Used Balancer for sale (857)

Condition: new, Balance Systems Digital Interface Balancer 9SHVM2512B N220 Card SNo. B803704, unused, 100% functional, scope of delivery as per photos Codji D T Dgspfx Aiajgu

Year of construction: 2010, condition: used, Technical details: range of revolution per miute: 180 U/min voltage: 220/ 50 V/Hz machine weight approx.: 150 kg dimension machine xH: 1,2 x 0,8 x 1,3 m total power requirement: 550 kW Car tire balancing machine The balancing process is automatic with wheel braking. Program selection can be chosen between 11 balancing methods. Microprocessor controlled LED display with digital weight display. Center hole of rim Ø 40 - 154mm Shafts Ø 36mm Measuring speed 120 rpm. Measuring time 5 - 10 sec. Cone sizes: Ø 44 - 63mm; Ø 61 - 79mm; Ø 77 - 114mm; Ø 107 - 154mm Cgedeu Ic Aiopfx Aiaju Wheel dimension: Rim width: 1,5" - 18" RimØ max. 10" - 24" Wheel Ø max. 890mm Wheel weight max. 65kg *

Year of construction: 1987, condition: good (used), functionality: fully functional, machine/vehicle number: RMUW2258, Horizontal balancing machine, manufacturer: SCHENK, type: H30, year of manufacture: 1987, serial number: AHE1070, rotor weight: 3-320 kg, rotor diameter: max. 1,260 mm, journal diameter: 10-160 mm, speed infinitely adjustable. Cgsdpfx Aoy S Tynoiasu Control system: CAB 820, year of manufacture: 2021, serial number: RMUW2258.

Condition: used, Microbalance, Laboratory Balance, Precision Balance, Analytical Balance, Scale, Micro Balance METTLER TOLEDO Model XS3DU S/N 1129453969 Part No. 18.11.2.1518.756-1 Year of Manufacture: 2008 Functions: Weighing, Statistics, Formulation, Density, Percentage Weighing, Piece Counting Maximum Capacity: 3.1 g Readability: 0.01 mg Taring Range: 0 … 3.1 g Maximum Capacity (Fine Range): 800 mg Readability (Fine Range): 0.001 mg Repeatability (at nominal load): 6 μg (3 g) Repeatability (fine range at nominal load): 0.8 μg (0.2 g) Linearity Deviation: 10 μg (0.5 g) Corner Load Deviation (test load): 4 μg (1 g) Sensitivity Deviation (test weight): 45 μg (3 g) Temperature Drift of Sensitivity: 0.0001 %/°C Sensitivity Stability: 0.0001 %/a Repeatability (low load): 3 μg (0.2 g) Repeatability, fine range (low load): 0.5 μg (0.2 g) Linearity Deviation: 3 μg (3 g) Corner Load Deviation (test load): 1.2 μg Sensitivity Deviation (test weight): 9 μg (3 g) Minimum Sample Weight (USP): 6 mg Minimum Sample Weight (USP) fine range: 1 mg Minimum Sample Weight (U = 1%, k = 2): 0.6 mg Minimum Sample Weight (U = 1%, k = 2) fine range: 0.1 mg Stabilization Time: 6 s Stabilization Time (fine range): 10 s Interface Update Rate: 23 1/s Cgsdswrtbxopfx Aiaju Draft Shield Diameter: 68 mm Draft Shield Usable Height: 55 mm Weigh Pan Diameter: 25 mm - LCD Touchscreen - RS232C Interface - Printer Type RS-P42 - Tare Function Power Supply: Primary 100 – 240 V AC, 50/60 Hz; Secondary 12 V DC, 2.5 A Terminal/Display Unit Dimensions (L x W x H): 285 x 195 x 80 mm Weighing Cell Dimensions (L x W x H): 288 x 128 x 114 mm Printer Dimensions (L x W x H): 210 x 150 x 90 mm Total Weight: approx. 7 kg Good condition

Condition: ready for operation (used), Year of construction: 2007, Immediately available ex location: CNC Vertical Balancing Machine TIRA Type KV 10 Year of manufacture: 2007 Rotor mass: 1 – 10 kg Rotor height up to 400 mm Rotor diameter up to 400 mm Max. balancing speed up to 2000 rpm Max. display sensitivity (gmm): 0.5 Drive power: 2.2 kW Weight: 1500 kg Codpfszap Txjx Aiaegu Price: EUR 4,500—plus VAT ex location.

Condition: used, Reading type / 0 weight - pallet system / kg length / mm Cgsdpfsy Sur Eox Aiaou

Condition: good (used), functionality: fully functional, Manufacturer: HOFMANN Type: NG-1 Cgsdpfx Aiozada Toaeu Machine No.: 922472 Max. disc diameter: 320 mm Max. loading weight: 20 kg

Condition: used, Year of construction: 2001, functionality: unexamined, load capacity: 600 kg, Dalmec MXF Ceiling Balancer-Manipulator Cjdpov Diidjfx Aiaogu Manufacturer: Dalmec lifting systems Model: Dalmec MXF Manufactured: 2001 Lift capacity: 600 Kg Pressure: 0.90 MPa

Condition: used, This listing is for Sartorius MSE 3601S Balance. The unit is in full working condition and ready for immediate use. High-performance precision weighing. Power-On Verified. The Sartorius Cubis MSE 3601S is a premium laboratory balance designed for fast, highly accurate weighing workflows. It features a clear digital display, robust build quality, and a user-friendly interface. Perfect for demanding laboratory, research, and quality control environments. Csdezauxmspfx Aiaegu Transparency Report and Technical Audit: • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, workpiece weight . kg workpiece length . mm diameter . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Cgsdpey Swhvjfx Aiasu possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, This listing is for the Sartorius MSA225S + YDP10 Analytical Balance/Printer The unit is in full working condition and is ready for immediate use This premium laboratory weighing system features a Cubis analytical balance paired with a dedicated printer. It delivers ultra-precise measurements and instant documentation for compliance-driven environments. Ideal for advanced research, pharmaceutical dosing, and quality control applications. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Codpjxv Du Ijfx Aiaegu • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) [[1]()] Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. [[1](), [2]()] Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, Year of construction: 1998, workpiece weight 150 kg workpiece length 2500 mm diameter 160 - mm balancing speed variable 100 - 3000 U/min dia. axle journal 160 - 350 mm voltage 400 V total power requirement 1,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 7,50 x 1,30 x 1,60 m Control 0,60 x 0,60 x 1,85 m Software TIRA X9000 Operating System Windows XP Software update 2007 Serial No.: R 32/98 Max display sensivitiy: 0.5 gmm Balancing speed 100 - 3000 RPM Csdpfswcg Elex Aiasgu

Condition: new, Year of construction: 2025, A compact design sheet fiber laser metal cutting machine with complete protection Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. Codpfohwmdrex Aiajgu The pu Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W, 12000W Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, This listing is for the Sartorius Tare CP4202S Top Loading Balance + YDP20 Printer The units are in full working condition and are ready for immediate use Csdeygmikepfx Aiaogu The Sartorius Tare CP4202S is a high-precision top loading balance designed for routine laboratory weighing applications. Known for its reliability and durability, it delivers accurate and repeatable results, making it ideal for research, quality control, and industrial labs. The balance features fast stabilization time, intuitive operation, and a robust construction suited for daily use. With Sartorius’ trusted weighing technology, the CP4202S ensures consistent performance, ease of calibration, and dependable results for a wide range of weighing tasks.

Condition: used, This listing is for the Sartorius Cubis MSE20201S Balance + YDP30 Printer The unit is in full working condition and is ready for immediate use A high-capacity laboratory balance designed for accurate weighing of larger samples, typically used in labs, industrial settings, production environments or quality control applications. Typical Use Weighing large containers, batches of raw materials, or intermediate products Integrating into lab information systems Feeding weight data to printers, LIMS, or control software Codpfxsy Iw Die Aiaegu The Sartorius YDP30 is a compact laboratory thermal printer designed primarily to work with Sartorius balances and other lab instruments. It’s built for accurate, compliant printouts of measurement data, labels, and reports in regulated environments like quality-control, research, and industrial labs

Condition: used, Year of construction: 1983, Schenck M480-1/450 High-Precision Dynamic Horizontal Balancing Machine with CAB 690 Control (1983) Cgsdpfx Aioy Dr Unsaju Speed Range 20-5,000rpm. Maximum Rotor Weight 450kg. Asset No.10_627. S/No. AHG 0459 (1983). Description With Interlocked Guards & 2 Roller Steady Supports.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: RFVD 0018, Used fully fuctional Schenck RoTec Distec Balancing Machine The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Technical data: - Max. rotor diameter: 500 mm - Max. rotor height: 150 mm - Max rotor weight: 30 kg (option for 70 kg) - Countinuously variable balancing speed: 600-1000 1/min - Measurement uncertainty: 4 gmm - CAB 870 touchscreen operation - Automatic drilling unit - Weight approx: 2200 kg Codpeyxwmlofx Aiaegu - Space requirement approx: W1200 x D2700 x H1900 mm

Condition: new, Dynamic Hard-bearing Balancing Machines of the 9D716 series have originally been designed to meet the needs of a wide range of customers. They are undoubtedly the best solution if you need to balance a wide range of rotor types, weights and sizes. This has led to their use in a wide range of industries. The machines have many unique technical solutions that allow you to set up and balance complex rotors in the shortest possible time without losing the accuracy of the unbalance detection. MACHINE HIGHLIGHTS • The specially designed rollers use advanced patented Exact Barrel grinding technology and are mounted on precision bearings. • The monolithic design of the supports and base eliminates vibration losses during balancing by reducing the number of "oscillating system" elements. • Allows large initial unbalances to be measured without destroying the machine, and rotor unbalance to be corrected directly on the machine. • The low natural resonance frequency of the supports allows the rotor to be balanced at low speeds. • The width of the support rollers and roller block allows the installation of rotors with very short rotor bearing journals. The modular design allows rotors with unusual configurations to be mounted using spacers or tools. • The height of the roller block is adjustable, allowing rotors with different journal diameters to be balanced and the rotor to be centred during machine set-up. • The unique "Micro-Tuning" technology eliminates the effects of axial slippage during rotation. • The belt drive has a patented "long stroke" design that allows any rotor to be rotated using only two drive belts. • The frequency converter drive provides smooth acceleration and deceleration of the electric motor and infinitely variable speed control of the rotor. MACHINE DESIGN OPTIONS • Axial drive that uses a cardan shaft. Capable of transmitting high torque from the electric motor to the rotor. This type of drive is used for parts with high aerodynamic resistance or special design features (e.g. augers). • Drilling module for unbalance correction of the rotor without removing it from the machine. Convenient to use to increase the productivity of the operation. • Extended machine bed. The base of the machine can be made for any length of rotor. In our practice we have had machines for rotors of 12 metres in length. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • The maximum sensitivity of the machine at any moment of operation, the set-up and calibration of the machine is carried out by the operator himself. • Free from the influence of external vibration factors on the measurement result, it has a high degree of protection against various types of interference. • World-leading functionality and accuracy. SPECIFICATIONS Weight range of balanced rotors 5 - 500 kg Maximum rotor diameter (above the bedding) 1300 mm Diameter of rotor support journals 30 - 180 mm Distance between centres of rotor support journals 200 – 2000 mm Support type Rollers Transmission element for rotor rotation Belt / Cardan Minimum achievable residual specific unbalance 0.4 g.mm/kg Rotor speed range 300 – 1500 rpm Electric motor power 4.0 kW Cgjden Hwqvjpfx Aiaju Parameters of the supply network 380V, 3 Ph, 50Hz

Condition: new, The 9D717 balancing machine is a versatile and reliable tool for balancing a wide range of rotors from 15 to 1500 kg. This machine is capable of balancing different types of rotors, including inboard and outboard cantilever rotors, rotors on special mandrels and rotors in their own bearings. The machine's design is simple yet functional, allowing it to easily balance armatures, generator rotors, impellers and fan wheels, even with large initial imbalances. In addition, the machine can balance rotors in their own bearings, saving repair time and preventing damage to the rotor trunnions. It is suitable for determining and eliminating unbalance on rotors of electric motors, metallurgical gears, screws and printing equipment. The 9D717 balancing machine is also capable of balancing disc-type parts such as impellers and smoke pump impellers, as well as correcting unbalance on shaft-type parts such as threshing drums and combine rotors. Overall, this machine is highly versatile and effective in balancing various types of rotors, making it ideal for repair and production shops. HIGHLIGHTS • The specially designed rollers use advanced patented “Exact Barrel” grinding technology and are mounted on precision bearings. • The monolithic design of the supports and base eliminates vibration losses during balancing by reducing the number of "oscillating system" elements. • Allows large initial unbalances to be measured without destroying the machine, and rotor unbalance to be corrected directly on the machine. • The low natural resonance frequency of the supports allows the rotor to be balanced at low speeds. • The width of the support rollers and roller block allows the installation of rotors with very short rotor bearing journals. The modular design allows rotors with unusual configurations to be mounted using spacers or tools. • The height of the roller block is adjustable, allowing rotors with different journal diameters to be balanced. • The belt drive has a patented "Long stroke" design that allows any rotor to be rotated using only two drive belts. • The frequency converter drive provides smooth acceleration and deceleration of the electric motor and infinitely variable speed control of the rotor. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • The maximum sensitivity of the machine at any moment of operation, the set-up and calibration of the machine is carried out by the operator himself. • Free from the influence of external vibration factors on the measurement result, it has a high degree of protection against various types of interference. • Easy to learn working skills and maintenance for any employee. SPECIFICATIONS Weight range of balanced rotors 15 - 1500 kg Maximum rotor diameter (above the bedding) 1800 mm Distance between centres of rotor supports 360 – 3000 mm Support type Rollers Transmission element for rotor rotation Belt / Cardan Minimum achievable residual specific unbalance 0.4 g*mm/kg Cedpjpdpn Ujfx Aiajgu Rotor speed range 300 – 1500 rpm Electric motor power 7.5 kW Parameters of the supply network 380V, 3 Ph, 50Hz Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Condition: used, This listing is for a Sartorius MSA124S Balance The unit is in full working condition and is ready for immediate release. The MSA124S is part of the Sartorius “Cubis” series of analytical balances, which are modular, high-performance instruments designed for milligram-level weighing. Very fine resolution / readability: it supports a readability of 0.1 mg (0.0001 g) in many configurations. Weighing capacity: around 120 g (for the “124” model) in the typical configuration. Excellent repeatability and linearity: e.g., repeatability ≤ ±0.1 mg, linearity ≤ ±0.2 mg. High-end interface and connectivity: E.g., Ethernet, USB, RS-232, optional Bluetooth; also SD-card reader for data transfer. Advanced ergonomic features: tiltable and removable display/control unit, motorised draft shield (in certain variants) to minimise environmental influences. Compliant with GLP/GMP/laboratory traceability requirements: audit trails, user profiles, leveling assistance etc in higher-end configurations Because of its high precision and fine resolution, the MSA124S is best suited for: Analytical laboratories performing gravimetric measurements, chemical/ pharmaceutical labs, material science labs. Applications where small sample masses must be weighed accurately (e.g., formulations, dosing, microparticles). Environments requiring audit-trail/logging, connectivity, and data export (e.g., regulated labs). Cgedsxuqmnopfx Aiaju Use cases where drift/offset must be minimised and environmental effects (drafts, vibrations, static) must be managed.

Year of construction: 1990, condition: excellent (used), 1 piece mass balancer for creel. With complete accessories and attachments. Cgjdpfx Aiofm Ev Rjasu Little been in use.

Condition: used, functionality: unexamined, For sale: knife balancer Net price: 230 Euro/unit We have 6 units available Cgodpfxjyutmlo Aiasu

Condition: new, workpiece weight (max.): 10 kg, rotor diameter: 250 mm, High-Precision Vertical Balancing Machine for Disk-Type Rotors up to 10kg The 97V10 is a versatile vertical balancing machine designed to efficiently balance disk-type rotors without their own bearing surfaces. Ideal for serial, small-scale, and single-piece production, it ensures optimal performance and reliability of your products. HIGHLIGHTS • High Accuracy: Delivers precise unbalance measurement with an accuracy of at least 4 g∙mm/kg. • Versatile Design: Accommodates a wide range of disk-type rotors, including: - Discs of various designs - Pulleys and flywheels - Fan impellers - Brake discs and drums - Couplings - Pump impellers - Cutting tools • Efficient Operation: - Vertical axis of rotation for quick part replacement and easy access. - Semi-automatic mode for streamlined operation. - Protective covers and compliance with CE and ISO safety standards. • Flexible Configuration: - Customizable with drilling or milling modules for in-situ unbalance correction. - Available with various spindle fits (cylindrical or tapered) and mandrels. - Options for pneumatic or manual collet chucks and hydraulic jacks for heavy workpieces. SPECIFICATIONS Weight range of balanced rotors 0.1 - 10 kg Maximum rotor diameter 250 mm Maximum rotor height 150 mm Minimum achievable residual specific unbalance 4 g*mm/kg Number of measurable rotor correction planes 1 & 2 Cedpsu U Nqdefx Aiasgu Rotor speed range 300 – 1500 rpm Electric motor power 1.0 kW Parameters of the supply network 380V, 3 Ph, 50Hz For more information and to discuss your specific balancing needs, please contact our sales team. We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Condition: new, VSR turbocharger high-speed balancing machine SBR-10 SBR-10 professional specialised equipment for high-speed balancing of assembled turbo cartridges. Equally useful for car and truck turbocharger. The machine was designed for entry level turbocharger repair workshop, including medium re-manufacturers. It solves a wide range of tasks that repair centres face on a daily basis. The SBR-10 simulates the same testing and balancing conditions as the turbocharger on the vehicle, this allows the quality of the repair to be guaranteed. It also allows checking turbocharger for oil leakage. A well-balanced turbocharger has a long service life which reduces the return rate of turbochargers and helps to build up your reputation. HIGHLIGHTS Mounting the cartridges on their standard surfaces (as on the engine) allows the installation of almost all turbochargers. Wide range of accessories and adapters for installing any kind of turbos Includes adapters for installing turbochargers with lower oil inlet and reverse rotation turbines Oil system with oil heating allows to recreate similar conditions to the real one during balancing. The turbocharger rotation and measurement is automatic. The cycle includes acceleration to maximum speed, measurement during the cycle, and air shutdown. Emergency shutdown is provided in case of extreme vibration increase, which prevents cartridge destruction even in case of assembly errors Automatic cycle allows to carry out vibration measurement in a short and sufficient period of time. Vibration measurement of the turbocharger housing - up to a value of 10G, which 2 times better than other analogs. KEY FEATURES • car and truck turbocharger balancing • Any turbocharger installation • All type turbocharger adapters • Reverse rotation adapters • Balancing speed up to 300 000 rpm • Fast oil heater and temperature regulation • 3-stage oil filtration • Real-time unbalance measurement • Automatic cycle turbocharger balancing • An industrial fanless touch screen pc control system • Access to self-editing of the data base • Creation and printing of reports on turbocharger balancing SPECIFICATIONS Maximum compressor wheel diameter 120 mm Maximum rotation speed 300 000 rpm Pneumatic system operating pressure 0,8 – 1,0 MPa Minimum air receiver volume 1000 L Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1120 х 780 х 1274 mm Weight 285 kg Cgedponfvmhefx Aiasu We manufacture fuul range turbo repair equipment. Please contact us to get more info! 👇

Condition: new, Cardan shaft balancing machine BVI-03-74 Available in stock in Poland !!! Delivery time: one day!!! . . Machine for driveshafts weighing up to 150kg and up to 4700mm long. Suitable for small workshops with a large range of different shafts, including trucks. This balancing machine has high productivity and serves to balance the cardan shafts of cars and trucks. It makes the process of balancing the cardan shaft easy thanks to many technical solutions, while the machine has an affordable price, which reduces your financial burden and allows you to develop your business effectively. . . TWO TIMES faster than your machine. Cgedpfopbv Tfox Aiasu This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . . HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 4700mm, weight up to 150kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Soft-bearing type machine - high sensitivity to any vibration • Machine is operated by one worker • Sliding bearing supports - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 150 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 4700 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2000 rpm Power supply 380V, 3 Ph, 50Hz Power, minimum, 2,2 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 700 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!