Used Sawn for sale (74)

Condition: excellent (used), Band sawmill consisting of: - Tension carriage EWD EW 1000 - Band saw EWD EBB 1400 - Roller conveyor for transporting the sawn goods (manufacturer SPRINGER) - Raised cabin - Tracks - Control cabinets - Accessories Optionally with complete sharpening room equipment: - Sharpening machine Vollmer CAL 200 - Upsetting machine Vollmer PMH Chsdpfevtwzmjx Abzsd - Flanking (leveling) machine Vollmer EMS Log band saw EWD Esterer EBB1400 Vertical band saw for round wood Roll diameter: 1400 mm Roll width: 200 mm Saw blade width: 206 mm Saw blade thickness max. 1.47 mm Blade speed max. 55 m/s (winter & summer drive pulley available) Main motor: 55 kW The roller crowning was reground in 2009 Band saw carriage EWD Esterer EW1000 hydraulic tensioning carriage Year of manufacture 1991 4 tensioning blocks with 3 log turners tensioning block opening max. 1000 mm hook opening max. 930 mm total length: 6000 mm total width: 2450 mm total height: 1750 mm track width 1300 mm The band sawmill was bought second-hand in 2004/2005, reinstalled by Esterer, but never put into full operation as cutting is almost exclusively done with the gang saw. The band saw has only run for 500 operating hours since 2004! very good condition - available immediately - can be demonstrated by appointment Sharpening room equipment: 01. Vollmer CAL 200 sharpening machine Year of manufacture 2000 Tooth feed from the left CNC machine for grinding cutting and block band saw blades with straight grinding and wet grinding Full enclosure with extraction for CBN and corundum grinding wheels Incl. 2 Borazon grinding wheels 10mm 02. Vollmer PMH upsetting machine Saw upsetting machine for band saw blades Max. blade thickness 3.5 mm 03. Vollmer EMS flank/leveling machine Leveling machine for upset band saw blades converted to self-drive in combination with CAL 200 incl. limit switch on the saw clamping! Further details: The sharpening machines were purchased second-hand in 2007 and stored covered on pallets or wooden structures in a dry, heated garage. Because the band saw was never put into full operation, the sharpening room equipment was repeatedly postponed, so that today the machines are in the same condition as when they were delivered. All operating instructions, descriptions and circuit diagrams are neatly enclosed in a box. In 2018 and 2023 the machines were cleaned of surface dust outside, lightly oiled with graphite spray and stored in the garage again! immediately available - fully functional - very good condition Location: Austria, near St. Pölten

Condition: new, Year of construction: 2024, Customized paternoster stacking systems in different technical designs for sawn timber lengths from 3.0 - 6.0 m ( length on request ) options: Chodsr Nx Tmjpfx Abzod - with/without lath bundling (different versions depending on requirements) - with/without slat magazine single or double chamber depending on requirements with pneumatic gripper - Infeed and outfeed according to customer requirements

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Vertical top-drive saw FOD GKT 60 F with feeders and collection Machine in good technical condition after bearing replacement and service. New installation and electrical box Basic technical data: Horizontal clearance mm 600 Saw frame stroke mm approx. 400 Clearance between rollers mm 60-550 Csdowp Dqrjpfx Abzohd Smallest diameter of sawn logs mm 100 Largest diameter of sawn logs mm 500 Smallest length of sawn logs mm 2200 Main shaft rotation speed rpm 280 Feed per 1 revolution of the main shaft mm/1 rev. 5 - 20 Maximum number of saws pcs. 12 Main motor power kW 30 Feed motor power kW 2.2 Hydraulic unit motor power kW 2.2

Condition: new, Year of construction: 2025, the SQUALO 615 multi-blade or multi-blade circular saw with single shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. moreover it is 2-in-1 as it can be configured as a trimming machine with 1 or more movable blades. ideal for the production of strips, squares, sawn timber, profiles, edged planks, prisms, boards, elements for pallets. Codpshpbxijfx Abzohd Rollers / conveyor belt width 620 mm Width of infeed / outfeed conveyor rollers 620/720 mm Max saw unit width 590 mm Max cutting height (without pad) mm 150 (mm 125 Trimming machine) Min. Length working mm 800 Max width passage 800 mm Blades hole diameter mm 80 (mm 104 Trimming machine) Circular blades diameter 250/470 mm (480 mm Trimming machine) Blade shaft speed rpm 3.800 Variable feed speed with ROLLS 3 - 36 m / min Variable feed speed with CARPET m / min 4 - 25 optional: softstarter start

Condition: new, Year of construction: 2024, Board stacking system: Cedpstv E D Uofx Abzjhd Manufacturer: Stoiber GmbH Model: StoStack 5000 - layer stacking Year of construction: 2024 Condition: New Price & Location: Price on request AT - 4122 Arnreit Description: Universal board stacking system for efficient stacking of rough sawn boards, posts, battens and planed goods. Advantages of the system: - Fully automatic, flush stacking - Air gap stacking - Simple operation via touchscreen - No pneumatics, therefore unrestricted operation even in frosty conditions Technical data: - Flexible stacking width: up to 1200 mm - Stacking height: up to 1200 mm - Board length: from 1500 mm - Board/post width: 50 - 300 mm - Board/upright height: 15 - 120 mm - Maximum board/post weight: 75 kg - Maximum layer weight: 500 kg - Cycle rate: up to 25 pieces per minute Options: - Alignment rollers for longitudinal alignment of sawn timber - Ejector for ejecting faulty boards - Electrically adjustable side stands - Mobile machine frame: Use in several working positions by moving the machine on rails or with a forklift

Condition: ready for operation (used), Packing and stacking machine for sawn wood. Cjdpfx Absk T Aqwszshd Roller conveyor system to handle the ready made packages are also included in the delivery. The unit can be feeded with a belt conveyor also included or unscrambler ( not included )

Condition: new, - Fast cutting saw for solid material / profile up to 75mm - autom. loading magazine for bars up to 6300mm length and 3t weight - feed via ball screw - single stroke with 600mm - SIEMENS - electronics / drive / control Chedpfx Asggytqobzjd - good parts / first cuts are sorted - on request with conveyor unit for sawn parts - robot connection possible - incl. suction

Condition: new, Year of construction: 2023, SPECIAL PRICE - ONLY FOR A SHORT TIME!!! Chodpfx Abjh A H E Njzed This machine works with a unique double-cylinder system in this class, which guarantees an enormous strength of the saw arm. In addition, it has an extremely solid design and therefore meets the highest demands in steel construction. The design means that steel beams up to the maximum capacity (610 x 360 mm) can be sawn on both sides. The mitre adjustment is done effortlessly with one hand, the clamping is hydraulic. The saw blade speed is infinitely variable from 15 - 120 meters / minute. This makes the saw suitable for cutting both aluminum and tool steel. The working height is 860 mm. Technical data: Cutting ranges: 90° Round: 360 mm Square: 360 mm Rectangle: 510x360 mm + 45° Round: 360 mm Square: 360 mm Rectangle: 440x360 mm + 30° Round: 330 mm Square: 300 mm Rectangle: 300x360 mm - 45° Round: 360 mm Square: 360 mm Rectangle: 440 x 360 mm - 30° Round: 300 mm Square: 300 mm Rectangle: 300 x 300 mm Motor effective power: 3.0 kW Hydraulic motor: 0.55 kW Coolant pump motor: 0.12 kW Saw blade dimensions: 4800 x 34.0 x 1.1 mm Belt speed: 15 to 120 m / min infinitely variable Standard accessories: - miter adjustment on both sides up to 30° each - Hydraulic clamping of the miter adjustment - Mitre angle digitally readable on mobile control panel - Coolant system with coolant flushing of the saw blade in front of the blade guides - Infinitely variable adjustment of the band speed - Saw blade tension monitoring - User-friendly control panel - Hydraulic clamping vice - hydraulic unit - Rotating chip brush - manual, hydro-mechanical saw blade tensioning - German operating instructions, spare parts list, electrical diagram, hydraulic diagram - Two-tone paint finish: dark gray RAL 7021, yellow RAL 1003 - CE conformity - Micro-Cool cooling spray device complete with universal spray head

Year of construction: 2025, condition: new, functionality: fully functional, 1 new mobile Holtec KAPPSTAR HF122 package crosscut saw Cjdeh Imu Dopfx Abzohd robust all-rounder for sawn timber and logs for start / end and cross-cuts Package cross-sections up to 1.30 m x 1.30 m Log diameter up to 1.60 m Electric motor 11 KW STIHL pointed tooth chain for cross-cutting sawn timber or with STIHL planer tooth chain for cross-cutting logs Stellite guide bar on both sides (four-way reversible) Bar length: 1.90 m 400V, 50 Hz 1 year guarantee

Condition: new, Year of construction: 2024, The PIRANHA 310 Multi-blade or Multi-blade Circular Saw with single shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. ideal for the production of strips, squares, sawn timber, profiles, edged planks, prisms, boards, elements for pallets. Csdpshpbu Rsfx Abzjhd SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE

Condition: new, Year of construction: 2024, Aluminum circular saw UK 800 HA, semi-automatic The UK 800 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 800 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 800 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Cedpjidun Isfx Abzehd Please do not hesitate to contact us.

Condition: refurbished (used), AKE Log bandsaw groups with or without chipper canter unit We can offer different constellations of AKE Log bandsaw type 245 as below: Csdsiv Stijpfx Abzohd A. Bandsaw groups with 2 , 3 or 4 bands B. Bandsaw groups with 2 , 3 or 4 bands and chipper-canter unit. C. Complete sawline ( type SuperSaver ) Bandsaw groups with 2 , 3 or 4 bands and chipper-canter unit. Plus board edger unit. Capacity up 35000 m3 of ready sawn wood per year and single shift

Condition: excellent (used), functionality: fully functional, Frietsch SAWING MACHINES Buying and selling KASTO sawing machines Dear Sir or Madam, we buy and sell, rework and overhaul KASTO sawing machines. We have had experience with KASTO sawing machines for more than 40 years and have specialized in overhauling the machines. The machines are overhauled by specialist staff according to KASTO factory standards. We also look for KASTO sawing machines for machine overhaul according to your requirements. Good price-performance ratio through professional machine overhaul. Technical data KASTOtwin A 4 Dimensions of standard machine Length 2,294mm Width 2,460mm Height max. 1,915mm Total weight approx. 2,500kg Total drive power 7.0kW Drive power of frequency-controlled saw motor 4.0kW Cutting area in mm approx.: Cutting area Ø 400 mm Cutting area, flat (W x H) 400 x 400 mm Smallest dimension round Ø 10mm square, H x W 10mm Material feed length single max. 750mm Multiple feed 9,999mm Shortest cutting length 6mm Smallest diameter to be sawn 10mm Minimum remaining piece in single cut 15mm Shortest remaining piece length in automatic mode 100mm Cutting speed, infinitely variable 20 - 100m/min Saw blade dimensions Material support height 700mm Cutting feed: infinitely variable Material feed ball screw Belt tension Control CompactControl Chip pressure regulation 20 to 60 bar Belt slip monitoring Chsdegwaf Dopfx Abzsd Coolant device

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, cutting length (max.): 6,000 mm, cutting width (max.): 1,050 mm, Versatile HORIZONTAL SAWMILL, DOUBLE CUT / in WRC 1050 "VENEER" version AUTOMATIC CUTTING and specific of THIN VENEER SLATS • Frame length: 11M for 6.5M log length, possible extensions • DOUBLE CUT SAW HEAD with adjustable mobile pressure guides to hold the blade during cutting. • STATION & CONTROL SYSTEM SEPARATE from the saw bench TO BE POSITIONED ACCORDING TO THE PLAN TO BE DEFINED – on the existing site, open station with or without seat integrating the control system • 45KW MAIN MOTOR WITH FREQUENCY INVERTER option • WORM SCREW provided in each of the side pillars / or 2 worm screws / with or without FREQUENCY INVERTER for faster up and down movement and more precise • MORE POWERFUL HYDRAULIC GENERATOR ON THE CHASSIS: 18KW + 200L TANK + FREQUENCY INVERTER - so that the hydraulic equipment on the chassis moves faster • FastSmartCut CONTROL SYSTEM, SCHNEIDER 4.0 base, / WRAVOR PROGRAM / 2 joysticks + touch screen is encrypted instead of the initial standard PLC 1040 system • Automatic HANDS sawn timber thrust - including the GUILLOTINE option which is priced: vertical arm for DIFFICULT timber, for more SPEED • 1 CAMERA - 1 screen, additional cameras possible as an option • HYDROFOR COOLING SYSTEM • LUBRICATION SYSTEM - in ELECTRIC version or mechanical pump • 5 pairs of hydraulic SPINDLES, including the option with hydraulic cylinder • 5 hydraulic ROLLERS up/down movement • 3 NEW CENTERING DEVICES (not at 90° angle) new generation • 3 NEW LOG TURNERS, new generation, V system (cradle) • ELECTRICAL wiring: flat cables, cased in a chute • SILON BELT output belt, 4M, automatic up/down movement controlled from the control system • Sawdust EVACUATION system by ZIPPER: by capture (vacuum cleaner on the frame) as close as possible to the cutting blade and possible connection with the existing EBT suction circuit: completes the VENEER system, more powerful than the standard • The CABLE SAW head traction system, SEW Asynchronous system for greater speed and precision: optional Differences between the standard horizontal saw bench and the specific saw bench for veneer: the saw has the following adapted equipment: - a reinforced fairing at the head to prevent any intrusion of sawdust between the flywheel and the blade. - additional protective shields due to more powerful and voluminous sawdust extraction - double-cut blade Cedpfx Asvtqtvebzjhd - graphite blade guides (bakelite for the standard model) - special system for changing graphic blade guides - special protection of the chassis and sensors, plexi in the cover (different design of the saw head cover compared to the standard band saw) - additional sensors for blade deviation - pneumatic jet cleaning for the entire length of the saw bench OPTIONAL add-ons on request

Condition: new, Year of construction: 2024, The SQUALO 522 Multiblade or Double Shaft Multiblade Circular Saw is a technological machine, essential in a modern sawmill to optimize the production of sawn timber. Ideal for the production of strips, squares, sawn timber, profiles, trimmed boards, prisms, tablets, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE Double shaft multi-blade: Squalo 525 motor powers from 55 to 132 Kw Description Details Conveyor belt width mm 520/620 Width Conveyor rollers at the entrance mm 510 Width Conveyor rollers at the exit mm 610 Codpslz S Rbsfx Abzohd Max saw group width mm 500 Max cutting height mm 220 Min. Length of work mm 1000/1200 Max passage width mm 800 Blade shaft diameter mm 80 Max diameter circular blades mm 400 Blade hole diameter mm 100 Blade shaft speed rpm 3.800 Speed of advancement mt/min 3 – 60 Weight 9.500 – 10.500 Kg Overall dimensions mm 2720x2515x2105h

Condition: new, Year of construction: 2024, Aluminum circular saw UK 600 HA 90°, semi-automatic The semi-automatic circular saw UK 600 HA 90° is an "upcut" machine and is mainly used for cutting used for cutting profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and quick and quick and easy change of material. Only 90° cuts are possible with this machine! The saw feed takes place automatically at the touch of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes with a minimum lubrication system and an air spray gun for cleaning the machine as standard! Connections for a chip extraction system are available on this machine. Furthermore, this machine can be optionally equipped with a digital mitre angle display, a scribing laser and pneumatics for lifting the protective hood! be equipped! Equipment Large support table, powerful drive motor Two-button control for triggering the saw cut (optionally also available as one-button control) Clearly arranged control panel Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be moved backwards to increase the cutting cutting capacity can be moved to the rear Large protective hood covers the entire working area Minimum lubrication system with 2 liter reservoir Adjustable blade and cutting feed Air gun for cleaning the machine Saw blade ø 600 mm Work sequence 1. setting the cutting angle 2. inserting the material 3. adjusting the stroke speed 4. bring the clamping cylinder to within 20 mm of the material 5. clamp the material 6. press the The machine is ready for operation by pressing the start button. 7. press and hold the two SAW buttons, the material is sawn. 8. 8. at the end of the cycle, release both SAW buttons and press the STOP button 9. 9. open the vice and remove or push the material forward Technical data such as cutting range, power, etc. (see data sheet attached). Cjdpfspa Nxdex Abzohd Plantec Maschinen GmbH

Condition: used, Sawmill line with chipper canters and circular sawing machines. Capacity: Approx 50000 m3 of sawn wood per year and single shift. Min. log lengths 2.7 meter Max. log lengths 5.8 meter Min. log diameters 10 cm Max. log diamaters 65 cm Sawmill consist of below main parts: - Log intake with debarker - First sawing unit for logs wuth chipper canter and 2-blade log edger - Second sawing unit for blocks with chipper canter and 5-blade block edger - 2-blade board edger Cedpfx Aeviravebzshd - Chipping station for slabs.

Condition: as good as new (ex-display), Year of construction: 2024, cutting length (max.): 12,000 mm, cutting width (max.): 1,000 mm, Small horizontal saw bench WRAVOR WRC 1000, the smallest in the range, fixed: 1000mm diameter solid wheels for a cutting diameter of 1M, sawing length adaptable according to the possible extensions of the chassis: currently 8M (12M chassis) Hydraulic equipment (claws/rollers, centerers, log turners) and mechanical • 4 hydraulic loading arms attached to the chassis • 3 pairs of claws / space for 3 others possible as an option • hydraulic lifting of the log on clamps, with 2 mechanical rollers and 1 driven roller, with the possibility of adjusting the height Chjdpfx Abjvr Ez Eozjd • Hydraulic centerers (up/down movement): 4 • Mechanical supports: 3 • Hydraulic lifting rollers: 3 • 90° angle centerers up/down movement: 3 • Standard hydraulic turners: 2 • 40l hydraulic generator tank and 16l for the 4Kw pump • Overhead electric cable fixed on rail and rollers • Mechanical table for outputting wood (2.5M, possible in hydraulic, tilting, 4M, connected to the control station as an option) Control station currently separate from the saw bench, Basic control system, Wravor program, Joysticks and head sawdust suction system as options Hydraulic adjustment of the blade tension / Electric scoring saw / Hydraulic hand for pushing sawn wood / Right/Left blade guides: centralization of blade lubrication / Head movement (worm screw)... PV 45 blade, length 6390, width 110mm

Condition: reconditioned (used), Year of construction: 2018, The SQUALO 420 multi-blade or multi-blade circular saw with double shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. Ideal for the production of strips, squares, sawn timber, profiles, edged boards, prisms, boards, elements for pallets. SPECIAL PRICE, Chodpfehrdxisx Abzod OFFER OF THE MONTH UNBEATABLE PRICE

Condition: new, Year of construction: 2024, Aluminum circular saw BC 450 HA, semi-automatic (MG FRONT-450) The BC 450 HA is a double miter saw with a swivel range of 45° to the left and 22.5° to the right and an automatic mitre adjustment via stop functions. The saw stroke runs automatically and the material is clamped pneumatically. The saw blade (450 x 30 mm) runs horizontally. can also be optionally equipped with a digital mitre angle display, a scribing laser and pneumatics for lifting the protective hood! Equipment Double mitre machine with powerful drive motor Two-button control for triggering the saw cut (optionally also available as one-button control) Large mitre range from -22.5° to +45°, Swivel range 67.5° - 0° - 45° Automatic miter adjustment, fixed stop functions Chodpopa Nxaefx Abzod at -45° / 90° / +45° and two variable stop functions adjustable to the desired angle! Two horizontal pneumatic clamping cylinders Clearly arranged control panel Large protective hood covers the entire working area, is lifted pneumatically Adjustable blade and cutting feed Connections for extraction system Minimal lubrication system Air gun for cleaning the machine Saw blade ø 450 mm Work sequence 1. setting the cutting angle 2. inserting the material 3. adjusting the stroke speed 4. bring the clamping cylinder to within 20 mm of the material 5. clamp the material 6. press the The machine is ready for operation by pressing the start button. 7. press and hold the two SAW buttons, the material is sawn. 8. 8. at the end of the cycle, release both SAW buttons and press the STOP button 9. 9. open the clamping vice and remove or advance the material Plantec Maschinen GmbH

Condition: used, Board sorting line for both wet and dry sawn wood with 41 fall pockets and hydraulically operated bottom discharge. Capacity approx 50000 m3 of sawn wood per year and single shift Line consist of below main parts: - Intake for both dried/wet packages or directly from sawline. - Pocket section with overlaying conveyor for boards and bottom side conveyor. Chodjvirfrepfx Abzjd - Lumber stacker with automatic laying of sticks between the layers. - Press and strapping system for ready made packages - Chipping station for off cuts.

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, The SQUALO 420 multi-blade or multi-blade circular saw with double shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. Chsdpfx Aeu U Dkfsbzod Ideal for the production of strips, squares, sawn timber, profiles, edged boards, prisms, boards, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE

Condition: new, Year of construction: 2024, Aluminum circular saw UK 650 HA, semi-automatic The UK 650 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 650 Chedpsidun Djfx Abzjd HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 650 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2024, sawing system type "ORIX" Chsdpjfu Tgrjfx Abzod With the sawing system, a wide variety of aluminum profiles can be processed fully automatically. The machine consists of a stable base. Star guides and precision carriages are used to position the saw unit. The drives are equipped with servo motors. For sawing, the saw unit moves 300 mm forwards on the Y-axis and can easily saw special profiles, panels or Item and Bosch profiles. The support table consists of moveable rollers that are moved to the correct position depending on the section length. All rollers are also mounted on precision carriages. The saw also has a stable storage table on which the sawn-off aluminum parts are placed. (Optionally, the sawn parts can also be transported away directly via a conveyor belt, including the chips). The machine is available with a section length of 6,000 mm. It therefore has a total length of 7,000 mm. The sawing system is delivered with a suitable 2-channel minimum quantity spray system. In addition, the system will be delivered with a 400 or 600 saw blade.