Used Rotary Dryer for sale (5,546)

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 24400 € 468.48 € 3000 kg 150 mm 150 mm 360 ° 135 kgm 400 / 50 V / Hz 1.1 kW 1.1 kW 1200 mm Nedjx Urqdepfx Ahnjlf 700 - 950 mm The hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted to the floor. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. The rotation speed can be adjusted via a potentiometer.

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. Nlsdpfeyb Rpdex Ahnsf The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: good (used), Year of construction: 2013, Rotary oven Hein Luxrotor Njdex Rbqfepfx Ahnolf - model LR 108 HD - Ecostone - year of manufacture 2013 - for trays 60x100 or 80x100 - oil or gas burner - computer control - oven from ongoing production - collection from warehouse / shipping option available - price on request

Condition: excellent (used), Part-turn actuator, pneumatic cylinder, rotary vane actuator, swivel module -Manufacturer: Rotech, TCR module for rotary actuator unused -Type: TCR3MVAZ -Number: 2x module available -Price: per piece -Dimensions: 160/70/H105 mm -Weight: 0.4 kg/piece Nledexbzt Ejpfx Ahnof

Year of construction: 2025, condition: new, functionality: fully functional, Available models on GAS and Electrical power supply with different dimensions and capacities Perfect for artisanal bakeries, semi-industrial plants and retail stores The ideal solution for anyone looking for superior baking performance and maximum flexibility when working with different types of bread and pastries, regardless of shape, size or quantity. It burns perfectly at both full and partial loads. Innovative baking systems for perfect results BTT (Bottom to Top) baking system – air circulates from the bottom up, creating a floor oven effect for a unique baking quality. The result: a product that leaves customers breathless! DAF (Double Air Flow) – extremely even baking thanks to the double airflow that encompasses each product. Not available on model 4676. Ideal for: Cakes and pastries of low weight (e.g. 60–70 g Kaiser pastries, biscuits, sticks, tarals...) Fast baking cycles (less than 15 minutes) High racking (more than 18 levels) Narrow and long trays (e.g. 46×80 cm) OPT function – allows you to monitor the efficiency of the furnace operation in real time, helping in more rational use and energy savings Technical characteristics: Baking surface: 6.3 m2 (n°18T 46x76) Oven dimensions WxDxH: 123x171x251 Minimum room height: 270 cm Power GAS: 52 kw 44000 kcal/h Electrical power: 1.5 kW Weight: 1350 kg Max. Baking temperature: 300 °C Heating: electric or gas/light fuel oil Main switch located on the control panel Advanced control and management TOUCH electronic control "Ready to Bake" – the stove is always ready with lower consumption "Recovery Time" – the exact time to re-readiness Partial Load Management Password protection of recipes USB 2.0 for fast and secure data transfer. Effective steam management Speed Dry – faster steam ejection (70% faster), for crispier and more fragrant products Increased steam generator (standard equipment) – higher volume and better steam distribution Automatic steam damper Stainless steel exhaust – 900 rpm Energy efficiency and durability High-performance heat exchanger and firebox (in combustible versions) Double armored heaters (electric version) Two-layer high-density mineral wool insulation Rubber-silicone seal + stainless steel – long life and no steam leakage Thermo-reflective glass – saves energy Ergonomic vertical handle along the entire height of the door, with double locking system Raised stove bottom – additional thermal insulation Connection to a power limiter (only on electric models) Construction and ergonomics: Nedpfxowhdhue Ahnelf Stainless steel front and hood Stainless steel floor with adjustable flaps for air regulation Rotary trolley unit with motor and mechanical overload protection Manual lifting mechanism Trolley access door 194.5 cm high (model 4676 off) Door with hinges on the right side Stainless steel access ramp, gentle inclination for easy insertion/removal of the trolley Flat inner surface – easy to clean Prepainted steel side panels Access to the main controls from the front Heavy Duty version (HD kit) – available for models 80100 and 80120 For intensive work over 8 hours a day and average temperatures above 250 °C – additional reinforcements for maximum durability.

Condition: good (used), Year of construction: 2013, Kaeser TAH7 Refrigeration Dryer Nsdpfx Aewhvqzohnslf Compact, fully automatic, air-cooled compressed air drying system. Flow rate: 0,60 m³/min

Condition: good (used), Batch dryer dryer Aeromatic Strea 30 fluidized bed dryer batch dryer Stainless steel version Complete with control cabinet and accessories (operation unknown) Total height +/- 3 meter Equipped with nozzle device Nodewyf H Njpfx Ahnelf Suitable for drying and coating Fan power 5,5kW 62000 kcal/h See our other advertisement VMA Wekerom

Condition: new, Year of construction: 2025, load capacity: 1,200 kg, – Horizontal capacity 1200 kg – Vertical capacity 1200 kg – Table dimension 1300 mm – Electrically tiltable – Wireless remote control – Digital display – Boreholes Ø 16 mm Nedewygixjpfx Ahnelf – Documentation – 400V

Condition: used, -Model: NG 144 -Capacity: 90 to 252 baguettes -Trolley dimensions: 600x800 mm -Dimensions (LxWxH): 1500x1560x2200 mm -Year: 2000 -Serial No.: 144NGA035 -High-grade top hanging hook -Power: 2 kW -Heating capacity: 90 kW -Voltage: 400 V -Weight: 1,320 kg -Suitable for baking bread, pastry, and viennoiserie Nljdpewxl H Hjfx Ahnof -Burner: C10 gas -Insulated with rock wool panels -Double glazed 8 mm, tempered 'Securit' glass -400 mm stainless steel access ramp Lrey Tdewxl H Hoxugsr -Equipped with steam evacuation valves -Fully stainless steel refractory heat exchanger -2 steam units for optimal distribution over the products -4 heat distribution turbines for improved baking -Front, hood, and extractor made of stainless steel -Stainless steel sheathed heating elements -High-temperature resistant silicone electric wiring harnesses.

Condition: excellent (used), -Dimensions: 1440x2700x2600mm -Chariot 600x800 -N°série:9300041424 -Modèle:E8.64 -Année:06/2016 -Surface au sol: 2,71 m2 Njdpfewxmfwox Ahnolf -Température max: 280°C -Passage de porte: 830 mm -Puissance de chauffe: 57kW -Tension:400V

Condition: excellent (used), - Brand: BONGARD - Model: 8.62E - External dimensions: 1430x1930x2220 mm Njdpfxswxmgno Ahnelf - Tray size: 600x800 mm - Capacity: 150 baguettes - Electric - Power: 56 kW - Voltage: 400 V

Condition: used, -External dimensions (LxWxH): 1550x1600x2560 mm -Trolley: 600x800 mm -Baking surface: 9.6 m² -Minimum ceiling height: 2850 mm -Fixed Program Control -Heating mode: Gas Lrsyewxmy Us Tdxuger -Nominal thermal output: 75 kW Njdpfxswxmy Uo Ahnjlf -Voltage: 400 V -GAS burner -It is well known: the MIWE roll-in is probably the most economical rack oven in the world (and this has been proven in hundreds of bakeries). -Its excellent baking properties make it truly unique in its category—and for good reason. -For consistently even baking, 'atmospheric baking' completely eliminates disruptive influences caused by ambient conditions and draft. -The patented MIWE aircontrol system ensures precise heat transfer and perfect crispness. MIWE delta-baking, with extremely precise temperature control, allows for true custom settings, e.g. for pastries and fine bakery goods. -In addition, with the heat recovery wall combined with a high-performance steam device, quick successive baking at reduced connected load becomes possible. And these are just a few of the many good reasons to take a closer look at the MIWE roll-in.

Year of construction: 2004, condition: used, Used Kilian E 150 PLUS single sided rotary tablet press. Has stainless steel covers. 26 stations capable of up to 16 mm tooling, EU-B of toolings. Manually adjustable fill depth up to 20 mm. Pre-pressing at 23 kN and manually adjustable main pressure up to 100 kN (10 tons). Maximum capacity 162 800 tablets per hour. Stainless steel change-speed forsed feeder. Press is driven by el. Motor 4kW/3ph/400V/50hz with frequency changer. New 2004. Nodpfx Ajwm Ar Aohnjlf

Condition: used, Motor-driven indexer and rotary table, also known as indexing table with 15° indexing lock. Manufacturer: WALTER, Type: TARM 125 Serial No.: 1156, Year of manufacture: approx. 1985 Indexing lock: 15° Flange mount: short taper DIN 55022 size 5, Ø 82 mm Internal diameter of chuck flange: Ø 44 mm Continuous internal diameter: Ø 40 mm Nlodpfx Ahsyhq A Dsnsf Construction height to flange mount without taper: 163 mm Horizontal clamping surface: 260 x 215 mm Vertical clamping surface: 195 x 160 mm Center height vertical: 125 mm Motor speed: 0 to 500 rpm Power supply: 380 Volt, 50 Hz - external control required (control unit not included) - can be used vertically and horizontally - usable as indexer or rotary transfer table - one direction of rotation continuous, the other direction with 15° indexing lock Space requirement L x W x H: 500 x 215 x 177 mm Weight: 42 kg Good condition

Condition: excellent (used), Year of construction: 2011, MANUFACTURER: HANKINSON MODEL: HHDP2700 SERIAL NUMBER: 4001011004 Nlsdpfsyh Uvxsx Ahnsf YEAR: 2011 POWER (kW): 7 CAPACITY (m³/min): 45 PRESSURE (bar): 16

Condition: good (used), Year of construction: 2017, ESC Screen Printing System 1100-2C/IR with IR Dryer Manufacturer: ESC – Europa-Siebdruck-Centrum GmbH & Co. KG Model designation according to nameplates: PAJD 1100-2C/IR and Perfection 1100 2C/IR Year of manufacture according to nameplates: 2016 and 2017 Machine/Factory numbers: 9960-14-1065 / 11661 Electrical connection: 400 V, 50 Hz Rated current: 120 A (nameplate PAJD) Rated power: 76 kW (nameplate Perfection) Protection class: IP40 Belt type: IR temperature tunnel with conveyor belt (width as per series: 1100 mm) Assembly: IR drying unit for screen printing or coating processes Design: Enclosed safety housing with access doors Application area: Drying/cure of printed or coated components Location: Schierling Nledpfeyrm Hyex Ahnof Inspection possible by appointment.

Condition: good (used), Year of construction: 2010, Internal item no.: 26046 Granulate drying plant + Multi-hopper system Nodpfx Aey R Rumshnjlf SOMOS D200 Year of manufacture: 2010 10x hopper Including electrical wiring diagram and operating manual

Condition: good (used), Year of construction: 2001, functionality: fully functional, power: 6.2 kW (8.43 HP), input voltage: 400 V, input frequency: 50 Hz, temperature: 150 °C, total length: 600 mm, total width: 950 mm, total height: 2,000 mm, overall weight: 150 kg, number of chambers: 1, control type: CNC control, Equipment: CE marking, documentation/manual, Tank capacity: 100 litres Heating capacity: 4.5 kW Blower output: approx. 0.85 – 0.95 kW Total power: 6.2 kW Airflow: 90 m³/h Maximum drying temperature: 150 °C Operating voltage: 400 V / 50 Hz Transport height: up to approx. 3000 mm Unit weight: approx. 130 – 150 kg Dimensions (W x D x H): approx. 950 x 600 x 2000 mm 3 units available Price: 1,350 EUR / unit Nedpfxoy N T Uto Ahnelf

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: 87, functionality: fully functional, EBERL vacuum dryer, manufactured in 2004. Underwent a major overhaul in 2024, performed by Eberl (purchased directly from Eberl). Fully operational, complete documentation available. Nedpfx Ahsy Uc I Hjnslf

Condition: good (used), 415 USED FN Aerotherm rotary rack oven. EXTERNAL DIMENSIONS (in cm): -W: 150, -D: 283 (with hood 350), -H: 241. Paid options available: renovation / transport / assembly / commissioning of the device. Nedpfjzd Ay Eex Ahnolf The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, UKRAINIAN, RUSSIAN.

Condition: excellent (used), Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances: 40% of the lower explosive limit (LEL) Maximum temperature of the heating surface: over 750 °C Device description: Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: overall width 796 mm, height 1725 mm, depth 850 mm Load capacity / payload Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air flow rate: 96 m3/h Purge time (5 air changes): 90 seconds Enhanced recirculation air flow rate: 33 m3/h Total steam volume: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature Temperature limiter (TL) fixed setting: 300 °C Adjustable temperature selector (ATS) adjustable above the rated temperature: 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TL): 1 Adjustable temperature selector (ATS): 2 Rated temperature: 200 °C Electrical data Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated power: 6.0 kW Connected load: 7.0 kW Weight: 275 kg Condition: used Scope of supply: (See image) Nedpfx Ahszg Tppsnjlf (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2001, Manufacturer : Forberg Model : FT20 Year: 2001 Type: Paddle dryer Description: The product is dried by blowing hot air through the mechanically suspended (fluidised) product. The humid air and suspended particles rise towards the primary filter. A fan blows the humid air into a three-stage water-cooled coil cooler. The condensate from the dehumidified air is drained from beneath the chamber. An electric heater reheats the cold, dry air, and the air returns to the mixing chamber. Material : stainless steel Nominal capacity: 20 litres Mechanical mixing: two counter-rotating blade shafts Variable speed: yes (see control panel) Nlsdpfx Ahezbypysnjf Forced-air ventilation: 1 cold-air fan and 1 hot-air fan Cooling unit: tube heat exchanger, external source fluid connection, condensate drain. Heating system: 20 kW Temperature and humidity sensor Product sampling Infastaub AJN 024 air filter / dust collector: surface area 2 m² Cleaning filters with compressed air PLC + HMI: Siemens These options are available and are subject to an additional quote Lump breaker for wet granulation. Liquid spraying Dimension : 326 x 97 x 230 cm Operating manual and wiring diagrams Video available when powered on  

Condition: excellent (used), Year of construction: 2020, operating hours: 51,008 h, functionality: fully functional, Used Kaeser TE142 refrigerated dryer 15.50 m3/min 16 bar Nlodpfjzcmpvjx Ahnsf Year of manufacture: 2020

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, BUSCH R5 RA 1000 B | Rotary vacuum pump / High-performance vacuum unit Manufacturer: Busch Vacuum Solutions Model / Type: R5 RA 1000 B 4Z1 EKXX Nledsy Umv Ispfx Ahnof Serial number: C035000168 Year of manufacture: 2003 Power supply: 400 V / 3 Ph / 50 Hz Capacity: 1000 m³/h Rotational speed: 1000-1200 rpm Overall dimensions: 1800 x 1000 x 1700 mm The Busch R5 RA 1000 B, an industrial rotary vacuum pump, is one of the most reliable and powerful vacuum devices available on the market. This model, with its enormous suction capacity of up to 1000 m³/h, has been designed for continuous, uncompromising operation in the most demanding industrial environments. Devices of this class are the heart of the machinery in large meat processing plants, slaughterhouses, food packaging plants, as well as in the chemical industry and plastics processing. The pump's design is based on proven oil-lubricated rotary vane technology, which allows for achieving stable, very high ultimate vacuum while maintaining quiet operation and optimal system temperature. The RA 1000 B model is characterized by exceptional resistance to water vapor and volatile product particles thanks to its advanced, internal oil filtration and recirculation system. Using this pump as a central vacuum unit allows for the simultaneous operation of multiple packaging or process machines in production halls, resulting in significant energy savings and simplified maintenance.

Condition: used, Year of construction: 2020, operating hours: 35,933 h, functionality: fully functional, machine/vehicle number: 200202-0010, total length: 8,250 mm, total width: 2,600 mm, total height: 3,150 mm, type of input current: DC, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, type plate available, We are offering our outdoor drying system, model RG 50, from Heber. This weather-resistant, container-like drying unit is used for the technical drying of: Wood chips Grain Hay / Straw Bulk goods in general The system operates according to the principle of convective warm air drying: Nledpfx Aszba Nyjhnof Heat source Waste heat (e.g., from a CHP unit) Alternatively, oil/gas heating Air treatment, fan draws in ambient air, air is heated, drying process Warm air flows through the material, moisture is absorbed, exhaust air, moist air is discharged High energy efficiency through waste heat utilization, uniform drying, automated operation. Air flow rate: 55,000 m³/h Continuous operation (24/7 possible) Danfoss control system, manual is available. With 6 possible connections for drying containers. The system is still connected but is no longer in operation. Dismantling is the responsibility of the buyer! A telecrane and a low-bed trailer are required for transport! Inspection is possible by appointment!