Used Rip Fence for sale (15,081)

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Kdsdpfx Ajwypp Ijarew Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: ready for operation (used), Year of construction: 1998, Spray booth / Rippert paint system, fully functional, removed from school operation (WIFI) Manufacturer: Rippert Type: Spray booth / paint system with extraction, control unit, supply air, and heating register Airflow capacity: approx. 10,800 m³/h Design: Extraction/filter system with ductwork and control cabinet control Condition: well-maintained, functional, available dismantled Plans and documentation available Equipment: - High-quality paint application and extraction system from the German premium manufacturer Rippert - Extraction and filter unit with pressure gauge and maintenance hatches - Piping and valve system (galvanized steel, DN connections) - Control cabinet with controls, emergency stop, operation indicators, and operating elements - Heating register - Compact, robust construction for continuous industrial use - Explosion-proof lights (EX) - Explosion-proof fire markers (EX) Application areas: - Wood and furniture industry Kdjdsxp I Ufspfx Aarjw - Metalworking (e.g. machine or vehicle parts) - Coating of plastic parts - General industrial and craft applications Technical data (according to nameplate/manufacturer specifications): Airflow capacity: 10,800 m³/h Manufacturer: Rippert

Year of construction: 2012, condition: good (used), Medium pressure conveyor for wood chips approx. 4 tons per hour conveyor pipe originally 180 m 150 mm partly existing Air capacity approx. 2.350 m³/h Motor power three-phase motor according to IEC 55 kW Protection class IP54 Kdsdpfxeb Uyizj Aarsw 1 Housing made of high quality grey cast iron, equipped with two dynamically balanced dynamically balanced rotary pistons, with hardened and ground, angularly toothed precision timing gears, each mounted in roller bearings. Drives by means of V-belts, with the two pulleys and the corresponding high-performance narrow V-belts as well as a protective cover. 1 drive unit with motor tensioning rails, shaft connection with easy-to-fit Taper-Lock tensioning bushes, completely mounted on a common base support. 1 combined intake-filter-silencer (absorption silencer) 1 resonance-absorption-pressure silencer, version as base unit 1 basic unit 1 pressure valve 1 non-return damper 1 elastic connection sleeve with clamps 1 pressure gauge 1 set of vibration isolators with fixing screws 1 Electrical pressure monitoring consisting of pressure transmitter and display unit as well as electrical output signal 1 acoustic enclosure made of galvanized sheet steel with oil collecting tray and ceiling painting RAL 5001, segmental construction with inner lining and forced ventilation, fan wheel driven by fan shaft. Sound hood for outdoor installation.

Year of construction: 2018, condition: excellent (used), The line is consisting of different producer : It is 2 layer , PE 100, pressure pipe production : 1. Three extruders (inner, outer layer and stripes) with automatic material loaders. Outer layer: LIANSU LSS 65/35, Main extruder , 350 kg/h,2018 Y Ksdpfxjuuah Ue Aaredw Inner layer: LIANSU LSS 45/30, Co –extruder, max 40 kg/h, 2018 Y Stripes: co extruder 2. Extrusion die head complete with all necessary tools, die adaptors, heaters, for all dimensions 20-125mm. Lamellar calibrators up to Ø90mm, SDR 26, 17, 11, and with combinations can be produced SDR 9 and 7.4. Compete list with all tools (in attachments). 3. Vacuum tank, Periplast, year 2001, 6m length, with water-spey nozzles for cooling. 4. Additional cooling chamber, 6m length, Periplast , year 2001. 5. Unit for permanent and long term readable thermal marking, GNATA FILIPPO, Italy, type MAC 140/CCRC/AT-2. 6. Haul off, Liansu, ISPQ 110, year 2013.

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), fuel type: diesel, color: blue, operation weight: 3,375 kg, Year of construction: 2025, New RIPPA R 32 Pro mini excavator, Japanese Kubota engine, 4 cylinders, 18.5 kw, Euro 5 emission, Tier 4 Stage V, picker installation, air conditioning, mansalier camera, year of manufacture 2025, quick coupler, 1000 mm slope bucket, warranty. Kdjdpfxewlvzus Aarew

Condition: excellent (used), • Original Bilz ThermoGrip holders – Made in Germany • SK40 taper, type T0600/AD40 and T0800/AD40 • Balancing G6.3 / 15,000 rpm – suitable for high-speed operations • Set includes solid carbide VHM end mills of various diameters • Ideal for precision machining and applications requiring high stability • Very good condition, ready for operation Top-tier equipment – robust construction, German quality, secure clamping. Kedpfjxau Erox Aarsdw

Condition: excellent (used), Basic element Make Tripan (2841) 3 Type 311 Kedjmk Havspfx Aarsdw Tripan steel holder basic element

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 6360.16.65, Country of manufacture: Switzerland Voltage: 380/400/50/3 Net weight: 1350 kg Customs tariff number: 8460.1920 Dimensions: 200/120/160 cm TECHNICAL SPECIFICATIONS Maximum saddle travel: 530 x 220 mm Maximum grinding surface: 520 x 230 mm Table clamping surface: 600 x 200 mm Table speeds Longitudinal, standard operation: 0-25 m/min With slow feed: 5/10 mm - 8 m/min Cross feed: 0-6 m/min Kdodjw Ucxqepfx Aarsw Vertical travel by hand: 330 mm Rapid travel by motor: 290 mm Rapid feed rate: 460 mm/min Max. distance between table and spindle axis: 412 mm Vertical feed movement Handwheel, 1 division: 0.01 mm Micrometric device, 1 division: 0.001 mm Automatic: 0.001-0.099 mm With pulse button: 0.001 mm Cross feed movement Handwheel, 1 division: 0.01 mm Micrometric device: 0.001 mm Grinding wheel Diameter x width x bore: 225x25x50/51 mm Standard RPM: 2700 rpm With variable speed drive: 3700-1300 rpm All technical data are provided without guarantee and are subject to possible errors or omissions.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 5,800 h, load capacity: 2,500 kg, lifting height: 5,900 mm, free lift: 1,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,680 mm, Equipment: cabin, pallet forks, Load capacity 2500 kg Linde H 25 Diesel Mast type: Triplex free lift Year of manufacture: 2003 Operating hours: 5800 Lift height approx. 5900 mm Overall height approx. 2680 mm 3rd & 4th valve, double auxiliary hydraulics Fork positioner, rotator Gross price €17,255; Net price €14,500 Are you looking for another forklift or high-lift truck? LPG, electric or diesel? Kodpfx Aow U Ip Uoarsdw Contact us and we will find the right vehicle for you. Subject to error and prior sale. Sale to businesses only, without warranty.

Condition: used, functionality: fully functional, Year of construction: 2016, load capacity: 4,000 kg, fork length: 1,300 mm, Fork positioner Condition: Ready for use and fully functional Technical condition: good Description: Year 2016 ISO 3A (51 cm) Capacity 4000 kg Sideshift Opening range 390-1240 mm Width 1280 mm Forks 1300-2200 mm ID OS1329SLO Kjdjudf N Ispfx Aarjdw

Year of construction: 2011, condition: ready for operation (used), A complete painting system is available. Components: (1) overhead conveyor, (2) spraying area/brush wall, length: 4000mm, width: 1500mm, height: 4800mm, with Maxon burner, suction pipe, drawers for dry paint disposal, six filter mats, various filters, (3) evaporation area, (4) drying booth, length: 6500mm, width: 5200mm, height: 3150mm, with Weishaupt WG10N/1-D ZM-LN gas burner. Overall system dimensions: 24,000mm/10,000mm, max. output: 45kW. Documentation is available. Kjdpfx Aasup Ehierjdw

Condition: used, Year of construction: 2023, Lifting capacity 2000 kg fork length 1150 mm Kodpfxevfhrme Aarsdw Weight ca. 300 kg fork measurements 120 x 40 mm adjustable 280 - 1000 mm tool adaptor FEM 2 A Fork positioner “Full sideshift” to the left and right Fork adjustment for narrow and wide pallets Adjustment within the frame width 3 devices in stock

Year of construction: 1983, condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow: 10,000 m³/h -Total pressure: 3500 Pa Kedpfx Asb A Siuearjdw -Connection input: Ø 350 mm -Connection output: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 3,500 kg, fork length: 1,200 mm, Fork positioner Kdedpfot Tbzmox Aarew Condition: Ready for use and fully functional Technical condition: good Description: Year 2017 ISO 3A (51 cm) Capacity 3500 kg Sideshift Opening range 450-1150 mm Width 1160 mm Forks 1200 mm ID OS1326SLO

Condition: ready for operation (used), Year of construction: 1997, A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible. Kdjdpowydgzofx Aarew

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 50 mm Kdedpfsb A Nanox Aarow -Load capacity: 5000 kg -Weight: 31 kg

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 1,700 kg, fork length: 1,200 mm, Fork positioner Condition: Ready for use and fully operational Kdedpfow Ez T Nox Aarow Technical condition: good Description: Year 2018 Sideshift Capacity 1700 kg Opening range 300-850 mm Width 900 mm Forks 1200 mm Mounting Linde 1120 R16HD ID OS1703

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 3 to 24 mm -Load capacity: 3000 kg Kjdpfxjb A Niwo Aarjdw -Number: 2x terminals available -Price: per piece -Weight: 14 kg/piece

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper Ksdpfeb A N Uvsx Aarsdw -Sheet metal claws -Span width: 0 to 30 mm -Load capacity: 3000 kg -Number: 2x terminals available -Price: per piece -Weight: 14 kg/piece

Condition: used, Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter Kdsdpfx Aajcazrvsrsw -Wood cutter: with ETP Hydro-Grip -Outer: Ø 180 mm -Height: 46 mm -Socket: Ø 40 mm -Number: 2x milling cutters available -Price: per piece -Weight: 10 kg

Condition: used, Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -AKE wood router with: AKE Hydro-Grip -Outer: Ø 165 mm Kdedpfecazr Aex Aarow -Height: 60 mm -Socket: Ø 40 mm -Mill: 1 -Price: complete -Weight: 8 kg

Year of construction: 1992, condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan Kdsdpfx Asb Rh U Tearjw -Motor power: approx. 3 kW -Connection input: Ø 230 mm -Connection output: 335 x 290 mm -Impeller: Ø 340 mm -Dimensions: 540/580/H660 mm -Weight: 80 kg

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper Ksdpfedi Slasx Aaredw -Sheet metal claws -Span width: 0 to 50 mm -Load capacity: 6000 kg -Number: 1x terminals available -Price: per piece -Weight: 24 kg/piece

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 32 mm -Load capacity: 3000 kg -Number: 1x terminals available Kedpfjdi Slujx Aarodw -Price: per piece -Weight: 14 kg/piece

Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -for: painting wall, painting booth -Motor: Ex protected -Motor power: 3.6 kW -Speed: 1440 rpm Kdodpfedq Dcpsx Aarjw -Connection input: O mm -Connection output: 450 mm -Dimensions: 1260/1100 / H815 mm -Weight: 188 kg