Used Ryan Ga for sale (29,111)

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, For sale due to closure of an artisan bakery: A WP bread roll system built in 1995, preceded by a WP Multimatic, hanging (proofer) + a WP stamping station. Please note that the system must be dismantled by the customer. Iedeuqw Drspfx Aanjtr

Condition: excellent (used), Year of construction: 2017, overall weight: 403 kg, volume flow: 1.55 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 11 FF screw compressor With refrigerated dryer On a 500 l pressure vessel 11 kW motor Capacity 1.55 m³/min Pressure 13 bar Year of manufacture: 2017 Iedpfxsxn Atgj Aanetr Compressor serviced, filters and oil replaced.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 952587, The weight sorter is part of a hemp hulling plant that is being dismantled. Other machines are also for sale. See the PDF document below. Iodpfjxnvp Usx Aanotr

Year of construction: 1988, condition: good (used), A complete Atlas Copco air compressor including Donaldson Ultra Filter and a Tank in good working condition Isdohpx U Ajpfx Aanjtr

Condition: repair required (used), Year of construction: 2005, functionality: not functional, 📌 Atlas Copco GA 132-FF screw compressor (year of manufacture: 2005) 🔧 Condition: Damaged (unknown cause of failure) I offer for sale a screw compressor of the renowned brand Atlas Copco, model GA 132-FF, with a built-in dryer. Year of manufacture 2005. Itodpjv Hfc Sefx Aanjr ⚙️ Specification: ✔ Power: 132 kW ✔ Capacity: about 25 m³/min ✔ Working pressure: up to 14 bar ❌ Technical condition: The compressor is damaged - the exact cause of the failure is unknown. It may require repair or be used for parts.

Condition: like new (used), Tapping dies R 2 for GA 4 Itjdpfxeivzcko Aanjr Tapping dies for Georg Fischer GA 4 tapping machine as new GF Art. 012209

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Iedpfx Aaev Rmmmenotr

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Isdpfxexmkc Te Aanstr

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, We offer Atlas Copco compressors TYPE GA 55 Isdpfxjwa Iz As Aanotr Pressure 10 bar Motor 55 kW Year 2000 Compressor with documentation We also have other compressors from Atlas Copco, Kaeser, and Mahle

Condition: new, Year of construction: 2023, In good technical condition, fully functional and testable. TVARcut LF 3015 GA Year of manufacture: 2023 (demonstration machine) Laser source power: 6 kW Max. material thickness: 27 mm Number of pallets: 2 pcs For sheet format: max. 3000 x 1500 mm Iodpevtyp Tefx Aanotr Machine including voltage stabilizer and laser source cooling Total weight: 6600 kg Including training for your operator.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Atlas Copco GA22 SP screw compressor – 22 kW | 7.5 bar | 60 l/s Isdpfx Aasv Dukgsnstr I will sell an industrial screw compressor of the renowned Atlas Copco brand, model GA22 SP, manufactured in 1996. The device is ideal for applications requiring a reliable source of compressed air in various industrial sectors. Technical data: Model: GA22 SP Motor power: 22 kW Maximum operating pressure: 7.5 bar Flow capacity (FAD): 60 l/s (216 m³/h) Shaft speed: 3000 rpm Power supply voltage: 400 V / 50 Hz Noise level: 74 dB(A) Dimensions (L x W x H): 770 x 850 x 1200 mm Weight: 405 kg Condition and use: The compressor is in good technical condition, regularly serviced and ready to work. It was used in controlled industrial conditions, which ensures its reliability and efficiency.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 15040169 + 0805014349, Pfeiffer Vacuum GmbH Turbomolecular pump with drive electronics, PM P03 020 GA, TPH 2101 P + PM C01 713, TC 750 Turbo pump model: PMP03020GA, TPH2101P Drive electronics model: PMC01713, TC750 Turbomolecular pump: Serial number: 15040169 Inlet connection nominal diameter: DN 250 ISO-K Outlet connection nominal diameter: DN 40 ISO-KF Flood connection: G1/8" Nominal speed: 31,500/min (525Hz) Suction speed N2: 1,900l/s Max. backing pressure N2: 1.5mbar Iedjvrzakopfx Aanotr Max. backing pressure He: 1.0mbar Max. backing pressure H2: 0.5mbar Oil: PM 016 144-T Drive electronics: Serial number: 0805014349 Input: 24/48/72/140V DC +/-5%, 5.4A Output: 0-140V AC, 0-1600Hz, 6.5A Note on condition: 1. Statements on operating hours are approx. 13,000h with approx. 1,600 starts and stops. 2. Process gases: nitrogen and argon 3. Process dusts: chromium nitride and steel 100Cr6 4. The pump was stored in full working order in 2018 and cleaned externally.

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: APÜI298304, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection between 28/07/2025 and 31/07/2025. Itedpfx Aswvh H Doaner TECHNICAL DETAILS Maximum pressure: 8.5 bar Flow rate: 31.4 l/s Motor power: 11 kW Motor speed: 2,940 rpm MACHINE DETAILS Dimensions: 1,250 mm x 680 mm x 1,430 mm Weight: 410 kg

Year of construction: 2008, condition: ready for operation (used), 1) Reciprocating compressor Prematic PAKO 1201/270, year of manufacture: 2008, displacement: 1200L/min, flow rate: 925L/min, tank volume: 270L, speed: 700rpm, power: 7.5kW, operating pressure: 10bar, operating hours: approx. 5257h. 2) Screw compressor Atlas Copco GA7FF, year of manufacture: 1999, operating pressure: 8bar, flow rate: 1092L/min, power: 7.5kW, speed: 3000rpm, weight: approx. 250kg, operating hours: 14057h. Documentation available. An on-site inspection is possible. Itodpfx Aasxf Iinener

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: AII 234242, overall weight: 385 kg, volume flow: 149 m³/h, operating pressure: 7 bar, Previously used for grit blasting, after renovation (oils, filters, control panel), tested and then set aside, the compressor is for sale in the condition shown in the pictures. Iodpfewra Hbex Aanotr The machine is in Szombathely, we can also help with loading (ramp, forklift). It can be sold without VAT within the EU, it is sold with an invoice.

Condition: good (used), Year of construction: 2004, machine/vehicle number: A II 151768, Offer 25979 Itedowrcq Nepfx Aanor - Operating hours 16550 h - Operating pressure 10 bar - Delivery rate 15.9 l/s - Drive 400 V / 7.5 kW - Motor speed 3000 rpm - Air tank 250 L - Required space approx. W 700 x H 1830 x D 1050 mm - Weight approx. 250 kg

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Bandsaw grinding machine Risstaler riv Rivo 200 GA Year of manufacture 1984 Various tooth shapes available Operating instructions included Itedpfjwd N Dajx Aanor Feed rate 30 or 60 teeth per minute

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: AII 471146, GA 75 screw compressor Ijdpfx Aast Du Syjnotr Maximum operating pressure: 10 bar Compressed air production: 192 l/s Power: 75kW Speed: 3000 r/min Weight: 1550kg

Condition: used, Year of construction: 2001, pressure (max.): 10 bar, Screw Compressor Manufacturer: Atlas Copco Type: GA 11 FF Year of Manufacture: 2001 Technical Specifications Isdpswivlujfx Aanetr Manufacturer: Atlas Copco Type: GA 11 FF (with integrated refrigeration dryer) Year of Manufacture: 2001 Floor-Mounted Design Control System: Elektronikon Max. Operating Pressure: 10 bar Motor Speed: 3000 rpm Rated Power: 11.0 kW Dimensions: L 1.2 x W 0.70 x H 1.40 m Weight: 475 kg All information is subject to change. A live demonstration is available at any time in our showroom.

Condition: good (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 91736, input voltage: 380 V, input current: 99 A, number of spindles: 8, The device was used for planing wooden window frames. Device is in good condition. The price of the device is to be offered by the buyer. Buyer is responsible for transportation and dismantling. If you have any further questions, please contact us about the production equipment Itjdpfju E Htgjx Aanjr

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Itedpowlp Hdsfx Aanjr Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: Fahrion, thread cutting attachment GA 30 -Shaft: MK3 -Reversing gear: integrated quick return, slip clutch -Clamping diameter: max 23 mm -Dimensions: 230/125/H80 mm Iedswvfyuopfx Aanetr -Weight: 6.3 kg

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) Iodpfxot Hdh No Aanjtr With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Pressure 13 bar Mileage 13200 hours The compressor is fully functional.

Condition: excellent (used), Year of construction: 2009, overall weight: 444 kg, volume flow: 1.7 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 11 VSD screw compressor Variable speed (inverter) On a 500 l pressure tank Itedpfx Ajv Sm Umeanjr 11 kw engine Efficiency 1.70 m3/min Pressure 10 bar Year of production 2009 Compressor after service, filter and oil replacement.

Condition: excellent (used), Year of construction: 1991, overall weight: 1,000 kg, volume flow: 6.72 m³/h, operating pressure: 75 bar, input voltage: 400 V, ATLAS COPCO GA 45 screw compressor With refrigerant dryer Itedpjukvvaofx Aanor 45 kw engine Capacity 6.72 m3/min Pressure 7.5 bar The compressor is fully functional.