Used Saw Blade Sharpening Machine for sale (65,665)

Condition: excellent (used), Year of construction: 2002, operating hours: 1,870 h, Tilting panel saw T 73 by Martin, equipped with 3-axis scorer and 3m sliding table Sliding table length: 3000 mm Saw blade tilting range: 0 to 46 degrees Speeds: 2800, 4000, and 5500 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Bedpfx Afextvcxehslc Saw blade diameter up to 500 mm Maximum cutting height: 170 mm Cutting width up to 1100 mm, adjustable from the front via handwheel and manually movable Tilting angle and height electrically adjustable Crosscut fence with 2-point stop up to approx. 3350 mm Parallelogram cross table with digital angle display and roller Folding rip fence Extraction ports: 120 + 100 mm Sliding table can be locked in any position Handle Edging shoe 1 set of plastic saw blades with matching 3-axis scorer, freshly sharpened 3 riving knives 3-axis scorer unit, fully electrically adjustable while the machine is running 2 blade guards Miter fence for acute angles Tool compartment Emergency stop switch Operating manual CE marking The machine shows minor signs of use on the anodized sliding table. Small cuts on the sliding table have been repaired. Original paintwork, only touched up in a few places. Excellent condition as seen in the original photos. Dimensions approx. 3300 x 3750 x 1600 mm (LxWxH). Weight approx. 1950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: excellent (used), CATALOGUE NUMBER 7603 TECHNICAL SPECIFICATIONS - automatic sharpening speed - tooth counter - suitable for wide band - grinding wheel size: 240 mm - motor power: 0.12 kW, 0.75 kW, 400 V - dimensions (L/W/H): 3600x1600x1500 mm - weight: 140 kg ADVANTAGES – made in Poland – with tooth counter – for wide band – unpainted Bodpfx Aoyarcijfhjlc – used sharpening machine – in very good condition Net price: 6900 PLN Net price: 1640 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7652 Technical specifications: - Track width: 350mm - Cutting width: 370mm - Blade diameter: 400 to 450mm - Cutting height for 350/400mm blade: 160mm - Spindle diameter: 70mm - Table dimensions: 1850x800mm - Height from base to table: 750mm Top section: - Pawls/deflectors - 2 smooth, metal sliding shafts - Shaft with saw blades - 3 smooth, metal sliding shafts Bottom section: - Guide bar - Pawls/deflectors - Track - Toothed, extracting drive shaft - Electric body height adjustment Bsdpfx Ajyaq H Hjfholc - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 2.2kW - Main motor: 55kW - Extraction nozzle diameter: 200mm - Overall dimensions (L/W/H): 2560x1700x1900mm - Weight: 2700kg ADVANTAGES – Made in Germany – Technical documentation (DTR) – Used multi-blade saw – Very good condition Net price: 39,900 PLN Net price: 9,500 EUR depending on an exchange rate of 4.2 EUR (Prices may vary with major currency fluctuations)

Condition: excellent (used), Catalogue number: 7548 TECHNICAL DATA Track width: 250 mm Shaft width: 250 mm Max saw blade diameter: 350 mm Saw blade bore diameter: 80 mm Max cutting height: 120 mm Table width with gap: 700 mm Table length: 1790 mm *From above: Ratcheting pawls Pressure roller, smooth Ratcheting pawls Pressure roller, smooth Shaft with sawblades Bledoyaq Hgopfx Afhjc Smooth pressure rollers: 2 pcs From below: Guide Smooth sliding roller Ratcheting pawls Track Central lubrication Feed motor: 1.1 kW Main motor: 30 kW Electric body lifting Manual saw shaft lifting Extraction nozzle diameter: 160 mm Overall dimensions (L/W/H): 2250x1700x2000 mm Weight approx.: 3000 kg – German-made – Electric lifting of body and saw shaft – Smooth feed speed adjustment – Used multi-blade saw, in very good condition Net price: PLN 68,900 Net price: EUR 16,400 at the rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: ready for operation (used), total height: 3,340 mm, total length: 4,500 mm, total width: 1,950 mm, throat depth: 660 mm, Type: ONL 660x700 ACN Heavy duty double column bandsaw specific for high-alloy steels CNC touch control with saw parameters for various types of high-alloy steels cap round: dia 660 mm cap square: 660 x 700 mm bundle cap: 555 x 700 mm autofeed with stroke of 500 mm (with unlimited repositioning) sawing power: 18,5 kW the in-feed and sawing speeds are frecquency controlled enlarged height of sawblade: 67 mm chipconveyor equipped with fully motorized Weisshaupt rollerconveyors: - 10,3 meter in-feed rollerconveyor (outside) with 2 hydraulic clamps for aligning workpiece - 9 meter in-feed rollerconveyor (inside) with 2 hydraulic clamps for aligning workpiece - max workpiece width: 900 mm - each roll is motorized - cap of one roll is 4 ton - 4 meter out-feed rollerconveyor: one rollerconveyor is equipped with scales to weigh workpiece after cutting (Sartorius system) Max height of workpiece: 700 mm Sawspeed: 10 > 120 m/min Length of band saw: 8660 x 67 x 1,6 mm Power needed: 27 kW (58 amp) Weight: 8,5 ton (only machine) Bsdjygywuepfx Afhslc

Condition: ready for operation (used), Capaciteit slang: max. 2 inch / 50 mm Blodeygywhspfx Afhjc De slang wordt via een rupsbandsysteem in de machine gevoerd en aangestuurd door een elektromotor De invoersnelheid is instelbaar van 0 tot 40 m/min De afstand tussen de banden op het rupsbandensysteem wordt handmatig ingesteld met een handwiel dat is uitgerust met een digitale teller Capaciteit: 500 programma's Eén programma omvat: de onderdeellengte, het aantal onderdelen, de verlengingsregelaar, de loopsnelheid van de slang, de naam van de slang, het programmanummer en de diameter van de slang De slang wordt gesneden met een speciale gekartelde schijf: 520x4x40mm 9 kW spindelmotor met rem Rotatiesnelheid: 3000 tpm Tijdens het snijden houden twee scharnierende kaken, handmatig verstelbaar door een wiel, de slang vast en geleiden deze Het buigen van de slang en het voortbewegen van de snijkop worden uitgevoerd door twee pneumatische cilinders Luchttoevoer: 6 bar Afmetingen H x B x L: 1300 x 1300 x 1350 mm Gewicht: 580 kg

Condition: ready for operation (used), empty load weight: 900 kg, semi-automatic with hydraulic clamping same as Kaltenbach type KKS Dia saw / abrasive - disk: 425 mm Bedsygyx Sjpfx Afhjlc Max dia workpiece at 90°: dia 140 mm Max dia workpiece at 45°: dia 140 mm Max dimensions workpiece at 90°: 300 x 60 mm / 140 x 140 mm Turningspeeds: 13 + 26 m/min Power needed / motorpower: 2,9 kW Angle-input system (mitre)(number+°): R : 60° - L : 90°

Condition: ready for operation (used), Year of construction: 1980, Band saw machine Make KÖLLE Type:ST 105 Year 1980 Bedsmp Trwspfx Afholc overhang 1050 mm with saw band - welding device IDEAL . Infinitely variable speeds. Machine ready for use condition.

Condition: good (used), Year of construction: 1992, Automatic band saw JAESPA Type:W400 AZ Control Minipos 807 year 1992 Cutting diameter round material max. 400mm Sägebandlänge:5500X32X1,1mm Feed automatic cut length min.20mm Chip conveyor Total power requirement 4 Kw Weight approx.2500kg Blodpjgf H Sajfx Afhec Accessories 2X saw blades, roller table 6m motor drive, machine documentation available. Footprint : 2,8X2,8X2m

Condition: used, cutting height (max.): 105 mm, cutting width (max.): 1,550 mm, cutting length (max.): 2,500 mm, total length: 430 mm, saw blade diameter: 350 mm, cutting height with scoring (max.): 105 mm, – Polish production – DTR technical documentation – Electric saw blade spacing adjustment – Pneumatic clamps – With scorer unit TECHNICAL PARAMETERS: Bledpfxoyaazyo Afhec – Max. blade diameter: 350 mm – Spindle diameter: 30 mm – Height-adjustable blade (up/down) – Blade guard – Max. cutting height: 105 mm – Min. cutting width: 250 mm – Max. cutting width: 1550 mm – Max. cutting length: 2500 mm – Electric saw blade spacing adjustment – With scorer unit – Max. scorer blade diameter: 125 mm – Scorer spindle diameter: 20 mm – Main motor power: 2 x 4 kW – Scorer motor power: 2 x 0.75 kW – Carriage feed motor power: 0.37 kW – Pneumatic clamps: 2 pcs – Extraction port diameter: 2 x 120 mm – Machine transport dimensions (L/W/H): 430 / 140 / 110 cm – Weight: ~1000 kg

Condition: used, Year of construction: 2022, Sliding table: 3200 mm, cutting width: 1000 mm, CNC parallel fence, scoring unit, angle stop with digital display, electro-motorically tiltable and height adjustable, control panel at eye level. Storage location: Nattheim. Bodpfx Aexqtvqefhelc

Condition: excellent (used), Catalogue number 7865 TECHNICAL DATA - max blade diameter: 315mm - spindle diameter: 30mm - blade guard included - max cutting height: 40mm Bedpfx Aox U Tvhjfhelc - min saw spacing: 180mm - max saw spacing (edge-to-edge): 2400mm - manual saw spacing adjustment - main motor power: 2x3kW - feed motor power: 0.74kW - feed with inverter + forward/backward - overall dimensions (LxWxH): 3300x1000x1600mm - weight: 250kg ADVANTAGES – Made in Poland – Manual saw spacing adjustment – Very good condition – Unpainted – Double-saw, used Net price: 7,900 PLN Net price: 1,880 EUR based on exchange rate 4.2 EUR (Prices may change with major rate fluctuations)

Condition: excellent (used), Catalogue number 7864 Bodpsx U Tqxjfx Afhelc TECHNICAL DATA - Track width: 300 mm - Shaft working width: 310 mm - Max. disc diameter (currently fitted 300 mm): 350 mm - Bore diameter: 70 mm - Maximum cutting height: 120 mm - Table width with extension: 750 mm - Table length: 1540 mm - From above: - Kickback pawls - Metal sliding roller - Kickback pawls - Metal sliding roller - Shaft with saw blades - 2 smooth metal sliding rollers - From below: - Guide rail - Kickback pawls - Track - Central track lubrication - Stepless feed speed adjustment - Feed motor 1.1 kW - Main motor 26 kW - Extraction nozzle diameter 200 mm - Overall dimensions (L/W/H): 1800x1350x1450 mm - Weight approx. 1700 kg ADVANTAGES – Italian made – Very good condition – Used multi-blade saw Net price: 37,900 PLN Net price: 9,000 EUR depending on the rate of 4.2 EUR (Prices may change due to market fluctuations)

Condition: excellent (used), Year of construction: 2005, saw blade diameter 360 / 400 / 425 mm cutting diameter 10 - 140 mm cutting speed 8 - 150 m/min required cooling water max. 40 l/min height of material-table 950 mm max. travel between columns 680 mm control Siemens Simatic total power requirement 28 kW Blsdpfsvzt Eqjx Afhjc weight of the machine ca. 4,2 t dimensions of the machine ca. 2,8 x 1,8 x 2,2 m

Condition: excellent (used), CATALOGUE NUMBER 7602 TECHNICAL SPECIFICATIONS - Sharpening speed: automatic - Cooling - Belt support arms - Grinding wheel size: 120 mm - Motor power: 0.17 kW, 400 V - Dimensions (L/W/H): 500x700x1200 mm - Weight: 120 kg ADVANTAGES – Made in Poland – Unpainted – Belt support arms – Used sharpening machine Bedpfsx U Ac Dsx Afhelc – Very good condition Net price: 4,900 PLN Net price: 1,160 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7547 TECHNICAL DATA Track width: 300 mm Roll working width: 290 mm Max. disc diameter: 300 mm Disc bore diameter: 70 mm Max. cutting height: 100 mm Table width with extension: 680 mm Table length: 1630 mm *From above: 2 rows of pawls Metal pressure slip roller Roller with saws 2 smooth metal pressure slip rollers From below: Guide rail Pawls Track Bodpfxex Uz T Uo Afholc Electric height adjustment of main body (up/down) Central track lubrication 2 feed speed modes Feed motor: 1.1 kW Main motor: 22 kW Extraction nozzle diameter: 130 mm Overall dimensions (L/W/H): 2000x1400x1700 mm Weight approx.: 900 kg – Italian manufacture – Very good condition – Used multi-blade saw Net price: 34,900 PLN Net price: 8,300 EUR (based on 4.2 EUR rate) (Prices may vary according to rate fluctuations)

Condition: excellent (used), Catalogue number: 7545 TECHNICAL DATA Track width: 250mm Shaft width: 220mm Max blade diameter: 300mm Blade bore diameter: 60mm Cutting height: 100mm Table width: 650mm Table length: 1460mm – Top: 2 rows of pawls Smooth feed roller Bledpfxex Uz Tuo Afhjc Blade shaft Smooth feed roller – Bottom: Guide rail Pawls Track 2 feed speed settings + stepless adjustment Central lubrication Feed motor: 1.2kW Main motor: 21kW Extraction outlet diameter: 180mm Overall dimensions (L/W/H): 1700x1450x1500mm Weight: approx. 1800kg – Made in Italy – DTR technical documentation – Robust machine – Used multi-blade saw, in very good condition Net price: 25,900 PLN Net price: 6,160 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: excellent (used), Catalogue number 7450 TECHNICAL DATA - Max diameter of workpieces: 140mm - Min diameter of workpieces: 30mm - Installed bushing diameter: 70mm - 2-knife head - Arbitrary length of workpieces - Motor: 4kW - Dimensions (L/W/H): 700x500x1100mm - Weight: 100kg Blodpfx Afsx Uz Skshjc ADVANTAGES – Incl. 70mm diameter bushing – Used bevelling machine – Very good condition – Used machine Net price: 5,900 PLN Net price: 1,400 EUR (depending on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: used, Double sawing saw Hüllhorst Type DH for bilateral, precise length cutting of timbers and boards. The machine enables rational operation through two opposing saw heads and precise length positioning. The machine is also equipped with dado/dovetail cutters for milling grooves for strapping bands in packaging cant logs = cant haws with groove. Bjdsycqigopfx Afhslc working width: 1.700 mm Saw blade Ø: 350 mm cutting length: 1.200 mm

Condition: excellent (used), Year of construction: 2021, For sale: Struers laboratory cut-off machine, model Discotom-100 FT 3x380-480V, year of manufacture 2021. The saw is in perfect condition, having operated for approximately 20 hours in our facility. Included in the set: a coolant tank with complete control equipment. Greater versatility and performance in one cut-off machine. Device description Bjdpfsyfxfhsx Afhslc Discotom highlights: • OptiFeed – intelligent feed control • AxioWash* – automatic cleaning system • ExciCut – designed for cutting extremely hard materials • MultiCut – serial cutting (enabling multiple sample preparation) • Method database • Cutting disc database The Discotom-10 and Discotom-100 are versatile benchtop cut-off machines, designed to economically expand your cutting capabilities and improve sample preparation processes. With a spacious and ergonomic design, both models offer exceptional flexibility for a wide range of clamping and cutting options for different sample types. This allows for efficient operation with less effort and minimal material deformation. Fast and precise State-of-the-art cutting technologies, such as intelligent speed adjustment, ensure exact and rapid cuts. Simply select the hardness of the material, and the machine automatically sets the optimal speed. Outstanding versatility If the disc becomes clogged with removed material, the user can select the automatic Direct Cutting mode with constant feed speed or the Impact Cutting mode. ExciCut manual mode is dedicated for separating harder and larger samples. The optional X-table automatic table unlocks the MultiCut function, allowing samples of identical or varying thickness to be cut precisely at specific positions. Time-saving operation The multifunctional rotary knob enables fast and easy setting of cutting parameters. Automatic speed setting not only saves time but also allows for using the same disc for various materials, eliminating the need for frequent disc changes. Swift switching between manual and automatic modes is supported by the motorized cutting arm lock, and a color display with icons provides a comprehensive overview of all essential information.

Condition: excellent (used), Catalogue number 7807 TECHNICAL SPECIFICATIONS - Track width: 350mm - Cutting width: 350mm - Blade diameter: from 355 to 505mm - Cutting height: 10-170mm - Spindle diameter: 80mm - Table dimensions: 1900x790mm - Height from base to table: 830mm From above: - 2 rows of pawls/kickers - 2 smooth, metal glide rollers - Shaft with saw blades - 2 pressure glide rollers From below: - Guide bar - Pawls/kickers - Track - Electric height adjustment of the body - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 4kW - Main motor: 75kW - Extractor spigot diameter: 2x150mm - Overall dimensions (L/W/H): 2050x1800x1800mm - Weight approx.: 3500kg FEATURES - German-made - DTR technical documentation - Used multi-blade saw Bsdpfx Afexvb Hzoholc - Very good condition Net price: 58,900 PLN Net price: 14,000 EUR depending on exchange rate 4.2 EUR (Prices may change due to stronger exchange rate fluctuations)

Year of construction: 2025, condition: new, XZ100228 Single head sawing machine Ø 400 mm for aluminium and PVC with manual blade down-feed and pneumatic vices FOM INDUSTIRE SIKA PLUS M Machine in stock Bedpfxopl Tgme Afhelc Configuration: - Aluminium and PVC cutting machine with CE certification - Tungsten carbide saw blade Ø 400 mm - Manual blade lowering (with lever) with pneumatic servo control to reduce operator stress - Side support plates on both sides - Blade motor power 2.2 kW - 2850 rpm - Self-braking motor with blade stop in less than 10 sec - Cutting angle from 45°Lh to 45°Rh on vertical axis and 45°Rh to 90° on horizontal axis - Intermediate angles with mechanical stop - Cylinder blocking involuntary head lowering - Double working pressure servo-controlled in low pressure - 1 pneumatic vertical vice - 2 pneumatic horizontal vices - 1 safety servo-valve for each pneumatic horizontal vice - Conical anti-crushing buffers - Worktable and turntable structure in stabilized cast iron - Motor transmission by belt - Saw blade holding spindle Ø 32 mm - Spray mist blade lubrication system - Integral blade guard in rest position - Set up for the extraction of chips and fumes

Condition: excellent (used), Catalogue number 7757 Bljdpfjx Tgtdjx Afhoc TECHNICAL DATA Milling machine - Spindle diameter: 25mm - Spindle height: 120mm - Interchangeable spindle, tiltable 20 degrees - Spindle locking - Height adjustable (up/down) - Original guide fence - Table dimensions: 1120x750mm - 4 spindle speed settings - Motor: 3.8 kW Circular saw - Max blade diameter: 350mm - Spindle axis: 30mm - Blade adjustable (up/down and angle) - Spindle locking - Cutting width at fence: 540mm - Cast iron table - Dimensions (L/W/H): 1260x900x1000mm - Weight: 610kg ADVANTAGES – Made in Poland – DTR documentation available – Used milling machine, very good condition Net price: 6900 PLN Net price: 1640 EUR (based on exchange rate 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2010, Sliding table length: 3700 mm Cutting width at rip fence: 850 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: manual Saw blade diameter: 400 mm Speeds: 4000 / 4800 / 6000 rpm Motor power: 7.5 kW, 400 V, 50 Hz Extraction connections: 80 and 120 mm INCLUDED: Laser cutting line indicator MITREX double mitre fence Machine dimensions approx. L x W x H = 3850 x 1650 x 1850 mm Weight approx. 1200 kg Note on used machines: • Errors in technical details and prior sale reserved. • Prices listed are ex-works prices – loading free of charge! • The machine has been cleaned and functionally tested. Blsdpfx Afsxzfqbehec • All machines are sold as inspected, with no claim to warranty. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1000x1500x1800 mm Weight 570 kg Total power requirement 3 kw Blodpfx Aov A Hgdefhjc