increase the working width of the structure. They are used wherever the standard crane width is insufficient – particularly in wide production halls, warehouses and industrial facilities. Manufactured from durable and resistant materials, they ensure reliability and long service life even in intensive working environments. Greater functionality and safety Nsdpfxoycqh Nj Adwocl The extensions allow for easy adaptation of the crane to individual requirements, expanding its range of applications without the need to purchase a larger model. The maximum lifting capacity of the crane with extensions is 800 kg. However, it should be noted that when the extension exceeds 200 mm, the load capacity is further reduced. For this reason, it is essential to follow the manufacturer’s guidelines and carry out regular technical inspections of all crane components, including the extensions. Key product features: Enable quick and safe increase of the crane’s working width Simple installation – the set includes two extensions ready for mounting Robust construction – high-strength steel profiles Operational safety – compliant with industrial standards and health and safety requirements Compatible with CORMAK gantry cranes and other structurally compatible models Usage guidelines: Gantry crane extensions should be used in accordance with the manufacturer’s recommendations, particularly with regard to the reduction in load capacity after installation. The minimum extension width is 200 mm, and each additional increase results in a further reduction of the maximum lifting capacity. Regular technical inspections and proper maintenance are essential to ensure full operational safety. Applications of beam extensions The product is ideally suited for industries such as logistics, industrial manufacturing, steel structure assembly, the automotive industry and others. Versatility, durability and build quality make it an excellent choice for companies that expect flexibility and reliability from their equipment. By choosing CORMAK beam extensions, you invest in efficiency, functionality and safety. Extend the capabilities of your gantry crane and adapt it to changing production or warehouse requirements! Technical parameters: Length 520 mm Width 131 mm Height 70 mm Number of pieces per set 2 Set weight 20 kg

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Double sided quick lock vice In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Size of the cutting band 3160 x 27 x 0.9 mm Belt tension mechanical (manual) Nodpfx Adoycqhcjwjcl Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Power 3phase, 400V Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Dimensions with base 1850x950x1500 (2050) mm Weight 491 kg

Condition: new, Year of construction: 2026, Drill Vice 100mm IW100 is a precision, load-resistant vice for drilling and milling machines, designed for stable clamping of workpieces during drilling, light milling and fitting operations. The cast steel body provides high rigidity, while the ergonomic base with four mounting slots enables quick and repeatable positioning on machine tables. Main advantages of the IW100 drill vice Increased rigidity thanks to a monolithic cast steel body. Precise jaw guidance ensuring stable holding of workpieces during machining. Wide 100mm jaws allow clamping of various workpiece sizes. Maximum opening of 105mm increases versatility of use. Multi-point mounting – base with four elongated grooves for quick and secure positioning on a workbench. Wear resistance even under intensive use. Construction and manufacturing technology The IW100 drill vice series uses a solid cast steel body, providing excellent stability and resistance to vibration generated during drilling or light milling. The jaws are linearly guided, ensuring parallel alignment and consistent positioning. The base features grooved mounting surfaces and four elongated slots, allowing precise setup on bench drills, conventional milling machines and metalworking tables. Precision and performance The IW100 drill and milling vice minimises play and unwanted deformation, ensuring smooth tool movement and high dimensional accuracy. Stable clamping of the workpiece shortens setup time, supports machining repeatability and reduces errors caused by improper positioning. Applications The 100mm drill vice is suitable for use in: mechanical and metalworking workshops, maintenance departments, toolrooms, operations such as drilling, counterboring, tapping and light milling. Ncjdpsycqfzofx Adwsl This versatile vice for drills and milling machines is intended for users seeking stability, precision and long-term durability. Standard equipment Cast steel vice body Set of clamping jaws Base with four elongated mounting slots Lead screw with handle Technical data – Drill Vice IW100 Jaw width 100mm Jaw height 20mm Maximum opening 105mm Mounting hole spacing 133mm Mounting hole width 13mm Body material cast steel Base grooved, 4 elongated mounting slots

Condition: new, Year of construction: 2026, The 150mm Drill Vice IW150 has been designed for stable and secure clamping of workpieces during drilling, light milling and other workshop operations. The solid steel and cast steel construction, large opening and optimised jaw geometry ensure high rigidity and repeatability of clamping. This is a reliable drill vice that also works perfectly as an auxiliary milling vice for additional workshop applications. Ncjdpjycqfhjfx Adwsl Main advantages of the IW150 drill vice Jaw width 150mm – enables secure clamping of larger workpieces and irregular shapes. Maximum opening 150mm – allows machining of a wide range of parts without additional fixtures. Cast steel body – ensures high resistance to continuous operational loads. Stable table mounting via elongated mounting slots with 160mm spacing. High structural rigidity reducing micro-vibrations during use on bench drills and auxiliary milling machines. Construction and technology The vice features a precisely machined body made of durable cast steel, characterised by excellent dimensional stability and resistance to deformation. The key functional components – guides and jaws – are made of high-quality steel, ensuring durability and wear resistance. The screw feed mechanism is optimised for smooth adjustment, allowing quick, backlash-free positioning and consistent clamping pressure. The base of the vice includes elongated 13mm mounting slots, allowing precise adjustment to different machine table layouts. Thanks to this, the IW drill vice series guarantees compatibility with a wide range of workshop machines. Precision and performance The construction parameters of the IW150 vice ensure stable clamping even during intensive machining. The flat base surface and parallel jaw alignment minimise workpiece movement, which is crucial for maintaining dimensional repeatability. The overall weight of approx. 4.2kg helps absorb vibration, improving drilling and machining accuracy. Applications The IW150 drill vice is ideal for professional metalworking facilities and maintenance departments. Its universal design allows use as: bench drill vice – for precise clamping during drilling, reaming and counterboring, milling vice – for light milling and auxiliary operations, a general-purpose clamping fixture in mechanical and metalworking workshops for routine machining and assembly tasks. Standard equipment Cast steel body Flat steel jaws, 150mm wide Elongated mounting slots for position adjustment Reinforced screw mechanism Technical data – Drill Vice IW150 Material steel, cast steel Jaw width 150mm Jaw height 24mm Maximum jaw opening 150mm Mounting hole spacing 160mm Mounting hole width 13mm Weight approx. 4.2kg

Condition: new, Year of construction: 2026, Drill Vice 125mm IW125 is a precise and robust vice for both drilling and milling operations, designed for stable clamping of components in demanding machining processes. The cast steel body guarantees excellent rigidity, while the wide jaws and large opening allow flexible operation with components of various sizes. The grooved base with four elongated mounting slots enables quick installation and reliable positioning on the machine table. Main advantages of the IW125 drill vice Ncjdpfx Adeycqd Dswjl Wide 125mm jaws for stable clamping of larger workpieces. Maximum opening 125mm – suitable for a wide range of components. Cast steel body ensuring high resistance to bending, vibration and dynamic loads. Precise jaw guidance minimising the risk of displacement during machining. Grooved base with four elongated mounting slots for quick and repeatable installation on machine tables. Wear resistance even under intensive industrial use. Construction and manufacturing technology The IW125 drill vice is made of high-quality cast steel, characterised by excellent mechanical strength and resistance to deformation under load. The body design ensures optimal rigidity during drilling and light milling operations. The jaws are guided along ground surfaces, maintaining parallelism and repeatable clamping. The durable lead screw ensures smooth clamping action, minimising axial play and allowing precise adjustment of the clamping force. Precision and performance The precision of manufacture directly translates into machining stability. The rigid construction reduces vibration, improving surface quality, dimensional accuracy and tool life. With a large jaw opening and parallel guidance, the IW125 vice enables fast setup, reducing the need for additional clamps. This results in higher productivity and consistent machining results. Applications The IW series drill vices are designed for professional workshop use. The IW125 model is ideal for: metalworking and mechanical workshops, toolrooms and prototype departments, small-batch and series production operations, drilling, tapping, counterboring and light milling operations. This versatile vice for drills and milling machines is designed for users seeking long-lasting precision and reliability. Standard equipment Cast steel vice body Hardened jaws Lead screw with handle Grooved base with four elongated mounting slots Technical data — Drill Vice 125mm IW125 Jaw width 125mm Jaw height 24mm Maximum opening 125mm Mounting hole spacing 155mm Mounting hole width 13mm Body material cast steel Base grooved, 4 elongated mounting slots

Condition: good (used), Stratasys Objet Model: Objet350 Connex3 + SUT70 USFL SOLO + WATER JET Technical Specifications: Build Volume: 342 × 342 × 200 mm Layer Thickness: 0.016 / 0.030 mm Resolution: Nodpfx Aox A S Atsdwjcl X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Dimensions and Weight: 1400 × 1260 × 1100 mm; 430 kg Cleaning Station SUT70 approx. 580 x 605 x 800 mm, 70 kg Materials: Rigid and opaque: VeroPureWhite™, VeroWhitePlus™, VeroBlackPlus™, VeroGray™, VeroBlue™, VeroCyan™, VeroMagenta™, VeroYellow™ Elastomeric: Agilus30™, TangoPlus™, TangoBlackPlus™, TangoBlack™, TangoGray™ Transparent: VeroClear™ and RGD720 Polypropylene-like materials: Rigur™ and Durus™ Temperature-resistant & biocompatible SHR print head system PolyLog material management system Incl. digital color options (more than 500,000) GrabCAD Print software Incl. OBJET 350 Connex3 support package Condition: used Last inspection 2024! Scope of delivery: (see photo) (Specifications and data subject to change and errors excepted!) If you have any further questions, please feel free to contact us by phone.

Condition: like new (used), Year of construction: 2023, x-travel 4216,0 mm y-travel 2007,0 mm z-travel 305,0 mm control CNC table-size 4902,0 x 2134,0 mm max. workpiece weight 1465 kg / m² machine weight ab. 2500 kg total power requirement 30 kW dimensions of the machine ca. 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel high-pressure pipes - MAXIEM direct pump M4050 - OMAX Intelli-MAX PC control software for MAXIEM - OMAX PC control software Intelli-MAX Premium - Cutting head technology based on the A-Jet 5-axis angular cutting head - Height sensor for the A-Jet 5-axis angle cutting head - Laser pointer as a positioning aid - Automatic desludging system MBM ASAS-ME - Compressed air injection for the MBM ASAS-ME automatic desludging system - Clamping and fastening set for sheet material and material holders - Collecting grid in the cutting basin - Sensors for automatic monitoring of the cutting process - Water treatment through water conditioning incl. water analysis Nsdpfxjyclvno Adwocl - Omni-Start drilling aid (Vacuum Assist) for brittle and laminated materials

Condition: new, Year of construction: 2025, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: Ncjdpfx Aoq Nf Uwodwol 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2025, A coal ball mill, also known as a coal grinding mill, is a type of grinder used to grind and blend materials for use in mineral dressing processes, paints, pyrotechnics, ceramics, and selective laser sintering. It is a cylindrical device used to grind or mix coal, ores, chemicals, and other materials mechanically. Here are key features and aspects of a coal ball mill: 1. Cylindrical Structure: - The coal ball mill typically consists of a horizontal cylindrical shell. The inner surface of the shell is usually lined with abrasion-resistant material such as steel or rubber to protect it from wear. 2. Grinding Media: - Grinding media, such as steel balls or ceramic balls, are placed inside the coal ball mill to assist in the grinding process. The rotation of the mill causes the grinding media to cascade and grind the coal particles. 3. Coal Feed and Discharge: - Coal is typically fed into the mill through a central feed pipe, and the ground coal particles are discharged through a discharge end. The size of the coal particles is reduced during the grinding process. 4. Rotational Motion: - The coal ball mill rotates on its horizontal axis. The rotation of the mill is controlled by a motor, and the speed can be adjusted to control the grinding process and particle size. 5. Air Sweeping: - Some coal ball mills incorporate an air-swept design. Air is introduced into the mill to facilitate drying and transport of the pulverized coal out of the mill. This design helps in controlling the moisture content of the coal and aids in the grinding process. Njdpfx Asq Nf U Eodwocl 6. Drying and Grinding: - In addition to grinding, the coal ball mill may also have a drying function. This is particularly important if the coal being processed contains moisture. The drying and grinding functions are often achieved simultaneously in some coal mills. 7. Control System: - Modern coal ball mills are equipped with control systems to monitor and regulate key parameters such as mill speed, feed rate, and temperature. This allows for optimization of the grinding process and efficient coal processing. 8. Application: - Coal ball mills are commonly used in coal-fired power plants and other industries where coal is used as a fuel. They are part of the coal pulverization system, which grinds coal into fine powder for combustion in boilers. 9. Safety Features: - Safety features, such as monitoring devices and emergency shutdown systems, are often incorporated into coal ball mills to ensure safe operation. 10. Wear Protection: - Wear-resistant materials are used in critical areas of the coal ball mill to withstand the abrasive nature of coal and extend the life of the mill components. Coal ball mills play a crucial role in coal pulverization processes in power plants, contributing to the efficient combustion of coal for electricity generation. The specific design and features of coal ball mills can vary among different manufacturers and applications.

Condition: new, power: 30 kW (40.79 HP), overall weight: 6,000 kg, Year of construction: 2025, Applications of Our Sand & Gravel Solutions Our stone crusher systems are being used globally across a wide variety of projects, including: Road and highway construction Concrete production plants Railway ballast production Landscaping and drainage Infrastructure development Recycling applications Building waste recycling, construction waste management, construction and demolition debris recycling and management. Our Range of Stone Crusher Solutions We understand that every sand and gravel project is unique. That's why we offer a variety of stone crushers, each tailored to different material types, capacities, and final product sizes. 🛠️ Jaw Crushers Perfect for primary crushing, our jaw crushers handle large rocks and break them down into smaller, manageable pieces. They are known for: High reduction ratios Rugged construction Easy maintenance Versatile applications 🛠️ Cone Crushers When you need finely crushed material, cone crushers are your go-to solution. Ideal for secondary and tertiary crushing, they deliver: Uniform product size Superior cubicity High capacity Excellent wear resistance 🛠️ Impact Crushers If you’re handling softer, non-abrasive materials or recycling concrete and asphalt, our impact crushers are the ideal choice. They offer: High-speed crushing Shape optimization Adjustable output size Easy mobility (in some models) 🛠️ VSI (Vertical Shaft Impact) Crushers For top-tier manufactured sand production, VSI crushers offer the precision you need. They deliver: Consistent sand shape and size Energy efficiency Superior fines production Low operating costs 🛠️ Screening and Conveying Systems No crushing operation is complete without effective screening and material handling. Our solutions include: Vibrating screens Njdpsq Igumsfx Adwecl Conveyor belts Washing systems

Condition: new, functionality: fully functional, Year of construction: 2025, The VSI (Vertical Shaft Impactor) sand making machine is a type of crusher designed to accelerate the crushing of aggregate and produce cubical-shaped sand. It is widely used in the field of construction, mining, and other similar industries. Here are key features and information about VSI sand making machines: 1. Working Principle: Ncedpeq Nd U Hefx Adwol - The VSI sand making machine operates on the principle of stone impacting stone or stone impacting iron. Material is fed into the center of the rotor, which accelerates to high speed to throw the material outward against a wear-resistant lining. 2. Rotor and Crushing Chamber: - The rotor is a crucial part of the VSI machine and is often designed with multiple pockets to facilitate material throwing and crushing. - The crushing chamber is lined with wear-resistant materials to endure the impact and abrasion during the crushing process. 3. Feedstock Control: - The feedstock (material to be crushed) can be controlled using a variable speed control system, allowing for adjustments to achieve the desired particle size. 4. Material Types: - VSI machines are suitable for processing various materials, including hard and abrasive materials such as rocks, ores, and minerals. 5. Cubical Shaping: - One of the significant advantages of VSI machines is their ability to produce cubical-shaped end products, which is desirable for high-quality concrete and asphalt production. 6. Adjustable Discharge: - The machine usually has an adjustable discharge opening, allowing for customization of the final product size. 7. Sand Production: - VSI sand making machines are primarily used to produce manufactured sand (M-sand) and crushed sand, which are essential components in the construction industry. 8. Maintenance: - Regular maintenance is required to ensure optimal performance and extend the machine's lifespan. This includes checking wear parts, lubrication, and addressing any issues promptly. 9. Variations: - Different manufacturers may offer variations of VSI machines with unique features or specifications. Common variations include open rotor and closed rotor designs. 10. Environmental Considerations: - VSI sand making machines are generally considered environmentally friendly as they produce less dust and noise compared to traditional crushers. 11. Manufacturers: - Well-known manufacturers produce VSI sand making machines, and it's crucial to choose a reputable supplier with a track record of providing reliable equipment. When considering a VSI sand making machine, factors such as feed size, capacity, and the desired end product specifications should be taken into account. Additionally, check the reputation of the manufacturer, and consider customer reviews and feedback regarding the specific model you are interested in.

Condition: new, Year of construction: 2025, power: 300 kW (407.89 HP), A ball mill is a key equipment in the grinding process of barite. It is designed to grind and blend solid or hard materials into smaller pieces, particularly powder. In a barite grinding plant, ball mill is often used for grinding barite into an ultrafine powder for various applications. Here are key features and aspects of a ball mill used for barite grinding in a plant: 1. Mill Structure: - The ball mill for barite grinding typically consists of a horizontal cylindrical shell with ends that are flanged and bolted on. The ends may contain openings for feeding and discharging the barite. 2. Grinding Media: - Steel or ceramic balls are commonly used as grinding media in the ball mill. The grinding media helps in the grinding process by reducing the size of the barite particles. 3. Rotation: - The mill rotates on its horizontal axis. The rotational motion of the mill, driven by a motor, causes the grinding media to cascade and grind the barite. 4. Feed and Discharge: - Barite is typically fed into the ball mill through a hopper or a conveyor. The ground barite particles are discharged from the mill through a discharge end. 5. Control System: - Modern ball mills are equipped with control systems to monitor and regulate critical parameters, such as mill speed, feed rate, and temperature. This allows for precise control of the grinding process. 6. Size Reduction: - The primary purpose of the ball mill is to reduce the size of barite particles. Grinding occurs as the barite is subjected to the impact and friction forces of the grinding media. 7. Classification: - Depending on the desired fineness, a classification system may be integrated into the ball mill to separate fine particles from coarse ones. This ensures that the final product meets the required specifications. 8. Dust Collection: - A dust collection system may be incorporated to capture and collect fine particles generated during the grinding process, ensuring a clean and safe working environment. 9. Liners: - The interior of the ball mill is often lined with wear-resistant materials, such as steel or rubber, to protect the mill shell from abrasion and ensure longer equipment life. Nodpfx Asq Ngafjdwscl 10. Application in Barite Processing: - The ball mill in a barite grinding plant is a crucial piece of equipment for processing barite ore into a fine powder. This powder is used in various industries, including oil and gas drilling, coatings, and pharmaceuticals. 11. Safety Features: - Safety features, such as monitoring devices and emergency shutdown systems, are typically incorporated into ball mills to ensure safe operation. The specific design and features of a ball mill for barite grinding can vary among different manufacturers and applications. It is essential to follow proper procedures and guidelines for the operation and maintenance of the equipment to ensure optimal performance and longevity.

Condition: new, fuel type: electric, Year of construction: 2025, machine/vehicle number: 2700x4500, Equipment: low noise, Main Technical parameters of the ball mill Drum diameter: 2400mm Drum length: 4500mm Motor power: 320KW Ncsdoq Igiiopfx Adwjl Max input size: 25mm Capacity:35-60 t/h Weight: 72Tons Ball loading: 30Tons Besides this model, we also have the other models like 2700x4500, 3200x4500, 1830x13000mm, and so on, and we can also offer customerization service, we can also provide complete grinding solution for various industries like cement, quartz, ore beneficiation plant, and so on, welcome to contact us for more info. A ball mill is a common grinding machine used to grind and blend materials for use in mineral processing, including ore mining and the production of silica (silicon dioxide). When it comes to ore mining and silica grinding, the characteristics of the ore and the final product requirements will play a crucial role in selecting the appropriate ball mill. Here are some considerations for using a ball mill in ore mining and silica grinding: 1. Ore Characteristics: - Hardness: The hardness of the ore determines the type of ball mill that is most suitable. Harder ores may require a more robust and wear-resistant ball mill. - Particle Size Distribution: The initial particle size of the ore affects the grinding process. Different ores may require different approaches to achieve the desired particle size. 2. Silica Grinding: - Silica Content: If the primary goal is to grind silica, it's important to consider the initial silica content and the desired final particle size. Silica grinding often requires special attention to prevent excessive wear on the milling equipment. 3. Ball Mill Type: - Overflow vs. Grate Discharge: The type of discharge from the ball mill can impact the final product and the grinding efficiency. Overflow mills are generally used for most grinding applications, while grate discharge mills are more suitable for certain types of ores. 4. Mill Size and Capacity: - Mill Diameter and Length: The size of the ball mill should be selected based on the amount of material to be ground and the desired throughput. - Capacity: Ensure that the chosen ball mill has the capacity to handle the required volume of material efficiently. 5. Grinding Media: - Material and Size: The choice of grinding media (balls or cylpebs) and their size depends on the hardness of the ore and the desired final particle size. Different grinding media materials can impact the purity of silica during grinding. 6. Liners and Lifting Aids: - Liners: Consider the type of liners used in the ball mill to protect the shell and optimize the grinding process. - Lifting Aids: Some mills use lifting aids to enhance the grinding action and promote better mixing of the material. 7. Control and Monitoring Systems: - Automation: Utilize control systems to automate the milling process and ensure optimal performance. - Monitoring: Regularly monitor the milling process to adjust parameters as needed for consistent and efficient operation. 8. Safety Measures: - Safety Systems: Implement safety features to protect personnel and equipment during operation. Always follow the manufacturer's recommendations and guidelines for operation and maintenance to ensure safe and efficient use of the ball mill in ore mining and silica grinding applications.

Condition: new, Year of construction: 2026, Hydraulic guillotine shears are advanced machines designed for precise cutting of metal sheets of various thicknesses and hardness. Thanks to the hydraulic drive, they provide high pressing force, enabling efficient processing of even the most demanding materials. Their solid construction and modern control systems ensure accuracy, repeatability, and safe operation. These machines are indispensable in industrial plants and workshops specializing in metal processing. Max. sheet thickness (S235): up to 12.0 mm Max. sheet length: 3200 mm Cutting angle: 2° Strokes per minute: 6–20 Back gauge travel: 600 mm Motor power: 15 kW Ncsdoych Imopfx Adwol Length: 4000 mm Width: 2100 mm Height: 2100 mm Weight: 9500 kg Equipment: Rear gauge driven by electric motor (on ball screws) Hydraulic sheet clamps along the entire cutting length Adjustable blade gap Ball guides on the table for sheets Work area lighting Front supports Mobile foot controller The rear ramp is equipped with ball guides, ensuring smooth and precise movement of cut pieces. This prevents any material fragments from remaining on the machine, improving efficiency and safety. Using steel tubes in the hydraulic system instead of flexible rubber hoses significantly increases system tightness and minimizes the risk of leaks in the future. Thanks to their rigidity and resistance to mechanical damage, steel tubes provide durability and reliability of hydraulic connections. With the mobile controller and the control unit mounted on a movable arm, the operator has complete freedom of movement throughout the machine’s working area. Additional LED lighting and a laser indicator provide excellent visibility of the workpieces, enhancing precision and comfort under any working conditions.

Condition: new, Year of construction: 2026, Hydraulic guillotine shears are advanced machines designed for precise cutting of metal sheets of various thicknesses and hardness. Thanks to the hydraulic drive, they provide high pressing force, enabling efficient processing of even the most demanding materials. Their solid construction and modern control systems ensure accuracy, repeatability, and safe operation. These machines are indispensable in industrial plants and workshops specializing in metal processing. Technical specifications Max. sheet thickness (S235): up to 8.0 mm Max. sheet length: 3200 mm Cutting angle: 1.5° Strokes per minute: 10–15 Back gauge travel: 600 mm Motor power: 11 kW Ncjdoych Iajpfx Adwjl Length: 4300 mm Width: 2000 mm Height: 2100 mm Weight: 6400 kg Equipment: Rear gauge driven by electric motor (on ball screws) Hydraulic sheet clamps along the entire cutting length Adjustable blade gap Ball guides on the table for sheets Work area lighting Front supports Mobile foot controller The rear ramp is equipped with ball guides, ensuring smooth and precise movement of cut pieces. This prevents any material fragments from remaining on the machine, improving efficiency and safety. Using steel tubes in the hydraulic system instead of flexible rubber hoses significantly increases system tightness and minimizes the risk of leaks in the future. Thanks to their rigidity and resistance to mechanical damage, steel tubes provide durability and reliability of hydraulic connections. With the mobile controller and the control unit mounted on a movable arm, the operator has complete freedom of movement throughout the machine’s working area. Additional LED lighting and a laser indicator provide excellent visibility of the workpieces, enhancing precision and comfort under any working conditions.