Used Sand Blasting Machine for sale (64,960)

Condition: used, Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles Hfjdot Tqy Ejpfx Aa Sef additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Year of construction: 2022, condition: used, Number of sanding units 6 st. sanding width 45-165 mm Sanding height max. 45-92 mm weight 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer ----- Full text as PDF attachment! Short description: Machine with infeed conveyor and automatic height detection. It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit. Technical manufacturer's description: Ecoline Q-Sand: the ideal grinder for squared timber and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, can also be used independently. It is also ideal for window frames, beams, and custom-made products, and optimizes processing times with automated systems and advanced production control. ----- Price of the above-mentioned machine available upon request! Hfjdpfxoxyafkj Aa Ssf ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net prices, excluding VAT. The video is from the manufacturer Ecoline and shows a new machine.

Year of construction: 2022, condition: used, Number of sanding units 6 st. Sanding height max. 120 mm Hfodpfx Aajynnttj Ssf output 12 kw

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, We offer a new table blasting machine – high-quality Czech manufacture, with premium materials used in production. Model: TSM 360-1.5 - Rotating table diameter: 1,500 mm - Maximum blasting part height: 550 mm - Total machine height: 3,000 mm - Total machine width: 2,000 mm - Total machine depth: 1,600 mm - 1x throwing turbine – power: 7.5 kW – with frequency inverter The turbine supports both left and right rotation. Hodpew Nbycjfx Aa Seff - Bucket elevator – power: 1.1 kW - Table rotation – power: 1.1 kW – with frequency inverter Table rotation can be manually controlled via button. - Total machine power: 9.7 kW The machine features a frequency inverter for adjustable turbine speed. A major advantage is the ability to switch turbine direction between left and right rotation. Blasting unit is CE-certified. Additional advantages include high blasting efficiency, quiet operation, low energy consumption, and minimal space requirements for installation. Within its category, this model stands out as a highly advanced table blasting machine due to its concept and design. (Blasting machine, sandblaster, shot blasting, blast cleaning, sand blasting, blasting equipment).

Condition: new, Year of construction: 2025, We offer a new table blasting machine – high-quality Czech production, made using premium materials. Model – TS 330/1. Hfsdpfx Aewt T Uzsa Sef - Diameter of rotary table – 1000 mm. - Maximum height of blasted part – 550 mm. - Overall machine height – 2750 mm. - 1 blasting wheel – power input – 5.5 kW. - Bucket elevator – power input – 0.75 kW. - Table rotation – power input – 0.75 kW - Total machine power input – 7 kW. We also manufacture table blast machines with table diameter – 1500 mm. Equipment with frequency inverter – regulating the rotation speed of the blasting wheel. A major advantage of the machine is the ability to change the turbine’s rotation direction to right or left. Blasting equipment comes with CE certification. Further advantages include high blasting efficiency, quiet operation, low energy consumption, and minimal space requirements for installation. Within its category, thanks to its design, this table blast machine can be considered highly advanced. (Sandblaster, sand blasting, shot blasting, sandblasting machine, blasting machine, blast cleaner). Blast machine.

Condition: good (used), Year of construction: 2020, operating hours: 340 h, Technical specifications: • Year of manufacture: 08/2020 • Operating hours: 340 • Dry ice capacity: 18.2 kg • Feed rate: 0–2 kg/min • Dimensions: 91.4 × 50.8 × 101.6 cm • Weight: approx. 117 kg • Air consumption: 1.4–4.7 m³/min at 5.5 bar • Blasting pressure range: 1.4–17.2 bar Hsdpfx Aasywawws Sjff Includes hose package, gun, and round nozzle. Net price plus 19% VAT.

Condition: ready for operation (used), functionality: fully functional, grinding length: 4,000 mm, grinding diameter: 600 mm, JUARISTI Cylindrical Grinding Machine - Distance between centres: 4,000 mm - Maximum grinding diameter: 600 mm Hjdpfjyzi Nkox Aa Ssff - Grinding wheel diameter: 750 mm - Supplied with 3 steadies of different diameters - Equipped with DRO (Digital Readout) on the cross axis - Includes internal grinding attachment with two spindles of 1,000 & 1,500 mm

Condition: like new (used), functionality: fully functional, AUTOMATIC EDGE SANDING machine with 3 units , model TONELLI OTB.15 ( made in ITALY ) second hand machine working condition: Excellent, like new CE regulation: YES Voltage: 380/50 for sanding panel edges, on raw and painted edges, flat and shaped, solid, veneered, profiles, frames and various Hjdpfx Aajywzchs Seff technical data: electric working height adjustment minimum working height: mm.3 maximum working height: mm.100 minimum working width: mm.60 track feed speed adjustable from the control panel: from 5 m/min to 30 m/min track feed with rubber pads and adjustable rubber pressure wheels feed track motor power: 2 HP machine composed of 3 independent units: 1° Unit : Tilting oscillating sanding unit - Pneumatic pad - Motor 2 speeds Hp 1,9 / 3,3 - Automatic group entry - Belt cleaning blower 2° Unit : 45° oscillating sanding unit - Pneumatic pad - Motor 2 speeds Hp 0,6 / 1,2 - Automatic group entry - Belt cleaning blower 3° Unit : 45° oscillating sanding unit - Pneumatic pad - Motor 2 speeds Hp 0,6 / 1,2 - Automatic group entry - Belt cleaning blower Removable support for panel support Installed power: 10 kW Overall dimensions: 3600 x 1600 x 1600 mm Weight: 2000 kg

Condition: new, Year of construction: 2022, Belt width: 150mm Belt length: 2600mm Oscillation: yes Hfodpfx Ajiuld Doa Ssf Sanding rollers for curves: 1 Sanding unit can be swivelled: yes Table size: 750mm x 290mm Suction connection: 120mm Motor power: 3kW Machine length: 1700mm Machine width: 700mm weight: 180kg

Condition: good (used), functionality: fully functional, overall weight: 95 kg, power: 2.25 kW (3.06 HP), Oscillating sanding belt, height-adjustable work table, adapter for dust extraction (diameter 120mm), aluminum work table, sanding unit infinitely tiltable from 0° to 90°. BG wood dust tested. Hsdpfjug Uynox Aa Soff Technical data: Voltage 400V, 50/60 Hz Belt motor power: 2.25 kW Motor speed: 3400 rpm Belt speed: 20m/sec Work table: 620x220mm Belt dimensions: 2250x150mm Weight: 95kg

Condition: new, Working width: 381 mm Working height: 150 mm Main engine 7,5 HP 3P Feed motor 1/4 hp Feed speed 6.2 m/min grinding belt dimension 405 x 1372 mm Machine size 1000 x 730 x 1680 mm Hjdpfxjk Rit Nj Aa Sjff Packing size 750 x 830 x 1900 mm N.W./G.W. 450/500 kg You can call or write us. We can speak and write German and Russian. You can also send messages in English. 34.4.4.

Condition: used, used 2-belt sander 1x with continuous pneumatic pressure feed 1x sanding unit 100 mm vacuum clamping device Manufacturer: Heesemann Type: BA2 Machine no. 7304051 Motor: 7.5 / 11 kW Sanding length approx. 2550 mm Sanding width approx. 100 / 150 mm Belt length approx. 8500 mm Table size approx. 2550 x 1350 mm Throat (right) approx. 600 mm Upper belt cover Table lighting Vacuum clamping device with pump 9 vacuum suction plates Belt speeds 710 / 1430 m/min Sanding shoe 2450 mm Extraction connection D 180 / 250 mm Required space approx. 4500 x 1400 x 1800 mm Hsdpoyvvr Usfx Aa Sjff Weight approx. 1500 kg Total connected load approx. 12.5 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as seen, as inspected, without warranty or guarantee

Condition: used, Year of construction: 2000, used, top equipment, excellent condition, low hours Manufacturer: Johannsen Model: T94 Year of manufacture: 2000 Machine no.: 22138 Hfodoyvvr Iopfx Aa Sof CE type tested GS wood dust tested Motor: 5.5 / 0.25 kW Sanding length: approx. 2600 x 960 mm Sanding width: approx. 960 mm Belt length: approx. 7800 x 150 mm Table size: approx. 2790 x 960 mm Throat depth right: approx. 850 mm Electric adjustment Upper belt cover Upper sanding support Table lighting Belt speeds: 1434 m/min Right-left travel Belt blow-off Sanding shoe: 300 x 140 mm Extraction connection: D 180 mm Required space: approx. 4000 x 1500 x 1500 mm Weight: approx. 1000 kg Total connected load: approx. 5.7 kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: used, Year of construction: 1997, functionality: limited functionality, - Oscillation defective - Main switch replaced Hfodpfeyi Ug Ajx Aa Sof - Machine is operational - Sold without warranty

Year of construction: 1996, condition: excellent (used), TUBE BLASTING MACHINE.Machine is used to clean the inner surface of the copper tube in a continuous process of blasting. Hfedspmtb Ropfx Aa Ssf

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 03/2027, type of input current: three-phase, Lye Coating Machine Drautz RD 100 Compact design One-person operation & easy cleaning Double lye curtain With stripping unit Connection: 400V, 16A CEE plug Used machine With warranty & spare parts service Hsdpsxmrbdofx Aa Seff Quality from a specialist company! Benefit from over 35 years of experience! Options: Maintenance contract Service package Salting unit Delivery service Spare parts box for increased safety Training & commissioning Visit our extensive selection!

Condition: used, Year of construction: 2019, operating hours: 1,580 h, functionality: fully functional, total length: 1,100 mm, total width: 670 mm, total height: 1,440 mm, overall weight: 410 kg, power: 3.55 kW (4.83 HP), rotational speed (min.): 2,480 rpm, rotational speed (max.): 1,220 rpm, grinding width: 250 mm, The Bomar orbital 250 NS machine has served us well for edge grinding of profiles. However, as our production has changed, we no longer have use for it. The machine is ready for further use and available for immediate collection. We can arrange loading of the machine onto the customer’s transport. Hsdpfx Aoyn Dyvsa Sjff

Condition: new, Deburring machine brand: Aboagye Model: AF 165 Condition: new machine Speed: 2,800 RPM maximum cutting width: 1 mm Hjdpfx Aajdurxno Ssff equipped as standard with: -Special flap disc K80-ST -Suction nozzle -Manual

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, grinding height: 100 mm, overall weight: 500 kg, grinding width: 300 mm, 3-sided profile sanding machine / brush sanding machine Manufacturer: Loewer Model: MultiMaster LZ 3 Compact 3-sided sanding machine for mouldings, facade boards, profiled timber, etc. The machine comes from a flooring and panel manufacturing facility. Year of manufacture: 2006 CE mark Working width: 300 mm Max. pass-through height: approx. 100 mm Fitted with 4 sanding brush units: - 2x from above - 1x from the left - 1x from the right Hfodpfx Aaeyinw Uo Sof Spindle diameter: approx. 30 mm Max. brush diameter: approx. 300 mm Brush speed infinitely variable Feed rate infinitely variable, max. approx. 16 m/min Voltage: 400 V, 50 Hz, 3-phase On-site circuit protection: 20 A Weight: approx. 500 kg

Condition: ready for operation (used), Year of construction: 1989, grinding belt length: 2,600 mm, grinding belt width: 150 mm, space requirement width: 900 mm, space requirement length: 1,650 mm, Langzauner LZK 3/2 edge sanding machine motor power 2,2kW Belt dimension 2600 x 150 mm Belt speed 20m /sec Table dimensions 1000 x 350 mm Height adjustment 200 mm Weight 300 kg Space requirement 1650 x 900 mm Hsdpfx Aaorgpw Aj Sjff Sanding unit 45° tiltable Veneer sanding unit Oscillation Feed console year of construction 1989 Condition: fully functional

Condition: excellent (used), Edge Sander De Stefani MVT 2 sanding units Maximum workpiece height: 80mm Self-adjusting sanding unit Manual adjustment of sanding unit Hedpfx Aeydkbfsa Seff Manual angle adjustment of unit Oscillating sanding units Feed speed controlled by variator Feed motor power: 0.74 kW

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm Hfedpfx Aaoxrb Rfo Sof - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Year of construction: 1999, condition: used, machine/vehicle number: 942, - Manufacturer: Fladder - Type. Gyro 300 VAC Ex - Working width 1300 mm - Year of construction 1999 - Number of brush heads 6 pcs. - Rotating and oscillating sanding unit - 2 vacuum fans- Motor power 7.5 kW Hedpfjvwa Drex Aa Soff - With vacuum conveyor belt - Electrical connection switch cabinet 1, machine 10kW - Electrical connection switch cabinet 2, vacuum fan, 15kW - Feed infinitely variable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Separate switch cabinet, Dimensions: W: 800mm, Depth: 400mm, Height: 1700mm - Location, in stock - Volt, HZ 400 / 50

Condition: used, Year of construction: 2005, machine/vehicle number: A41213AC1, Technische Daten: - Hersteller: Costa - Typ.: SA TS 1350 - Baujahr: 2005 - Arbeitsbreite: 1.350 mm - Schleifbandmaß: 2.620 x 1.380mm - Schleifhöhen: 3-160m - Vorschubgeschwindigkeit: 5 -25m/min. - 1. Aggregat: - Längschleifaggragat - Bandmaße: 2620 x 1380mm - Elektronischer Schleifschuh, System Costa - Tastrollenabstand: 32mm - Segmentbreite: 32mm - Motorleistung Antrieb, 11kW - Entstauberbürste Durchmesser: 180mm - Bedienseite: links - Höhenverstellung: motorisch - Vakuum Transportband - Gesamtanschluß 20KW / 43A - Breite: 1.924mm - Länge: 2.059mm - Höhe: 2.185 - 2.375mm - Absaugstutzen: D 2x100mm + 2x160mm - Volumenstrom: 4.830m³/h bei 24m/s Hodpfx Aaex Ex Tmo Sjff - Druckluft: 6bar, 880NL/min. - Volt, Hz 400 / 50 - Spannungsschwankungen max. +/- 5 % - Gewicht 3.100kg - Standort, am Lager Blomberg

Condition: used, Year of construction: 1995, functionality: fully functional, grinding height: 100 mm, grinding length: 3,250 mm, We are offering this used Löffler KSL-100 MG edge sanding machine, year of manufacture 1995. Manufacturer: Löffler Maschinenbau GmbH Langenaltheim / Bavaria Model: KSL-100 MG Hjdjythu Ijpfx Aa Seff Serial number: 95.005/6/95 Year of manufacture: 1995 If you have any questions or require further information, please feel free to send us a message or give us a call.