Used Rotary Grinding Machine for sale (65,233)

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Manufacturer: KELLENBERGER Type: 600 U Nr. 33 Year of construction: 2003 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Lodpeya Dagjfx Adwjhb Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm

Condition: good (used), Year of construction: 2001, Ref. -No.: 10617 Manufacturer: KELLENBERGER Type: 600 U Nr. 36 Year of construction: 2001 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Lhsdpjya Daaefx Adweb Height of centers by lifting work blocks head and tailstock: 175-250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 -5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 360° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Max. Grinding length: 900 mm

Condition: good (used), Year of construction: 2001, Ref. -No.: 10608 Manufacturer: KEHREN Type: RI 64 Year of construction: 2001 Type of control: CNC Control: Sinumerik 840 D Storage location: Halberstadt Country of origin: Germany Table Diameter: 800 mm Grinding Diameter: 1250 mm Max. Table Load: 2000 kg Connection: 92 kVA Machine weight: 18000 kg Rated voltage: 3AC 400 V Rated frequency: 50 V Rated current: 157 A Performance assurance: NH-Sicherung 225 A Max. cabinet internal temperature: 55 °C Temperature change: max. 10 K innerhalb 1 Stunde Altitude max. above sea level: max. 1 K innerhalb Minuten m Further information: - Mold growth - Negligible risk inside the equipment - Impact of rodents and other pests - Temperature change max. 10 K within 1 hour - max. 1 K within 3 minutes - Supply line fuse Lodpoya A U Asfx Adwohb - The machine control system complies with the applicable regulations DIN VDE 0660 Part 500 Edition 04.91 - Standards complied with EN 60 204-1 / EN 60 439-1

Condition: excellent (used), For sale: CNC rotary table from the renowned brand Fadal Engineering (USA), model VH65. Professional 4th axis designed for machining centers, especially Fadal VMC, but integration with other CNC machines is also possible using the appropriate controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multipin connector • Serial no.: 4630298 Condition: used, mechanically functional, normal signs of operation. Solid and heavy construction – ideal for precise 4-axis machining. Lsdpfxsw R St Ns Adwehb

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: 2242, table width: 300 mm, table length: 1,000 mm, Surface grinding machine type SPD-30b for metal. Max. grinding area – 300 x 1000 mm; power supply – 18 [kW] Ljdpfx Adsxrluhswjhb

Condition: excellent (used), Year of construction: 1996, grinding length 600 mm grinding width 350 mm total power requirement 7,5 kW Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : GEIBEL & HOTZ CNC horizontal surface & profile grinding machine model FS 635 - Z CNC year 1996 Grinding length max. (table movement 660 mm) 600 mm Grinding width max. (cross movement 360 mm) 350 mm Mounting height under new grinding wheel 375 mm Distance table – center of spindle min / max 140 – 525 mm Standard size of magnetic plate 600 x 350 mm Table size 820 x 350 mm Max. table load 400 kg Table speed 5 – 35.000 mm/min Cross movement, intermittently 3 – 40 mm Cross-/Vertical quick feed 5 m/min Grinding wheel measurements 300 x 50 x 76,2 mm Grinding spindle speeds, variable 1.000 – 3.000 rpm Grinding spindle-drive approx. 7,5 kW Total electrical load approx. 15 kW - 400 V - 50 Hz Weight approx. 2.600 kg Accessories / Special Features: • SIEMENS CNC control model 840 D with comprehensivel GEIBEL&HOTZ grinding software. User friendly interface, supported by dialog and graphics, simple programming also of complex grinding wheel profiling and easy linking of grinding cycles. • All standard grinding-programms and cycles as surface and multiple surfaces grinding with roughing-finishing-sparkout- return, plunge in grinding, automatic dressing cycle with compensation, etc. • electronic handwheel for 3 axis; cross feed (Z) and infeed (Y) effected by ball screw drive. • Table movement is actuated by belt drive (Z), which allows both very high and very low table speeds and is also ideal for profile grinding. • Hydraulically upwarding diamond dressing device mounted on the left side of the table (also for profile dressing); additional fixed dresser with automatic dressing cycle, including compensation. • Mounted sinus tilting magnetic plate 600 x 200 mm, fine pole division. • Separate paper band coolant filtration unit, separate switch cabinet, lamp for working area, various accessories, manuals, etc. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Ledpfx Asx Haryedwehb Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection of surface grinders – CNC or conventional - available. Please let us know your requirements.

Condition: used, Year of construction: 1995, Surface grinding machine Manufacturer: Jung Model: JA 500 CNC-C Year of manufacture: 1995 Overhauled in: 2003 Grinding length: 500 mm Lhsdpfx Adswp E Rgsweb Grinding width: 200 mm Max. workpiece height: 250 mm Table size X/Y: 600 mm / 200 mm Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Speed: 4,200 rpm Machine weight: approx. 2,500 kg

Condition: used, Year of construction: 1998, Surface Grinding Machine Manufacturer: Geibel + Hotz Model: FS 40 AC Year of manufacture: 1998 Table length: 400 mm Table width: 200 mm Max. workpiece weight on the table: 150 kg Grinding wheel diameter: 225 mm Ljdpfx Adswcym Aswohb Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Machine weight approx.: 1,050 kg Machine dimensions (LxWxH): 1,800 x 1,200 x 2,250 mm

Condition: excellent (used), Year of construction: 1991, max. wheel diameter 10 - 330 mm gear width 180 mm max. module 7 min. module 0,5 clamping length 420 mm number of teeth 10 - 600 ical angle +/- 45 ° turning speeds 1100 - 1900 U/min grinding wheel diameter 280 - 350 mm grinding wheel width 84 - 104 Lhedpfx Ajw I Hq Dodwsb weight of the machine ca. 5,1 t dimensions of the machine ca. 4,5 x 6,0 x 2,3 m

Condition: excellent (used), Year of construction: 1997, max. wheel diameter 820 mm gear width 300 mm max. module 8 min. module 0,5 clamping length 865 mm number of teeth 10 - 600 ical angle +/- 30 ° turning speeds 1100 - 2150 U/min grinding wheel diameter 280 - 400 mm grinding wheel width 84 /104 workpiece weight max. 300 kg weight of the machine ca. 11,5 t dimensions of the machine ca. 6,0 x 4,8 x 2,9 m Lodpfx Adswy H Ihowohb including Reishauer AF Filter, flanges, wheels,...

Condition: excellent (used), Year of construction: 1977, grinding diameter 350 mm grinding length 1000 mm centre height 100 mm grinding wheel diameter 360 mm weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 1,3 x 1,5 m Lhsdpfxount Eyo Adwob Machine in very nice condition, external + internal spindle, many accessories.

Condition: good (used), Year of construction: 1984, Machine is in good working codition. Ljdpfx Ajxvikusdwjhb

Condition: used, Year of construction: 2013, machine/vehicle number: 15513, Polishing machine Gottschild HBS 1600-750-100-1(2) The Gottschild grinding and polishing machine offers a wide range of applications, from the production of high gloss furniture fronts, glass panels to Corian • grinding and polishing. Lhedpfx Aou Afu Djdweb • Easy change between grinding and polishing head • with sinusoidal tool head oscillation, for an even better uniform high- gloss surface which satisfies even the highest demands. • with automatic part detection (machine only designed for rectangular parts) Technical data: • Type: HBS 1600-750-100-1 • Year of manufacture 2013 • Electrical connection 400V, 50 Hz, 4,5 kW, 10 A • Compressed air 6 bar connection adjusted to 5 bar • Conveyor belt 1.600 mm x 940 mm • part width: 90mm- 750mm (without tool brigde 850mm) • part length: 150 mm - 2.800mm • part heights 8-100 mm (extended working height) • Frame size 1600 mm x 1200 mm • Rack height approx. 960 mm ± 25 mm • Frame material welded steel tube • Support for superstructure aluminum profiles • Belt cleaning manual every 8 hours • Safety devices emergency stop. • The machine has to be shielded by protective walls if the machine is delivered without housing. • Polishing motor 400V, 50 Hz, 0,75 kW with planetary gearbox • Control Siemens/Vipa S7 PLC, parameters via KEB Touch Panel • Frequency converter KEB • Control elements control ON/OFF, RESET, START/STOP, program interruption, grinding head speed, oscillation speed and belt speed • Tool bridge: Tool bridge with polishing head, consisting of a linear profile system, driven by linear cylinder. • Without polishing pad for the polishing head Location: on stock PICTURES of an identical machine built in the same year

Condition: good (used), Year of construction: 2007, max. wheel diameter 400 mm gear width 250 mm max. module 8 min. module 0,5 root circle diameter 10 mm number of teeth 5 - 999 ical angle +/- 45 ° weight 12.5 t With Hoffmann filter system: Lhedpfxsyclrpj Adwsb Year of manufacture: 2006 Filter no. 05919 - Type HSF 100 SEK • Grinding wheel flange • 1 grinding wheel • 1 original dressing device • 1 set of dressing wheels • 1 sensor -> Very good condition, only 22,500 operating hours

Condition: new, Year of construction: 2026, Surface Grinding Machine 400 × 1000 The 400 × 1000 surface grinding machine is an advanced solution designed for high-precision flat surface grinding in the machine-building industry. Equipped with automatic feeds on all three axes and a digital readout system, it ensures excellent machining accuracy while maintaining a rigid and robust construction. A key advantage of this magnetic surface grinder is its ability to handle heavy loads up to 600 kg, making it a reliable choice for demanding production applications. Construction and Performance The machine is built on a heavy-duty bed construction that provides high rigidity and effectively minimizes vibrations during operation. The spindle runs at 1450 rpm and is mounted on precision bearings, ensuring stable operation of the grinding wheel with dimensions 350 × 40 × 127 mm. The hydraulic system controls the longitudinal table movement within a speed range of 7–23 m/min, while automatic cross and vertical feeds enable precise motion control. The 406 × 1020 mm working table, equipped with an electromagnetic chuck, facilitates secure workpiece clamping and enhances operational safety. An integrated coolant system with a 0.14 kW pump efficiently dissipates heat, preventing thermal distortion and ensuring dimensional stability. Precision and Productivity Precision is achieved through advanced feed mechanisms and accurate control systems. The automatic intermittent cross feed (0.1–8 mm) and vertical feed increments down to 0.005 mm allow machining tolerances below 0.01 mm, which is essential for components with high dimensional requirements. Productivity is further enhanced by a maximum table travel of 450 × 1130 mm and a cross feed speed of up to 990 mm/min, enabling efficient machining of large surfaces without compromising accuracy. The grinding wheel operates at an optimized speed, ensuring uniform material removal, reduced wheel wear, and a surface finish of Ra below 0.2 μm. The three-axis digital readout system eliminates manual positioning errors, shortens setup time, and increases throughput in production cycles. Technical Data Working table size: 406 × 1020 mm Maximum table travel: 450 × 1130 mm Table T-slots: 14 × 3 mm Longitudinal table speed: 7–23 m/min Maximum distance from table surface to spindle center: 570 (460) mm Maximum load capacity (including chuck): 600 kg Automatic intermittent cross feed: 0.1–8 mm Rapid cross feed: 990 mm/min Handwheel feed (cross): 0.02 mm (0.001") per graduation 5 mm (0.2") per revolution Grinding wheel dimensions: 350 × 40 × 127 mm Grinding wheel speed: 1450 rpm Automatic vertical feed: 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm Rapid vertical feed: 480 mm/min Handwheel feed (vertical): 0.005 mm (0.0002") per graduation 1 mm (0.04") per revolution Lsdpfx Adsycqwwowshb Spindle motor power: 5.5 kW Hydraulic oil pump motor: 2.2 kW Coolant pump motor: 0.14 kW Vertical drive motor: 1 kW Cross feed drive motor: 0.04 kW Machine weight: 4000 kg Machine dimensions (L × W × H): 3300 × 2400 × 2000 mm Standard Equipment 3-axis digital readout Electromagnetic table 406 × 1020 mm Grinding wheel Grinding wheel balancing arbor Grinding wheel flange Tool kit 24V machine lighting Coolant system

Condition: new, Year of construction: 2026, The CORMAK SM75DC belt grinding machine is a high-efficiency industrial metal belt grinder designed for professional metal surface processing where precision and effective dust removal are equally important. Thanks to the integrated extraction system, solid steel construction, and large working surface, the SM75DC model performs excellently in production plants and metal workshops, ensuring a clean and safe working environment. Main advantages of the machine Extraction system with 860 m³/h capacity – effectively removes dust and metal particles during grinding. Two belt speeds (14.5 / 29 m/s) – enable optimal adjustment of grinding speed to the material being processed. Stable steel base – provides rigidity and vibration damping, improving both working comfort and surface quality. Adjustable grinding angle with lock – allows precise positioning of the belt to the workpiece. Quick abrasive belt change system – minimises downtime during retooling. Spring-loaded belt tensioning system – ensures automatic and stable belt tension throughout the operation. Design and technology The CORMAK SM75DC belt grinding machine is designed for continuous operation under demanding industrial conditions. The rigid frame made of thick-walled steel, solid base, and precision belt-tensioning mechanism ensure both stability and long service life. The built-in dust extraction unit with two Ø100 mm nozzles significantly reduces workplace contamination and protects the operator. Precision and performance Equipped with a 75 mm wide and 2000 mm long abrasive belt, the machine provides a large contact area for fast material removal and high-quality surface finishing. Two operating speeds (14.5 and 29 m/s) allow the operator to match the speed to the work material – from rough grinding of structural steel to fine finishing of aluminium or stainless steel components. Applications The stationary CORMAK SM75DC belt grinding machine is ideal for: production and industrial facilities, locksmith and welding workshops, surface preparation and finishing operations, deburring, weld grinding, and surface preparation before painting or galvanising. Standard equipment Stable steel base with adjustable tilt Abrasive belt 75 × 2000 mm Built-in dust extraction system with 0.55 kW motor Anti-spark and dust shields Tilting protective guard Technical data Abrasive belt dimensions (L × W) 2000 × 75 mm Belt speed 14.5 / 29 m/s Motor speed 1420 / 2840 rpm Lhsdpfx Ajycqitsdwjb Main motor power 2.2 kW Extraction motor power 0.55 kW Extraction capacity 860 m³/h Extraction nozzle diameter 2 × Ø100 mm Power supply 400 V / 50 Hz

Condition: like new (used), Machine come with lot of additional equipement. Lhedehvr Hbjpfx Adwjb

Condition: good (used), Year of construction: 1974, internal diameter 25 - 300 mm grinding depth 250 mm swing diameter 50 mm centre height 300 mm internal grinding diameter 25 - 300 mm spindle bore 70 mm spindle speeds 45 - 450 mm inclination 30 ° table movement in milling step automatic 600 mm/min table speed - backwards 0 - 10 m/min spindle turning speed range 3000 - 18000 U/min Ljdpfxoyb S Rvj Adwshb spindle diameter 120 mm total power requirement 12 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 4,0 x 1,9 x 1,8 m

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min relief of the tap 0,03 - 8 mm clamping length max. 1190 mm max. module 10 workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW weight of the machine ca. 7,4 t dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Lhedoyb S Rijpfx Adwsb Many accessories.

Condition: excellent (used), Year of construction: 1997, grinding diameter 80 - 250 mm grinding length 600 mm centre height 175 mm Lhodpfx Adeyb S Rcjwjb longitudinal feed 750 mm workpiece turning speeds 6 - 600 U/min grinding spindle speed 1500 - 3600 U/min cross movement - autom. and by hand 320 mm Control Kelco 80 weight of the machine ca. 4,4 t dimensions of the machine ca. 3,1 x 2,1 x 2,0 m

Condition: excellent (used), thread dia. 10 - 150 mm grinding length 900 mm thread pitch max. 3 mm workpiece diameter max. 260 / 340 mm threading length max. 50 mm Lhsdpfjyb S N Sox Adwob centre distance 1200 mm centre height 1100 mm grinding wheel diameter 275 - 400 mm grinding wheel width 14/20/30/40/50 grinding head-swivable, cross 4 re / 1 li ° max. stroke of grinding wheel 140 mm peripheral speed max. 35 m/sec total power requirement 14 kW weight of the machine ca. 5,8 t dimensions of the machine ca. 5,0 x 2,0 x 2,1 m

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK SG460S 400V Metal Drum Grinder – Advanced Through-Feed Grinding Machine The CORMAK SG460S 400V metal drum grinder is an advanced through-feed machine designed for precise grinding of metal components. With a grinding drum and a working width of 460 mm, this model is ideal for serial production and facilities that require high-quality surface finishing. It is especially effective for processing small parts after welding or laser cutting. Key Advantages of the Machine 120 mm grinding drum ensures even grinding without risk of burning or scratching Conveyor belt provides smooth transport of the workpiece and stable guidance under the grinding unit Adjustable feed speed from 0 to 4.0 m/min allows adapting the working pace to the material type Dust extraction system with a Ø100 mm outlet ensures efficient dust removal, improving working conditions and component longevity Robust industrial construction (148 kg) guarantees machine stability even during intensive use Design and Technology The SG460S model is designed for stability, precision, and durability. The main frame is made of steel, providing resistance to vibration and deformation. The main 3.0 kW motor drives the grinding drum at 2800 rpm, enabling effective removal of excess material and burrs even in hard steel grades. The 60 W feed motor works with a speed controller, allowing the operator to precisely control the grinding process. The large conveyor belt width of 465 mm enables processing wide elements in a single pass, minimizing operating time. Precision and Work Efficiency The machine provides precise control over the thickness of the processed workpiece in the range of 5 to 80 mm. The grinding belt speed of 14 m/s ensures high surface quality without burning effects. The drum diameter and working length (465 mm) translate into even contact pressure and a uniform final result. Standard Equipment 120 mm grinding drum Conveyor belt width 465 mm Main motor 3.0 kW Lhedpfxoycfzkj Adweb Feed motor 60 W Dust outlet Ø100 mm Worktable height adjustment Optional Equipment Metal dust and chip extraction system Grinding belts of various grit sizes Automatic material feeding system Technical Specifications Main motor power: 3.0 kW Voltage: 400 V Grinding drum speed: 2800 rpm Grinding drum belt size: 2760 × 75 mm Conveyor belt size: 1120 × 450 mm Worktable size: 460 × 465 mm Dust outlet diameter: 100 mm Conveyor feed speed (variable): 0–4 m/min Max. workpiece height: 80 mm Min. workpiece height: 5 mm Max. workpiece width: 460 mm Grinding drum dimensions (Ø × length): 120 × 465 mm Feed motor power: 60 W Machine dimensions: 880 × 720 × 1230 mm Net weight: 148 kg

Condition: used, Year of construction: 2012, grinding length 1000 mm grinding width 600 mm workpiece height 400 mm table-size 1.100 x 500 mm max. table load 1.000 kg dist. center of grinding spindle - table 600 mm table travel longitudinal 1400 mm table travel cross 550 mm table feed 1 - 30 m/min turning speed range - grinding wheel 1.000 - 3.000 U/min power capacity - grinding motor 11,0 kW grinding wheel size 400 x 80 x 127 mm magnetic clamping plate 1000 x 500 mm dressing device Tischabrichter voltage 400 V total power requirement 21 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 4,30 x 2,95 x 2,55 m band filter unit 1,80 x 1,30 x 0,80 m hydraulic power unit 0,90 x 0,75 x 0,95 m suction device 1,10 x 0,60 x 0,70 m Lodpfxoya Ihhj Adwjhb - Serial-No.: Available at end of january 2026 - autom. vertical feed - table dresser with compensation - electr. hand wheel - paper band filter unit with magn. separator - coolant mist extraction unit

Condition: used, Year of construction: 2003, Technical details: grinding diameter: 350 mm grinding length: 600 mm centre height: 175 mm grinding wheel hole diameter: 127 mm dimensions of grinding wheel: 400 x 50 mm Lhsdpfx Adoya Ekmoweb grinding spindle speed: 1.500, 1.700, 2.200 1/min work piece spindle speed: 6 - 600 1/min max. workpiece weight between centres: 150 kg grinding head swivelling: -30 bis +120 Grad grinding head swivellable ° table swivelabel ° table adjustment - longitudinal: 905 mm automatic feed per table reverse control:: 0,001 - 0,030 mm feed - continual: 0 - 0,99 mm table speeds: 0 - 6 m/min taper in tailstock: MK 4 tailstock travel: 30 mm diameter of internal spindle: 80 mm spindle drive motor: 3,6 kW spindle cone: MK 5 total connected load: ca. 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 3,2 x 2,1 m universal cylindrical grinding machine, internal grinding attachment incl. spindle, HEIDENHAIN DRO in 2 axis, balancing device ELASO EB 2000, ASYST APNC 400 NC-dressing and programming unit, cooland device incl. paperfilter, manuals (German language), a lot of accessories (grinding wheels (external+internal), steady, pusher dog, collets, chucks, balancing device, dresser...) MACHINE FROM TOOLSHOP, BARELY USED ! *

Condition: excellent (used), grinding length 600 mm grinding width 250 mm workpiece height 450 mm Control Siemens Primo SG magnetic clamping plate, electical 500 x 200 mm grinding wheel diameter 300 x 50 x 76,2 mm spindle turning speed - stepless 800 - 4200 U/min total power requirement 4 kW Lsdpfx Asya Iifjdwshb weight of the machine ca. 2,9 t dimensions of the machine ca. 4,8 x 3,6 x 2,1 m