Used Rubber Cable for sale (7,282)

Condition: new, Year of construction: 2026, Mobile 100L pressure blast pot for construction sites or stationary use. Fjdpfjynr Emsx Aikjgg Fittings securely mounted beneath the handle. Ideally suited for demanding construction site applications. Comprises: - 100L pressure vessel - Pre-sieve - Weather protection cover - Water separator - Pressure regulator - Adjustable delivery air (air volume for vessel and blasting hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx.: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man switch with control cable - Pneumatic quick venting control Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with container and lid as attachment for extended blasting without refilling - and more. Manufactured in Germany

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials. Throughput is highly dependent on the screen and the input material: - up to 60 kg/h for EPS with a 15 mm screen *the coarser the screen, the higher the throughput. Motor 9.2 / 11 kW - 400 Volts, sturdy steel construction, hardened cutting blades, screen with interchangeable inserts, optional hole sizes: (8), (10), 15, 22, 26, 30, 40, or 60 mm with electric drive, star-delta starter, overload protection, and 8 m power cable, ready for connection, discharge nozzle 150 mm, optional for plastic or corrugated pipes, blowing distance approx. 12 m, Fgsdpfx Ajh S H T Ujikog chassis with 2 running wheels Ø 380 mm, and one swiveling support wheel Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) weight approx. 240 kg, Spare parts prices and options: 24 hardened blades, €9.90 each (net) 6 bolts, €14.90 each (net) 1 screen, €475 (net) 1 cover, €290 (net)

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric pump, full steel floor, parabolic suspension +100 km/h Equipment: - Electric pump - 6 tie-down points - 5-stage cylinder Net price: €7,521.01 / Gross price: €8,950.00 Fodpozu N D Eofx Aikegg Article number: CHM235332011.04 Technical data: • Brand: Hapert Trailers • Model: Cobalt HM-2 Ferro • Vehicle type: Three-way tipper • Vehicle condition: New • Initial registration: without initial registration • TÜV/HU (technical inspection): 2 years from initial registration • Internal dimensions (L x W x H): 335 x 200 x 30 cm • External dimensions (L x W x H): 468 x 206 x 99 cm • Loading height of the floor: 69 cm • Permissible total weight: 3,500 kg • Tare weight: 1,060 kg • Payload: 2,440 kg • Chassis: Highloader (wheels under the body) • Tires: 195/50R13C • Suspension: KNOTT parabolic suspension • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Yes DESCRIPTION • New side panel hinges incl. welded-on hooks for securing, among other things, a cargo net. • Aluminum side panels with robustly installed locking mechanisms • Aluminum side panels anodized, double-walled • All side panels can be folded and removed • Steel corner posts removable • Option to insert at all 4 corners for tarpaulin frames, grid attachments, side panel extensions, or front wall extensions • Cargo net hooks on hinge lower parts • Stable eccentric locking mechanisms • Full steel floor, 3mm hot-dip galvanized - extremely robust • Reinforced, securely bolted V-drawbar • Very stable steel frame welded • Frame completely hot-dip galvanized • Numerous cross members, resulting in high point load capacity • Additional longitudinal supports continuously welded • All cross and longitudinal supports lie on the ground • 6 tie-down brackets recessed inside the side edge (1000 DaN/kg) TÜV certified! • U-profile on the rear, for easier attachment of the ramps • Ramp storage compartment prepared • Solid 5-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/90AH) in the box incl. cover • Detachable remote control for electric hydraulics with spiral cable and battery status display • External battery charging socket for optional 230V charger • Maintenance-free rubber spring axles from AL-KO/BPW • Reversing automatic • AL-KO/BPW overrun device and parking brake • 13-pole plug • Reversing light • Large dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to ask about any special requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transit license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,740 kg, maximum load weight: 14,260 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 9,430 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Custom Transport Solution Configure your Fliegl trailer to your individual requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Attention: Archive pictures are used! Chassis Heavy-duty welded steel low-loader turntable trailer chassis Heavy-duty turntable with ball-bearing race Integrated storage box in turntable front section Folding rear support Wheel chocks with holders Aluminium side underrun protection Full-width rear mud flap Semi-circular mudguards on 1st axle with anti-spray mud flaps Anti-spray mud flaps behind 2nd axle Spare wheel carrier incl. spare wheel (steel rim) Lockable plastic toolbox with shelf (padlock not included) Lashing Equipment 3 pairs of integrated 10 t lashing points at the front 5 pairs of recessed 10 t lashing mushrooms on top and sides of the outer frame Additional 5 t recessed lashing rings instead of stake pockets Maximum spacing between lashing points: 1,200 mm Drawbar Height-adjustable drawbar with certified 40 mm towing eye, angled by 8° Axles & Suspension SAF drum brake axles Laser-aligned axle and suspension geometry for reduced tyre wear and fuel consumption Maintenance-free parabolic spring suspension with steel-rubber bushings Wheels & Tyres 235/75 R17.5 tyres Twin steel wheels, factory silver finish Braking System Dual-line air brake system Spring parking brake Two anti-mix coupling heads with air lines to towing vehicle ABS & ALB with front ABS connector and connection cable Compatible only with towing vehicles supporting ABS functionality Electrical System 24 V lighting system Multi-chamber rear lights Yellow LED side marker lights 2 white front position lights 2 red/white rear outline marker lights 2 × 7-pin front connectors with connection cables Loading Platform Steel deck in front section 70 mm softwood flooring Steel chequer plate over wheel arches Rear beavertail with 70 mm timber flooring Total low-bed loading area incl. beavertail: approx. 7,200 mm Loading Ramps Fsdpfxozl R S So Aikegg 2 steel loading ramps Length: 2,800 mm Width: 750 mm Side-adjustable Timber-covered Spring-assisted lifting Foldable lower ramp locks to prevent lateral movement Operating Notes A special permit is required for 10,000 kg axle load (approval must be obtained individually in each German federal state). The stated gross vehicle weight is technically possible; depending on the cargo, the maximum permissible weight may not be achievable while complying with legal axle, kingpin and support loads. Registration Registration: Germany EC type approval (2007/46/EC) 24/7 service hotline Prepared for two-line licence plate holder ECE R48 reflective contour marking (white sides, red rear) ECE 70 rear warning plate

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 305 h, load capacity: 135 kg, lifting height: 2,997 mm, fuel type: electric, mast type: telescopic, construction height: 1,385 mm, empty load weight: 640 kg, total length: 1,525 mm, drive type: Elektro, construction width: 750 mm, Medium-lift order picker Mast type: Telescopic Condition: Ready for use and fully operational Technical condition: Good Fgsdpfxezrccpo Aikog Front tire type: Solid rubber Rear tire type: Solid rubber Battery voltage: 24V Battery capacity: 210Ah Battery manufacturer: Lithium-ion Battery year: 2023 Bypass for lift/lowering cut-off: No bypass for lift/lowering Drive/lift signal: All warning signals Bumper: Bumper with rubber protection Storage compartment on right side Load platform: manually adjustable, 540 x 685 mm Flashing beacon: front & rear Operator compartment Operator login code: Access 123 German labeling Operating manual: German Paintwork: Orange Battery: 205 Ah maintenance-free Charger: 30 Amp 85-265 VAC with cable, IEC socket, with CEE 7/7 plug

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,228 kg, maximum load weight: 29,772 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,350 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, Custom Transport Solution Configure your Fliegl trailer to your exact requirements. The vehicle shown is for illustration only. Production and equipment are tailored to customer specifications. Chassis Lightweight high-tensile steel welded chassis with replaceable 2" kingpin. Patented curved front design. 24 t two-speed landing gear with single-side operation. Rear swing clearance approx. 2,100 mm (rear position) / 2,600 mm (front position). 2 wheel chocks with holders. Aluminium side underrun protection. Pneumatically folding rear underrun guard. Half-shell mudguards with anti-spray flap on the last axle. Rear towing hook. Fgsdpfx Aiozl Ez Uskjg Axles & Suspension SAF 430 mm disc brake axles in off-road specification. Laser-aligned axle/suspension system for reduced tyre wear and fuel consumption. Air suspension with air pressure gauge. Automatic first lift axle with forced lowering and traction aid, also electrically operated from the tractor. Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty. Braking System Dual-line air brake system with colour-coded air lines. Spring parking brake. 24 V EBS with front socket. Raise/lower valve. Electronic Stability Program (ESP). Automatic tipping lowering system with shut-off valve. TPMS (ECE R141) via EBS with display in the tractor. Axle load indication via EBS CAN bus. Tyres 385/65 R22.5. Electrical System 24 V LED lighting. LED front position lights. LED rear marker lights. LED side marker lights. 2 × 7-pin and 1 × 15-pin front sockets. Two recessed LED rear work lights. Hydraulics Low-pressure tipping cylinder (max. 170 bar), hard chrome-plated first stage. Hydraulic operation via PTO. Hydraulic connection with 48 mm HDK screw coupling. Body Round steel body in Stone Master Design, manufactured from wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic cylinder mount. Internal front access ladder. Aerodynamic Greenline tapered body design. External shovel and broom holder. Hydraulic rear tailgate with approx. 2,200 mm opening height. Tailgate protection cover and rubber seal. Heat-resistant up to 170°C. Side walls 4 mm, floor 4/5 mm, weight-optimised wear-resistant construction. Cover System Fliegl S.T.E.P. swivelling front platform with folding access ladder (left side), in combination with Flip Top sliding cover. Electrically operated Flip Top cover with automatic rear locking bow, operated from the trailer or via radio remote control. 7-pin spiral cable to tractor included (tractor socket required).

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,900 kg, maximum load weight: 8,900 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, total length: 8,000 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis: Center-axle trailer Fine-grained steel welded construction Outer frame slightly angled, new design with "Load-Lock profile" for tie-down straps 3 pairs of lashing eyes outside in the floor, each 5 tons 1 at the front in the corners, 1 in front of and 1 in the rear incline at the back 6 pairs of lashing eyes outside in the floor/outer frame, each 5 tons Gearbox support leg at the front Rear support, foldable 2 wheel chocks with holder Aluminum side impact protection Steel underrun protection, galvanized Splash guards at the rear covering the entire width (not in combination with forklift mount) Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Coupling device: Center-axle trailer Drawbar with tested 40 mm drawbar eye Drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles + Suspension GFA or BPW axles, at the manufacturer's choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) Braking System 2-line compressed air brake system Color-coded line routing for easy servicing Hand-spindle parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle 24 volt ABS and ALB, with ABS connector at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Wheels and Tires 235/75 R17.5, manufacturer's choice Steel rims, factory silver Electrical System 24 volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front, in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable Floor Steel/diamond plate floor for high point load capacity Note: Slight floor waviness due to welding distortion is possible! Platform length approx. 6,200 mm Rear incline to approx. 900 mm Front wall / corner posts at the front 25 mm aluminum hollow profile, 400 mm high Side walls 25 mm aluminum hollow profile, 400 mm high, foldable and removable Rear wall / corner posts at the rear 1 pair of steel uprights attached to the frame, with brackets for locking the access ramps, access width approx. 2,430 mm Access Ramps Steel ramps 2,300 mm long, 510 mm wide, laterally movable With handrail on the ramps Covered with wood (tip area with steel/diamond plate) With gas spring for one-person operation Operating Instructions The stated total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and following behavior possible due to incorrect load distribution) Country of Registration / Signs Germany With DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 service hotline Fedszcqpajpfx Aiksgg Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau "10-year warranty against rusting" Front wall Aluminum Side wall Aluminum, anodized Access ramps Hot-dip galvanized Customized Transport Solution

Condition: good (used), Year of construction: 2017, operating hours: 494 h, functionality: fully functional, machine/vehicle number: 27026757, type of input current: three-phase, total height: 510 mm, total width: 300 mm, total length: 706 mm, input voltage: 400 V, ground cable length: 5,000 mm, overall weight: 100 kg, type of cooling: water, hose package length: 1,200 mm, electrical fuse: 35 A, open-circuit voltage: 73 V, welding current at 60% duty cycle: 360 A, welding current at 100% duty cycle: 320 A, input current: 26 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 400 A, input frequency: 60 Hz, Equipment: type plate available, Fronius TPS 400i Pulse MIG/MAG welding system – complete with accessories For sale: Fronius TPS 400i Pulse professional MIG/MAG welding system, complete with wire feeder, mobile stand, and a comprehensive set of accessories. Fgjdpfx Ajzwhprsikjg The Fronius TPS 400i Pulse is a professional welding machine suitable for a wide range of MIG/MAG applications. The machine features pulse welding and the ability to record welding data (datalogging). This datalogging is a built-in function of the welding machine and is not a separate accessory. Included with the machine: - Fronius TPS 400i Pulse - Fronius wire feeder, without stand - Sturdy mobile stand for the power source - 1.2-meter intermediate cable pack, currently connected - 20-meter intermediate cable pack, supplied as extra - 8-meter Push/Pull welding torch - Wera torque screwdriver, for correctly tightening the push/pull wire feed rollers - Box with various wear parts, including contact tips, gas nozzles, and other accessories - Ground cable with welding clamp - Connecting cables and other cables/hoses - Other accessories as shown in the photos - Manual available digitally Versatile professional system The combination of the 1.2-meter intermediate cable pack, the supplied 20-meter intermediate cable pack, and the 8-meter Push/Pull torch makes this system highly versatile for welding aluminum, among other applications, and for larger structures or workpieces where the welding machine cannot be placed directly next to the workpiece, the set offers a great deal of flexibility. The built-in welding data recording/datalogging is of interest to professional users who value process monitoring, quality control, and traceability of welding work. The machine has been used and has normal signs of wear, but is in good and solid condition. Sold as a complete set as shown. Inspection and testing are possible by arrangement. Pick-up only, shipping not possible. A forklift is available.

Year of construction: 2026, condition: new, functionality: fully functional, total width: 3,310 mm, total height: 2,830 mm, lifting height: 1,800 mm, mast type: triplex, drive type: elektrohydrauliczny, permissible axle load: 4,500 kg, arm reach: 1,400 mm, arm spacing: 2,820 mm, platform width: 2,820 mm, section length (min.): 110 mm, machine/vehicle number: TW240E, control type: manual, Equipment: 3rd hydraulic function, CE marking, documentation/manual, double-sided, type plate available, The Digima TW240E car lift is a professional, automatic two-post lifting system designed for everyday use in automotive workshops, mechanical service centres and vehicle maintenance facilities. With a lifting capacity of 4,500 kg, it is suitable for safely lifting passenger cars, SUVs and selected light commercial vehicles. The maximum lifting height of 1,800 mm provides convenient access to the underbody and allows mechanics to perform repairs, inspections and maintenance work comfortably. The TW240E features a robust base-frame construction with a floor-mounted connection between the columns. This solution makes the lift suitable for workshops with limited ceiling height. The overall height of the unit is 2,830 mm, the total width is 3,310 mm, and the clear distance between the columns is 2,820 mm. A minimum lifting height of 110 mm also makes it easier to service vehicles with low ground clearance. The lift is equipped with an electrohydraulic drive system powered by a 2.2 kW motor and a 380–400 V power supply. The automatic electromagnetic Solenoid Lock safety system allows the locking mechanisms to be released conveniently from the control panel. A 24 V low-voltage control system, emergency stop button and aircraft-grade cable synchronisation ensure stable, even and safe lifting of the vehicle. Universal two-stage and three-stage lifting arms make it possible to adjust the support points to vehicles with different wheelbases and body lengths. Adjustable rubber lifting pads with a height of 80 mm protect the vehicle sills and make correct positioning easier. Self-lubricating UHMW sliders and reinforced C-shaped arm holders increase the durability of the structure, ensure smooth operation and allow the lift to withstand intensive daily use. The Digima TW240E is a solid, functional and easy-to-operate lift for workshops that require a universal solution for servicing different types of vehicles. Its high lifting capacity, automatic safety systems, strong construction and CE certification make it a safe and durable addition to a professional workshop. Fodpfxjzlgc He Aikjgg

Condition: new, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt from the equipment list. A complete equipment list is available upon request. SWAN NECK Swan neck in SNT design to optimize the loading area length, length approx. 3,700 mm, with a bevel at the rear of approx. 1,000 mm x 10°. For semi-trailer: 4 x 2, 6 x 2, and 6 x 4. - Steel front wall, plug-in, approx. 400 mm high - 3 kW electro-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches. - 1 pair of plug-in aluminum side walls on the swan neck, approx. 400 mm high, in anodized finish. Fgjdpstx Nwnjfx Aikeg - 1 plug-in aluminum rear wall on the swan neck, approx. 400 mm high, in anodized finish. - 2-inch kingpin - Mounting area in the rear section of the swan neck for aluminum approach ramps. - Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) LOADING AREA Extendable loading area, length approx. 8,800 mm, with a bevel at the rear, approx. 500 mm x 10°. A recess in the loading area extends into the bevel to accommodate the excavator arm, approx. 3,850 x 750 x 210/290 mm (L x W x H). Pneumatic locking system with tapered locking pin and reinforced locking positions. The supply lines are protected in the extendable beams and automatically adjust to the respective loading area length. - TPMS tire pressure monitoring system according to ECE R 141. - BPW axles and suspension, 1st axle with steered trailing arm, all other axles with hydro-mechanical forced steering. - 1st axle with electro-magnetic reverse lock via reverse gear and can be manually activated. - Technical axle load: 12,000 kg each - Air suspension with lifting and lowering valve. - Tires 245/70 R 17.5 3PMSF, twin tires. Manufacturer of our choice. - Locking of the loading area with tapered welded-on locking profiles every approx. 250 mm. - 1 intermediate table, approx. 300 mm wide, for the extension tube with a large cross-section. - Extendable widening elements (galvanized) by approx. 230 mm per side (without wooden planks). - Wheel arches with square climbing strips, approx. 15 x 15 mm in front of the axles, continuously open up to the transverse support of the swan neck, approx. 700 x 410 mm (W x D). - Wheel arches with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D). - Control valves for the hydraulic ramps on the right side of the vehicle. - Steering from the front and rear can be operated via a cable remote control, with single-axle control, without installation in the semi-trailer. HYDRAULIC LOADING RAMPS DR-15/60-900-4350-KG-HV-M A pair of two-part steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm. The surface of the large ramp section is divided into two: sheet metal surface with square climbing strips approx. 15 x 30 mm every approx. 200 mm on the outside and rubber surface on the inside. Hydraulically folding ramp tips, ramps can be individually moved outwards by approx. 235 mm and inwards by approx. 215 mm hydraulically. Maximum load and approach angle according to the technical data sheet: C465501 - Rubber floor Super Grip approx. 25 mm and sheet metal floor approx. 5 mm as additional reinforcement on the bevel of the loading area. BRAKING SYSTEM Braking system from WABCO EBS-E according to EU regulations. Without connection cable to the semi-trailer tractor. LIGHTING

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902037031, empty load weight: 4,795 kg, maximum load weight: 30,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2025, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,040 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, color: grey, These images are archive images! The vehicle may still be in use! Fine-grain steel welded construction, in basic lightweight design, kingpin plate with replaceable 2" kingpin, Curved front end "Patented" 24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Support wedges with holder Underrun protection, foldable Half-shell fenders Integrated "fender holder," surface resistant to stone chipping with anti-splash flaps only on the last axle Tarpaulin rod with holder Towing hook at the rear (not on Revolution model) Axles + Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assistance, activated by "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism" Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Automatic tilting lowering with shut-off valve "TPMS" tire pressure monitoring system - display on the tractor unit, via EBS, without truck installation (the truck must have the necessary prerequisites. Only on base tires). Wheels and tires 385/65 R22.5" Steel rims Electrical system 24 volts, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED (Note! with certain tractor units, false diagnoses may occur, although the function is given) Yellow LED lighting on the sides linked to the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, without connecting cable Additional LED work light, integrated and recessed at the rear, switched via reversing light Hydraulics Fgsdpfxsy Rrple Aikjg Low-pressure cylinder max. 170 bar Operation hydraulically via truck auxiliary drive Bins Aluminum box body made of high-quality, abrasion-resistant material. Sloping front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, cleanly welded, with top rail profile that prevents spillage. Inside with access ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder outside on the front wall. Greenline - conical and aerodynamic bin shape "Membrane" - rear wall Rear wall as a hinged flap with "double-hinge hinge," externally mounted with double hook lock. Rear wall with rubber seal Floor continuous, 6 mm thick Standing platform with access ladder, connecting plate for air/electrical and brake connections with large clearance for optimal operability. Roll tarp, can be folded to the right side, with central locking on the left side Operating instructions For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod, so that it is not attacked and rusted by the material.

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis, bent * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle arrangement. Wheel protection above the axles with spray mist suppression * All steel parts sandblasted * Lateral impact protection made of anodized aluminum mounted * Increased point load of approx. 30,000 kg over approx. 4,000 mm * Special design in the bent area for maximum low-bed length in combination with AluLeg outrigger supports instead of telescopic outrigger winches, max. rear swivel radius of the tractor unit approx. 2,100 mm Special superstructure with rear beam extension * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps * Rear beams extendable to approx. 4,200 mm * Three sliding beams per side with rubber cord relief * Additional center beam locking in the roof beam and parking position, by means of a pull cable and spring latch * Lifting roof mechanically adjustable, lifting height approx. 400 mm, can be operated on both sides or on one side, without opening the opposite side and the doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the beams * Front overhang on the front wall for operation under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, bottom 450 mm pockets, above 4 rows of single pockets * Only 3 rows of insert slats in the upper bed. Spacing between slats evenly distributed Floor * Approx. 27 mm special water-resistant glued beech plywood, rough surface * Steel sheet in the wheel arch area * Forklift truck accessible according to DIN standard * Outer frame flush with the surface Brakes * WABCO compressed air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design * Air suspension with lifting and lowering device, total stroke approx. 230 mm * Third and fourth axles as friction-jointed trailing axles with electric and mechanical lock Twin tires * 235/75 R 17.5, -16-ply, incl. E-wheel holder. without E-wheel Paint finish * Chassis in RAL 3002 red, solid color * Center beams, axles coated with KTL black * Corner beams in hot-dip galvanized design * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Superstructure in RAL color, solid color Special equipment incl. * Air suspension in ECAS design, operated on the semi-trailer * Overwidth signs front and rear in zinc-plated, steplessly telescopic design with attached warning lights including socket for rotating beacons (small panels) * Sliding tarpaulin cover locking additionally from the outside * 4 beam adapters for special outer frame profile, to lock the center beams as desired * PVC sliding tarpaulin, color similar: RAL 9006 silver * Roof tarpaulin translucent, in overwidth and overheight design, flat hooks, tarpaulin folds, closures with pawl lock /OCS * Telescopic socket for rotating beacon including beacon on the rear left Fsdpolthguefx Aikegg * Outer frame for machine transport with app

Condition: excellent (used), functionality: fully functional, power: 110.32 kW (149.99 HP), fuel type: diesel, Year of construction: 2021, operating hours: 172 h, Equipment: air conditioning, all wheel drive, car registration, hydraulics, trailer coupling, BOKI MUNICIPAL VEHICLE 1352T Length x Width x Height – 5070 x 1700 x 2190 mm (excluding mirrors) Wheelbase 2400 mm / 990 mm Tank capacity: Diesel 50 liters, AdBlue 25 liters, Hydraulic oil 50 liters Additional equipment affects unladen weight, payload and dimensions Engine FPT F1C 1152, EU 6C, 110kW (standard) FPT, Type F1C, 2998 cm³, 4-cylinder diesel 110 kW / 150 hp at 3500 rpm. Torque: 320 Nm at 1200 rpm. Emission standard Euro 6C (Stage V in vehicle documents) Permissible total weight 7490 kg Drive system (standard) Hydrostatic drive, ECO-Drive speed optimization Permanent all-wheel drive with self-locking differential High-pressure hydrostatic system (400 bar), max. output torque 500 Nm Steering (standard) Mechanically steered front axle with up to 40° steering angle Left-hand drive Power steering with hydraulic assistance 3rd axle forced steering and liftable Suspension (standard) Parabolic leaf springs with stabilizer Brakes (standard) ABS 6-wheel disc brakes with brake booster and spring-loaded parking brake Incl. 4-channel ABS braking system with anti-slip control Parking brake with optical and acoustic warning Tires 285/65 R16 (standard) Boki equipped with 285/65 R16C tires Fgjdpszf Etwsfx Aiksg Frame (standard) With ball coupling system Ø 42 mm, for mounting tipper bodies and other superstructures Paintwork (standard) Cab + engine box: deep orange RAL 2011 Chassis: anthracite gray RAL 7016 Underbody protection Dinitrol (standard) Corrosion protection chassis Dinitrol 4010 Temperature resistant up to 210° resistant to alkaline and acidic influences can be washed off with special cleaner Hydraulic oil HVLPD 46 (standard) Filled with HVLPD 46 Service interval approx. 2000 hours Including the following winter equipment: Kugelmann spreader Duplex 2.5 m³ stainless steel Type SD B180 H80 L270 KH KA VA Stainless steel design (container and sheet metal parts made of stainless steel, glass bead blasted and painted with special paint) color RAL 2011 Dimensions: Hopper width (B): 1800mm Hopper height (H): 800mm Hopper length (L): 2700m Rear overhang (X): 50mm Discharge type: short Control k-tronic 2 Fixed cable harness Terminal box for cable separation Mounting kit Universal, spider for spreading width B105 - B120 Subframe for mounting on the tipper spider, mounted on the spreader Special paint of the spreader RAL 5002 Ultramarine Blue Access ladder A Duplex stainless steel Foldable with quick-release fastener Platform slip-resistant with handrail, suitable for Duplex spreader Electric spreading pattern adjustment (ESB) from the driver's cab Electric spreading pattern adjustment Standard (ESB) complete Electric servo - adjustment motor to move the spreading pattern position Display and adjustment of the spreading pattern position by means of control panel Hummel Vario - snow plow LF - D 2700mm With support foot, 2 double-acting hydraulic cylinders, 6 hydraulic hoses with couplings and horizontal adjustment Complete with hydraulic lifting and lowering device including Hydraulic cylinder, hoses, couplings and device-side mounting plate (DIN plate) Can be used in a variety of ways as: - side plow (diagonal plow) - wedge-shaped plow - V-shaped plow Paintwork: RAL 5002 Blue Height: approx. 900mm Weight: approx. 500Kg Total width: approx. 2700mm Snow plow - additional lighting consisting of 2 elastically mounted marker lights, holder, cable, plug Rubber - corundum strip 2700mm Changes, typing errors, errors and prior sale are subject to chan

Condition: excellent (used), mileage: 3,31,009 km, power: 294 kW (399.73 HP), first registration: 05/2010, fuel type: diesel, axle configuration: 10x4, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 9,450 mm, total width: 2,550 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, Year of construction: 2010, = Additional options and accessories = - PTO = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,777 cc Transmission Transmission: ALLISON, automatic Axle configuration Front axle 1: Max axle load: 10,000 kg; Steered Front axle 2: Max axle load: 10,000 kg; Steered Front axle 3: Lift axle; Max axle load: 10,000 kg; Steered Rear axle 1: Twin tires; Max axle load: 9,500 kg Rear axle 2: Twin tires; Max axle load: 9,500 kg Weights Unladen weight: 17,870 kg Payload: 35,130 kg Gross vehicle weight: 53,000 kg Condition Technical condition: very good Optical condition: very good Identification Registration number: BX-NZ-59 TERBERG FM2850 10X4 WITH 40 TON CHAIN SYSTEM EURO 5 L PACKAGE 400 HP DRIVE: 10X4 3x STEERED AXLES 1x LIFT AXLE WHEELBASE: 560 cm DAY CAB WITH AIR CONDITIONING, CAMERA ALLISON AUTOMATIC TRANSMISSION LED TRANS-COM CHAIN SYSTEM 40 TON HYDRAULIC CONTAINER LOCKING CENTRAL LUBRICATION SYSTEM FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS, COMMERCIAL VEHICLES, AND MACHINERY FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH Fjdpfeuxy U Rsx Aikjgg HABLAMOS ESPANOL

Condition: used, Year of construction: 2017, machine/vehicle number: 1739289, input current: 10 A, protection type (IP code): IP20, welding current (max.): 2,000 A, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Supply voltage: 24 V DC / 90 V DC Input current: 1 A / 10 A Welding current: up to 2,000 A at 2% duty cycle Protection class: IP20 Polarity: STD Design: Closed protective housing made of aluminum profiles Safety enclosure: With protective doors MACHINE DETAILS Control cabinet: Integrated Equipment cabinet: Mobile EQUIPMENT Signal light Welding torch Connection cable Mobile equipment cabinet Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. Fedpjzzk Rmjfx Aiksgg A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: new, functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, empty load weight: 119 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 155 °C, The HDS 8/18-4C is one of the most powerful hot water pressure washers in the mid-range and also impresses with its sophisticated ergonomics and high level of user-friendliness. Its 4-pole, water-cooled electric motor, the robust 3-piston axial pump with ceramic pistons, and the economical eco!efficiency mode ensure maximum performance and reliable, economical operation. Many other features and performance details are also impressive, such as the optimized burner technology, detergent tank, convenient mobility concept, comprehensive safety technology, simple operation with a single switch, and clever accessory storage options. Technical Specifications: Condition: NEW Current type (Ph/V/Hz): 3 / 400 / 50 Flow rate (l/h): 300 - 800 Working pressure (bar): 30 - 180 Maximum pressure (bar): 220 Temperature (at inlet 12 °C): min. 80 - max. 155 Connected load (kW): 6 Heating oil or gas consumption at full load (kg/h): 5.2 Heating oil consumption eco!efficiency (kg/h): 4.2 Connection cable (m): 5 Fuel tank (l): 15 Weight (with accessories) (kg): 119 Dimensions (L × W × H) (mm): 1066 x 650 x 920 Included: Hand spray gun: EASY!Force Advanced with Servo Control Length High-pressure hose: 10 m Spray lance: 1050 mm Power nozzle Equipment: Detergent tank: 10 L ANTI!Twist Externally fillable tanks for detergent, limescale protection, and fuel Fedpfx Aiew Exdlekjgg Control panel with illuminated indicator Pressure cut-off Operational reliability: - Easily accessible water filter protects the pump from particles in the water. - Safety valves, low-water protection, and fuel safety devices ensure the machine's availability. - The soft damping system (SDS) compensates for vibrations and pressure peaks in the high-pressure system. High efficiency: - Eco!efficiency mode – economical and environmentally friendly, even during longer use. - Reduces fuel consumption and CO₂ emissions by 20 percent. Detergent dosing: - Precise detergent dosing with rinse function. - Large tank opening with filler spout. Mobility concept: - Jogging principle with large, rubber-tired wheels and a swivel caster. - Integrated tipping tray for effortless transport over steps. - Push handles for easy transport and maneuverability. Simple controls: - Intuitive operation with a large one-button selector switch.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 53 h, machine/vehicle number: GS30D-41597, load capacity: 227 kg, empty load weight: 1,279 kg, construction height: 2,000 mm, fuel type: electric, total length: 1,880 mm, drive type: Elektro, construction width: 810 mm, working height: 7,640 mm, Scissor lift Chassis number: GS30D-41597 Fgjdpfx Ajzrkgvjikog Condition: Like new Technical condition: very good Front tire type: Non-marking Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire condition: 80 - 100% Battery voltage: 24V Battery capacity: 225Ah Battery manufacturer: Motive Battery type: PzS Battery year of manufacture: 2021 Description: foldable guardrail with a platform swing gate at half the guardrail height, power cable to the platform, platform with a diamond-plate floor, attachment points for safety harnesses, platform load sensing system, proportional drive and lifting control, SmartLink two-zone control, emergency descent to lower the platform, fully extendable to maximum height, side and rear forklift pockets for easier relocation, non-marking solid rubber tires.

Condition: excellent (used), functionality: fully functional, fuel type: diesel, color: yellow, overall weight: 7,720 kg, number of seats: 1, mast type: mono, Year of construction: 2006, operating hours: 11,381 h, Equipment: additional headlights, hammer hydraulics, hydraulics, low noise, rubber tracks, Yanmar mini excavator with rubber tracks Fjdpfezav Trjx Aikogg Good overall condition Dozer blade Machine ready for work More information on the Almerisan website.

Condition: used, Year of construction: 2005, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 10910806050010, tank capacity: 350 l, usable tank capacity: 300 l, total length: 1,560 mm, total width: 1,560 mm, total height: 1,100 mm, inner diameter: 300 mm, outer diameter: 450 mm, overall weight: 410 kg, wall material: stainless steel, wall thickness: 12 mm, wall structure: double-walled, manhole location: top, reception height: 600 mm, discharge height: 600 mm, operating temperature: 120 °C, operating pressure: 1 bar, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, The Metos Viking Combi 300E is a high-performance, Finnish-made heavy-duty industrial mixing and cooking kettle. The primary physical, structural, and technical documentation outlines the exact specifications for this 300-liter model: 📐 Dimensions & Clearance: Width: 1,560 mm Depth: 1,100 mm (varies up to 1,165 mm depending on the specific safety lid protrusion). Height: 900 mm to the kettle lip / 1,535 mm total height including the elevated control pillar. Tilting Discharge Height: 600 mm clearance from the floor when tilted. ⚖️ Weight: Net Weight (Empty): 410 kg (Standard 4G model) / Up to 414 kg depending on the configuration of structural sub-surface installation frames. Shipping Weight: Approx. 545 kg packed. Fgjdpfx Ajzzxyieikjg ⚡ Electrical & Heating Power Voltage Requirement: 400/230 V, 3NPE, 50/60 Hz Total Power Consumption: 43.6 kW Amperage/Fuse Size: 80 A Heating System: Steam-jacketed indirect electrical system (maximum working pressure of 1.0 bar, yielding up to +120°C inside the jacket). 🚰 Utility Connections: Cold Water (CW): R½" (Ø15 mm) connection. Hot Water (HW): R½" (Ø15 mm) connection. Connection Heights: Water inlets enter at roughly 270 mm from the floor; the main power cable input gland enters at 510 mm. ⚙️ Operational Features: Integrated Mixer: Stepless variable mixing speeds from 20 to 110 RPM with an auto-reverse program and structural scrapers. Tilting: Smooth, heavy-duty electrical motor-driven tilting mechanism.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 1,850 kg, maximum load weight: 8,650 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 3,100 mm, loading space width: 1,740 mm, total length: 4,900 mm, total width: 2,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Tandem Low-Bed Trailer for Skip Containers * High-tensile steel welded chassis construction * 1 pair of adjustable and removable skip container locking wedges * 1 pair positioned in front of the container * Lashing rails for skip containers on both sides of the body * Front jockey wheel * Steel mudguards covering both wheels * Aluminium side underrun protection * 2 wheel chocks with holders Fedjzhfzgjpfx Aiksgg * Recessed rear storage compartment integrated into the floor, approx. 650 × 240 × 240 mm (W × L × D), with slightly raised lid ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * 2 Euro axles (manufacturer's choice) with tapered roller bearings and S-cam drum brakes * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Parabolic leaf suspension with maintenance-free steel-rubber bushings and mechanical load equalisation (walking beam system) ### Wheels & Tyres * 235/75 R 17.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * 24 V ABS and automatic load-dependent braking (ALB), with front ABS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 × 7-pin non-interchangeable front connectors with connecting cable ### Low-Bed Body (TTS) * Low-profile steel well body * Steel floor plate * Steel side walls fully welded to the floor for maximum durability Note: Minor floor distortion caused by the welding process is technically normal. ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis painted in customer's colour * Drawbar painted to match the chassis --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201011556, empty load weight: 3,300 kg, maximum load weight: 8,200 kg, overall weight: 11,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,580 mm, suspension: steel, tire size: 235/75 R17,5", color: red, Demonstration vehicle The images are archive images; the vehicle may still be in use! Steel welded construction, continuous tilting shaft at the rear with 80 mm ball bearing, gearbox support at the front, foldable rear support, 2 chock blocks with holder, steel underrun protection, splash guards at the rear across the entire width, quarter panel fenders, spare wheel, same brand as the standard tires, steel rim, loose, 1 plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note: The side panel touches the storage box when folded down. Lockable storage space for loading ramps under the loading area, 1 pair of aluminum ramps, 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg (mounting rail for ramps at the rear) Drawbar with tested 40 mm tow hitch, drawbar height adjustable via spindle, max. adjustment range 300 mm BPW drum brake axles, axles/chassis laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) 2-line pneumatic braking system, color-coded line routing for easy maintenance. Hand spindle parking brake, integral air reservoir, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS, 2 fail-safe coupling heads at the front, with connection lines to the truck 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front 2 white/red outline lights at the rear, 2 x 7-pole fail-safe connectors at the front, with connection cable Three-way tipper, hydraulic multi-piston press with stroke limitation and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck, hydraulic connection with SVK connector NW 10/3, including connection hose Operation hydraulically via truck auxiliary drive Stable tipping bridge with 4 mm steel plate floor, side panel structure made of steel, side walls continuous, foldable and pivotally mounted with central locking at the bottom. Rear corner posts can be plugged in. Rear wall foldable and pivotally mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom, platform width 2420 mm 5 pairs of lashing eyes in the floor, each 5 tons Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for single-row license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Fedpjlhpzvsfx Aikjgg The images are archive images; the vehicle may still be in use!

Condition: used, Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, 75 L Intensive Rubber Mixer with a 220 kW AC Motor, Gearbox, Drive and Control Panel, Pneumatic Hopper Door, and Hydraulic Discharge Door. Ready for operation and in good condition. Fedpfx Aiezufu Hjksgg

Condition: used, mileage: 2,46,800 km, power: 103 kW (140.04 HP), first registration: 07/2018, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 08/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, loading space length: 2,700 mm, loading space width: 2,050 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, INTERNAL VEHICLE NUMBER: M597----VW CRAFTER 2.0 TDI DOUBLE CAB EURO 6----KM: 246,800, WELL-MAINTAINED WITH SERVICE BOOK LAST INSPECTION WITH OIL CHANGE AT 232,454 KM ON 24.03.2025 ALL INSPECTIONS WERE CARRIED OUT IN A MANUFACTURER-AUTHORIZED WORKSHOP VEHICLE HISTORY AVAILABLE IN DIGITAL FORM----LIKE-NEW M+S TIRES----* BRAKE ASSIST (HBA) * HILL START ASSIST * START/STOP AUTOMATIC * AIR CONDITIONING ----TOTAL WEIGHT: 3500 KG UNLADEN WEIGHT: 2148 KG PAYLOAD: 1352 KG----DOKA----7 SEATS----SUSPENSION AND STABILIZERS REINFORCED AT THE FRONT AND REAR----FLATBED DIMENSIONS: LENGTH: APPROX. 2.70 METERS WIDTH: APPROX. 2.05 METERS----BASIC BOX FROM LOGICLINE, MODEL BB-190 ----* BLUETOOTH HANDS-FREE SYSTEM * USB * AUX * 2X 12V SOCKET * ELECTRIC WINDOW LIFTERS * ELECTRIC AND HEATED EXTERIOR MIRRORS * CENTRAL LOCKING WITH REMOTE CONTROL * CABIN LED LIGHTING * STORAGE SPACE/COMPARTMENT IN THE CABIN * LOW EMISSIONS ACCORDING TO EURO 6 EXHAUST STANDARD ----Special equipment: * Airbag driver/passenger side * Passenger airbag can be deactivated * Audio system Composition Audio (radio, SD card interface, MP3 playback function) * Exterior mirrors electrically adjustable and heated * On-board tools and jack * Folding remote key (2) Fsdpfjyumvyox Aikogg * Ladder carrier at the front with protective grille on the front panel * Spare wheel in driving condition * Rear wall with window * Seats in the cabin: double passenger seat with storage/compartment and backrest that can be folded down to create a shelf * Trailer coupling preparation (socket and cable) Additional equipment: * Exterior mirror convex left * Exterior mirror convex right * Turn signals LED integrated in exterior mirrors * Floor covering in the cabin: rubber * Double headlights * Dual-tone horn * Driving assistance system: hill start assist * Driving assistance system: brake assist (HBA) * Electric window lifts front * Windshield laminated glass * Grab handles A-pillars * Interior lights in the cabin: LED * Body/superstructure: flatbed double cab standard * Fuel tank: 75 liters * Radiator grille with chrome trim at the top * Steering column (steering wheel) adjustable * Headlight range control * Truck registration * Marker lights on the side * Engine 2.0 Ltr. 103 kW TDI * Rear fog light * Wheelbase 3640 mm * Low emissions according to Euro 6 exhaust standard * SCR system (AdBlue technology) * Power steering electro-mechanical * Seat cover / upholstery: fabric * Seats in the cabin: driver's seat adjustable * Seats in the cargo/passenger compartment: 1st row * 4-seater bench (double cab) * Steel rims 6.5x16 * Start/Stop system engine * Front bumper in gray with trim in vehicle color * Warning system for seat belt (driver's side) * Heat protection glazing * Central locking with remote control and interior operation * Permissible total weight 3.50 t ---- ++ Exclusive promotion at Autohaus Mat GmbH: Up to €1,000 trade-in bonus? Your advantage for changing vehicles! (only valid for commercial vehicles) ++ Contact us directly via WhatsApp: Why Autohaus Mat GmbH? 1. Attractive trade-in: We handle the process quickly and fairly. With our trade-in bonus, you maximize the value of your vehicle and benefit when buying a new model. 2. Individual financing solutions: Would you like to finance your new vehicle? We offer tailored financing options to suit your needs: * With or without a down payment * Flexible terms * Top conditions 3. Personal customer service: Our experienced team is here to help.

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 41/640, clamping force: 250 kN, Four-point injection molding machine, Rutil MP4 model, with a platen size of 260 x 240 mm and a clamping force of 25 tons. The machine is in working condition. Fedpoyb Rn Tefx Aiksgg

Year of construction: 2026, condition: new, Do you want the BEST price/performance ratio? Contact us! Machines direct from the manufacturer! The ORIGINAL made in AUSTRIA! VACUFORMER - vacuum presses - versatile, functional and economical! VACUFORMER Standard - The must have machine! Fsdpfx Aef H S T Ueikogg Clamshell opening: work piece height approx. 500 mm Pressing surface LxW: 2920x1320mm Overall dimensions LxWxH: 3100x1400x1100mm Standard vacuum pump 40m³/h Equipment: Vacuum table with rubber membrane and membrane fast-change system • Fully welded, sturdy and robust steel construction • pressure up to 9 t/m² (-900 mbar rel.) • analogue vacuum pressure gauge • mechanical vacuum pressure regulator • special, very tough Natural rubber membrane up to 130 °C, 690 % elongation, for wood and veneer pressing • robust, heat resistant phenolic resin ply working surface with integrated air suction channels, thickness 16mm • extra vacuum connector (e.g. for external vacuum bag, vacuum clamping) • incl. swivel castors • with intecrated forklift pockets • complete with cable and plug Electrical connection3~ 400 V, 50/60 Hz, 1.25 kW Other dimensions on request! VACUFORMER L Clamshell opening: work piece height approx. 650 mm Vertical opening: work piece height approx. 1000 mm Pressing surface LxW: 3880x1540mm Overall dimensions LxWxH: 4100x1760x1400mm VACUFORMER XL Clamshell opening: work piece height approx. 650 mm Vertical opening: work piece height approx. 1000 mm Pressing surface LxW: 3880x1780mm Overall dimensions LxWxH: 4100x2000x1400mm VACUFORMER XXL Clamshell opening: work piece height approx. 650 mm Vertical opening: work piece height approx. 1000 mm Pressing surface LxW: 3880x2250mm Overall dimensions LxWxH: 4100x2400x1400mm Vacuum pumps: 40m³/h, 80m³/h, 100m³/h, 140m³/h Standard for VERTICAL models: • Hinged control cabinet on the right side • 4 FESTO pneumatic-cylinders • Trussed pressing frame • Two hand safety operation • Motion signal • Siemens pressing timer with alarm • automatic pressing process UNIVERSALFORMERS Direct - Honest - Experienced