Used Ryan Ga for sale (28,948)

Condition: excellent (used), Year of construction: 2000, Atlas Copco GA Compressor 136 kW Year: 2000 Operating hours: 60,150 Ltodpfxou Thw Ro Aanoa Load hours: 22,097

Condition: used, Year of construction: 2022, working width: 6,400 mm, Type: Center | Kuhn Swather GA 6501 Year of manufacture 2022 5.55 - 6.40 m working width Ltodpfxewr U Duj Aanea 2-rotor swather with chassis Lower link mounting Cat. 2 1 double-acting control unit required Empty weight 1,260 kg | Internal no.: 11323626

Condition: ready for operation (used), Year of construction: 1992, Two peripheral devices for an injection moulding facility are available. 1) Compressor Atlas Copco GA 15, year of manufacture: 1992, air flow rate: 28.2l/s, motor power: 15kW. 2) Dryer Atlas Copco FD 40, operating pressure: 20bar. Documentation available. An on-site inspection is possible. The machines are ready for loading. Sale of individual units is possible. Ltodjw R Uzcopfx Aanja

Condition: good (used), Year of construction: 2010, operating hours: 1,00,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Ljdpou Rptysfx Aansta Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: new, Year of construction: 2025, 2-column metal band saw automatic machine with infinitely variable mitre adjustment from 90°- 45°- 30°. Especially suitable for universal use with different cross-sections, materials, and frequently changing mitre cuts. The pivot point remains unchanged at every angle setting, enabling precise length measurement at 90° and within the mitre range. Technical data: Cutting range: 90° round 335 mm, flat 500x335 mm 45° right 330 mm, flat 320x335 mm 30° right 200 mm, flat 200x335 mm Cut-off length: Single stroke up to 600 mm, multiple stroke up to 6000 mm Cutting speed: AC frequency-controlled drive 15-150 m/min, steplessly adjustable at the control panel with the following additional equipment: Free-standing control panel the following options are recommended: Micro spraying device Ltedpeh S Nxzsfx Aanea Laser light Clamping pressure regulator 7" CE panel Mounting elements

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 15698, Hegla air cushion breakout table, fully functional, ready for immediate use, technical data attached Lodpfxjrdfk No Aanjta

Condition: used, Year of construction: 2023, operating hours: 2,554 h, Operating hours: 2554 Technical Data Working width (m): 9.50 - 14.70 Average swath width (m): 1.40 - 2.50 Transport width (m): 3.00 Transport length (m): 10.90 Transport height (m): 4.00 Swath type: 1 central swath Number of rotors / rotor diameter (m): 4 / 3.65 Number of tine arms per rotor / Number of double tines per tine arm: 13 on the front rotor, 15 on the rear rotor / 4 double tines per tine arm Tine arms not detachable Gearbox type: sealed, maintenance-free MASTERDRIVE GIII gearbox Ground adaptation: 3D pendulum suspension Number of wheels per rotor: 4 pivoting wheels per rotor Tine height adjustment: hydraulic (via control terminal) Front rotor relief: constant hydraulic rotor relief Ltsdpfowqlmwsx Aanoa

Year of construction: 2021, condition: new, Fastech horizontal band saw BMSO 350 GA Cutting capacity (round) mm: 350 Cutting capacity (rectangular) mm: 400 x 350 Cutting capacity (square) mm: 350 x 350 +30° Round cutting range mm: 320 Ltedpfxjg Ekt Nj Aansa +30° Flat cutting range mm: 400 x 350 +30° Square cutting range mm: 350 +45 ° round cutting range mm: 320 +45 ° flat cutting range mm: 290 x 300 +45 ° square cutting range mm: 290 x 290 Engine power main drive kW: 2,2 Hydraulic pump power kW: 0,37 Coolant pump power kW: 0,12 Band speed, infinitely variable mm: 20-100 saw band dimensions mm: 4160x34x1,1 working surface height mm: 760 weight kg: 1050 length mm: 2450 depth mm: 920 Height mm: 2020 roller conveyor 1200mm infinitely variable belt speed hydraulic vice High performance gearbox Hydromechanical saw band tensioning Saw band brush Control system

Year of construction: 1988, condition: ready for operation (used), A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible. Ljdewfg Ewopfx Aaneta

Condition: new, +++++ We manufacture the original +++++ Non-binding offer Copper cable recycling machine Ltedpfx Aeflkz Heanoa 1 piece GA 37- 450 granulator cutting unit - completely mounted -incl. motor ( 37 KW ) - with inlet hopper, outlet hopper and belt protection cover - 1 set of knives ( 5 rotor knives and 2 stator knives ) - 1 sieve - mounting, system - integration in your plant - ex our factory Our general terms and conditions apply

Condition: used, mileage: 1,73,500 km, power: 228 kW (309.99 HP), first registration: 11/1997, fuel type: diesel, axle configuration: 2 axles, color: silver, gearing type: mechanical, emission class: euro2, Equipment: ABS, * Anfragen gerne per WhatsApp * Rangierfahrzeug * Sattelplatte * DL- Anschlüsse + Duomatik hinten * Balastgewicht hinten * Arbeitsbeleuchtung * Sonneblende * AHK + DL- Anschlüsse vorne * Zentralschierung * Differenzialsperre * Radio CD Ltjdei Alymepfx Aansa * Dachluke * el. FH * 6900 kg Leergewicht * Reifen 315/80R22,5 ca. 70-20% * deutsches Fahrzeug * · Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, · Verkauf nur an Gewerbe, Transport zum Hafen möglich, Dieses Angebot ist unverbindlich und freibleibend. Irrtum und Zwischenverkauf vorbehalten. · Keine Gewähr auf Eingabefehler. Besichtigungen nur nach Vereinbarung, WhatsApp

Condition: used, Year of construction: 1978, Gewinde-Ø 52 mm threading length 500 mm thread pitch entsprechend Hohlspindel -Ø 54 mm spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen Ltjdswt T Uhepfx Aanea voltage 380 V / 50 Hz main drive motor 3 kW total power requirement 4,5 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with pneumatic workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder,size: Z52/2B, + 21B • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition.

Condition: excellent (used), Ishida x-ray machine. Alarm and belt stop and. All S/S frame. Fully working Ltodpfx Aaovm Ahfjnoa

Condition: used, functionality: fully functional, An industrial air compressor is a machine used to increase the pressure and flow of compressed air to power various industrial tools, equipment and processes. Ltodpfx Aewnxzioanea

Year of construction: 2006, condition: ready for operation (used), Two identical Atlas Copco compressors including external heat recovery are available. Drive power: 132kW, max. operating pressure: 13bar, volume flow: 17m³/min, water temperature at 90kW: 90°C/70°C, machine dimensions X/Y/Z: approx. 2800mm/1900mm/2000mm, weight: approx. 3200kg, operating hours 1/2: 64290h/64765h. Including bypass flap for air cooling and electrical main switch. Documentation available. On-site inspection is possible. Expected to be available from mid-April 2025. Ljdpfx Asv N Iz Aoanjta

Condition: reconditioned (used), We manufacture the original We offer you a used, workshop overhauled pelletizer GA75 / 9 for sale. Ltjdpfoh S U Ryex Aansa - Engine power either 55 kw or 75 kw - 9 rotor knife rows, 4 stator knives - new rotor with completely new bearings and new hardened wear parts . Inquiries please only from tradesmen!

Condition: used, Year of construction: 1968, Gewinde-Ø 52 mm threading length 500 mm thread pitch entsprechend Hohlspindel -Ø 54 mm Ltedpfx Aov N N Scoansa spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen voltage 380 V / 50 Hz main drive motor 3 kW total power requirement 4,5 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with driven workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder, size: Z52/2B, + 21B • 5 sets of chaser jaws, pitch 1 - 2,5 mm Machine is in a good condition.

Year of construction: 2000, condition: ready for operation (used), Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible. Ltedpswfg Hhsfx Aanea

Condition: new, Year of construction: 2025, functionality: fully functional, sheet thickness (max.): 5 mm, total length: 950 mm, total width: 850 mm, total height: 1,175 mm, overall weight: 80 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.1 kW (1.50 HP), power: 1.1 kW (1.50 HP), Equipment: documentation/manual, CENTRIFUGAL DRYER MACHINE METAL CENTRIFUGAL DRYER Technical Specifications: Dryer Body Material: 5 mm iron thickness, painted with acid-resistant paint. Diameter: 58 cm Height: 80 cm Drying Basket Material: 1.5 mm stainless steel thickness, electropolished. Diameter: 44 cm Height: 32 cm Basket Volume: 50 liters Speed: 3000 rpm Centrifugal Motor: Power: 1.1 kW 3000 rpm Ltsdpfxsrkl Une Aansa Drying Fan Material: Aluminum Cast Motor Power: 0.25 kW Speed: 3000 rpm Heater Power: 2 kW heating tube External Dimensions: L: 850 mm W: 850 mm H: 1175 mm

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: Ltjdpfx Aaoq Nxrxsnja - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: used, Year of construction: 2018, functionality: fully functional, - Year of manufacture: 2018 - Fully operational - Made in Poland - Operating manual, CE certificate included TECHNICAL SPECIFICATIONS: - Four drilling units - Suitable for drilling both long and short components - First drilling unit: five drills - Second drilling unit: five drills - Third drilling unit: five drills - Fourth drilling unit: six drills - Adjustable drilling units, right and left - Three horizontal pneumatic clamps - Three vertical pneumatic clamps - One centering pneumatic clamp - Motor rotation (right): 3000 rpm - Motor power: 5 kW - Spindle stroke: approx. 160 mm Lsdpfx Aaew Iqdzonjta - Table height – working level: approx. 1000–1080 mm - Rated voltage: 3x400 V - Air pressure: 6 bar - Air consumption: 10 Nm3/h / 2m3/h Dimensions: - Length: 2300 mm - Width: 1700 mm - Height: 1500 mm - Weight: 750 kg

Condition: excellent (used), For sale: professional forestry winch Schlager & Reichart Maschinenfabrik (Marktoberdorf, Germany). The machine is fully complete, features a robust design with PTO drive, and is ready for forestry operations. Model: Type 5119 2R – 836 Year of manufacture: 1991 Pulling force (inner cable): 5 tons Pulling force (outer cable): 3.5 tons Cable diameter: 12 mm Working pressure: 155 bar Drive: PTO shaft, 540 rpm Structural strength (Bruchlast): 12.6 tons Solid guard, protective mesh, adjustable supports Ledjxcaaaspfx Aanota Full set of mechanisms, control levers, hydraulic outlets Condition as shown in photos – the equipment was previously used by a German municipal service (Stadt Gotha Gartenamt), meaning it has been regularly maintained and is in good condition.

Condition: excellent (used), CATALOGUE NUMBER 7768 TECHNICAL DATA - Max. workpiece width: 1100mm - Max. workpiece height: 180mm – From above: - Metal pressure roller - Unit – grooved rubber roller for calibration - Smooth, sliding rubber roller – From below: - Feed belt - Pneumatic belt oscillation with photo sensors - Electric table lifting - Two feed speed settings - Main motor: 15kW - Feed motor: 1.65kW - Operating pressure: 6–8 bar - Extraction outlet diameter: 200mm - Dimensions (L/W/H): 1700x2240x2020mm - Weight: 1652kg Ltjdpjxliybsfx Aansa FEATURES – Italian manufacture – calibrating sanding machine – Unpainted – Used machine in very good condition Net price: 16,900 PLN Net price: 4,020 EUR (subject to EUR exchange rate 4.2) (Prices may change with significant exchange rate fluctuations)

Year of construction: 1999, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3100 mm TONNAGE: 165 ton THROAT DEPTH: 450 mm DISTANCE BETWEEN UPRIGHTS: 2600 mm OPEN HEIGHT: 440 mm UPPER BEAM TRAVEL: 250 mm Ledpfx Aerk Sg Rjanjta APPROACH SPEED: 100 mm/sec RETURN SPEED: 120 mm/sec WORKING SPEED: 0-10 mm/sec MOTOR POWER: 18,5 kW CONTROL UNIT: DELEM DA 65 WEIGHT: 12020 Kg OVERALL DIMENSIONS: 4100 x 1880 x 2920 mm NOTE: No 2 FRONT SUPPORT BRACKETS; BOTTOM HYDRAULIC TOOL LOCKING

Condition: new, Year of construction: 2025, machine/vehicle number: ZCV50, ZCV 50 CIRCULAR TYPE VIBRATORY MACHINE Lodpfxjw Dp Eks Aansta * Net volume of 50 liters (Capacity from 20 L to 1250 L is available upon request) * Highly wear-resistant polyurethane (PU) lining (90 Shore) MOTOR: * High-performance three-phase drive motor * 0.34 kW, 1500 rpm * The motor is maintenance-free – no motor lubrication is required. CONTROL PANEL: * Main switch and emergency stop switch * Timer and working hours counter * Control box with switch for motor right/left rotation * CE safety standard PAINTING: * Colour in RAL 5011 & RAL 7036 * Epoxy paint is used to ensure long-lasting coating durability.