Used Scm P 64 for sale (579)

Condition: good (used), Year of construction: 2016, operating hours: 16,977 h, functionality: fully functional, feed length X-axis: 140 mm, feed length Y-axis: 50 mm, feed rate X-axis: 18 m/min, edge thickness (max.): 3 mm, total length: 6,000 mm, workpiece height (max.): 60 mm, overall weight: 3,000 kg, SCM OLIMPIC K 800 - T-ERL EDGEBANDER EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Specifications: -- Edge Capacity, 0.4 to 8 mm (0.016 to 5/16") for strip feeding. -- Panel Capacity, min. width 50 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-3/8"). Equipped With: -- Adjustable In-feed Fence: Manually pre-set with digital indicator and pneumatic panel spacing device. -- Pre-Milling Station, RT-E: Spindles 2 x 3.0 HP, 12,000 RPM, (1) with PLC controlled jump action and manual digital indicators positioning. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Servo motor positioning, (4) pressure rollers, first larger, Teflon coated and powered. Workstations: -- End Trimming Station K-SEL: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0 - 15, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Flush Trimming Unit: Top/Bottom, 2 x 1.0 HP, 12,000 RPM with 2 pre-set pneumatic positions, flush and overhang, remote pneumatic in/out positioning. -- Bevel/Radius Trimming Unit: Programmable, servo motor positioning, 2 x 1.0 HP - 12.000 RPM motors for change-over on the fly. -- Corner Rounding / Trimming Unit: For additional top & bottom trimming of linear an/or vertical leading & trailing corner when edgebanding all (4) sides, 2 x 0.8 HP - 12,000 RPM motor. -- Profile Scraping Unit "RAS/1000": Top/Bottom with (2) indexed manual pre-sets. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue Scraping Unit, "RC-V": Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean. -- Buffing Unit "SPN": Top/bottom, oscillating 2 x 0.25 HP - 3,000 RPM motors, tilting up to 12. -- Hot Air Unit: Single blower with adjustable heat range and directional heat shield for top/bottom coverage. Restores color luster on thick pvc edging materials that my be lost during the edge scraping process.Operator Interface: -- Startouch Controller, 12" color touch screen, swivels 270 at in-feed of machine. Capable to store (100) programs, (6) at the touch of a single key. Graphical display of all working units. Tracks production data, diagnostic information and monitors maintenance schedules. Complete With & Features: -- Feed-speed, 36/52 FPM, 1 x 2.5 HP feed drive motor, 200 Hz frequency inverter for all trimming units. -- Electronic, programmable hold-down pressure beam positioning, lighted safety/sound enclosure cover and outboard panel support. -- Actual Model: OLIMPIC K 800 T-FR2 2 glue tanks + 1 glue tank for spare parts Crsdpfexxy Rkjx Addsk

Condition: used, Year of construction: 1990, functionality: fully functional, planing width: 520 mm, total height: 1,200 mm, total width: 1,400 mm, overall weight: 600 kg, table length: 3,000 mm, Equipment: motor brake, SCM F 520 heavy-duty jointer Planing width: 520 mm Table length: 3,000 mm Hydraulic height adjustment of infeed table via foot pedal 4-knife Tersa cutterhead Bevel and concave joint adjustment 4 kW Electric motor brake Machine is fully OPERATIONAL and in GOOD CONDITION The machine can be inspected and tested at any time at the site in Leipzig Crsdpfx Aoxz Tploddsk

Condition: good (used), Year of construction: 1995, functionality: fully functional, planing width: 520 mm, number of planer blades: 4, height adjustment type: electric, Equipment: motor brake, Description SCM FS 520 – Surface planer & thickness planer combination machine | Year of manufacture: 1995 | Good condition For sale is a robust and precise combination machine from SCM: SCM FS 520, built in 1995, ideal for professional workshops and ambitious carpenters/joiners. The machine has been regularly maintained and is in good technical condition. Technical data & features: + Manufacturer / Model: SCM FS 520 + Machine type: Combined surface planer & thickness planer + Year of manufacture: 1995 + Motor power: 5.5 kW (three-phase) + Cutterblock: Centrofix system (quick knife change, precise cut) + Number of knives: 4 Centrofix knives + Planing width: 520 mm Codpfjx Aibaox Addsrk + Thicknessing width: 520 mm + Max. planing depth: approx. 5 mm + Thicknessing height: 3 – 250 mm + Feed speed: 6–12 m/min (2-speed) + Surface table length: approx. 2200 mm (infeed & outfeed table) + Pneumatic table opening: Yes – for easy switching between surfacing and thicknessing + Electric height adjustment of thicknessing table with digital readout + Weight: approx. 1000 kg + Extraction port: 120 mm + Voltage: 400 V Condition & maintenance: + Machine from a well-maintained workshop + Centrofix knives in good condition + Tables flat, bearings run smoothly + Immediately ready for use + No known repairs required You will receive an invoice with VAT shown. Shipping via freight forwarder by arrangement possible. Price: +Negotiable €7650 net ex-stock Haldensleben.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, rotational speed (max.): 8,000 rpm, shaft length: 145 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Crjdpexxar Usfx Addjk Router unit Number of motors: 1 Shaft length: 145 mm Motor power: 4 kW Speed: 8,000 rpm MACHINE DETAILS Installed total power: 5 kW Motor power: 3 kW

Condition: excellent (used), SCM F520 CE leveling machine Working width 520mm 4kw motor Crjdpfxondhdtj Addjk 4 knife shaft Traditional knives Hydraulic lifting and lowering of the work surface Main fence adjustable up to 45 Tops length 3000mm CE certificate

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Credpfoxnldbox Addek

Condition: used, Year of construction: 2012, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,270 mm, cutting height (max.): 100 mm, saw blade diameter: 315 mm, main saw diameter: 315 mm, trimming length: 3,200 mm, type of input current: three-phase, input voltage: 400 V, - Year of manufacture: 2012 Credpoxdyvdofx Addjk TECHNICAL SPECIFICATIONS: - Max. saw blade diameter: 315 mm - Cutting length: 3200 mm - Max. cutting height: up to 100 mm - Angle cutting: 0-45 degrees - Saw blade speed: 4000 rpm - Main motor power: 5 kW - Scoring unit motor power: 0.9 kW - Max. parallel cut: 1270 mm - Weight: 800 kg

Condition: used, Year of construction: 2007, Tenoning spindle 3 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Control 100 PC SCM Windor 100 CNC still in operation, available for inspection until the end of December 2025 ----- Powerful and flexible CNC manufacturing system for windows and doors Processing of workpieces up to a maximum length of 4500 mm, width of 250 mm, and thickness of 150 mm Consists of a Windor 60 model B Infeed conveyor Slotting section: ----- Item 1: Miter saw ----- - Motor 4 kW - 3000 rpm - Spindle diameter 40 mm - Maximum tool diameter 400 mm, bore 80 mm Item 2: 1st slotting spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - Locking device "Jolly" - Continuous vertical positioning - Interpolating rotations, automatic inclined window adjustment +/- 60 degrees Item 3: Electric spindle with HSK 63 F tool holder ----- - Min/max. Rotation speed 1000-12000 rpm - Maximum motor power 11 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Item 4: 2nd slotted spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - "Jolly" locking device - Continuously variable vertical positioning - Interpolating rotations, automatic inclined window device +/- 60 degrees Item 5: 3rd slotted spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - Locking device "Jolly" - Continuous vertical positioning Fleximat ----- Including left and right stops with horizontal CNC adjustment for the following through-feed operations: Lock case milling and 9-degree anuba drilling from the right. Dowel drilling and strike plate marking from the left and right, 7 spindles each. Cup hinge drilling and olive drilling from the top. Profile part ----- Item 5: Power 2000 F4: Electric spindle with HSK 63 F tool holder ----- - Working from the left - Min/Max. Rotation speed 1000-18000 rpm - Maximum motor power 12 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Item 6: 1st profile spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm - Continuously variable vertical positioning - Continuously variable horizontal positioning Item 7: 2nd profile spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm Cedpfxow Im Iis Addjrk - Continuous vertical positioning - Continuous horizontal positioning Item 7: 3rd profile spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm - Continuous verti...

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Features and technical data: - Planing width: 410 mm - Min. thicknessing height: 3 mm - Max. thicknessing height: 240 mm - Max. cutting depth: 7 mm - Number of knives: 3 pcs. Tersa knives - Thickness table adjustment: mechanical - Thickness display: mechanical - Motor: 4 kW - Feed speed: 6/12 m/min - Infeed roller: steel - Outfeed roller: steel - Extraction port diameter: 120 mm Crjdoxwz Izopfx Addok Availability: approx. mid-April 2026 Location: Hesse

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, main saw diameter: 315 mm, tool diameter: 315 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! Crjdpfx Adexxakqedjk TECHNICAL DETAILS Main saw blade diameter: 315 mm Max. tool diameter: 315 mm MACHINE DETAILS Installed total power: 4 kW EQUIPMENT CE marking Included scoring saw blade Tiltable saw blade

Condition: like new (used), Year of construction: 2014, functionality: fully functional, planing width: 510 mm, total length: 2,725 mm, overall weight: 715 kg, table length: 2,725 mm, number of blades: 4, blade shaft diameter: 120 mm, height adjustment type: mechanical, roll width: 120 mm, Equipment: motor brake, SCM F2 F520 Planer Jointer Surfacer – LIKE NEW! Crsdpfjxxm Sbjx Addsk Surface planer from renowned brand SCM. The machine is in excellent technical condition. Fully serviced. Italian manufacturer. TECHNICAL SPECIFICATIONS: - Maximum planing width: 510 mm - Cutterblock diameter: 120 mm - Number of knives: 4 TERSA - Motor: 5.5 kW - Infeed table length: 1495 mm - Outfeed table length: 1175 mm - Total table length: 2725 mm - Adjustment of infeed and outfeed table heights - Fence: 190 x 1200 mm - Fence angle adjustment - Safety switch - Power supply: 400 V - Cutterblock silencing - Cutterblock guard - Year of manufacture: 2014 - Operating manual (DTR) MACHINE DIMENSIONS: - Length: 2725 mm - Width: 900 mm - Height: 1200 mm - Weight: 715 kg Financing options available: leasing or installments. Simply visit our website: jbsmaszyny.pl You are welcome to test the machine. Where can you view our machines? JBS MASZYNY STOLARSKIE WOLICA DRUGA 26 23-310 MODLIBORZYCE Machine transport available across Europe and beyond! Tel: 664 335 465 Tel: 530 632 386

Condition: used, Year of construction: 2023, Technical Data Working Area I.M.S. I.U. Working area X axis 5515 mm (217") Working area Y axis 1620 mm (63¾") Material passage Y 1900 mm (74¾") Material passage Z 250 mm (9¾") Workpiece length for pendulum processing 2600 + 2600 mm (102" + 102") Traverse speed of X-Y axes PRO-SPACE 56 m/min (184 ft/min); Traverse speed of X-Y axes PRO-SPEED 78 m/min (256 ft/min). *For further details, please refer to the corresponding machine layout. With the 5-axis motor, the Y working area increases to 1680 mm (66") for JQX motor, or 1720 mm (67½") for KS/KT motor. Max. loadable panel width during horizontal drilling, spindle oriented vertically only, with no middle reference stops. Installation Data I.M.S. I.U.: Installed power: 23 – 28.5 KVA Electrical specifications: 400 V, 50 Hz, 3 phases Air consumption: 450 Nl/min Compressed air consumption: 4500 m³/h (2650 CFM) Extraction air speed: 30 m/s Extraction port diameter: 250 mm (9.8") Noise level VSA* / LAV*: Drilling 72.2 dB(A) / 74.6 dB(A), Milling 74.3 dB(A) / 80.7 dB(A) Codpfoxwht Djx Adderk Reference standard: EN ISO 11202:1995 *VSA = without load and without extraction *LAV = in operation, with extraction Location: Nattheim

Condition: good (used), Year of construction: 2000, Multiblade tracked SCM M3 4 - Italian production - year of production 2000 - DTR TECHNICAL SPECIFICATIONS: track width 300 mm cutting height 120 mm engine power 25 kW max. blade diameter 350 mm max. workpiece width 1000 mm min. workpiece length 400 mm adjustable feed on the inverter pneumatically adjustable ruler on the right revolver ruler setting of 6 types three rows of anti-recoil pawls possibility of putting on a board - a shoe spindle diameter 50 mm sleeve diameter 70 mm sleeve equipped with spacers automatic central lubrication four upper pressure shafts spigot diameter 180 mm and 120 mm Cjdpfog Tdfdsx Adderk dimensions of the machine (length / width / height) 210/175/160 cm weight 1800 kg

Condition: like new (used), functionality: fully functional, Working width: 1100 mm Motor: 11 KW 2 units: - First unit: steel calibration roller - Second unit: rubber roller with a pressure shoe pneumatically positioned Features: - Smooth feed speed adjustment of the conveyor - Pneumatic oscillation with photocell sensors - Machine function activation from the control panel - Automatic material thickness gauge - Vacuum table - New conveyor belt Year of production: 2001 Weight: 1206 kg Codpfx Adjw Dq Ersdork Dimensions: Width 150 cm, Length 200 cm, Height 200 cm

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical specifications: - Spindle clamping length: 180 mm - Spindle tilt: -10° to +45° - Motorized spindle stroke with fine adjustment - Motorized spindle tilt - Motor: 5.5 kW - Table size: 1200 x 730 mm - Largest table opening: 420 mm - Motor brake - Speeds: 3000/4500/6000/7000/10000 rpm - Speed display - Extraction port: 125 mm Crjdpfx Aoxwz Rcjddsk - With Aigner integral fence - With 3-roller power feed Availability: approx. mid/end of January 2026 Location: Hesse

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 120 mm, rotational speed (max.): 18,000 rpm, workpiece width (max.): 410 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum workpiece width: 410 mm Maximum cutting height: 120 mm Crodpfsxw U Nxox Addjk Maximum speed: 18,000 rpm MACHINE DETAILS Installed total power: 5 kW Motor power: 4 kW Saw spindle: bottom EQUIPMENT CE marking

Condition: used, Year of construction: 1994, functionality: unexamined, planing height: 120 mm, planing width: 230 mm, total height: 1,700 mm, total length: 4,600 mm, overall weight: 3,550 kg, Machine with 6 planing heads bottom 4 kW, right 4 kW, left 4 kW, top 5.5 kW, top 4 kW, bottom 4 kW Working width 25 - 230 mm Planing height 6 - 120 mm Feed speed 5 - 35 m/min Feed motor 4 kW Spindle speed 6000 rpm Crjdpfx Ajv Dx Eusddjk Spindle diameter 40 mm Infeed table length 2000 mm Machine weight 3800 kg Dimensions (L x W x H) approx. 4550 x 1700 x 1700 mm

Condition: excellent (used), Year of construction: 2018, SCM Línvicilbe SI3 Panel Saw Type: SI 3 Year of manufacture: 2018 Control: 3-axis Cedex Dbi Espfx Addork Length of aluminium table: 3,200 mm Cutting width right of the saw blade: 1,500 mm Motor power: 7 kW (minimum) Scoring unit Saw blade diameter: 400 mm Maximum cutting height: 140 mm Touchscreen with operation for: Automatic height adjustment Automatic tilt adjustment Automatic parallel fence

Condition: used, Year of construction: 2007, functionality: fully functional, grinding width: 950 mm, grinding height: 170 mm, height adjustment type: electric, type of input current: three-phase, - Italian-made - Year of production: 2007 - Combination pad (combi shoe) TECHNICAL SPECIFICATIONS: - Sanding width: 950 mm - Sanding height: 4-170 mm - Motor power: 7.5 kW Crsdexdxfqjpfx Addok - 1st unit: Steel roller with pneumatic lift - Roller diameter: 110 mm - 2nd unit: Combination pad (combi shoe) - Pneumatic lift for rubber roller: 78 Shore - Pad with pneumatic lift - Pneumatic oscillation - Air cleaning for sanding belts - Electric height adjustment - Two belt speeds: 8.3 m/s and 16 m/s - Electronic sanding height positioning - Feed speed, stepless adjustment: from 4-20 m/min - Minimum workpiece length: 500 mm - Extraction port diameter: 2 x 140 mm - Machine dimensions (L/W/H): 150 x 180 x 210 cm - Weight: ~1010 kg

Condition: used, Year of construction: 2011, functionality: fully functional, We are offering this pre-owned SCM Tech Z2 CNC machining center, manufactured in 2011 and currently located in Belgium. This woodworking machine features a 2700 x 1300 mm working area, a high-speed spindle reaching 24,000 rpm, and a 7.5 kW motor, providing precision and efficiency for a wide range of woodworking applications. Advantages: Large Working Area. Cjdjxq Hpdspfx Addjrk High Spindle Speed. Versatile Drilling and Milling Capability. Flexibility in Tools & Tool Changes.

Condition: excellent (used), Year of construction: 2022, operating hours: 41,000 h, functionality: fully functional, SCM edge banding machine equipped with servomotors. In excellent condition, but we are switching to another brand... 12" touchscreen control panel Three spray stations (infeed, central, and polishing outfeed) Credpfxjxy Ht Ue Addek Servo-driven adjustment of infeed fence Servo-driven adjustment of workpiece height DIA tools (60 mm height) on the pre-milling unit SGP-E glue pot with upper guide End trimming unit with the possibility of R-edge trimming Milling unit with stepless adjustment of R1/R2 radius Scraper unit with stepless adjustment of R1/R2 radius Corner rounding unit with stepless control via the system The machine is still in operation Price negotiation possible...

Year of construction: 2019, condition: ready for operation (used), Main Drive Spindle speed range 3500 Table Table load 6500 kg Additional Equipment Shredder for waste Tiltable side pressure rollers in the cross-cutting area Crsdpfxjxtgmuo Addjk Vibration conveyor for waste after longitudinal cutting Tiltable grippers in the longitudinal cutting area FLEXCUT 02 with 2 movable sets and 3 double grippers in each set Label editor with barcode printer capability Online diagnosis This SCM Gabbiani A3 130 panel saw was manufactured in 2019. It features a longitudinal cutting range of 3200 mm and a cross-cutting range of 2440 mm, with a main saw motor power of 18 kW and a maximum saw blade diameter of 430 mm. The machine supports a maximum panel size of 3200 x 2440 mm and can handle a loading weight up to 6500 kg. Consider the opportunity to buy this SCM Gabbiani A3 130 panel saw. Contact us for more information. Application Types Sawing (Wood)

Condition: excellent (used), SCM MiniMax Formula1 8/24 milling machine Technical specifications: Spindle diameter: 40 mm Spindle height: 140 mm RPM: 3000/4500/6000/7000/10000 r/min Manual spindle height adjustment Spindle lock Work table dimensions: 730x1860 mm Dimensions of working table with carriage: 760x600 mm Cjdjuyg Tcepfx Adderk Culagi arms adjustable Power supply: 400 V Overall dimensions: Length: 3680 mm Width: 1200 mm Height: 1500 mm

Condition: new, Year of construction: 2025, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Csdpfx Adoxw N Sbedjrk Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Csdpfx Adoxw N N Hsdsrk Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -