Used Rotary Dryer for sale (5,156)

Condition: new, Year of construction: 2025, Dry Rotary vane vacuum pump. Available in stock. Completely new. With 12 months warranty. Lsdpjftzpvsfx Abceri Nominal flow: 25 m3 / h at 50Hz. Final vacuum: 150 mbar abs. Any clarification, do not hesitate to contact us.

Condition: as good as new (ex-display), PUMP WITH ATEX CERTIFICATION Rotary vane vacuum pump in oil bath. Available in stock. Completely overhauled pump. With warranty. Nominal flow: 30 m3 / h at 50Hz. Final vacuum: 1x10^-3 mbar abs. Any clarification, do not hesitate to contact us. Lodpfjftzgxox Abceri

Year of construction: 2018, condition: new, Freeze dryer completly new. Pilot plant. Capacity:1 kg / 8hrs Effective Area :0.15 m2 Wet Input per 8 hr: 1 Kg Dry Output per 8 hr: 0,2 Kg Temp Range Drying: 30 ºC - 100 ºC Water Removal Capacity: 0,8 Kg Ultimate Condenser Temp: -40 ºC Defrosting Method: Natural Total Connected Load : 1Ph/15 Amp Connection Average Connected Load: 1Ph/15 Amp Connection Plant dimensions: 1,1m*0,7m*1,5m 1. Freeze Drying Capacity: Wet input 1 kg. per shift. On a higher side, each shift shall be of 8 to 8.5 Hrs. The wet input can either be biological cultures, enzymes, polymers, extracts, sprouts, vegetables, fruits, nutraceuticals, herbs, spices, sea foods, instant curries/gravies etc. of minimum 15% solids. 2. Residual moisture: Final moisture content on the product shall be less than 4%. Ljdpfx Ajfn Iudjbceri 3. Compressed air: Maximum pressure 5Kg/Sq.cm. Flow rate 3 cubic Meter/Hr. Material: Stainless steel 304 Flow rate vacuum pump: 13 m3/h

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 07761, We offer this used Tonello TD 25 E tumble dryer, year of construction 2018. Machine type: TD 25 E Power supply: 3Ph+GND Voltage: 400 V Frequency: 50 Hz Basket volume: 572 l Installed power: 26 kW Lrodpfx Abjyuu A Ujcoi Maximum peak absorbed current: 65 A Maximum working absorbed current: 52 A Weight: 375 kg Cable power supply size: 16 mm² If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2006, functionality: unexamined, machine/vehicle number: 12668, Used Martin Christ “Rotary Vacuum Concentrator” 2-25 Manufacturer: Christ Model: RVC 2-25 Lrodeyvq A Ijpfx Abcei Voltage: 230 V (50 Hz)

Condition: new, Year of construction: 2023, functionality: fully functional, Rotary arm wrappers are state-of-the-art pallet and stretch film wrapping machines in which a powerful rotary arm combined with a reliable pre-stretch system enables precise wrapping of the pallets. This advanced technology allows the packaged goods to remain unchanged during the wrapping process. This makes rotary arm wrappers particularly suitable for pallets with light or unstable goods and for loads that are difficult to maneuver. - Maximum product height: 2,000 mm - Maximum pallet dimensions: 1,200x1,200mm - Minimum weight: 45kg Lsdpfxjr Nc Spj Abcjri

Condition: excellent (used), Prosela rotary tray sealer with gas flushing. Lodpfx Absywx R Nocsri

Condition: used, Year of construction: 1985, functionality: fully functional, Universal turn & tilt table from MAHO 800 Lodpfjb I Irwjx Abcori with mechanical y-adjustment via hand wheel

Year of construction: 2025, operating hours: 100 h, condition: like new (used), functionality: fully functional, HMD-G200 — High-Performance Rotary Packaging Machine The HMD-G200 is a robust rotary packaging machine, purpose-built for the automatic filling and packaging of a wide array of products, ranging from fine powders to granular or chunky materials such as nuts, legumes, rice, seeds, or snacks. It merges high precision with intuitive operation, ensuring optimal production efficiency—an ideal solution for small, medium, and large-scale operations across the food, chemical, cosmetics, and pharmaceutical sectors. ⚙️ Main Features Fully Automatic Packaging Solution: Automated workflow from pouch feeding, opening, filling, and sealing to date coding—delivering uninterrupted and highly efficient production processes. Versatile Applications: Suitable for a comprehensive range of products: - Powders: e.g., flour, spices, protein powder - Granular products: e.g., lentils, beans, rice, nuts, snacks, seeds - Granulates or blends Compatible with Pre-Made Bags: Handles high-quality pre-formed pouches made of multilayer laminated film or paper—with or without zipper. Lrodpfx Asxqccmsbcoi Precise Dosing: Features an integrated auger filler or optional volumetric dosing for precise filling by weight—with an accuracy of ±0.3–1.5%. Intuitive Control: Equipped with a modern SIEMENS touch screen for complete management of all parameters via a user-friendly interface. Hygienic Stainless Steel Construction: All product-contacting components are made from 304 or 316 stainless steel, are compliant with international hygiene standards, and are designed for easy cleaning. Safety & Efficiency: Automatic error detection prevents sealing defects or product loss. Integrated alarms for air pressure, overload, and pouch handling ensure maximum operational safety. 🔩 Technical Specifications Parameter Value Model HMD-G200 Packaging speed 5 – 55 bags/min Bag size Width: 90–200 mm / Height: 150–350 mm Bag type Pre-formed pouch, with or without zipper Power 2.1 kW Power supply AC 380 V ±10%, 3-phase, 60 Hz Air pressure 5 – 8 kg/cm², Air consumption 0.4 m³/min Noise level ≤ 80 dB Bag opening Vacuum system Additional features Date coding, nitrogen flushing, vibration, air evacuation 🧠 Key Components from Industry-Leading Brands Component Brand Touch screen & Control SIEMENS Frequency inverter Bosch Rexroth Temperature controllers & Relays OMRON Pneumatics & Valves AIRTAC / Festo Vacuum pump ORION 🚀 Included in Scope of Delivery - Auger filler for powders and fine granular products - Stainless steel screw conveyor for automated product feeding - Integrated date coder - Horizontal conveyor belt for finished pouch discharge 💡 Your Key Advantages ✅ Reduce labor costs through full automation ✅ High throughput with consistent, repeatable quality ✅ Flexible configuration for powders, nuts, pulses, and blends ✅ Hygienic, robust, and easy to maintain ✅ Simple, intuitive operation with intelligent Siemens controls

Condition: new, No. 3183 Vacuum dryer / drying chamber ISVE ES 3 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1300 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 790 mm Net wood volume: approx. 2,5 m3 Installed electrical power: 8,80 kW Average hourly power input: 4,4 kW/h Includes: - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (65 m3/h / 1,8 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan of 0,37 kW each 380 VCa) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Lrsdpfx Absu Tipkscji Transport dimensions approx. 5900 x 1300 x 2000 mm LWH Weight approx. 2000 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2002, condition: ready for operation (used), An Edelmann converted from a gravure printing machine into a rotary die-cutting machine is available. Principle: inline web processing with sheet stacking, materials: paper/cardboard/labels/die-cut parts, tool mounting: die-cutting plates, tool holder: magnetic cylinder, magnetic cylinder circumference: 24in, tool cassette: 12in, web width: 485mm, max. material width: 485mm, material weight range: 35-170g/m², max. roll diameter: 1200mm, max. production speed: 200m/min, production steps: roll-rotary die-cutting/cross-cutting/high-pile delivery. The machine ran little and is in as-new condition. Documentation available. An on-site inspection is possible. Ledpfx Absyt N Dkocori

Condition: used, Universal swivel, tilting, and rotary table DECKEL Lrsdpfx Abed E A I Nscsi Universal add-on table for tool milling machines suitable for FP 2L, FP 3L, or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with scale - Can be tilted to/from the machine +/- 15 degrees - Swivel range +/- 15 degrees - Swivel table, tilting table, angle table Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Ljdpegd D U Eofx Abcjri Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum Lrjdpjdzqn Uefx Abcsi + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Condition: used, Vacuum pump, vane pump, rotary vane pump ALCATEL type 100-132 No. 173082 - 3101 Year of construction: approx. 1995 Lrjdsd A Srgepfx Abcji Volume flow: approx. 50 m3/h Vacuum: 0.5 mbar (specification on the nameplate) Negative pressure: - 0.9 bar (determined during test run) Engine power: 3 kW Engine speed: 1420 rpm. mains connection: 400 Volt, 50 Hz - Oil lubricated rotary vane pump Dimensions L x W x H: 700 x 420 x 310 mm Weight: 78 kg sound condition

Condition: used, Welding turntable – Welding positioner with enclosure Circular welding device Load capacity approx. 50 kg Chuck diameter 300 mm Chuck rotational speed 1.0–15 rpm Lrodpedzp U Iofx Abcei Power supply 230 Volts, 50 Hz - Spiral scroll chuck with internally stepped jaws - Infinitely variable speed adjustment via potentiometer - Drive via geared motor, rotation direction left - Start via electrical switch - Welding current transmission via slip ring contact - Extraction connection Ø 160 mm - Internal lighting Door opening W x H 715 x 1060 mm Internal dimensions W x D x H 780 x 780 x 1100 mm Required space W x D x H 900 x 900 x 2300 mm Weight 190 kg

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. Lredor I E Itjpfx Abcoi throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: used, Univ. swivel-tilt-rotary table Add-on table for Univ. tool milling machine table size 630 x 250 mm Groove width 14 mm Rotatable and tiltable +/- 30 Swiveling +/-45 - 4x T-slot Weight approx. 120 kg Lsdpfxsgp T D Nj Abcori

Condition: used, R80SM is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England) Details of the R80SM model Lrjdoyrphmjpfx Abcji - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Typical technical parameters R80 - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: good (used), Year of construction: 2002, Compressed Air dyer Operating pressure: max. 16 bar Temperature range: 5 - 43 celsius Voltage: 400 V Weight: 625 kg Overall dimensions: 1300 x 900 x 2100 mm Ljdsg Itzqepfx Abcjri

Condition: used, R80E MC is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England), manufactured in 1983 (serial number 112/83). Details of the R80E MC model Lsdpsyrn Rajfx Abcjri - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Year of manufacture: 1983 (112/83 – 112th machine in 1983 or December 1983). - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Typical technical parameters R80/R80E - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: used, table diameter 630 mm weight of the machine ca. ca, 0,35 t Lrjdpsymf U Esfx Abcji table height 220 mm

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 4,285 kg, total length: 2,200 mm, total width: 1,830 mm, total height: 2,130 mm, motor manufacturer: SIEMENS, power: 200 kW (271.92 HP), fuel type: electric, volume flow: 5,500 m³/h, Equipment: documentation/manual, type plate available, NEW rotary piston blower, never installed KAESER Model HB 950 C PRESSURE MODE: Max. differential pressure: 1000 mbar (eff.) Max. flow rate: 93.1 m³/min VACUUM MODE: Max. differential pressure: 500 mbar (vac) Max. intake capacity: 91.7 m³/min Lodpfxeyhxb Ej Abceri Nominal motor power: 200 kW Connection diameter: DN250 Dimensions with soundproof enclosure (L x W x H): 1830 x 2200 x 2130 mm Weight: 4285 kg

Condition: new, No. 3187 Lrsdpfxsvc Axps Abcsi Vacuum dryer / drying chamber ISVE ES 5 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1600 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 1100 mm Timber pile height: 990 mm Net wood volume: approx. 5 m3 Installed electrical power: 16,01 kW Average hourly power input: 8 kW/h Includes: - 12 electric heating plates (each 1100 x 5000 x 10 mm LWH / 57 kg / 1,25 kW) - 2 internal condensers (turbofan of 0,55 kW each 380 VCa with stainless steel pipes) - 1 one-way valve (clapet: one ¾” for vacuum circuit) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1620 x 2300 mm LWH Weight approx. 2900 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Year of construction: 2001, Label size max.: 250 x 250 mm / min.: 10 x 45 mm Pile height: 0 – 40 mm Maximum sheet thickness: 2.5 mm Speed: 60 cuts/min Lrjdpfx Absyt Nvaocei Output: up to 400,000 pcs/h Positioning accuracy (head): 0.02 mm Die adjustment: 2 – 3 ° Press force: 78,000 N Power consumption: 5.7 kW Current consumption: 12 A (380V, 50Hz) Working area: 960 x 2,900 mm Weight: 1,250 kg Equipment - Semi-automatic label die-cutting machine - Hydraulic operation - Die-cutting of labels from pre-cut material strips - The label stack is fixed in place by a clamping device and fed horizontally into the die-cutting head - The stack is vertically die-cut using a form die installed in the cutting head - Die-cut labels are transported upwards by the tool and removed by the operator - Separate control panel with 2-button safety interlock - Technical documentation included