Used School Maschine for sale (1,955)

Condition: used, mileage: 1,800 km, first registration: 04/2020, overall weight: 9,000 kg, axle configuration: 2 axles, These front-mounted sweepers can be operated via the front PTO shaft. Of course, we can also accommodate your specific requirements, special requests, and additional optional equipment. The brush shafts are equipped as standard with alternating plastic and wave wire discs to achieve the best possible sweeping performance, even with heavy and stubborn dirt. ? Dücker FKM 2400 ? With municipal mounting plate receiver ? Implement plate size 3 and 5 ? Very little use, always stored in a shed ? Working width 0°. 2,400 mm ? Working width 15° 2,300 mm ? Working width 30° 2,075 mm ? Sweeper roller diameter: 600 mm ? Hydraulically raise/lower ? Hydraulically swivel right/left ? 2x water tank Csdpfx Ajz Ta Rxoarjhd ? Water spray ? Support wheels ? Support Manufactured with a stable, torsion-resistant housing with double-walled construction. The sweeping roller is suspended and adjustable in height, with stepless adjustment, and consists of disc brushes in plastic/wave wire, 600 mm Ø, with heavy-duty wheels 250 mm Ø directly attached to the housing. Working width: 2.4 m Overall width: 2.65 m Sweeper roller diameter: 600 mm Lifting device for front quick-change system: Implement plate size 3 or 5, including cylinder Drive, hydraulic, minimum oil flow at 180 bar: 40 l/min Weight: 580 kg Additionally with: Hydraulic tilting of the brush right/left Water spray device in front of the brush Boundary lights LED and warning flags Changeover valve, electric Financing is possible through our partner banks; we will gladly assist you. We expressly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. Information on accessories is without guarantee. Subject to change, prior sale, or errors. We strongly recommend and encourage an inspection and examination so that the buyer does not have any false expectations regarding the condition and suitability. Inspections and examinations are possible at any time by prior arrangement and are expressly desired.

Condition: used, Year of construction: 2022, mileage: 48,256 km, power: 80 kW (108.77 HP), first registration: 12/2022, overall weight: 6,000 kg, fuel type: diesel, color: blue, next inspection (TÜV): 01/2027, gearing type: automatic, total length: 4,110 mm, total width: 1,330 mm, total height: 2,090 mm, number of seats: 2, Equipment: air conditioning, Vehicle No.: 311-26 2 units available!!! HAKO Citymaster 2250 Sweeper * First registration: 12/2022 * Mileage: 48,256 km * Operating hours: 5,367 h * Steel bristles * Automatic transmission * Air conditioning * Unladen weight: 3,778 kg * All-wheel steering can be engaged * German machine Inspection is possible at any time during our opening hours, test drive by appointment! For export sales, a deposit will be retained, which will be refunded upon receipt of the proof of delivery. Company logos or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the function of the extras. All information without guarantee – errors, changes, typos and prior sale reserved. Vehicle descriptions are explicitly not guaranteed characteristics. Csdpfo Ahz Rzex Aarjhd We refer to our general terms and conditions and ask that you take note of them.

Condition: new, Year of construction: 2025, Two tables are connected via a tandem system to achieve a combined load capacity of 5000 kg. Technical description with the following key data: Load capacity: 3000 kg static line load Useful stroke: 800 mm Overall height: 240 mm Total height: 1040 mm Platform length: 1300 mm Platform width: 1000 mm Material: Smooth sheet metal Lifting time: approx. 18 sec. for the full useful stroke Lowering time: load-dependent Electrical connection: 3 x 400 V/50 Hz + protective earth, with 16 A CEE plug and 3-meter cable Motor: 2.2 kW, 1400 rpm Valve voltage: 24 V DC Protection rating: IP 54 generally, solenoid valve and switch IP 65 Paint finish: Steel blue RAL 5011 Chodpfek E Hmtjx Aared Unit placement: integrated in the lifting table Control box: Dead man's control including 2 m cable Total weight: approx. 330 kg Tandem control for synchronized operation. Note: No guarantee can be given for 100% synchronous operation. Any height differences that may occur will be compensated for in the base position or upper position. The safety cut-out strips of the two lifting tables are NOT interlocked. Minimum distance: 500 mm between the lifting tables. Maximum distance: 3000 mm between the lifting tables. Self-supporting base frame with 4 flanged wheels, into which the lifting table is installed. 4 ball-bearing flanged wheels, wheel diameter 150/175, heavy-duty design for maximum load, made of turned steel C45. Overall height: + approx. 50 mm.

Condition: new, Year of construction: 2025, - Mobile scissor lift table with sturdy platform upper frame and a bolted-on workbench top - Lifting up/down is operated via a hydraulic foot pump - Load capacity: 350 kg - Base height: 540 mm - Usable lift: 610 mm - Maximum height: 1150 mm - Stable platform upper frame, 970 x 590 mm, located beneath the workbench top - Robust lifting scissor construction with finger guards - Total weight: approx. 160 kg - Steering castors: 2 with brake, 2 without brake - Wheel diameter: 125 mm - Each narrow side features 2 integrated support feet with rotating footplate and rubberized foot surface, allowing the lift table to be used as either a stationary or mobile work station - Powder-coated finish: base frame and platform frame in light grey RAL 7035, scissor elements in violet blue RAL 5000 * Includes widened foot lever for easy operation with the workbench top installed even when the lift table is fully lowered Product data — Workbench: Workbench made of solid beech (50 mm thick), load capacity 200 kg on the workbench Front vice approx. 520 x 70 mm Front and rear vices equipped with spindles ensuring highly precise and stable clamping jaw guidance Rear vice and workbench top equipped with holes for bench dogs Front edge of the workbench top is 130 mm high Workbench drawer runs along the entire rear length for tool storage, includes 4 matching round bench dogs Usable top length: 1,490 mm Usable top width: 620 mm Overall length: 1,700 mm Overall width: 790 mm Workbench top thickness: 50 mm Front edge of bench top: 130 mm high Chodpfxerr Twmj Aarod Weight of workbench top: approx. 90 kg

Condition: used, Year of construction: 1993, pressing force: 160 t, Press brake used Make: BBM Model: AP ME 160-40 year of construction 1993 Pressure capacity 160 to. folding length 4050 mm Table width 190 mm Stroke 250 mm throat 315 mm Equipment CNC control Swivel operation at the front right CNC backgauge (X-axis) CNC electric depth adjustment Manually adjustable stop fingers adjustable table crowning, by crank Chsdpfxotufbne Aarod Rear and side guards 3 front support arms Double foot switch Accessories: 2 Multi-V-matrices as well as 1 brand. Deer foot stamp

Condition: new, Year of construction: 2026, functionality: fully functional, Labeling system for round and square canisters Stainless steel frame 170 mm wide link chain (optionally wider possible) Standard label width 140 mm or 190 mm, optionally up to 260 mm possible Label length 300 mm, optionally longer Dispensing speed up to 30 m/min., optionally 50 m/min Product diameter according to technical testing from 20 mm - 170 mm, optionally other sizes possible Touch screen display, with storage option Label dispenser with three-dimensional adjustment option Product separation with two-sided belts Product alignment for square bottles Top belt guide for square and oval products Other labeling options, such as lid labeling, seal labeling, bottom labeling, etc. Codju Ia E Ispfx Aarohd

Condition: used, functionality: fully functional, overall weight: 210 kg, Year of construction: 2006, machine/vehicle number: 31006, Construction machinery technology: mounting plate for hydraulic breaker Chodpfx Aasyxgfdjred

Condition: ready for operation (used), * Brand: RN Maschinenbau * Surface: length 5500 mm, width 2100 mm - 2 decks * Screen opening upperdeck: [] 18 mm. * Screen opening lowerdeck: [] 8 mm. * Driving: 30 kW E-motor Cjdjywmpmepfx Aarehd * Incl.: springs.

Year of construction: 2025, condition: excellent (used), Separator TSP.155 The separator features five shafts, providing more space within the unit for the material to be loosened along the running/rotational direction of the shafts. The shafts are arranged in the housing at a 15° angle to each other, creating a progressive rounding effect as material is guided into self-rotation even before full engagement. This results in a significantly higher throughput and improved material quality compared to units with fewer shafts. Shafts BS252 Equipped are BS252 block disc shafts designed to break up very wet and stubbornly compacted soils, crush clods of earth, and efficiently mix additives such as lime or compound binders at high throughput rates. With this configuration, the Terra-Star enables soil processing long after other equipment would need to be withdrawn from use. For excavators from 27 tons Chedpfxjyvrzxe Aarod Weight in kg: 2700 Throughput: up to 120 m³/h Leak oil line required: 1 Series: 252

Condition: used, functionality: limited functionality, gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 20,000 kg, number of seats: 1, first registration: 01/1992, Year of construction: 1992, machine/vehicle number: 20412, Equipment: additional headlights, cabin, parking heater, We offer this used Mannesmann Demag V 73 mobile crane, year of manufacture 1992. Cedpfx Aaoyi D Dderehd Type: V 73 Chassis number: 20 412 Year of first commissioning: 1992 Permissible total weight: 20,000 kg Permissible front axle load: 10,000 kg Maximum lifting capacity: 14 t Maximum outreach: 13 m Last inspection: 2023 The load moment limiter is not operational. If you have any questions or require further information, please feel free to send us a message.

Year of construction: 2023, condition: used, Wolf bucket separator TSP.124 is designed for tough continuous operation on construction sites, storage yards, or landfills. The bearings are maintenance-free, and the chain casings contain fluid grease, which is distributed to all areas by the movement of the bucket and the running chain, ensuring constant lubrication. Therefore, the Terra-Star never needs to be relubricated and is maintenance-free. The machine is equipped with M80X mixing shafts, and the tools are hardfaced with armored wire in the wear zones. An OQ70/55 adapter is installed, although other adapters can also be mounted. Combined use with excavators and wheel loaders is possible without difficulty. The adapter is not included in the price. Cjdpjyf Aqnofx Aarehd For excavators from 18 t For wheel loaders from 10 t Weight in kg: 1850 Throughput: 52 - 77 m³ / h Leak oil connection required: 1 Series: TSP.124.096

Year of construction: 2025, condition: used, Separator Terra-Star TSC.134 used, year 2025 Maintenance-free, screening line 0-20/25 mm, star discs TA 15mm Star discs armored Application with screening shafts: Separation of stones, branches, roots, turf, debris, etc. from still usable waste soil. Also works with moist soil. Mixing in compost, sand, substrate, etc. in one operation during screening is easily possible. Screening of topsoil, construction debris, gravel. Refilling of construction pits and cable trenches, etc. Cjdpfx Aaoyf Arxerohd Shafts for other grain sizes or tasks can also be installed—ask us for details. Fitted with OQ65 Price is without adapter plate For excavators from 12 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 50 m³/h Required leakage oil connection: 2 Series: TSC.134.012

Year of construction: 2025, condition: used, List price €34,000 Breaking up, crushing, mixing particle size 0-60/80 mm For soil conditioning, mixing in lime, stabilizing agents, sand, compost, and other soils. Chodpfxeyf Ar Ss Aared Crushing and breaking up soil clods, separating stones, branches, roots, etc. Particle size 0-60/80 mm Aerating, crushing, shredding, turning biomass, organic waste, and compost For lime application, we also offer a binder spreader in our range, available with weighing system. The separator comes from a short-term rental and shows minimal signs of use. Price without adapter. The surcharge for the lightly used OQ70/55 is €4,250 For excavators from 16 t For wheel loaders from 8.5 t Throughput: up to approx. 65 m³/h Drain oil connection required: 1 Series: TSC.154.326

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500 mm, the machine delivers an enormous throughput with its 4 shafts! Mixing in lime or binding agents to dry soil, blending with compost, sand, other soils, etc., while simultaneously crushing soil clumps. Aerating, shredding, tearing, turning biomass, organic waste, and compost, while simultaneously separating branches, roots, etc. that cannot be crushed. Crushing easily breakable stones in construction debris such as pumice, bricks, Poroton blocks, while simultaneously separating the chunks. Larger and harder parts remain in the separator. Feeding lumpy soil to a screening plant reduces waste and increases throughput. Price without adapter! For excavators from 24 t For wheel loaders from 13 t Weight in kg: 2300 Throughput: 64 - 95 m³/h Leak oil connection required: 1 Cedpfx Aaeyf Au Hjrshd Series: TSP.154.128

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500 mm, this machine delivers enormous throughput thanks to its 4 shafts! Mixing in lime or mixed binders for soil drying, blending with compost, sand, other soil types, etc., with simultaneous crushing of soil clods. Aerating, shredding, tearing, and turning biomass, organic waste, and compost, while simultaneously separating out branches, roots, etc., that cannot be shredded. Crushing brittle rocks in construction debris such as pumice, bricks, Poroton, while simultaneously separating the fragments by size; larger and harder pieces remain in the separator. Feeding clumped soil into a screening plant reduces waste and increases throughput. Price without adapter! Chedpfx Ajyf Avdsarsd Suitable for excavators from 24 t For wheel loaders from 13 t Weight (kg): 2300 Throughput: 64 - 95 m³/h Leakage oil connection required: 1 Series: TSP.154.132

Year of construction: 2018, condition: used, The separator is from a well-known customer who has vacated the storage area where it was previously in use. With the installed screening discs, you achieve a grain size of 0-45/50 mm. Mixing in of additives is also possible in the same operation. The separator breaks up clods of soil and separates stones, roots, and branches from the reusable soil. When used as a feeder for a screening plant, performance increases by approximately 30% and waste/screen overflow is reduced by 60%, as the clods are already broken up. Other shafts can also be installed in the separator at any time. Conversion time: 40-60 min (patented shaft coupling) New prices: Mixing shafts M80X, grain size 0-60/80 mm: €10,567 Mixing shafts with block disc BS252, grain size 0-45/60 mm: €14,066 Used units, if available, correspondingly cheaper. An overflow plate is installed to prevent soil from spilling onto the wheel loader and to increase capacity by about 1/3. Included in the price is also the adapter for Volvo L50-120 type wheel loaders. Further technical information can be found in the datasheet in the images or on our website. For wheel loaders from 15 t Chodpfx Aaoyf A Erered Weight (kg): 3450 Drain line required: 1 Series: TSP.263.001

Condition: used, Year of construction: 2006, operating hours: 100 h, functionality: fully functional, Profi Industrial Cutting System (Longitudinal/Cross) – Grossmann – ONLY 100 operating hours! Description: For sale is a high-precision, automated longitudinal and cross-cutting machine from quality manufacturer Grossmann Maschinenbau. The system has a total runtime of no more than 100 operating hours. It is therefore in an almost mint technical condition and shows hardly any signs of wear on the mechanical components. Originally designed for cutting chip mats, this machine’s robust construction and versatile PLC control make it suitable for a wide range of materials (e.g. rubber, cork, fleece, composites, films, textiles, etc.). Technical highlights & features: Condition: Nearly new (max. 100 operating hours). Chedpfx Aaeylxmfjrjd Format: Maximum cut length 2,500 mm x maximum working width 1,200 mm. Complete line: Includes professional unwinder and winder for fully automatic material flow from roll to roll or roll to format. PLC control: Professionally programmed, with a choice between manual and automatic operation. Material handling: Automatic gripper feed positions material precisely in the end position, with integrated edge removal system for perfectly clean edges. Operation: Intuitive control via display, foot switch, and optical/acoustic production completion indicators (traffic light/horn). Precision: Integrated laser for exact material alignment. Safety: Fully enclosed design and modern safety monitoring. Versatility: This machine is a true all-rounder for any rolled material that needs to be cut to precise sheet sizes or strips. Its stable construction with a high-quality aluminum profile system ensures maximum rigidity. Complete documentation available, including process protocol, wiring diagrams, and technical drawings. The machine can be inspected and tested under power by appointment. For exact technical details and questions about fields of application, please feel free to contact me personally. Contact: Phone: 05427 9423 20

Condition: used, Year of construction: 2017, Blast Cabinet with Extraction System Blast Cabinet: Manufacturer: SGT Strahlmaschinen AG Model: SX-100 / DK / 4P Extraction System: Chodpfx Aoyddufearjd Manufacturer: Gläsner Plant No.: 5V 3028 055 Voltage: 400 V Frequency: 50 Hz Power: 2.2 kW The blast cabinet is sold together with the extraction system. Purchasing individual components separately is not possible. Inspection is available by appointment.

Year of construction: 2026, condition: like new (used), Binder dispenser / lime spreader, used for a short-term rental. The dispenser features an integrated weighing system with display; the 18V battery system is from Makita and is thus independent of any external power source. An OilQuick 70/55 adapter plate is installed but can be changed if required. Feel free to contact me with any questions. Best regards, Jürgen Wolf. Suitable for excavators from 15 t. Required drain line: 0. Chedpfx Aeyupynjarjd

Year of construction: 2025, condition: like new (used), Medium screening 0-20/25 mm The installed screening shaft with a disc spacing of 15 mm is the most popular and frequently purchased screening line. Suitable for screening topsoil/humus, with smaller stones of -20/25 mm included in the fraction. The stones maintain soil permeability and stability, reducing moss formation. Mixing in compost, sand, or substrate turns dirt into new revenue. Disc spacing 15 mm – in a single operation with screening – works excellently with a Terra-Star. Screen fraction: 0-20/25 mm Wheel loader mounting is installed but not included in the price. On request, we supply the separator with adapters for excavators and wheel loaders. For excavators from 4t For wheel loaders from 3t No leakage oil connection necessary Cedpfx Aeyfwbzoarohd Series: TSE.083.210

Year of construction: 2024, condition: like new (used), The separator is designed for screening topsoil / humus. With the Terra-Star, screening and blending of compost, sand, or other materials can be accomplished in a single operation. The four shafts provide impressive throughput in screening and mixing. The shafts are equipped with star discs made from wear-resistant HX 500. In case of wear, re-welding can be performed at any time. Chodpfx Ajya Uuzearsd The Terra-Star is a modern system designed to give you a foundation for future adaptation, today. Changing to other carrier machines is always possible, as all connections are bolted. Converting the shafts for different applications is also feasible at any time—from screening shafts to mixing shafts or other combinations. Required adapters for excavators or wheel loaders are available from us upon request. For excavators from 2.2 t For wheel loaders from 1.8 t Weight in kg: 250 Throughput: 6-8 m³/h No leakage oil connection required Series: TSE.054.087

Condition: new, Year of construction: 2025, operating hours: 30 h, Panel benders (also known as swing bending machines or folding machines for sheet metal) are used across various industries where precise, automated bending of sheet metal components is required. The main sectors include: 🏭 Metalworking & Sheet Metal Processing Contract manufacturers / Sheet metal processing companies Series and single-part production Enclosures, housings, cassettes, boxes 🚗 Automotive Industry & Suppliers Structural and body components Brackets, covers, interior components Especially suited for mass production requiring consistent repeatability ⚡ Electrical Engineering & Electronics Switchgear and distributor manufacturing Enclosures for controls, servers, industrial electronics Very common use due to numerous 90° bends and complex contours ❄️ Household Appliances & White Goods Washing machines, refrigerators, ovens Internal frames, covers, claddings 🏗️ Construction Industry & Architecture Facade elements Roof and wall claddings Metal panels, cassettes 🚆 Transport & Public Transit Rail vehicles, buses, commercial vehicles Interior claddings, technical housings 🛠️ Mechanical & Plant Engineering Chsdpfjyb Hu Nsx Aared Machine frames Protective claddings Switchgear enclosures 🌬️ HVAC / Air Conditioning Technology Ventilation ducts HVAC unit enclosures Air distribution systems 🏥 Medical Technology Equipment enclosures Stainless steel claddings High requirements for precision & surface finish Why Panel Benders in these sectors? ✔ High degree of automation ✔ Excellent repeat accuracy ✔ Ideal for complex bent parts ✔ Gentle processing of painted or coated sheets ✔ Fast processing for small to medium batch sizes

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 30 h, ✅ 1. Metalworking companies with medium to high volumes 🔹 Series production / repeat parts If you produce many identical or similar parts, automation pays off as it reduces the cost per part and ensures consistent quality. 🔹 High production > 1,000 parts/month The higher the output, the faster the investment pays for itself through increased productivity. Cjdpfx Aajyb I Azsrjhd ✅ 2. Companies facing skilled labor shortages or high workloads 🔹 Difficulty finding or retaining qualified staff A robot can partially replace skilled operators and safeguard production capacity. 🔹 Night shifts / 24/5 production Robots can work longer and without fatigue → higher output without additional personnel. ✅ 3. Companies with complex bending processes or high quality requirements 🔹 Tight tolerances / minimizing errors A robot ensures consistent repeatability. 🔹 Complex downstream processes (e.g. handling, deburring, stacking) An integrated robot can take over tasks that would otherwise be performed manually. ✅ 4. Manufacturers facing tight deadlines or cost pressure Short delivery times required Automation reduces throughput times. 🔹 Cost pressure due to competition Longer machine utilization and lower unit costs improve competitiveness. ✅ 5. Future-oriented companies 🔹 Industry 4.0 / digitalization An automated press brake can often be integrated more effectively into IT/MES systems. 🔹 Scalable production If you plan to grow in the future, you have a flexible foundation.

Year of construction: 2010, condition: excellent (used), I sell the automatic magazine GRUNDNER SONDERMASCHINEN MLD. Storing 82 Positions of Material 2,80 x 2,10m Total size 52 x 11,5 m x h. 2,3 + 1,5m. / Double-Deck Loading / Unloading 2 + 1 Positions. Catching head system with vacuum pads Vacuum-System (including pump) Automatic loading. Security fence system fully complete ! Available immediately. Ready for work, possible to test. With CE Certificate and full manuals. Cjdpfx Ajyzcgioarjhd

Condition: used, Year of construction: 2018, mileage: 88,863 km, power: 170 kW (231.14 HP), first registration: 06/2018, overall weight: 15,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, next inspection (TÜV): 11/2028, gearing type: mechanical, emission class: euro6, loading space volume: 6 m³, Equipment: ABS, air conditioning, Internal vehicle number: G400141 Available immediately at our yard in Kaufungen. More information: Luis Lucena Viktoria Sologubova GERMAN Mercedes-Benz ATEGO 1323 4x2 Sweeper Truck Bucher Cityfant 6000 German municipal vehicle with a Bucher-Cityfant-6000 street cleaning unit, 6 m³ stainless steel hopper, separate JCB mounting engine, and extensive safety and comfort features. Vehicle data: Cedpfoy I Hfpsx Aarohd * Vehicle number: G400141 * Vehicle condition: Used * Category: Sweeper truck / Municipal vehicle * First registration: 06/07/2018 * Year of manufacture: 2018 * Mileage: 88,863 km * Fuel type: Diesel * Engine displacement: 5,132 cm³ * Power: 170 kW (231 hp) * Transmission: 8-speed manual transmission * Emission standard: Euro 6c * Environmental badge: 4 (Green) * Wheel arrangement: 4x2 * Axles: 2 * Permissible total weight: 15,000 kg * Unladen weight: 9,150 kg * Payload: 5,850 kg * Color: White * Seats/doors: 2/2 * MOT: new upon purchase * Inspection: due 01/2027 * 1 previous owner Dimensions: * Length: 6,400 mm * Width: 2,550 mm * Height: 3,300 mm Street cleaning unit: * Manufacturer: Bucher Municipal AG * Type/trade name: Cityfant 6000 * Serial number: SEQ 8869 * Year of manufacture: 2018 * Hopper: 6.0 m³ * Stainless steel hopper * Hopper tilting angle: approx. 55° * Stainless steel dirt chute * Observation flaps left and right * 4-inch dirty water drain * Hopper drainage * Air shut-off valve on the suction hose * A-coupling on the air duct sieve * Multi-stage, pneumatically operated safety support * Exhaust routing through the hopper superstructure Mounting engine and sweeping technology: * Separate JCB mounting engine * Engine type: 444-TA4-55 * Power of mounting engine: 55 kW * Separate fuel tank for the mounting engine: 150 liters * Infinitely variable engine speed control * Hydraulic fan drive * Hydraulically driven roller and disc brush * Coated steel suction nozzle * Suction hose diameter: 250 mm * Swiveling tail wheels * Automatic lifting of the sweeping unit when reversing * Work lights on the sweeping unit Recorded operating data of the superstructure: * Operating hours mounting engine: 309 hrs * Operating hours superstructure: 416 hrs * Operating time sweeping unit: 335 hrs 35 min * Operating time disc brush: 316 hrs 27 min * Operating time roller brush: 85 hrs 41 min * Operating time suction fan: 334 hrs 09 min * Documented sweeping distance: 4,189 km * All values according to the display of the Bucher control terminal Water system and operation: * Stainless steel water tank: 1,900 liters * Water level indicator * Bucher Municipal instrument panel * 7-inch color display * Multi-function display * Standard control panel * Cable remote control * Warning lights and flashing beacons Chassis and equipment: * Right-hand drive * Air conditioning * Driver's air suspension seat * Electric windows * Electrically adjustable exterior mirrors * Additional thermal insulation * Radio * Cruise control * Active Brake Assist * Lane Keeping Assist * ESP * Differential lock on the rear axle * Engine brake * Speed limiter * Reversing warning * Daytime running lights * Fleetboard vehicle computer * Short ClassicSpace cab * Parabolic suspension front * Front axle 5.3 t * Pre-wiring for external bodywork * Flashing beacons * Steel rims Tires: * Tire size: 10 R 22.5 * Axle: Aeolus, tread depth approx. 13 mm * Axle: Pirelli, left approx. 7 mm, right approx. 11 mm Inspection and functional test possible after prior appointment. Further information, photo