Used Bridge Saw for sale (6,582)

Year of construction: 1994, condition: used, functionality: unexamined, We are selling a used, traditional bridge saw, type Zambon Rover 35, manufactured and installed in 1994. The machine is in excellent, freshly renovated condition, both mechanically and visually. The bridge consists of solid, heavy-duty cast iron and is mounted on two concrete support walls on sliding rails. The total weight of the machine with table is 5800 kg. Further technical data: saw blade motor 18.5 kW / 380V / 50Hz, two speeds 1460/2930 through belt drive, pivoting support 0-90° for miter cuts, carriage with 300 mm electric height adjustment, blade diameter 350 - max 800 mm, which allows a cutting depth of 18.5 cm, cutting length 3500 mm, bridge travel 4700 mm. The machine is programmed and operated via the pivoting and hydraulically vertically adjustable control panel and the switches installed in it, and via the 2-axis control system EM760.55. Up to 99 cutting widths can be programmed with repetition, a granite lowering automatic can be set, and there is a profile program. However, the machine can also be operated in manual mode without the automatic function. The feed of the carriage and the bridge is done by hydraulic drive, the bridge travel by handwheel with scale. We have all the documents for the machine, from the purchase to the operating instructions, as well as complete records of repairs and accessories, and the complete foundation plans. The machine includes a heavy-duty cast iron table 3500x200 mm, load-bearing up to 5 tons, with tiltable support frames with wooden cladding. The table can be rotated by hand and fixed at 90° and 45°, and can also be hydraulically raised by 500 mm. Podpfx As Aarlyeiregu The problem: 1) The machine has an electrical defect, which means that the carriage cannot be moved at the moment. The cause, which should not be major, must be found by the buyer. 2) The table is anchored to the ground with a cylinder up to about 2 m. This can be lifted out, but it will not stand on its own because of the tall cylinder. It is questionable whether the counterpart in the ground can still be removed. For this reason, and because of the costly effort involved in creating the foundation for the table, we recommend installing a different table. Terms of sale: The stated price is therefore only for the machine and does not include the table, but the table can be taken away free of charge. The machine is still assembled and can be inspected by arrangement, but cannot be demonstrated due to the described defect. The sale is ex works, and the buyer is responsible for organizing the disassembly and transport. Assistance can be provided during disassembly, and a crane is available for disassembly and loading.

Condition: ready for operation (used), Year of construction: 1995, machine/vehicle number: 060-8433, Cutting length: 3,500 mm Support carriage travel: 3,800 mm Bridge carriage travel: 3,500 mm Vertical adjustment: 400 mm Cutting wheel diameter: 625 mm Psdpfxozl Hhvj Airegu Maximum cutting depth: 210 mm Blade drive motor: 12 kW, 2 speeds: 950 and 1,450 rpm Rotary table Laser

Year of construction: 1994, condition: used, We offer this used F. Zambon Rover 35 bridge saw, year of construction 1994. Manufacturer: F. Zambon Model: Rover 35 Year of manufacture: 1994 Condition: used Category ID: 431 Type: Bridge saw Podpfxjyuuuds Airegu If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2018, operating hours: 3,758 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 5156, GMM rotating head bridge saw with vacuum separator Support travel distance: 3600 mm Support height adjustment: 700 mm Extension of bridge rails Y-axis to 5400 mm Maximum blade diameter: 825 mm for cutting depth approx. 300 mm Saw motor power: 23.5 kW Stepless speed control: 800 - 6000 rpm Tilting table with hydraulic tilt: 3500 mm x 2000 mm Table extension: 3500 mm x 430 mm Saw table with rubber table covering Removable table stops Vacuum lifter for automatic separation of workpieces Camera Automatic material measurement Automatic tool measurement Central lubrication Air conditioning GMM software including: - Milling Podjy Iu Rajpfx Airjgu - Drilling - Profiles - MiniCad - Cuts from CAD - Parametric shapes

Condition: good (used), Year of construction: 2014, functionality: fully functional, ELCON Automatic Multiwall Sheet Cutting Machine LANCET 215 For vertical and horizontal cutting of multiwall sheets Pedpfxjyymhuo Airjgu with a rigid blade! Technical Specifications: Cutting Height: 2,150 mm Cutting Length: 7,300 mm Cutting Depth: 50 mm Required Air Pressure: 6 bar Dimension setting for horizontal cuts: electronically adjustable via touchscreen Dimension setting for vertical cuts: via scale from 0–1,300 mm Feed rate: continuously adjustable from 0 to 60 m/min. Features: Solid, enclosed rear wall with felt support (new) Aluminum material support table Right-hand, pneumatically retractable material stop Pressure device for vertical cuts with adjustable pressure Lower pneumatic sheet clamping device per meter of cutting length Pneumatically retractable blade Pneumatically swiveling blade

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,500 mm, total width: 7,000 mm, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, feed rate X-axis: 60,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 20,000 m/min, spindle motor power: 17,000 W, Numerical control cutting centre with 4 interpolated axes, fixed worktable and twist head; the machine is specially engineered to cut/ shape (either in the plunge-cut or step-cut mode) items of granite, marble, engineered stone and suchlike. Pgsdpfx Aovtdztsirou

Year of construction: 1998, operating hours: 5,400 h, condition: good (used), functionality: fully functional, Sawblade –Ø: 500 - 1000 mm Cutting lenghts for saw blade – Ø 500 mm = 3400 mm Saw motor output: 18,5 KW 400 Volt, 50 Hz. Standard rot. speed: 1.000 / 1.450 U/min. Support: electrical vertical adjustment of saw blade; stroke ca. 550 mm Pgodeym Nzpepfx Airsu Support: electrically swivelling from 0°- 48°. Control: Electronic sequence - cutting control Automatic program: for soft and hard stones Operator panel : swiveling Folding bellows cover Bridge and cross guides Machine rotary table Size: 3400 x 1500 x 800 mm Table can be rotated manually through 360°, with fixed locking at 90° intervals, or individually in any position. Side stops can be folded down manually

Year of construction: 2013, condition: excellent (used), Robust and compact bridge saw with a fixed bridge for cutting stone tiles and slabs up to 800 mm in length: Special design of the support for maximum cutting precision; Water collection tray with built-in water circulation system for cooling the blade; Robust and compact construction. Roller conveyor at the front Roller conveyor at the rear Saw blade size: 350 mm Motor power: 2 kW Pgsdpfsi Akvvox Aireu Voltage: 230 volts Weight: 173 kg Mobile Location: in stock at warehouse 54634 Bitburg - immediately available -

Year of construction: 2009, condition: used, GMM rotating head bridge saw with 5 working axes. Automatic rotating support, 0-90°. Automatic rotating head, 0-370°. Psdpfx Aezz Nukoirogu Maximum blade diameter: 625 mm. Saw motor power: 23.5 kW. Tilting table with hydraulic tilt: 3500 mm x 2000 mm. Camera. 15″ Touchscreen. Laser.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 76020, travel distance X-axis: 3,800 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 320 mm, table width: 2,400 mm, table length: 3,800 mm, Breton Genya is the advanced cnc bridge saw for cutting marble, granite, quartz, ceramic, Lapitec slabs to create kitchen tops, vanity tops or claddings. The indicated price does not include disassembly and subsequent installation costs. Pjdpszrfadefx Airogu

Condition: used, Year of construction: 2008, functionality: fully functional, manual in images. This is a 5 head horizontal Band Saw. It has tilting heads making it ideal for Feather Edge board production. It has 18KW motors. Pgedpfjzwh Rcox Airsu This machine comes with its own saw sharpening equipment and 10 new blades. All power feed wheels have been replaced with new. It runs on 30mm blades. All new power feed sprockets and fully DC braked.

Condition: new, functionality: fully functional, overall weight: 12,000 kg, total length: 8,100 mm, total width: 6,080 mm, total height: 5,500 mm, feed rate X-axis: 45 m/min, feed rate Y-axis: 45 m/min, feed rate Z-axis: 15 m/min, sheet thickness (max.): 140 mm, table length: 3,650 mm, table width: 2,150 mm, SPECIAL PRICE Breton Combi is the cnc bridge saw with waterjet for cutting marble, granite, quartz, ceramic, Lapitec slabs to create kitchen top, vanity tops and claddings Price from €uro 250.000 Pgodpfxotynfgj Aireu

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Pedpfxjyh Hc Rs Airegu

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type Pjdefv Hphspfx Airogu to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Semi- automatic 82- 250 FPM Variable speed control Pgodowxmhljpfx Airju Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: used, Vesto saw with two discs for sale - electric motor: 2 x 7.5 kW, - complete with hydrostation, Pedstqt T Iopfx Airjgu - electrical cabinet.

Condition: used, Year of construction: 1970, saw blade diameter 300 mm Pgodpfxs Agcllo Aireu turning speeds 17,5/35 U/min

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Pgedpfx Aisd H Hmhsrju Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: good (used), Year of construction: 1976, functionality: fully functional, Cold circular saw with automatic feeder Year of manufacture: approx. 1976 Equipment: - Standard accessories - Automatic feeder, cutting length 1700 mm - Various saw blades - Coolant system - Infeed roller conveyor 2400 mm, split (2 x 1200 mm) Podpfx Aswtdi Aeirjgu - Outfeed roller conveyor 500 mm - Documentation Condition: good, workshop tested

Condition: used, Year of construction: 1984, Table length: 3200 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 2800 mm Cutting depth: 145 Scoring saw: no Saw blade height adjustment: manual / hydraulic Saw blade swivel adjustment: manual / hydraulic Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: Speeds: 4 Motor power: 5.5 kW Motor brake: yes Dust extraction connection: 80 mm and 120 mm Machine length: 3000 mm Psdpfx Ae Af Hmpsiregu Machine width: 1700 mm Weight: 1000 kg

Condition: repair required (used), MZ Project LC 5000 – longitudinal cutting saw Cutting length: 2000 mm Pedpfxe Af Uu Ro Airogu Machine intended for spare parts.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, length of the outfeed table: 980 mm length of the infeed table: 980 mm table width: 170 mm maximum blade size: 300 mm minimum blade size: 295 mm diameter of the blade mounting hole: 30 mm integrated dust extraction system Pjdpo Afwzbjfx Airsgu adjustable cutting head angle: -45 to +45 degrees motor power: 1.2 kW adjustable height of the upper table upper table dimensions: 400x300 mm CE marking year of manufacture: 2006

Condition: used, Year of construction: 1980, functionality: fully functional, E. Gilett – bevel cutting saw No machine plate available Pgsdpfx Ao Afm S Esirju Wheel diameter: 1200 mm Wheel width: 140 mm Motor power: 37 kW

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 232597, functionality: fully functional, cutting height (max.): 320 mm, overall weight: 2,100 kg, controller model: Siemens Simatic HMI, throat depth: 370 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from November 16, 2026, to November 26, 2026! TECHNICAL DETAILS Belt length: 5,080 mm Belt speed: 250–2,000 m/min Maximum cutting height: 320 mm Overhang: 370 mm Guide rod, hydraulic lift: 200 mm Belt tension, hydraulic lift: 60 mm Material support height: 1,200 mm Roller diameter: 630 mm MACHINE DETAILS Control: Siemens Simatic HMI Pgodpfx Aoz Ilvzjirju Operating voltage: 400 V Rated current: 32 A Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,500 x 2,700 mm Weight: 2,100 kg EQUIPMENT Roller conveyor (roller conveyor width: 350 mm) External reference: Heraeus

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: AY11051, functionality: fully functional, cutting height (max.): 330 mm, overall weight: 1,500 kg, saw band length: 5,385 mm, saw band width: 100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS SAWING AREA Sawing direction: Vertical. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sawing direction: Vertical Cut to feed roller: max. 230 mm Cut to stop: max. 260 mm Cut width to column: max. 300 mm Total opening: max. 480 mm Cutting height: max. 330 mm Saw band width: max. 100 mm Saw band length: min. 5,385 mm Saw band length: max. 5,485 mm Saw band thickness: min. 0.8 mm Saw band thickness: max. 1 mm Wheel diameter: 915 mm Table width: 1,010 mm Table length: 740 mm Pjdpfe Af Hk Ujx Airsgu Feed roller type: Manual Dust extraction port diameter: 150 mm MACHINE DETAILS Main motor power: 15 kW Connected power: 15 kW Voltage: 400 V Current consumption: 28 A Fuse rating: 32 A DIMENSIONS & WEIGHT Dimensions (L x W x H): 2,000 x 950 x 2,400 mm Weight: 1,500 kg EQUIPMENT CE marking Max. cut to feed roller: 230 mm Max. cut to stop: 260 mm Max. cut width to column: 300 mm Max. total opening: 480 mm Max. cutting height: 330 mm SAW BAND Max. saw band width: 100 mm Min. saw band length: 5,385 mm Max. saw band length: 5,485 mm Min. saw band thickness: 0.8 mm Max. saw band thickness: 1 mm TABLE AND WHEELS Wheel diameter: 915 mm Table width: 1,010 mm Table length: 740 mm FEEDING AND DUST EXTRACTION Feed roller type: Manual Dust extraction port diameter: 150 mm MACHINE DETAILS GENERAL Year of manufacture: 2002 Color: Blue Serial number: AY11051 CE marking: Yes ELECTRICS AND DRIVE Main motor power: 15 kW Connected power: 15 kW Voltage: 400 V Current consumption: 28 A Fuse rating: 32 A DIMENSIONS AND WEIGHT Overall length: 2,000 mm Overall width: 950 mm Overall height: 2,400 mm Weight: 1,500 kg