Turntable lining

unbekannt Durchmesser 250 mm

Condition: used, Three-jaw chuck, three-jaw lathe chuck Nedpfx Ajduab Noa Dewb -Chuck size: Ø 250 mm -Rezess: Ø 194 mm -Hole circle: 3 x 214 mm -Throughout: Ø 70 mm -Weight: 17 kg

Condition: new, Year of construction: 2024, load capacity: 300 kg, Welding turntable KT 300 Horizontal load 300 KG, tilted 150 KG Power consumption 220V, 50 Hz Table diameter 450mm Height 500mm Infinitely variable tilt range via crank gear motor 0 - 90° Speed 0.3 to 2.5 rpm Nedpfx Aaec Ug Tlj Dowb Incl. foot remote control Surcharge: Quick-release jaw chuck Diameter 300mm, 450.-€

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -hard: interchangeable jaws -Bayonet short cone flange: cone size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm -Throughout: Ø 70 mm Njdpfx Aaeduacnj Dswb -Weight: 28 kg

Condition: used, Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 250 mm -Hole circle: Ø 224 mm/M12 -Passage: Ø 76 mm -Dimensions: 300/300/H mm -Weight: 40 kg Njdof A E Hbopfx Aa Dswb

Condition: like new (used), Year of construction: 2008, operating hours: 8,348 h, functionality: fully functional, machine/vehicle number: 2887, pressure: 8.5 bar, power: 2.276 kW (3.09 HP), operating pressure: 8 bar, temperature: 176 °C, total height: 2,950 mm, total length: 5,100 mm, nominal heat output: 2.276 kW (3.09 HP), total width: 2,400 mm, empty load weight: 6,500 kg, Equipment: CE marking, ATTSU RL3000/8 steam generator on sale. The steam generator is in very good conditions and has a low mileage of 8348 operating hours. The generator was used in a factory of pickled vegetables which stopped activity. The boiler has been kept preserved ever since. The boiler includes a fuel oil burner (optional), but can be fired with gas. An inspection on the boiler was performed in June 2025 by a boiler specialist which include thickness measurements and pressure test. The test results were favourable. Boiler Datasheet Manufacturer: ATTSU Model: RL 3000/8 (tube fired) Burner: Fuel oil Nwedpowxd Atofx Aa Dsb Serial Number: 2887 Steam Production: 3000 kg/h of saturated steam Rated Pressure: 8.3 bar Test Pressure: 12.5 bar Volume: 3125 liters Year of Manufacture: 2008

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Short taper mount: Ø 105 mm Nedpfx Asdrwl Iea Dswb -Passage: Ø 76 mm -Weight: 26 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck Nodpfsdz U Susx Aa Dowb -Chuck size: Ø 250 mm -Transmission: n/a -Weight: 25 kg

Condition: new, 2000 kg capacity welding rotary table, height-adjustable very robust speed infinitely adjustable from 0.05-0.7 U/min Rotary table diameter 1200 mm Tilt up 120 Total height 600 mm Height of 1450 mm up to 2050 mm Nwedsdvn E Eepfx Aa Djb height mm min. horizontal 1350, tilted to Center 1200 mm height mm maximum horizontally 1850, tilted up to mid 1700 mm Hand and foot remote control

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Nwjdpfxsduacys Aa Dob -Mouth size: Ø 250 mm -Recess: Ø 200 mm -Bolt circle: 3 x 226 mm -Passage: Ø 76 mm -Weight: 25 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 82 mm Noded Ira Nopfx Aa Dowb -Short taper: 8 -Weight: 24.2 kg

Condition: good (used), Open-end wrenches, ring wrenches as remaining stock -various sizes Nodsb A Nxqjpfx Aa Djwb -Weight of tool: approx. 100 kg -Manufacturers: Gedore, Promat, Rahsol -Transport box: 800/450/H320 mm -Weight including packaging: 130 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck Nwodpfx Aod Ira Uea Dob - Chuck size: Ø 250 mm - Passage: Ø 80 mm -Short taper: 6 -Remark: without further jaws -Weight: 26.1 kg

Condition: used, Flange mounting, driving flange -Chuck flange with: driving pin Nwjdpfxsd Hcq Re Aa Dsb -Outer diameter: 250 mm -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 17 kg

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 11812990, pressure: 0.5 bar, operating temperature: 110 °C, tank capacity: 10,000 l, We have a Closed Expansion Tank with a deaerator for sale. ZWZ data: Max. allowable pressure (PS): 0.5 bar Test pressure (PT): 2 bar Max. allowable temperature (TS): 110 °C Nwsdpfx Aowpufysa Deb Total volume: 10000 liters Deaerator data: Type: DM 20 Max. allowable pressure (PS): 0.5 bar Test pressure (PT): 2 bar Max. allowable temperature (TS): 110 °C Total volume: 817 liters Manufacturer number: 1181290 Month/year of production: 12/2015

Condition: good (used), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Mouth size: Ø 250 mm Nwedpfed Itcnjx Aa Deb -Cone: Ø 94 mm -Thread: M20 -Gradient: 2.5 mm -Weight: 33.3 kg