Used Sanding Machine for sale (65,280)

Condition: used, Year of construction: 1991, EDGE SANDING MACHINE LZK 4: Langzauner edge sanding machine LZK Machining and sanding of all types of wood, also in combination with plastics Year of manufacture: 1991 Motor power: 3 kW Belt speed: 22 m/sec Belt dimensions: 3000 x 200 mm Table size: 1250 x 350 mm Height adjustment range: 200 mm Extraction port diameter: 110 mm Minimum air speed: 20 m/sec Extraction capacity: 700 m3/h Total weight: 450 kg Total connected load: 3.2 kW Operating voltage: 3 x 380 V 50Hz Tedpfxew A Aa Ej Airod Required space: 1900 x 900 mm All technical data and information as per brochure

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Tsdpfx Ajt Tqy Eeired Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: like new (used), functionality: fully functional, Sanding unit with shoe pneumatic oscillation feed speed adjustment via variator: 5–30 m/min maximum working height: 100 mm minimum working width: 10 mm machine width: 2000 mm machine height: 1900 mm power supply: 380 V year of manufacture: 1999 Todpszz Nlcefx Airjd

Condition: good (used), Year of construction: 2006, I sell the 3-side brushing machine Wikoma SP-3/300 - 1350/2x15°/P, Year 2006. 2 pcs. Surface brushes from top Working width 1350mm Vacuum underpressure table with ventilator. Adjustable rotation and feeding speed. Suitable for rustical brushing and patina surface. Profiles possible. Made in Italy Tsdpfovyln Iex Aired Available immediately.

Condition: new, Year of construction: 2024, working width: 950 mm min. workpiece height: 4 mm max. workpiece height: 170 mm height adjustment: electrically read out height: digital electronic control: Fox 500 KTR aggregates: 1 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad dust brush: no motor power: 7,5 kW suction connection: 140 mm machine length: 1388 mm machine width: 1545 mm machine height: 1668 mm Tsdpfjknyhlsx Airsd weight: 660 kg

Condition: new, Year of construction: 2026, Belt width: 200 mm Belt length: 2600 mm Oscillation: yes Sanding rollers for contours: 1 Tilting sanding unit: yes Tsdpeyvz Riefx Aired Table size: 930 mm x 300 mm Extraction connection: 140 mm Motor power: 3 kW Machine length: 1700 mm Machine width: 700 mm Weight: 280 kg

Condition: used, Model making machines Including over 100 canvas belts Including approx. 30 15 mm belts, approx. 30 30 mm belts, approx. 10 40 mm belts Including 11 profile sanding rods Tjdpfx Aewhqxajirjd Used, excellent condition, little used Make: Zimmermann Type: PS 1 Belt length: 2700 mm - 2710 mm Extraction connection diameter: 80 mm Space required: approx. 1000 mm x 600 mm x 1800 mm Weight: approx. 400 kg Storage location: 97447 Gerolzhofen, free on freight, unpackaged Sold in the current condition, as seen, without warranty or guarantee

Condition: excellent (used), KÜNDIG BASIQ Single-sided edge sanding machines Tedpfxo Agm H Ij Airjd 1 single-sided sanding unit, standard configuration for sanding solid wood edges, oscillating, manually adjustable in height, tiltable Sanding belt width up to 200 mm Drive motor 2.2 kW

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: VO995, total length: 1,700 mm, total width: 1,000 mm, total height: 1,150 mm, table length: 880 mm, table width: 370 mm, overall weight: 260 kg, power: 2.2 kW (2.99 HP), grinding width: 150 mm, grinding length: 2,580 mm, Machine type: LVO 120, Machine number: VO995, Year of manufacture: 2009, Main motor: 2.2 kW, Oscillating motor: 0.11 kW Tedpfx Ajy Nznusirsd

Condition: used, Vertical grinding machine, surface grinding machine DORMAC / DORIA type Perseo Cup grinding machine Tedpsvkgvhefx Airjd No. 786 Year of manufacture 1987 Sanding area 500 x 250 mm Magnet 400 x 150 mm Grinding height grinding wheel - magnet approx. 190 mm Grinding height grinding wheel - clamping surface table approx. 235 mm Grinding wheel diameter 175 mm Table longitudinal movement approx. 600 mm Grinding wheel speed approx. 2800 rpm Motor power approx. 2.2 kW Mains connection 380 Volt, 50 Hz - Manual depth adjustment via handwheel, travel per handwheel rotation, Z-axis 2.5 mm = 0.01 mm per graduation mark - handwheel on the right of the spindle housing, fine adjustment via knurled wheel on the handwheel - Manual transverse adjustment via handwheel, travel per handwheel revolution, Y-axis 2 mm = 0.01 mm per graduation mark - Hydraulic longitudinal table movement - mechanical magnet WAGNER, type 0112N-15/40-4 400 x 150 mm, height 45 mm - Wet grinding unit with settling filter opposite - 2 grinding wheels Ø 175 mm - 1 grinding wheel holder - 1 balancing device for the grinding wheels Space requirement L x W x H 1500 x 1100 x 1800 mm Weight 570 kg good condition

Condition: good (used), Code: 0351 Tjdpfx Aijy A Sq Tersd Brand: VOLPATO Model: LS - 1N - CE Standard Automatic edge sanding machine for edges and profiles in wood, solid wood, veneer, painted and various materials - CE Standard Technical data Max working height mm 110 Min working length mm 100 Variable-speed belt feed 5–30 m/min – Motor Kw 1,5 Tilting oscillating sanding unit – 2-speed motor 700–1400 rpm – Power 2 Hp Pneumatic belt tensioner – Timed entry and exit of the pad Mechanical oscillation of abrasive belt 0/20 mm Lifting and tilting via handwheel with special key Removable support for large panels Abrasive belt dimensions 80 x 2450 mm Suction inlet diameter 100 mm Compressed air 5–6 atm Overall dimensions mm 2600 x 1400 x 1500 h Weight kg 720

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or give us a call. If needed, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable from 5 to 25 m/min, frequency-controlled, working height constant at 880 mm, including integrated control cabinets; Including adjustable stop ruler with digital readout and including counter fence with central width adjustment with central height-adjustable and laterally adjustable top pressure bar with digital display, which presses plate-shaped workpieces with ball-bearing rubber rollers (roller pitch 38 mm), including support rollers to extend the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 side guide rollers between the sanding units for secure transport of strips 1 Industrial PC 3.0/4" LCD-TFT color display, 800 x 600 pixel resolution CF card 1GB Operating system: Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection available. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, with intermittent belt blow-off device, belt break detector, tool holder with quick-change device, base plate for sanding tool, prepared for electronic path control for automatic engagement and disengagement of the sanding tool, operating in both climb and counter rotation. Belt dimensions: 2,300 x 80 mm Belt speed: 0/7–12 m/s Motor rating: 3.0 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. Tsdey A D Ecspfx Aired 2 oscillation devices (positions 1 + 2) For optimal belt utilization 2 belt sanding units "K 4" – positions 3 and 4 incl. stand, for sanding small profile sections, also suitable for edge rounding; can be swiveled 90° upwards and 45° downwards, belt break detector, tool holder with quick-change device, base plate for sanding tool, intermittent belt blow-off device, prepared for electronic path control for automatic engagement and disengagement of the pressure tool, including climb and counter rotation, designed for manual adjustment and digital indicators for the adjustment axes. Belt dimensions: 2,000 x 50 mm Belt speed: 0.5–8 m/s Motor rating: 1.1 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 4 electronic path controls for fully automatic, timed engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and angle position of the units. 2 steel tools for straight edges, equipped for air cushion sanding, incl. base plate, for 1 "M4" unit, item no. 9000191310 2 steel profile tools equipped for air cushion sanding, incl. base plate, for 1 "K4" unit, item no. 20000025684

Condition: excellent (used), maximum belt width 240 mm mechanical oscillation cast iron housing Todpfxjzmwdds Airjd dimensions of the side table: 800x450 mm two motors, 4.5 kW each manual adjustment of the unit spacing

Condition: used, LASM belt edge grinder, Double-sided grinder, capable of sanding on a platen or a flat surface, 380V power supply, 3KW motor, 150mm wide abrasive belt, Oscillation, Angle-adjustable table, Tedpszxz Taofx Airod Used machine, ready for operation.

Condition: used, Used Machine Year of manufacture: 1988 Features and technical specifications: - Length of work tables: 1440 mm - Total width of the two work tables: 710 mm Tsdjzk Ny Eepfx Aired - Tilt adjustment of the work tables: 0–30 degrees - Operating pressure: 6 bar - Sanding belt length: 2170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10–20 m/sec - Vertical adjustment of the oscillating unit: 125 mm - Air consumption: 25 NL/min - Electrical specifications: 400 V / 2.9 kW Weight: 490 kg Availability: available shortly Location: Röllbach

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: 01810, 7 Face grinding supports 2 Top chamfering tools 2 Bottom chamfering tools 1 Water groove milling support 1 Milling support Infeed and outfeed roller conveyor Belt running direction: left to right Water trough Todezy Eh Ropfx Airod

Condition: as good as new (ex-display), Year of construction: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 "Z" Designation for RTC 135 5257452 Vacuum table with electric fan 3 kW 5257453 Oscillating belt air-blast device for 5257454 Oscillating belt air-blast device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Grooved rubber pressure roller, 2nd position 5257500 Grooved rubber pressure roller, 3rd position 5257504 Infinitely variable conveyor feed with inverter 5257605 Door with inspection window 5257606 LED lamp for internal illumination TECHNICAL DATA Dimensions and Weights Length (product) approx. 1800 mm Width/depth (product) approx. 2000 mm Height (product) approx. 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (motor power): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Max. sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Tjdpfxsy Ehiwj Airod Workpiece Min. workpiece height: 4 mm Max. workpiece height: 170 mm Product Information EU 2023/2854 Type of generated data: usage data Format of generated data: common, machine-readable formats, e.g., JSON Data volume: up to 5 MB Continuous real-time data generation: yes Data storage location: on the device and a remote server Data access: on the device and via physical and wireless interfaces Location: ex stock 54634 Bitburg - immediately available -

Condition: used, used, top condition Todpsy H N Tmofx Airsd Machine cleaned and lubricated Partially overhauled. Emergency stop button renewed. All sliding pads replaced Motor cover repaired. Oscillation overhauled and adjusted. Test run conducted Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Front table approx. 1400 x 220 mm Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation Tedpfjwyda Uox Airjd finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Year of construction: 2022, condition: used, Number of sanding units 6 st. sanding width 45-165 mm Sanding height max. 45-92 mm weight 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer ----- Full text as PDF attachment! Tedpfx Asxyafkoirjd Short description: Machine with infeed conveyor and automatic height detection. It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit. Technical manufacturer's description: Ecoline Q-Sand: the ideal grinder for squared timber and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, can also be used independently. It is also ideal for window frames, beams, and custom-made products, and optimizes processing times with automated systems and advanced production control. ----- Price of the above-mentioned machine available upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net prices, excluding VAT. The video is from the manufacturer Ecoline and shows a new machine.

Condition: excellent (used), Year of construction: 1993, Edge sanding machine Arminius SP31 In very good condition. Tjdor Nbktepfx Airsd

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 02/96088A, total length: 7,500 mm, total width: 2,000 mm, total height: 2,000 mm, overall weight: 7,500 kg, Edge grinding machine with 10 programmable profiles, including rounded edges Pre-milling cutter 10 face milling operations Tjdpfx Aijzpy Drersd 4 chamfering operations 2 water break grooves Calibration support Belt feed direction from left to right Deburring cutter Unit for water break grooves from above and below Can grind 9 profiles – e.g., bullnose, full round, half round, small rounding on the top and bottom, chamfered, quarter round.

Condition: used, overall weight: 1,500 kg, workpiece length (max.): 2,500 mm, workpiece width (max.): 190 mm, workpiece height (max.): 200 mm, grinding belt length: 1,800 mm, grinding belt width: 200 mm, transport length: 2,650 mm, transport width: 1,100 mm, transport height: 2,000 mm, Equipment: CE marking, documentation/manual, No. 04555 Double-sided sanding machine LÖWER DSM 2000 Used For sanding both sides of wooden workpieces in a single pass 2 belt sanding units, top and bottom Max. workpiece width 190 mm Max. workpiece height 200 mm Max. workpiece length 2500 mm Todpfxoz N Ixce Aired Sanding belt width 200 mm Sanding belt length 1800 mm Sanding belt speed 1300 m/min Sanding motor power 2x 5.5 kW Sanding motor speed 2870 rpm Feed speed 6 / 11 / 16 m/min Workpiece feed via conveyor belts Motorised height adjustment Height adjustment motor power 0.37 kW Digital workpiece thickness display Sanding belt oscillation Pneumatic sanding belt tensioning 2 brushing units, top and bottom Brush diameter 120 mm Brush length 190 mm Compressed air operating pressure 6 - 8 bar Dust extraction connections 2x Ø 150 mm and 2x Ø 120 mm Required extraction airflow 2515 m3/h Minimum air velocity at the extraction connection 20 m/s Negative pressure at the extraction connection 889 Pa Electrical connection 400 V / 50 Hz / three-phase Required on-site fuse rating 32 A CE marking Technical documentation including operating manual available Transport dimensions approx. 1600 x 1500 x 1800 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Technical specifications: Tedpfxjziagyj Airod Max. grinding width: 300 mm Grinding unit with shoe Pneumatic belt tensioning Working pressure: 6 bar Work table length: 1250 mm Built-in fan Fan motor power: 0.7 kW Motor power: 5 kW Overall dimensions: Length: 1300 mm Width: 850 mm Height: 1300 mm

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101780, total length: 4,300 mm, total width: 720 mm, total height: 1,390 mm, type of input current: three-phase, input voltage: 400 V, feed rate X-axis: 6 m/min, power: 8.4 kW (11.42 HP), We offer this used Rehnen KBA edge sanding machine, year of construction 2008. Manufacturer: Rehnen Model: KBA Year of Construction: 2008 Condition: used Category ID: 826 Type ID: 94 Type: edge sanding machine Tsdjyvfwropfx Airjd Aggregates total: 5 Moulding aggregates: 2 Sanding aggregates: 3 Workpiece width min mm: 60 Workpiece thickness max mm: 90 Feedrate max m/min: 6 Aggregates oscillating: Yes Sanding belt: Yes Profile sanding pad: Yes Milling aggregate vertically scanning: Yes Stepless rotational speed control: Yes Clamping system: Upper pressure rolls Jump-in control: pneumatic CE marking: Yes Total connection kW 6,50 Required space LxWxH mm 4300x720x1390 Availability short-term, ex location customer! If you have any questions or need more information, feel free to send us a message or give us a call.