Used Round Turntable for sale (4,334)

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) Isdpfeykub Ajx Aqpjtg ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 2004, condition: used, bar material dia. 6 - 120 mm Bar length 100 - 1.600 mm bar weight max. 63 Kg feed length 1.000 mm longitudinal adjustment 600 mm machine weight ab. 600 kg Itjdpfxsyhhrio Aqpeg dimensions of the machine ca. 2,2 x 1,5 x 1,5 m Current operating hours display: 4867 hours

Condition: new, Year of construction: 2025, load capacity: 1,200 kg, Equipment: foot remote control, 1200 kg Load Capacity Welding Positioner, CE Certificate Load capacity horizontal: 1200 kg Load capacity tilted: 1200 kg with a load center at 250 mm Very robust Continuously adjustable speed from 0.05 to 0.7 rpm (higher speeds available at extra conversion cost) Iedpfxsxq S Nis Aqpotg Turntable diameter: 1200 mm Tilting up to 120° Height horizontal: 1,050 mm, tilted up to center: 880 mm Hand and foot remote control Dimensions: 1.35 m (length) x 1.2 m (width) Chuck or quick-change chuck available for extra charge, depending on size As shown, diameter 1000 mm, price: €2,900 (special price, only available when purchased with the welding positioner) Counter bearing with steps: €480, counter bearing with screw adjustment: €880; load capacity 4000 kg

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,500 kg, Perforated Table 1200 x 2400 x 200 mm Tabletop thickness: 20 mm, borehole diameter: 28 mm Includes wireless remote control Swivel range: 360° Height adjustment: Hydraulic motor, 800 to 1200 mm Rotation speed: 0.5 rpm Motor power: 0.75 kW We offer tables in various sizes and load capacities: Itsdpfx Aqsx Thyropjg - Load capacity 500 kg, dimensions: 1000 mm x 1500 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 1000 kg, dimensions: 1000 mm x 2000 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 1500 kg, dimensions: 1200 mm x 2400 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 2000 kg, dimensions: 1200 mm x 2400 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 3000 kg, dimensions: 1200 mm x 2400 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 5000 kg, dimensions: 1500 mm x 3000 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic

Condition: new, Year of construction: 2025, Column lift rotary device 1 tonne load capacity Protec turning device / positioner Syncrolift Double column, remote control wireless and manual Column adjustment: 2x movable Ijdpfx Aqox Thvyopotg Load capacity: 1000 kg Minimum working height: 600 mm Maximum working height: 1500 mm Speed: 1 rpm Clamping plate diameter: 500 mm Rotary drive: 0.37 kW Upon request, 2 to 10 tonne load capacities available

Condition: good (used), machine/vehicle number: 5336, carrying power: 6000 kg Itedpogbt Sqofx Aqpjg surface plate measures: 1500 x 1500 mm dumping area: horizontal bis - 145 ° turning speed: 0 - ca. 1 Upm electrical connection: 400 V, ca. 5 kW space needed: 2800 x 2350 x 3250 mm weight: 5000 kg

Condition: used, machine/vehicle number: 7016, Table Ø: 320 mm Overall height: 103 mm Center hole: MK 4 Iodpfx Asb Nxprsqpotg Space requirement: 400 x 500 mm

Condition: used, machine/vehicle number: 9029, table size: 400 mm Ø height: 135 mm dimensions: 500 x 500 x 135 mm Itjdpfx Ao N Ra Rsqpeg

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 5010 € 96.69 € 100 kg 150 mm 150 mm 360 ° 120 kgm 230 / 50 V / Hz 0.25 kW 0.25 kW 0.1 - 3 U/min 30 s 350 mm M12x6 mm 690 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) Itjdpfxsx Urqwj Aqpog OPTION: Pneumatic centering attachement

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 24400 € 468.48 € 3000 kg 150 mm 150 mm Itodpex Urqdsfx Aqpog 360 ° 135 kgm 400 / 50 V / Hz 1.1 kW 1.1 kW 1200 mm 700 - 950 mm The hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted to the floor. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. The rotation speed can be adjusted via a potentiometer.

Condition: new, Year of construction: 2025, neu 2025 020157 prompt, Zwischenverkauf v Türkei 6320 € 121.98 € 1 250 kg 150 mm 150 mm 360 ° 360 kgm 230 / 50 V / Hz Ijdpfxsyq St No Aqpetg 0.37 kW 0.25 kW 0.1 - 3 U/min 30 s 600 mm M16x6 mm 550 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 11000 € 211.2 € 1000 kg 150 mm 150 mm 360 kgm 230 / 50 V / Hz 0.55 kW 0.75 kW 0.1 - 3 U/min 60 s 1200 mm M20X6 mm 1000 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. Iodpfxeyq St Ao Aqpetg The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 7730 € 149.19 € 500 kg 150 mm 150 mm 360 kgm 230 / 50 V / Hz 0.37 kW 0.37 kW 0.1 - 3 U/min 45 s 800 mm M20X6 mm Itodpfeyq Stvjx Aqpeg 640 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZRLM01, overall weight: 500 kg, total length: 1,750 mm, total width: 800 mm, total height: 1,450 mm, space requirement length: 2,000 mm, space requirement width: 1,000 mm, space requirement height: 2,000 mm, power: 1.2 kW (1.63 HP), fuel type: electric, Equipment: CE marking, The Automatic Labeling Machine is a sophisticated piece of equipment used in various industries for applying labels to products, containers, packages, or other items. These machines are designed to enhance productivity, accuracy, and efficiency in the labeling process. Itjdsxum H Dspfx Aqpsg

Condition: new, Year of construction: 2023, overall weight: 675 kg, load capacity: 500 kg, This is a turntable with two axes for industrial robots of the KUKA brand Itedpsrupi Rjfx Aqpsg

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 662 kg, load capacity: 500 kg, This is a turntable with two axes for ABB brand industrial robots Itedsrupkcepfx Aqpsg

Condition: new, Cesurbend 3-roll round bending machine MRS 1250 x 140 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment digital display sheet width 1250 mm sheet thickness 5,5 mm max. sheet thickness 5,0 mm bending roll length 1250 mm roll diameter 140 mm weight 1150 kg dimension L-W-H 2020 x 900 x 1200 mm motor: 2.2 KW Iodpfx Aoh Timpsqpetg Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line CE mark

Condition: excellent (used), Rounding machine tool for poles/stakes production. Diameter of finished product from 40 mm to 140 mm. Machine tool was renovated. New bearings, new back side shoulders gears, renovated electrical cabinet and installed new optical sensor for pneumatic pressure, partly renovated pneumatic system (3 new cylinders). Ijdpfx Aouvg Hteqpjtg

Condition: new, Cabinet with 7 drawers; flat, round, and bushing ejectors, approx. 1,000 pieces. Price per piece: €10 Iedpfx Asxz Ry Ueqpetg

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Demmeler Robotix L Manipulator 3-Axis 360° rotation, 360° tilting (overhead), with height adjustment (virtually silent) Excellent condition (like new) Minimum height: approx. 486 mm (tilting axis 0° horizontal) Maximum height: approx. 1438 mm (tilting axis 0° horizontal) Minimum height: approx. 525 mm (tilting axis vertical) Iodjyupl Depfx Aqpotg Maximum height: approx. 1477 mm (tilting axis vertical) Lower arm length 1500 mm (radius) Upper arm length 1900 mm (radius) Connection: 16 A plug Overall height 3250 mm Rotational speed approx. 0.2 - 2.0 rpm Torque 24000 Nm Lifting speed 1.5 m/min Handheld remote control

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, load capacity: 2,000 kg, SEVERT Double-Column Positioner S 40.1-1HH, 2 complete sets available with full documentation Itjdpfx Aqjyupkyepog For welding or assembly applications Can also be used as a single column elevation and rotation unit (mono configuration) Total load capacity: 2000 daN Load capacity per column: 1000 daN Torque of clamping plate 1: 1400 Nm Clamping plate 2: free rotation without drive Clamping plate rotational speed: 2.0 min⁻¹ Clamping plate 1 dimensions: W1070 x H720 x D30 mm, Part No. 20452-001 Clamping plate 2 dimensions: W1070 x H720 x D30 mm, Part No. 20453-001 Vertical stroke: 680 mm Lifting speed: 2200 mm/min Welding current return: 400 A Dimensions (B2): Column 1 with base: Length: 970 mm Width: 885 mm Height: 2350 mm Net weight: 1200 kg Column 2 with carriage: Length: 970 mm Width: 1030 mm Height: 2350 mm Net weight: 1600 kg Excellent condition, complete documentation included We have multiple column elevation/rotator units in stock with load capacities from 1 ton up to 15 tons 2 complete sets (units) available

Condition: excellent (used), load capacity: 4,000 kg, Equipment: foot remote control, Heinrichsglück 4 ton load capacity, TOP condition 4000 kg capacity welding positioner, complete set Horizontal load capacity: 4000 kg, tilted: 4000 kg Infinitely variable tilt and speed adjustment Very robust construction Speed continuously adjustable from 0.05 to 1.5 rpm, digital display Table diameter: 1500 mm Height horizontal: 1230 mm, tilted to center: 1000 mm Length 2.0 m x width 1.6 m Hand remote control and foot pedal Itjdpjyuph Ejfx Aqpog

Condition: excellent (used), functionality: fully functional, load capacity: 1,500 kg, Equipment: foot remote control, 3-axis PEMA welding positioner APS 1500 - stepless height adjustment - includes hand-held remote control - maximum load 15,000 N (1,500 kg) - rotation speed 0.07 - 1.3 rpm - rotational torque 1,000 Nm - hydraulic tilting up to 135° - tilting torque 3,000 N Iodpfxjyupd Hj Aqpstg - max welding current 700 A - plate diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm - power supply 3 x 400 V / CEE 16A - weight 730 kg

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Ijdpfxohwrhue Aqpotg Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, table diameter: 1,000 mm, – Horizontal capacity: 1200 kg Itodpfoliftnex Aqpsg – Vertical load capacity: 600 kg – Table size: 1000 mm – Electrically tiltable – Cable remote control – Digital display – Documentation – 400V