Used Rim for sale (2,583)

Condition: new, Year of construction: 2025, Diatomite crusher & purifying machine Hedpfoq Nx E Sjx Aa Ssff After purifying processing, The purity is white diatomite with SiO2 above 90%, Al2O3 below 0.04%, and Fe2O30.4 below.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: Hfedpfxsywwrfj Aa Sjf • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 340230019, fuel type: diesel, power: 19 kW (25.83 HP), motor manufacturer: Yanmar, Field of application: Construction Empty weight: 700 kg Generator capacity: 20 kVA Transport dimensions (LxWxH): 1.85x0.96x1.52 Please contact PFEIFER GROUP for more information Hfsdpfx Aexwitfja Sof

Condition: used, In this offer you purchase a used slitter rewinder ‘Neolt Electro Trim 150’ Object of sale: 1 x Neolt Electro Trim 150 with the following equipment: incl. underframe 150cm roll width possible electric from 2021 Hsdpfx Aaowln I Tj Seff Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for function Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 68,648 h, travel distance X-axis: 2,300 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,000 mm, table length: 1,800 mm, table width: 1,800 mm, spindle speed (max.): 10,000 rpm, overall weight: 36,000 kg, tool weight: 12,000 g, controller manufacturer: HEIDENHAIN, controller model: iTNC530, number of slots in tool magazine: 10, number of axes: 5, This Trimill VU 2313 Vertical Machining center was manufactured in the year 2010 in the Czech Republic and has 68648 hours, of which 40637 are spindle hours. It is equipped with a Heidenhain iTNC530 control unit and has 5 axis. The machine has a spindle speed of 10000 rpm, is in good condition, and is well maintained. Machine Benefits Qualitative Machine Benefits • Good condition! Technical Machine Benefits • Spindle motor power/torque 25 kw / 195 nm • B-axis (head) -2°/+92° • C-axis table n x 360° • Working feedrates x, y, z 30. 000 mm/min • Rapid feedrates x, y, z 3 m/sec² Hfjdpjywlv Esfx Aa Sof • Through spindle coolantMachine options: Connection station for high-frequency finishing spindle IMT ● HEIDENHAIN probe for workpiece positioning and measurement, infrared transmission ● BLUM probe - for tool measurement, laser - non-contact ● Tool cooling with liquid through the center of the spindle + external nozzles ● Lift Off - prevents the Z axis from sinking and damage to the part in the event of a power failure Technical Specification Taper Size HSK 100

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 5,840 h, input voltage: 380 V, input current: 630 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 1,000 mm, cutting width (max.): 1,000 mm, control type: PLC-controlled, roller diameter: 1,400 mm, actuation type: hydraulic, total height: 3,540 mm, total length: 36,000 mm, overall weight: 15,700 kg, table height: 1,150 mm, Equipment: CE marking, Vertical bandsaw in very good condition, little used, high performance, automatic log sawing line. Hfodpfsywgnisx Aa Sof

Condition: ready for operation (used), * Brand: Triman * Surface: length 3000 mm, width 1800 mm - 4 decks * Driving: 4 pieces vibration motors of each 3,2 kW * Screen opening: [] 10-6-4-2 mm Hsdpfxsywml Is Aa Sjff * Capacity: 0-2 mm 55 t/h * Incl.: steel construction and vibrating chute.

Year of construction: 2025, condition: new, functionality: fully functional, Stainless steel vibrating screen. Diameter 1500 mm. Mesh aperture 0.5 mm. Hsdpfx Aaox Tihkj Seff

Condition: excellent (used), For sale: a set of 4 professional Tyco Electronics Premium CERTI-CRIMP crimping tools, used in the electronics industry, automation, and wiring harness service. The equipment comes with full documentation (eDB cards) – ready for operation, each crimping tool assigned to a specific connector type. Hfjdpfx Aasw Slhie Ssf

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Equipment: type plate available, device for dosing pastes, jams, meat, cheese, etc. into aluminum and plastic cups, including an aluminum lid sealing machine and a date coder Hfedpjw E H A Aefx Aa Sef

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox PrimeLink C9070’ Object of sale: 1 x Xerox PrimeLink C9070 with the following equipment: incl. Fiery Server EX C9065 incl. Paperdeck A-CF01 Hfedpfsvtycysx Aa Ssf incl. booklet finisher A-FN13 incl. SquareFold with front trim incl. Vivid kit for changing. Colours: White, gold, silver, transparent incl. fluorescent kit for changing colours. Colours: fluorescent cyan, magenta, yellow Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Meter readings: Total: Approx. 1,189,345 pages Colour: Approx. 1,049,230 pages Black: Approx. 140,115 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Versant 180 Press’ Object of sale: 1 x Xerox Versant 180 with the following equipment: incl. Fiery Server EX180 incl. Paperdeck A-CF03 incl. booklet finisher incl. Squarefold + Fronttrimmer Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Counter readings: Total: Approx. 2,573,792 pages Colour: Approx. 2,368,409 pages Black: Approx. 205,383 pages Hsdpsvtpnlefx Aa Soff Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, In this offer you are purchasing a used "Plockmatic RCT II" brush trimmer Object of sale: 1 x Plockmatic Trimmer RCT 2.0 Rotation, creasing and 2-sided trimming For various Xerox models Hjdpoqyb U Sjfx Aa Ssff Counter readings: Total: Approx. 987 booklets Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: ready for operation (used), Year of construction: 2011, table width: 3,050 mm, total height: 3,005 mm, product length (max.): 8,388 mm, This 3-axis Prima Industrie Platino 1530 was manufactured in 2011. It features a working area of 3000 x 1500 mm and is equipped with a CO₂ laser with a power class of approximately 3000 W. The machine has a total length of about 8,388 mm and a width of approximately 3,050 mm. If you are looking to get high-quality laser cutting capabilities, consider the Prima Industrie Platino 1530 CO₂ laser cutting machine we have for sale. Contact us for further details. • Supply voltage: 400 V • Current: 53 A • Frequency: 50 Hz • Laser type: CO₂ laser • Laser power class: approx. 3000 W • Laser ON time: 56739 h • HV ON time: 52613 h • Beam ON time: 38740 h • Shutter open time: 39057 h • Shutter cycle counter: 226839 • Vacuum pump ON time: 56729 h • Vacuum pump oil change time counter: 718 h • Turbine ON time: 14118 h • Turbine maintenance time counter: 5157 h Hfsdpfxsynk A Rj Aa Sof

Condition: ready for operation (used), Year of construction: 2017, operating hours: 18,924 h, laser power: 3,000 W, travel distance Z-axis: 150 mm, overall weight: 11,000 kg, number of axes: 3, This 3-axis Prima Power Platino 1530 was manufactured in 2017. It features a 3 kW CO₂ laser, a working area of 3000 × 1500 mm, and can handle mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. It includes an automatic pallet changer and a CNC Touch Interface. If you are looking to get high-quality laser cutting capabilities, consider the Prima Power Platino 1530 machine we have for sale. Contact us for more information. • Working area (X × Y): 3000 × 1500 mm • Positioning accuracy: ±0.05 mm • Repeatability: ±0.03 mm • Drive system: CNC-controlled with brushless servo motors • Control unit: Prima Power CNC Touch Interface • Cooling: Water-cooled • Fume extraction system: Integrated • Total operating hours: 18,924 h Hfsdpjx D Nyxofx Aa Ssf Additional equipment • Automatic pallet changer

Condition: used, Year of construction: 2001, TECHNOLOGICAL LINE FOR MANUFACTURING ROOFING ELEMENTS 1. Profiling machine 2. Insulation element production system 3. AL foil preparation system 4. Gluing system Hodpfeyv E Aijx Aa Sjff 5. Auxiliary components, technical documentation, certificates Types of roofing panels produced on the technological line: - Roofing panels with modular dimensions 1100 mm x 1070 mm - Roofing panels with half-module dimensions 550 x 1070 mm - Roofing panels without anti-condensation layer in various lengths (up to 6 m)

Condition: ready for operation (used), functionality: fully functional, PRIMULTINI SE-CEA-IEA 1100 RIGHT-HAND BANDSAW WITH LOADER AND UNLOADER 1) SE 1100 COLUMN 1100x120 mm flywheels for 130x7500 mm blades Electric blade tensioner and blade guide 50 HP motor – automatic starter 2) CEA-IEA CARRIAGE 4 clamps with electric closing and release 900 mm clamp opening 2 hydraulic log turners Electric spacers Hydraulic cable feed 16.5-meter rail Front operator's control stand 3) FULL AUTOMATION INCLUDING: - 4-way log loading deck, length 5 m - 4 tanks with log-pusher arms operated by a separate hydraulic power unit - 6 m motorised helical roller conveyor with 3 pneumatic board hold-down arms - Final motorised discharge barrier with chain Hfsdpfxjywniho Aa Sof - Collection chutes 4) FOUNDATION DRAWING AND OPERATOR MANUAL

Condition: good (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 778 F 319, Lazer Cutting Fabrikat: Prima Power Typ: Palatino 1530 Hfjdpfx Aaomx Rrlo Sef Baujahr: 2012

Year of construction: 1993, condition: used, Size max 470 x 320 mm Size 152 x 127 mm Speed max 18.000 c/h Pile height 235 mm Hfodpfx Aaec Rntns Sof Pile height pre-loading cage 124 mm

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Size min 102 x 152 x 7 mm max 320 x 470 x 64 mm Speed max up to 15.000 Prod./h Hodpfxjdyky Ts Aa Seff Table height 876 mm

Condition: used, Size max 470 x 320 mm Weight 520 kg (approx.) Speed max 18.000 c/h Equipment • - special: post code identification Hedpfsdrhpfex Aa Sjff

Year of construction: 1998, condition: ready for operation (used), Built in 1998 Size min 102 x 152 x 7 mm max 320 x 470 x 64 mm Speed max up to 15.000 Prod./h Hsdpfx Aaodykhmj Seff Table height 876 mm

Condition: good (used), Year of construction: 2016, Built in: 2016 Hfedpfxju R Ryno Aa Ssf Length: 1,600 mm Width: 1,000mm Height: 2,200 mm

Condition: ready for operation (used), Year of construction: 2011, Built in 2011 Hfodped N D Npofx Aa Ssf

Year of construction: 2004, condition: good (used), Year of Construction: 2004 Description: Transforms the shingled stream behind a web press into counted and compensated stacks for further processing or distribution. No. of products per layer / stack are easily programmable. Details as shown below. Speed: 90.000 cph (product permitting) min format product (head/foot x spine): 102 mm x 145 mm (4.00" x 5.75") max format product (head/foot x spine): 320 mm x 500 mm (12.63" x 19.68") max pagination: 48p Product orientation: Spine leading Hjdpjh Ir E Eofx Aa Sjff Low Infeed Infeed height (min/max in mm): 600-1200 mm Waste gate Stream Aligner / Jogger Single squeeze roller Laser Counter, model: Baumer Scatec-1 Upper bin height in mm: 210 mm Upper Bin with 3 forks Turntable with compression plates max Stack height in mm: 330 mm Servo turntable Pneumatic pusher Delivery Direction to the right Delivery height in mm: 876 mm (34.50“) Air Delivery Table included Over all length equipment: 2650-2950 mm Over all width equipment: ~700 mm Over all height equipment: ~1800-1950 mm Input Power: 3 kVA, 50/60 Hz, 3 ~ Air requirement: 170 l/min 5.5 bar (6 cfm 80 psi) Weight: 945 kg (2100 lb) Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Mechanical / electrical machine test possible Condition: cleaned & in working conditions