Used Sawing Line for sale (20,343)

Condition: new, NEBES TM 210 BELT SAW - Single-phase 230V Cast iron structure Adjustable cutting angle from 0° to 60° All cast-iron frame with large rapid vice and handwheel for clamping the workpiece Electric pump for blade lubrication and cooling Blade tensioning system with disc springs and oil-bath blade tensioning gauge to ensure constant tensioning Two cutting speeds and induction motor 0.03 mm accuracy on h 100 of cutting Cutting Capacity : 0° 45° 60° Fpjdpfoi Ezq Djx Ag Rsb Ø 185 mm Ø 120 mm Ø 60 mm 180×180 mm 100×100 mm 60×60 mm 200×140 mm 100×100 mm 60×60 mm Weight : Kg 179

Year of construction: 2011, condition: used, work piece width 60 mm Fpodpfx Agegvkcws Rob workpiece height 15 mm bore diameter 16 mm saw-blade dia. 350 mm workpiece length - max. 6.000 mm Roll lenght Einlauf 10.000 mm threading M12 total power requirement 15 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 12,0 x 2,0 x 2,3 m

Year of construction: 2006, condition: like new (used), The wafer and biscuit factory that benefits from a continuous, fully automated production process and has two main lines: wafers and biscuits. The wafer line has a capacity of 35-40 kg/h with a wafer weight of 45-55g and obtaining three quality types: 1. wafer weight = 45g/pc, cream layer = 1.25:1 – capacity –2.77 t/24h 2. wafer weight = 45g/pc, cream layer = 1.35:1 – capacity –2.89 t/24h 3. wafer weight = 45g/pc, cream layer = 1.50:1 – capacity –3.05 t/24h The line is equipped with a packaging machine and the collection and reuse of the scraps resulting from the cutting process is done automatically. The biscuit line has a capacity of 300 - 500 kg/h and three qualitative types can be obtained: 1. simple 2. sandwich 3. caramel 4. cocoa Fpedpfel Siv Sjx Ag Rob 5. glaze Simple biscuits can be: Strength = 300-400kg/h Soft = 400-500kg/h Crisps = 350-500kg/h The production is continuous, automatic, the line being equipped with a caramelizing device, sandwich, with 30 sets of shapes, chocolate coating device, including packaging and 5 temperature zones with independent, automatic temperature control.

Condition: ready for operation (used), PELLET LINE 3,5 TONS/HOUR Fpsdeg Sbbfepfx Ag Rjb

Condition: excellent (used), Catalogue number: 7817 TECHNICAL DATA DDCA - Double-End Tenoner - Minimum panel width: 180 mm - Maximum panel width: 850 mm - Minimum panel height: 10 mm - Maximum panel height: 45 mm - Spindle diameter: 30 mm - Maximum blade diameter: 250 mm - 4 blades included 5 spindles: Left side: 1) Top vertical spindle 2.2 kW 2) Bottom horizontal spindle 2.2 kW Right side: 1) Bottom vertical spindle 2.2 kW 2) Top vertical spindle 2.2 kW 3) Bottom horizontal spindle 2.2 kW - Spindles adjustable up/down and left/right - 2 material hold-downs - Stepless feed speed adjustment: 0–10 m/min - Central lubrication via oil pump - Pump motor: 2.2 kW - Extraction port diameter: 5 x 100 mm - Dimensions (LxWxH): 1900 x 2230 x 1530 mm DDGA - Four-Sided Planer - Maximum panel width: 130 mm - Panel height: 10–60 mm - Minimum workpiece length: 200 mm Spindle arrangement: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW - Spindles adjustable up/down - Top and bottom spindle diameter: 40 mm - Right and left spindle diameter: 30 mm - 4 feed speeds: 13/20/26/40 - Central chain lubrication via oil pump - Extraction port diameter: 4 x 120 mm - Dimensions (LxWxH): 3200 x 1370 x 1830 mm DBCA - Tenoner Infeed Conveyor - Maximum feed speed: 40 m/min - Maximum panel width: 150 mm - Motor: 0.55 kW - Overall dimensions (LxWxH): 2320 x 600 x 1150 mm DBGA - Strip Infeed Conveyor - Strip length: 200–600 mm - Strip width: 30–120 mm - Strip thickness: 10–40 mm - Stepless feed speed adjustment: 10–40 m/min - Motor: 0.75 kW - Overall dimensions (LxWxH): 1500 x 500 x 980 mm - Total weight: approx. 4900 kg – Polish production – DTR technical documentation included – 5 spindles – Unpainted – Very good condition – Used machine Net price: 63,900 PLN Net price: 15,200 EUR, according to the exchange rate of 4.2 EUR (Prices may vary according to exchange rate fluctuations) Fjdpfjxwytiex Ag Repb * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used purely for informational purposes to allow identification of the goods. We only resell items that have already been put on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: used, Used machine Equipment and technical data: - Double-sided line boring machine Fpedpfxewlwpge Ag Rjb - 2 drilling motors, each 1.8 kW, with oil brake cylinder - Stroke max. 130 mm - With pneumatic directional control valve - 21 spindles, spindle pitch 32 mm - Max. drilling distance 640 mm (by moving the workpiece up to 2656 mm) - Portal clearance 850 mm - Air consumption at 5 bar approx. 11 l per cycle - Extraction nozzle 160 mm Dimensions: approx. 3100 x 1100 x 1800 mm Weight: approx. 350 kg Availability: short-term Storage location: 63934 Röllbach

Condition: new, NEBES TM 275 Band Saw Machine - 400 v Three-phase NEW "CE" INDUCTION motor Cast iron structure Adjustable cutting angle from 0° to 60° All cast iron structure Electric pump for blade lubrication and cooling Oil-bath blade tensioning gauge Front controls and two cutting speeds Deviator for exclusion of coolant pump Blade guide with carbide skids (H.M.) Round cut 0° 220 mm Square cut 0° 200 x 200 mm Flat Cut 0° 230 x 185 mm Round cut 45° 150 mm Square cut 45° 150x150 mm Flat Cut 45° 150x200 mm Round Cut 60° 90 mm Square Cut 60° 90x90 mm Flat Cut 60° 90x120 mm HP 1.3 Voltage 400 V Blade size 2450 x 27 x 0.90 mm Fedpfxeh Nm Ncj Ag Rspb Weight 265 kg

Year of construction: 2011, condition: good (used), functionality: fully functional, Automatic bread slicing and packaging line. Fully operational, after service inspection. Used very little – mostly as a backup unit. Maximum capacity approx. 2,400 pcs/h. Fpsdox A E E Uopfx Ag Rsb

Condition: used, machine/vehicle number: 006500, Position 1: Vertical Storage Systems PRIESS-BMA DLS-CNC Position 2: CNC for Flexible Drilling PRIESS-BMA DLS-CNC Position 3: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC Position 4: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC Position 5: Brushing Machines PRIESS-BMA DLS-CNC Position 6: Roller Conveyors PRIESS-BMA DLS-CNC Fjdpjwucmvsfx Ag Rjpb

Year of construction: 2011, condition: excellent (used), This is a complete plant for house construction. Prices are listed with each item. Consisting of the following individual elements (see attached document as well): Photos will follow, they are already included in the attached document. Table 1 (Positioning and clamping of the frame structure) €34,500 - Elevating longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Fpsdpfju D Amgox Ag Reb Table 2 (Applying the first sheathing and fastening) €25,300 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 3 (Applying the second sheathing, fastening and turning the element onto the next table) €35,650 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Electrical installation and insulation) €34,500 - Cross conveyor with rollers and sheathing - Table traverse drive - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Applying the first sheathing and fastening the second side) €32,775 - Longitudinal conveyor with 3 hinge conveyors - Cross conveyor with rollers - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 6 (Applying the second sheathing and fastening) €28,750 - Longitudinal conveyor with 3 hinge conveyors - Pneumatic cross clamping - Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 - Longitudinal conveyor with 3 hinge conveyors - Hydraulic tilting unit - Table traverse mechanism - Upper guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 €13,800 (Applying the first layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 €13,800 (Applying the second layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 €13,800 (Applying the first layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 €13,800 (Applying the second layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Wall storage 1: 12 m long x 24 tracks €11,500 Wall storage 2: 12 m long x 20 tracks Vacuum lifter with column slewing crane €9,200 1 cross beam 2 t Abus €20,125 1 cross beam 2 t

Condition: excellent (used), CATALOG NUMBER 7816 TECHNICAL DATA DDCA - Maximum batten length: 85 mm - Minimum batten width: 180 mm - Maximum batten width: 845 mm - Minimum batten height: 10 mm - Maximum batten height: 45 mm - Spindle diameter: 30 mm - Maximum blade diameter: 250 mm - 5 spindles: - Left side: 1) Vertical top spindle 2.2 kW 2) Horizontal bottom spindle 2.2 kW - Right side: 1) Vertical bottom spindle 2.2 kW 2) Vertical top spindle 2.2 kW 3) Horizontal bottom spindle 2.2 kW - Spindles adjustable up/down, right/left - Material hold-down: 2 pcs - Stepless feed speed adjustment: 0–10 m/min - Spindle diameter: 5x100 mm - Dimensions (L/W/H): 1870/2230/1320 mm DDGA - Maximum batten width: 130 mm - Maximum batten height: 100 mm - Spindle arrangement: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW - Spindles adjustable up/down - 6-knife cutterheads mounted on top and bottom spindles - Spindle diameter: 40 mm - Shaper cutters mounted on right and left spindles, max diameter 50 mm - Spindle diameter: 30 mm - 2 feed speeds: 4.9 kW - Central chain lubrication by oil pump - Spindle diameter: 4x125 mm - Dimensions (L/W/H): 3100/1300/1700 mm ADVANTAGES - Manufactured in Poland - 5 spindles - Unpainted Fodpfxsxxxbne Ag Rjpb - Very good condition - Used production line - High quality, low price Net price: 52,900 PLN Net price: 12,600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2016, Sliding table 2800 mm, cutting width 1250 mm, controlled parallel fence, kappa 400 X, tilting saw unit 45°, saw blade diameter: 250 - 400 mm, max. cutting height: 133 mm, electric height adjustment, motor 5.5 kW, 3 speeds: 3500/4500/7500 rpm. X Motion screen control (touch function) at eye level, additional scoring function, easy-lock quick-change system for main saw blade. Location: Supplier Fpodoxta Dmspfx Ag Reb

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Functioning. Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut 3. the bow returns to the starting position 4. stop the belt motor Fsdpfxsfh R Tye Ag Rjpb 5. open the vice Possibility of manual cutting Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW

Condition: used, Year of construction: 2017, Overview This PET filling line was manufactured between 1998 - 2017 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 10.500 - 18.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data Capacity: 10.500 - 18.000 bph Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Kosme | 2017 Elevator preform | Kosme | 2017 Rinsing/Filling/Capping | Tekal | 50/70/12 | 1998 Inspection machine | Heuft | 2010 Date coder | Printer Laser | 2017 Labelling machine | Sidel | 2017 Packing machine | SMI | 2002 Palletizer | SIPA | 2011 Pallet stretcher | SIPA | 2011 Mixing- and carbonating unit | Adue | 2013 Beverage analyzer | Maselli UR21 | 2009 Conveyors for empty PET bottles | Silga | 2017 Conveyors for filled PET bottles | Silga | 1998                                                                                             Conveyors for trays | Silga | 1998 Fjdex Rrdcepfx Ag Repb

Condition: new, Year of construction: 2026, New slitting and cut-to-length with compact size decoiler. Machine modules: ✔ Decoiler up to 6000kg ✔ Side guides ✔ 5 roller straightener ✔ 5 slitter knives ✔ Polyurethane feed rollers ✔ Mechanical guillotine ✔ 7" Touch panel Machine parameters: • Dimensions L/W/H. - 3.3/1.5/1.2 m, weight 1700 kg • Sheet thickness (cut-to-length) : 0.5-1.2 mm • Sheet thickness (slitting): 0.5-0.8 mm • Max. coil weight: 6000kg Fedpfelgy Uhsx Ag Rjpb • Coil width : 500-1275 mm • Inner coil diameter: 460-520 mm • Steel, galvanized steel and coated steel up to 400N/mm2 • Accuracy : 1mm/2000mm • Power : 3.2 kW Optional: ◦ Additional decoiler ◦ additional slitter knives and guillotine knives ◦ Automaticaly adjustable straightener ◦ Automaticaly adjustable slitter

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2025, warranty duration: 12 months, input voltage: 400 V, DGUV certified until: 12/2026, total length: 700 mm, total width: 600 mm, total height: 850 mm, input frequency: 50 Hz, type of input current: three-phase, power: 6.7 kW (9.11 HP), electrical fuse: 16 A, Dishwasher Model: R-Line 1500 Quick-ready system Euronorm 500 2.4 liters of fresh water consumption 7 washing programs with 3 easy Rinse aid and detergent dosing pump extra deep interior for sheets / tubs 600 x 400 mm DGUV V3 checked Sequence / drain pump Connection: 400 V, 6.7 kW, 16A-CEE plug Dimensions: 600 x 700 x 850 mm, WxDxH with warranty Included accessories: 1 plate basket 1 universal basket 1 cutlery basket Inlet and outlet hoses Fpodpfxsfffhwe Ag Rjb

Year of construction: 1980, condition: used, work piece width 250 mm Fjdpfx Ajxyaghjg Rspb workpiece height 35 mm bore diameter 2 mm

Condition: good (used), Frequency converter, frequency inverter, drive inverter, controller, variable speed drive, single motor module, double motor module Manufacturer: Siemens, Sinamics Smart Line Module Fpsdpfx Aehzh Epsg Rob -Type: 6SL3130-6AE21-0AAO -Input: DC 600 V -Output: 3 AC 400 V 3 A/3 A -Dimensions: 480/50/H270 mm -Weight: 4.7 kg

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ready for delivery unless sold The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Fjdofibfajpfx Ag Rspb Adjustable stop for cuts of the same size 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Speed variator from

Year of construction: 2021, condition: excellent (used), Currently, the industrial line produces 2.2 to 2.5 tons per hour of high-quality pellets for heating from coniferous and deciduous wood. Waste material from other wood processing plants can also be used as raw material. Additionally, pellets can be produced from vegetable raw material for animal feed as an activity, as well as pellets from organic fertiliser for soil fertilisation. The company has been operating for 6 years and has two production lines. The equipment of one 1 ton/hour production has been in operation since 2013 and the second 2 ton/hour is new since 2019 and with proven production functionality. Fodpfsl Sny Asx Ag Ropb

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 98125446, saw blade diameter: 500 mm, cutting height (max.): 75 mm, positioning accuracy: 1 mm, cutting width (max.): 180 mm, CNC full optimization cross-cut sawline PAUL 11MKL for soft and hard wood. Line include : infeed conveyor with length 11525 mm, double side table for marking wood defects, measuring station with luminescence and light barrier for wood start and end detection, sawing station and outfeed conveyor 11500 mm sorting line with 5 side pushers to sorting table. Wood input length 2000-6000 mm Wood width 30-180 mm Wood thisckness 6-75 mm Min cross-section 30x15 mm or 45x6 mm Max cross-section 130x75 mm or 180x45 mm Saw blade diameter 500 mm Saw motor 5.5 kw , saw stroke pneumatic, saw cycles 0.4 sek Feed speed max 200 m/min Power consumption 11.4 kw Fpjdoxrr S Hjpfx Ag Rsb Control software CNC MAXI 5 Premium Line is in full working condition

Condition: good (used), Year of construction: 2016, functionality: fully functional, Topcoat line for leather, working width 1800 mm, with infrared dryer, air scrubber and chiller. Fpsdox S Er Nopfx Ag Rsb

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Adjustable stop for cuts of the same size Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Fsdpfxofibd To Ag Rspb Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium and large dimensions with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt control with inverter driven motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control. Accident prevention safety device on the fly cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Clamp jaw height 250 mm Jaw length 200 mm Worktop height 760 mm Machine weight 1250 kg 12260 N Fpjdpfx Aefh R Tueg Rob

Condition: new, Good brand new No. 1 available for immediate delivery! Warranty " CE " Made in Italy Cutting capacity : 0° = round tube mm 230 - square mm 220 - rectangle mm 170 x 300 45° = round tube mm 200 - square mm 180 - rectangle mm 180 x 230 60° = tubular round mm 130 - square mm 120 - rectangle mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Vice with rapid locking device Safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size Low voltage system 24 V Fpedpfxefibfgo Ag Rsb 0.06 kW electric pump for belt cooling The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied in order to avoid belt yielding, increase its life, improve linearity and cutting time.