Used Scheer Db 5 for sale (67)

Condition: used, Cutting length: 3050 mm Workpiece clamping: handwheel Bledpfx Aksm H Uxyj Hsg Extraction system: yes

Condition: used, Cutting length: 3000 mm Cutting height: adjustable 0 - 45 mm Saw unit: 1.8 kW Storage location: Nattheim Bljdjy Hrzaopfx Ak Heg

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Bedpfx Aovvkazok Hslg Storage location: Nattheim

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Storage location: Nattheim Bedpfevvkbljx Ak Hjlg

Condition: used, Year of construction: 1975, Number of spindles: 20 Drill spacing: 32 mm Power consumption: 1.8 kW Bledpfoy E Hfkjx Ak Hsg

Condition: excellent (used), functionality: fully functional, Kitchen Worktop Milling Device FG 314-2 - Equipped with HM /18 Scheer router - Milling length: 900 mm - Milling depth: 0–90 mm Bsdex R Efgopfx Ak Hjlg - Complete with template - Weight: approx. 21 kg - 2000 Watts - 7 kg torque - 10,000 – 18,000 rpm Transport available at additional cost!

Condition: good (used), functionality: fully functional, 2.5 HP motor, max. cutting height approx. 45 mm, saw blade diameter approx. 180 mm, depth to fence approx. 500-530 mm, fitted with extraction unit, rear fence table, support consoles/support table, pneumatic pressure bar / workpiece clamping, ex location. Shipping available at extra cost! Bodpeyu Sl Tefx Ak Holg

Condition: new, functionality: fully functional, Cutting rotor for a strand pelletizer Manufacturer: MAAG / Scheer Blsdpspgulwofx Ak Hsg - Cutting rotor width: 200 mm - Excellent condition

Condition: ready for operation (used), functionality: fully functional, FM 10-3100 A, horizontal veneer and panel saw, ideal for precise longitudinal cuts on veneer stacks, chipboard, MDF, and thin solid wood. Features fully automatic feed and return of the saw carriage. Feed rate, saw blade height, and cutting lengths are continuously adjustable. Equipped with pneumatic special pressure beam, front and rear support tables HP 520. Allows both longitudinal and cross cuts in a single operation. Three-phase brake motor 6.8 HP / 5 kW and scoring unit. Efficient dust extraction. Maximum cutting height 60 mm, cutting length 3,100 mm. In good condition; machine is ready for immediate use. For further technical details, please refer to the PDF (brochure). Located in Neustadt/Weinstr. Transport available at extra cost! Bodpfxoyzxkwj Ak Hslg

Condition: excellent (used), Year of construction: 1986, Scheer circular cutting system Stable base frame Portal design allows workpiece to pass through Fully automatic control with skip function Height-adjustable drilling unit Cutting diameter: Min: 70 mm Max: 305 mm Bljdpfjyy St Asx Ak Heg Depth: Max. 40 mm Up to 2 panels per cut Central bore: 7–10 mm Possible center bore: 15–35 mm Drill motor BM 602 Machine cycle times: Beech: diameter 220 mm, depth 40 mm – 40 sec Plywood: diameter 220 mm, depth 40 mm – 20 sec Chipboard: diameter 350 mm, with bore D: 35 mm – 30 sec Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 2008, condition: good (used), functionality: fully functional, Used strand granulator Year of manufacture: 2008 Bedpfxshfmrte Ak Helg Scheer SGS 100-E4 Condition: good, functional tested Available immediately

Condition: used, Used machine Equipment: Bljdoyncpiepfx Ak Heg - Cutting length 2500 mm - With handwheel tensioning Availability: short-term Stock location: 63934 Röllbach

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Bjdpfxjyxr T Tj Ak Holg Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: used, Year of construction: 1992, Cutting length: 3100 mm Bjdeyl Tiuspfx Ak Holg Workpiece clamping: pneumatic

Condition: good (used), Year of construction: 1980, Cutting length 3100 mm Cutting height 45 mm Motor output 1,8 kW Bledpfx Ajyku U Nsk Hsg machine weight ab. 500 kg

Condition: good (used), Year of construction: 1984, functionality: fully functional, Veneer Saw Scheer FM8-3100 Year of manufacture: 1984 Pneumatic tensioning Cutting length: 3100 mm Bledpeyvg D Uefx Ak Hog Max. cutting height: 45 mm Dimensions: 3.8 x 0.7 x 1.15 m Weight: approx. 400 kg

Condition: used, machine/vehicle number: 650597, Motor 1,65 kW cutting length approx. 2450 mm saw blade diameter approx. 150 mm pneumatic tension space requirement approx. LxWxH mm 3000 x 1000 x 1600 Blsdpfx Akjimd D Ao Hjg ex location Seevetal, subject to prior sale, sold as seen, without transport

Condition: used, Number of boring spindles 1 St. Motor output 1,1 kW Workpiece thickness ca. 100 mm Blodolfcnwspfx Ak Heg Working width 650 mm Foot-operated drill machine Scheer type BM340

Condition: ready for operation (used), A panel dividing saw Scheer & Cie is available. Cutting length: 4200mm, fence depth: 4250mm, table length: 4200mm, max. cutting height: 70mm, height levels: 3, feed rate: 40m/min, return speed: 50m/min, angular pressure device: 2400mm, air cushion tables: 3, air cushion table dimensions X/Y: 1720mm/800mm, clamping fingers: 7, saw motor power: 9kW, control: Siemens PLC, system: Linux Ubuntu with graphical interface. Including adjustable scoring saw, residual cut device, safety devices, remote maintenance, optimization program Optimax and freely adjustable labels that are printed during sawing. Documentation available. An on site inspection is possible. Blsdpfxjyq R E Rs Ak Hsg

Condition: ready for operation (used), Year of construction: 1989, cutting length (max.): 3,100 mm, Pneumatic pressure beam; rear stop Blsdpfx Akjyn Nr De Hog

Condition: used, Veneer saw, veneer saw machine, jointing machine, fine cutting machine, fine cutting circular saw, Veneer saw drive motor -Veneer saw: SF Scheer drive motor EM 21 -Drive: 1.6 kW 2820 rpm -Dimensions: 265/270/H255 mm -Weight: 24 kg Bljdpfx Akjh Elzto Hjg

Condition: used, Year of construction: 1991, Cutting length 3100 mm Cutting height 45 mm Motor output 1,8 kW Blsdpfxsr I E Hce Ak Heg dimensions 4000 x 500 x 920 mm weight 450 kg

Condition: good (used), Spindles, machining unit, automatic drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Max. feed rate: Stroke 60 mm -Drive: 1.1 kW Bjdpfx Asb A Iiaok Helg -Recording: 10 x 17 mm -Number: 2x quill processing units available Price: per piece -Weight: 25 kg/piece

Condition: good (used), Veneer saw, veneer sawing machine, jointing cutting machine, fine cutting machine, fine cutting circular saw Blsdpjb A Hnhsfx Ak Hog -Cutting length: 3000 mm -with extraction

Condition: used, Year of construction: 1982, Used machine Condition: good Equipment and technical details: Cutting length mm: 3,100 Cutting height mm: 45 Saw blade diameter mm: 180 Depth to stop mm: 500 Bodow I Ulpjpfx Ak Holg Main motor kW: 1.8 Pneumatic clamps Rear stop Weight approx. kg: 400 Location: Flörsheim Availability: short notice