Used Round Timber Sorting Dare for sale (4,894)

Condition: new, Year of construction: 2026, Kudu automatic drilling machine with NC control and manual tool change (3-axis) automatic drilling machine with a mobile processing unit - the table remains stationary, the drilling head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The system is programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Stable machine base • Drilling head speed: up to 2800 rpm • Tool holder: HSK 50 • Drive of the X, Y and Z axis via servomotors • Rapid traverse in the X Axis: 18 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance between the top edge of the table and the bottom edge of the tool holder 245 mm • Table width 450 mm • Working height: 1005 mm • Drilling diameter: 3 to 15 mm in St. 50 (depending on the tool) • Machining path in the Y-axis: 230 mm • Tolerance in the X-axis: +- 0.1 mm/m • Tolerance in the Y-axis: +- 0.05 mm • Tolerance in the Z-axis: +- 0, 05 mm • System weight: 2000 kg • System dimensions: 8000 mm x 2000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Simple programming of the machine • Cooling takes place by means of a minimum quantity spray system • Without material clamping vices • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming and operation It is always possible for you to inspect the desired system in our production/demonstration hall. Lodpefu Iwmefx Ackeab Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The drilling machine can be used both manually and fully automatically. After each drilling process, the system moves fully automatically in the X and Y axes to the next drilling position in the standard version. ADVANTAGES Potential operator errors are drastically reduced. Programming takes just a few minutes. Significant reduction in manpower. product details Laedpfxofu Swxs Ackob Standard measuring lengths: 3,000mm 6,000mm Drill: Unimax 3 T AV (alternatively also with Unimax 4 Basic) Continuous drilling capacity in E 335 25 mm Normal drilling capacity 30 mm Thread cutting capacity M 20 Spindle MT 3 Automatic feeds (3T AV) 30 – 400 mm/rev Drilling depth 125 mm Column diameter 110 mm Weight 250kg Pole-changing motor 0.8/1.5 kW UNIMAX 3T/3T AV M00023/M00009 Spindle speeds infinitely variable Range A 80 – 1,400 rpm Range B 180 – 3,200 rpm motorized height adjustment, anti-twist device Optional: thread cutting device Fully automatic execution Automatic positioning of the X-axis Automatic positioning of the Y-axis Automatic drilling process Total length: 7,500mm Manual drilling is possible Coordinate table with motorized drive for the Y-axis via the control Travel of the Y-axis 200 mm Movable clamping table with motorized drive for the X-axis via the control X-axis travel: 3,000 mm Clamping table with groove for clamping the pneumatic clamping pieces and material support blocks. 2-axis control with memory control with 3,000 memory options Minimum quantity spray system with spray head and holder It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 E Fully automatic drilling machine, measuring length 6000mm (2-axis NC drilling machine) Item No. 6019 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X and Y values ​​or calling up a program that has already been written, the machine works completely independently. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 2-axis control incl. LAN interface for data transmission Pneumatic vice (span 200 mm) Alternatively also available with 300 mm. Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV Alternatively also with Unimax 4 Basic (For technical data see data sheet) anti-rotation device tapping device motorized height adjustment NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile as dirt protection Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / Mounting bracket / roll width 407 mm / insert plates / struts Ledpefu Irzjfx Ackjab Roller diameter 50 mm / steel rollers It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 H Fully automatic drilling machine, measuring length 6000mm Item No. 6020 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X values ​​and calling up a program that has already been written, the machine works completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 1-axis control Pneumatic vice (span 200 mm) Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV (for technical data see data sheet) anti-rotation device motorized height adjustment tapping device NC positioning system PD 200p Feed force 200 kg Lasdpfx Acofu Itbskeb Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile to protect against dirt Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / mounting bracket / roller width 407 mm / insert plates / struts / roller diameter 50 mm / steel rollers

Condition: good (used), mileage: 8,99,799 km, power: 552 kW (750.51 HP), first registration: 09/2016, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2016, Equipment: AdBlue, Bluetooth, EBS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, parking heater, power mirror, seat heater, soot filter, spoiler, trailer coupling, = Additional Options and Equipment = - Adaptive cruise control - Aluminum fuel tank - Rear work lights - Brake booster - Roof spoiler - EPS (Electronic Power Steering) - Remote central locking - Low noise - Tipping hydraulics - Refrigerator - Air suspension - Air-suspended seats - Metallic paint - Particulate filter - Radio/CD player - Rain sensor - Sunroof - Sleeper cab - Side door - Seat heating - Lane departure warning - Stability control - Auxiliary heater (parking heater) - Toolbox - Xenon lighting = Further Information = Lasdjxwnnbepfx Ackob Axle Configuration Suspension: Air suspension Front axle 1: Steered Front axle 2: Steered Rear axle 1: Lift axle Weights Unladen weight: 14,380 kg Payload: 20,620 kg Gross vehicle weight: 35,000 kg Condition Technical condition: good Optical condition: good Warranty Warranty: No liability for printing or typing errors; subject to change, prior sale, and mistakes! Identification Reference number: 23 For further information Please contact Emad Al Shogran for more details. Vehicle number: 23 VOLVO FH 750 / 8x2 / Loglift BF118S / Euro 6 .: YV2R0P0G2GA793597 Transmission: Automatic Suspension: Air / Air (full air) Air conditioning Engine brake Cruise control Parking heater Distance control assistant Lane departure assistant Navigation system Xenon lighting EURO 6 emission standard CRANE: Brand: Loglift Type: BF118S000074 Year: 2016 = Company Information = No liability for printing or typing errors; subject to change, prior sale, and mistakes! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email.

Condition: new, Attachment suited for: Construction machines Sorting(sceleton) buckets for every machine/model Lodspa Rtispfx Ackjab For detailed information please contact us

Condition: new, Year of construction: 2025, Hyundai HX225 Heavy Duty Screening Bucket Blade Length: 1200 mm Ledpfsxw H Nwsx Acksab Capacity: 1 m³

Condition: new, Bucket Type: Skeleton Bucket (Screen Bucket) Machine: CAT320 Edge Length: 1550mm Capacity: 1.35m^3 Lsdetqyvgjpfx Ackeab For detailed information and inquiries please contact us

Condition: new, Attachment suited for: Construction machines Cargo space capacity: 1.350 l Lodpfx Acon Tm Iuokeab Selling price: € 8.000, US$ 8.475 Volvo L60 Wheel Loader Log Grapple Volvo L60 General Purpose Bucket For detailed information please contact us

Year of construction: 2023, condition: new, One piece available from stock Edge, side edge, wear parts are Hardox CW BRACKETS ARE ALSO HARDOX(This is very important) Bracket Type: CW30 Edge Length: 1200mm Capacity: 1 m^3 Weight: 800kg Laodpfxopq Tbio Acksb Teeth-Adapter: CAT J250 3252-RC

Year of construction: 2023, condition: excellent (used), Faste NS/100 broccoli sorting line. Condition: very good. Laodpfx Acoyuu Rreksb

Condition: new, Year of construction: 2026, SEMI-AUTOMATIC DRILLING RIG “UNIBORFIX 50” With the UniBohrFix 50 drilling system, all profiles can be machined against a stop or with grippers. The Drilling is done manually using the lever, with the materials on the X-axis automatically pointing to the drive to the next drilling position. Easily drill entire programs or work with the stop plate quickly carry out individual drillings. The system is suitable for weights up to 100 kg. The facility also contains a minimum quantity spray unit with holder and spray can. The technical data of the standard version can be found in the table. If necessary, all components of the system can be adapted to your requirements. You can choose between different drilling machines, roller conveyors, select positioning systems and vices. Plantec configures the system so that it suits you perfectly! ADVANTAGES A sequence of holes is automatically executed at precise intervals. Potential operator errors are drastically reduced. Programming takes just a few minutes. Very good value for money. Significant reduction in manpower. Standard measuring lengths: 3,000mm 6,000mm Drill: Unimax 2 T Spindle MK2 Continuous drilling capacity 18 mm Speed ​​ranges: 100-2000rpm, 200-4000rpm Projection 225 mm Spindle/table distance 60-400 mm Adjustable vice with measuring linear display Positioning length stop: PD-100e control for automatic positioning Positioning: absolute or chain dimensions Easy to read LED display Trolley with DC servo motor Positioning accuracy +/- 0.1 mm/m Attachment arm with spring damping Stop plate with groove Memory control with 3,000 memory options Roller conveyors: RD-200/3 load capacity 200 kg/m Roll width 290 mm Roll diameter 40 / 50 mm insert sheets Struts for stabilization switch cabinet Available options: Minimum quantity spray system with spray head and holder Lsdpfx Ajgwt Slscksab Gripper tongs for clamping the material on the stop plate

Condition: used, Year of construction: 2022, operating hours: 184 h, functionality: fully functional, Zum Verkauf stehen zwei gebrauchte Modula VertikalLift MC25D in der Version 1.4. zu je 39950€ netto. Beide Anlagen sind voll funktionsfähig, wurden regelmäßig gewartet und können nach Absprache im laufenden Betrieb besichtigt werden. Ideal zur platzsparenden und effizienten Lagerung von Kleinteilen, Ersatzteilen oder Kommissionierware. Anbei die Spezifikationen der beiden Maschinen, Baujahr 2022, je nur 23 Tage Betriebszeit. Modell: Modula VertikalLift MC25D, Version 1.4 Anzahl: 2 Lifte Baujahr: 2022 Betriebszeit: je ca. 23 Betriebstage Abmessungen zusammen in mm: 6300 (l) x 7300 (h) x 3000 (b) Zustand: gebraucht, technisch einwandfrei Verwendung: automatisches vertikales Lager- und Kommissioniersystem Einsatzbereich: Lager, Produktion, Versand, Ersatzteillager Kosten / Organisation: 3000 * 6300 * 7300 Abbau: ca. 6.000 € durch Hersteller Transport in DE: ca. 2.000 € Lsdpfxsyx U I Ts Ackjab Abbau und Transport können nach Absprache über Modula bzw. spezialisierte Dienstleister organisiert werden, Koordination unterstützen wir gern. Wartungsprotokolle vom 17.10.2025 vorhanden

Condition: like new (used), functionality: fully functional, Stainless Steel Roller Washer + Roller Sorting Lasdpsynkknsfx Ackob

Condition: new, Type: Motorized Working length: 1.050 mm Roller diameter: 110 mm Pre-bending capacity: 4 mm Bending capacity: 5 mm Motor: 2,2KW Laodpfx Aceug Un Eskeb Minimum bending diameter: 150mm Upper and lower roller driven by a single gear system. Rollers with SAE 1050 quality certificate of high tensile strength. Conical bending system Induction treated and hardened rollers Wire grooves at the end of the rollers.

Year of construction: 2025, condition: new, 1) Climbing conveyor belt: - Long 12000mm, working width 900mm - Hopper length 3000mm width 2000mm, height 1500mm from the ground, - Climbing angle approx. 16 * - EP 400/3 rubber band with 32mm sleepers - Inverter controlled transmission speed up to 0.3 m / s - Conveyors with safety stop 2. Sorting table: - conveyor belt length 15000mm, working width 950mm, - height 1300 mm to the upper part of the belt, - height 1400 mm to the upper part of the sides (10 cm hoh walls), - the conveyor sides are made of galvanized steel, - the rubber band EP 400/3 smooth - the sides of the conveyor 100mm, - the height of the funnel 600mm, width 1000mm - the speed of the conveyor is set by the inverter to 0.4 m / s regular - Safety stop switch 3. Steel grandstand with WEMA grids: - Stand length 15,000 mm - Width of the grandstand is 3200mm - Stand height 2500 mm from the floor, - with grating stairs on both sides of the conveyor made of WEMA grating, - on steel legs number of 12 pcs, - Number of boxes 5 pcs, Laodod N Hiispfx Ackeb - Number of slides 10 pcs, - Slide dimensions: 400 mm x 1000 mm, - Under the slide, attachments for big bag - on a winch. 4. The line is painted with two layers of paint. 5. RAL orange color 2011 6. Sorting line connected with a switch box, wire-shaped stop switches and a 32A / 5 and 15m long plug of a power cable with rubber insulation is equipped 7. The sorting line has a 24-month warranty 8.

Condition: used, mileage: 7,30,552 km, power: 368 kW (500.34 HP), first registration: 05/2018, fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 590 l, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 68,000 mm, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - Air suspension - Air-suspended seats - PTO (Power Take-Off) - Radio/multimedia system - Warning beacon - Disc brakes - Sliding sunroof - Sleeper cab - Seat heating - Sun visor - Lane departure warning system Lsdpfxsylnpcj Acksab - Auxiliary heater - Pre-heating system - Toolbox - Windshield Internal reference number for customer inquiries: 4-264 MAN TGX 26.500 6x4 Short Log Truck Complete with TajfunLiv 150Z 9.6 Loading Crane. Vehicle Description: Truck: MAN TGX 26.500 6X4 BL, wheelbase 4500 mm Engine: D2676LF51 - 500 HP / 368 kW, EURO 6 SCR - 2500 Nm, C-R OBD-C Transmission software for off-road use (TipMatic OFFROAD) ZF 12 TX 2821 OD MAN TipMatic gearbox with ZF Intarder PTO 2 NA NTX/10 without flange f=0.96 top and NTX/10 with flange f=1.31 bottom Parking brake with pneumatic application of the front axle brakes Cab with medium-height high roof "XLX", 2440 mm wide, 2280 mm long Equipment packages Comfort Package 1 Driver MAN Media Package Navigation Driver's comfort seat, air-suspended, with lumbar support, shoulder adjustment, and heating Additional air heater EBERSPÄCHER D4S Air conditioning AC R134A CFC-free with automatic temperature control 1 sleeper bunk with storage (aluminum frame) Mattress for lower sleeper bunk Radio MAN Media Truck Advanced 12V with 7" display and navigation preparation Navigation SD EUROPE FULL "Comfort" hands-free functionality for 2 mobile phones (supports MFL and Bluetooth®) Body: OptiPa bolster body 4 ExTe D5 bolsters with 8 ExTe aluminum telescopic stakes Robust steel front wall Access on passenger side Access box on driver side Toolbox on passenger side Two snow chain holders New tire cover tarpaulin Crane: TajfunLIV 150Z 9.6 TAJFUN LIV fully hydraulic timber loading crane Classification according to EN12999 Declaration of conformity CE version Color: black Reach 9.60 m (double extension), lifting moment 141 kNm Internal hoses in telescopic sections Slewing gear Slewing range 425° Control block PARKER H170CF Telescopic stabilizers Support legs swiveling upwards to 45° Rigid stabilizer pads Support leg control with electrohydraulic Danfoss PVG 32 valve Dead center above cab Dual circuit system Toggle lever on lifting cylinder Lifting cylinder guard Operating hours counter Spotlight on knuckle arm Spare parts catalog and user manual in German Continuous rotator 10 t Seat heating LED work lights Inclination switch Start / Stop function - Linear lever control (4+2) - Grapple GO53x This offer is non-binding. Subject to prior sale, errors, and changes. General Information Cab: Long-distance traffic Technical Information Number of cylinders: 6 Engine displacement: 12,419 cc Gross vehicle weight: 26,000 kg Axle Configuration Brakes: Disc brakes Front axle: Tyre size: 385/65-22.5; steered; suspension: leaf spring Rear axle 1: Tyre size: 315/80-22.5; differential lock; suspension: air suspension...

Condition: new, power: 434 kW (590.08 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 4,750 mm, fuel: diesel, fuel tank capacity: 700 l, brakes: retarder, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 68,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - Adaptive cruise control system - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Leather interior - Alloy wheels - Air-suspended seats - Particulate filter - PTO (Power Take-Off) - Radio / multimedia system - Reversing camera - Disc brakes - Sliding roof - Sleeper cab - Seat heating - Sun visor - Stability control - Auxiliary heater - Pre-heating system - Toolbox - Windshield Internal Reference for Customer Inquiries: 2025-076 SCANIA R 580 6x4 with loading crane Epsilon TZ15 98 or Tajfun LIV L150Z (96) Platform made of steel frame and checker plate 8x OptiPa telescopic stanchions Solid steel front wall Loading length: 6,800 mm Engine: DC16 121 V8, 590 HP, EURO 6E Transmission: G33CM, Number of reverse gears: 4 Opticruise Economy, Standard, Power (Opticruise by Scania is an automated shifting system for manual gearboxes) Clutch pedal manual + automatic (3-pedal Opticruise) Scania Retarder R4700D with freewheel function, retarder control manual + automatic Differential lock Wheelbase: 4,750 mm + 1,350 mm Suspension: leaf/air Trailer coupling: Ringfeder 4040/G150 40 mm D=137 kN Tires: FA 385/65R22.5, RA 315/80R22.5, NLA 315/80R22.5 Cab: CR20H, Scania Highline Emergency brake assist system Lane departure warning system Predictive cruise control LED headlights (high beam, low beam, daytime running lights, and indicators with LED technology) Driver's seat type: Premium, V8 leather, black with red stitching, ventilated and heated driver's seat Bed: dimensions 800 mm x 2,000 mm Leather steering wheel (flat bottom) Infotainment system, premium 7" display Radio with digital radio reception (DAB) Navigation, European map data Scania Communicator C300 CB radio: Stabo XM 3004 Storage under the bed, driver's side with refrigerator Electric roof hatch and much more. Financing / hire purchase, as well as leasing / partial amortization lease are available with our leasing partner. Our sales team will be happy to answer any further questions you may have. This is a non-binding offer. Subject to prior sale, errors and changes. General Information Cab type: Long distance Technical Information Number of cylinders: 8 Engine displacement: 16,353 cc Gross Vehicle Weight (GVW): 26,000 kg Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65-22.5; Steered; Suspension: leaf suspension Rear axle 1: Tire size: 315/80-22.5; Differential lock; Suspension: air suspension Rear axle 2: Tire size: 315/80-22.5; Differential lock; Suspension: air suspension Functional Crane: Palfinger / TajfunLIV Epsilon TZ15 98 / L150Z 9.6, rear mounted on chassis Lasdpfx Asylxt Eocksb Interior Upholstery: Leather Condition General condition: Very good Technical condition: Very good Optical condition: Very good Damages: None

Year of construction: 1980, condition: good (used), functionality: fully functional, For sale: dry lumber sorting line, fully dismantled and ready for transport. All components have been meticulously marked according to their positions and packed in transport crates to ensure smooth logistics and hassle-free installation. Complete assembly drawings are available, and we are happy to provide further information, photographs, and technical specifications upon request. Please also note that a green (fresh timber) sorting line will soon be available for sale, which can be connected to this dry sorting line if needed, forming an integrated and efficient production system. Specification: Fall Pocket Dry Sorting Line The line includes the following main components: Pos 10. Intake for packages with tilt hoist, destacking, and unscrambler Pos 20. Side conveyor for boards directed to operator for quality inspection Pos 30. Trimmer Pos 40. “Top” conveyor over the pockets Lodpeytc A Tsfx Acksab Pos 50. Fall pockets Pos 60. Side conveyor under the pockets Pos 70. Elevators before the packing machine Pos 80. Complete packing machine Pos 90. Press and strapping unit with infeed and outfeed conveyors Pos 100. All existing electrical and electronic equipment related to the line

Condition: new, axle configuration: 2 axles, suspension: steel, color: other, Suspension: leaf spring suspension Rear axle 1: Tyre tread left: 100%; Tyre tread right: 100% Lajdpfoyzgmmjx Ackjb Rear axle 2: Tyre tread left: 100%; Tyre tread right: 100% Damages: none

Condition: new, Year of construction: 2026, max. working width: 1350 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Length: mm Width: mm Height: mm Lasdpfsx S Dxbsx Ackjb Machine weight: kg Standard configuration Extended machine accessories

Condition: ready for operation (used), functionality: fully functional, Condition: used / very good Availability: immediately Description: Keyence LJ-V7080 laser profile sensor (measuring head) from the LJ-V7000 series. Suitable for precise profile and height measurements. Scope of delivery: measuring head LJ-V7080 only (without controller / without accessories) Lodpfx Ajyx Spneckeab Location: Vöhrenbach - Germany Price: €800

Condition: used, Tool steel, round material, shaft cut Shaft, steel block, sawn shaft Cold work tool steel 1.2842 Material section Ø 400 mm x length 165 mm Lajdpfx Acsgmi U Sskeb Net weight: approx. 160 kg Material number: 1.2842 Material designation: 90MnCrV8 Cold work tool steel with high hardenability and good dimensional stability during hardening Used in toolmaking for cutting, punching, and embossing tools. Rollers and profile rolls, measuring tools, guide rails, paper cutting knives. Condition on delivery: annealed to max. 229 HB Tensile strength as delivered: 770 N/mm² Hardening: 790–820 °C Tempering: 220–260 °C Working hardness: 58-62 HRC Soft annealing: 680-720 °C - Medium alloyed cold work tool steel - Oil-hardening 4 pieces available, price per piece.

Condition: used, Year of construction: 2012, Rotary sorting grab Verachtert – Type VRG/30 . 2D – CW40 – for machines from 25 to 32 tonnes – weight 1875 kg – year of manufacture 2012 – max. rod size 350 Lsdpeyy U Hljfx Ackjab = Further information = Year of manufacture: 2012 Suitable for: construction machinery Contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: good (used), Year of construction: 2018, Wide Range DWR Round labelling machine 2018, semi auto labelling machine for cylindrical products, max label width 200mm, up to 40 different software programmes, up to 1200 units per hour capacity, Lasdpfxjyti I Nj Ackjb