Used Scm Si 16 W for sale (618)

Condition: used, Year of construction: 2017, power: 20 kW (27.19 HP), edge thickness (max.): 12 mm, feed rate X-axis: 20 m/min, The machine has the following configuration: Pre-milling unit End-capping unit Number of motors in end-capping unit: 2 Rough milling unit, top and bottom Number of motors in rough milling unit: 2 Gedpfxjzmtlds Apwoka Edge rounding unit Number of motors in edge rounding unit: 2 Edge trimming unit Glue application unit Edge finishing unit Number of motors in edge finishing unit: 2 TECHNICAL DETAILS Workpiece processing Min. board thickness: 8 mm Max. board thickness: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 20 m/min MACHINE DETAILS Total connected load: 20 kW EQUIPMENT Preheating lamps for workpiece sides Edge roller magazine Glue reservoir for EVA hot melt adhesive Spray unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7981

Condition: used, Year of construction: 2012, number of axes: 5, working width: 1,240 mm, working length: 3,060 mm, Equipment: CE marking, TECHNICAL DETAILS Machining process: Drilling, Milling Working area X-axis: 3,060 mm Working area Y-axis: 1,240 mm Max. panel thickness: 200 mm Number of working areas: 2 Table type: Flat table Table design: Nesting Table length: 3,060 mm Table width: 1,240 mm Number of controlled axes: 5 Drilling unit Number of drilling units: 1 Installation position: Top Vertical drilling spindles: 12 Horizontal drilling spindles X-direction: 4 Horizontal drilling spindles Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Number of milling spindles: 1 Installation position: Top Controlled axes: 5 Spindle cooling: Liquid cooling Grooving unit Number of grooving units: 1 Installation position: Top Design: Fixed grooving unit Grooving direction: X-direction MACHINE DETAILS Power of main electrospindle: 8.5 kW Power of milling spindle motor: 8.5 kW Gsdpfxezmvqve Apwska Control system: PC Control Programming software: Xylog Plus Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h EQUIPMENT CE marking Front safety mats 16-position tool magazine on the machining head Automatic tool changer Vacuum suction cups for workpiece fixing The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6487

Condition: used, functionality: fully functional, SCM Sandya 7S wide belt sanding machine Gkjdpfezudghox Apwsa Working width: 1100 mm Sanding height: 4 – 170 mm 1 metal sanding head, 11 kW 2 combi sanding heads, 11 kW Electric height adjustment Pneumatic oscillation Adjustable feed speed: 4.5-9 m/min Optical oscillation Vacuum pump

Condition: excellent (used), CATALOG NUMBER 7901 Godpezul Akjfx Apwoka Technical specifications: - track width: 300mm - working width of roller: 300mm - max saw blade diameter: 350mm - saw blade bore diameter: 70mm - max cutting height: 120mm - table width with extension: 750mm - table length: 1530mm - from above: - kickback prevention barriers (safety barrier against material reverse) - metal sliding roller - kickback prevention barriers - metal sliding roller - shaft with saw blades - 2 smooth metal sliding rollers - from below: - guide rail - kickback prevention barriers - track - central track lubrication - stepless feed speed adjustment - feed motor: 1.5kW - main motor: 22kW - brake - suction nozzle diameter: 200mm - overall dimensions (L/W/H): 2300x1370x1570mm - weight approx.: 1700kg ADVANTAGES – Italian manufacturing – very good condition – technical DTR documentation – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR (calculated at 4.2 PLN/EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalog number 8074 TECHNICAL DATA PLANER: - roller width 410mm - 3-knife roller Gsdpfx Apozuk Ewowoka - smoothing comb - roller guard - adjustable angle guide - table length 2000mm - both tables adjustable THICKNESS PLANER: - max thickness of workpiece on the thickness planer 220mm - thickness planer roller guard - from above: - pawls - toothed, twisted infeed roller - pressure rollers - planing roller - pressure roller - smooth outfeed roller - main motor 4kW - electric brake - electric table height adjustment (up/down) - knife setting device - 2 speed settings 6000/12000rpm - dust extraction port diameter 2x120mm - dimensions L/W/H 2060x970x1150mm - weight 660kg ADVANTAGES - Made in Italy - Smoothing comb - Knife setting device - Unpainted - Excellent condition - Used planer-thicknesser Net price: 16900 PLN Net price: 4024 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Catalog number: 8071 TECHNICAL DATA - Number of spindles: 21 pcs - Distance between extreme spindles: 640 mm Gkodpfxjzuk Ais Apwea - Spindle spacing: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 900x350 mm - Height to table surface: 900 mm - Stroke of feed cylinder (drilling depth adjustment): 50 mm - Drilling speed, pneumatically adjustable - Drilling angle, manually adjustable - Main motor: 1.5 kW - Side guides: 400 mm - Compressed air requirement: 6-8 bar - Diameter of dust extraction port: 60 mm - Dimensions (L/W/H): 1000x860x1270 mm - Weight: 267 kg ADVANTAGES – Made in Italy – 21 spindles – drill bits mounted on quick-release fittings – Drilling in vertical, horizontal, and angled positions – Unpainted – Used drill press, very good condition Net price: 6900 PLN Net price: 1643 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: used, machine/vehicle number: 008288, Position 1: Panel Feeding and Loading SCM-MAHROS - STEFANI - CELASCHI Position 2: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Position 3: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Position 4: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Position 5: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Godsx Nv S Uopfx Apweka Position 6: Splitters SCM-MAHROS - STEFANI - CELASCHI Position 7: Panel Stacking and Offloading SCM-MAHROS - STEFANI - CELASCHI

Condition: used, AD planer Minimax 310, good condition, 2.2 kW, 200 kg. Price changes reserved, subject to errors, printing and typographical mistakes. Gjdpjx H Udqjfx Apwoka

Condition: excellent (used), CATALOG NUMBER 7618 TECHNICAL DATA - shaft width: 500 mm - number of knives: 4 pcs - max thickness of workpiece: 230 mm top section: - anti-kickback fingers - toothed, feed, swivel, sequential infeed shaft - pressure rollers Godpfx Apoztxdfswjka - planing shaft - pressure roller - smooth feed outfeed shaft bottom section: - 2 slip rollers in the table - motor: 5.5 kW - manual table height adjustment - 2 feed speeds: 7.5; 13 m/min - extraction port diameter: 160 mm - dimensions (L/W/H): 1100x1000x1200 mm - weight: 600 kg ADVANTAGES – made in Italy – original paint (not repainted) – used thickness planer, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 8029 TECHNICAL DATA - track width: 300mm - working width of the roller: 300mm - max. blade diameter: 350mm - blade bore diameter: 70mm - max. cutting height: 120mm - table width with extension: 760mm - table length: 1540mm * from above: - deflectors (barrier to prevent material from recoiling) - metal feed roller, with pressure - deflectors/pawls - metal feed roller, with pressure - saw arbor - 2 smooth, metal feed rollers * from below: - guide strip - deflectors/pawls - track - central track lubrication - stepless feed speed adjustment - feed motor: 1.1kW - main motor: 18.5kW - diameter of dust extraction nozzle: 180mm - overall dimensions (L/W/H): 2250x1450x1600mm - weight: 1570kg ADVANTAGES - Made in Italy - Very good condition - Used multi-blade saw Gsdpjztv Saofx Apwjka Net price: 36900 PLN Net price: 8786 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8031 TECHNICAL DATA - track width 300mm - working width of the roller 300mm - max. disc diameter 350mm - disc bore diameter 70mm - max. cutting height 120mm - table width with extension 1030mm - table length 1740mm * from above: - kickback pawls (barrier to prevent material from retracting) 2 rows - sliding roller, metal, pressure roller - kickback pawls/ratchets - sliding roller, metal, pressure roller - roller with saws - 2 smooth, metal sliding rollers * from below: - guide strip - kickback pawls/ratchets - track - central, electric track lubrication - stepless feed speed adjustment Gksdpfsztv Riex Apwoa - feed motor 1.1kW - main motor 25kW - dust extraction nozzle diameter 1x200mm, 1x120mm - overall dimensions L/W/H 2550x1800x1450mm - weight 1770kg ADVANTAGES - Made in Italy - Unpainted - Very good condition - Used multi-blade saw Net price: 57900 PLN Net price: 13786 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to larger fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8021 TECHNICAL DATA - max. width of the workpiece: 1100 mm - max. height of the workpiece: 150 mm 2 units: 1) grooved rubber roller for calibrating 2) grooved rubber roller - motor power: 11 kW Gkedpfeztaqajx Apwsa - brake - from above: - split, sliding metal roller - pressure roller - unit - pressure roller - unit - pressure roller - cleaning brush - from below: - 2 sliding metal rollers - conveyor belt - 2 sliding metal rollers (outlet) - new conveyor belt - pneumatic belt oscillation - electric table lifting - stepless feed speed adjustment - feed motor: 1.5 kW - grinding thickness potentiometer - working pressure: 8-10 bar - dust extraction nozzle diameter: 3x165 mm, 1x140 mm - overall dimensions (L/W/H): 1870x1850x2210 mm - weight: 2165 kg ADVANTAGES - Made in Italy, SCM brand - New conveyor belt - 2 units - Grinding thickness potentiometer - Unpainted - Used sanding machine, very good condition Net price: 26900 PLN Net price: 6405 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Catalogue number 7878 TECHNICAL DATA - track width: 220 mm - shaft width: 200 mm - max saw blade diameter: 350 mm - saw blade bore diameter: 70 mm - max cutting height: 120 mm - table width with clearance: 1100 mm - table length: 1640 mm - from above: - row of pawls/kickers - 1 metal pressure feed roller - pawls - metal pressure feed roller - shaft with saws - 2 metal pressure feed rollers - from below: - guide - pawls/kickers - track Gjdpfx Apjztadaowjka - stepless feed speed adjustment with inverter - feed motor: 1.1 kW - main motor: 29 kW - central lubrication of the track - extraction port diameter: 180 mm - overall dimensions (LxWxH): 2000x1600x1500 mm - weight: 1480 kg ADVANTAGES – Italian manufacture – used multi-blade saw – very good condition Net price: 27,900 PLN Net price: 6,643 EUR based on 4.20 EUR exchange rate (Prices may change depending on exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7863 TECHNICAL DATA - Track width: 300mm - Working shaft width: 300mm - Max. disc diameter: 350mm - Disc bore diameter: 70mm - Max. cutting height: 120mm - Table width with extension: 750mm - Table length: 1530mm - Top: - Kickback barriers (protection against material reversing) - Metal sliding roller - Kickback barriers - Metal sliding roller - Shaft with saw blades - 2 smooth metal sliding rollers - Bottom: - Guide bar - Kickback barriers - Track - Laser - Centralised track lubrication - Infinitely variable feed speed via inverter - Feed motor: 1.5kW - Main motor: 26kW - Brake - Extraction port diameter: 200mm - Overall dimensions (L/W/H): 1700x1400x1600mm - Weight approx.: 1700kg Gsdpeztaanjfx Apwska ADVANTAGES - Italian manufacture - Equipped with laser - Very good condition - Used multi-blade saw Net price: 39,900 PLN Net price: 9,500 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary subject to higher exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7946 Technical Data: - Track width: 300 mm - Working width of shaft: 300 mm - Max. blade diameter: 350 mm - Blade bore diameter: 70 mm - Max. cutting height: 120 mm - Table width with extension: 1030 mm - Table length: 1840 mm – Top: - Kickback protectors (anti-kickback barrier): 2 rows - Metal feed roller, pressure type - Kickback protectors - Metal feed roller, pressure type - Shaft with saw blades Gkedszr U Htjpfx Apwja - 2 smooth metal feed rollers – Bottom: - Guide rail - Kickback protectors - Track - Laser - Central lubrication of track - Stepless feed speed adjustment - Feed motor: 1.1 kW - Main motor: 18.5 kW - Extraction outlet diameter: 200 mm - Overall dimensions (L/W/H): 1900x1800x1600 mm - Weight: 1770 kg Advantages: – Italian made – With laser – Unpainted – In very good condition – Used multi-blade saw Net price: 55,900 PLN Net price: 13,300 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, machine/vehicle number: 007966, Position 1: Panel Feeding and Loading SCM-EVOLUTION C undefinedPosition 3: Panel Stacking and Offloading SCM-EVOLUTION C Gkedpfxswu Agpe Apwsa

Condition: excellent (used), CATALOG NUMBER 7479 Technical data: - shaft width: 410 mm - 4-knife shaft (TERSA) - noise reduction comb - shaft guard - table length: 2610 mm - longer infeed table: 1435 mm - cast iron tables - both tables adjustable - original cast iron tiltable fence - brake - extraction port diameter: 115 mm - motor: 4 kW - dimensions (LxWxH): 2610x960x1110 mm - weight: 578 kg ADVANTAGES – Made in Italy – 4-knife shaft – brake – noise reduction comb – longer infeed table – unpainted – used surface planer, in very good condition, original DTR documentation Net price: 21,900 PLN Net price: 5,200 EUR (exchange rate 4.2 EUR) (Prices may change depending on significant exchange rate fluctuations) Gkodpfxezr Itgj Apwoa

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Gkedpfx Apozc Ilxswsa

Condition: excellent (used), CATALOGUE NUMBER 8063 Technical specifications: - roller width 640mm - number of knives 4 pcs - max. thickness of workpiece 300mm – from top: - pawls - toothed infeed roller, pulling, twisted - pressure roller - planing roller - pressure roller - smooth outfeed roller, pulling, rubber - digital thickness display - motor 7.5kW - electric brake - electric table lifting Gjdpjzrwdnefx Apwoka - 4 types of rotation speeds 5000/8000/12000/19000m/min - diameter of dust extraction port 160mm - dimensions L/W/H 1400x1100x1250mm - weight 955kg Advantages: - Made in Italy - Electric thickness display - Electric table lifting - Unpainted - Used thickness planer, very good condition, original DTR documentation Net price: 32900 PLN Net price: 7835 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8064 TECHNICAL DATA - Max. diameter of the main saw blade with a scoring blade: 350mm Gkodszrwbtepfx Apwoa - Max. cutting height: 130mm - Main blade adjustable up/down + angle, manually - Spindle diameter: 30mm - With a crosscut table - Cutting length on the table: 3200mm - Cutting width adjustable electrically with a fence: 1320mm - With a side table - With a scoring blade - Max. diameter of the scoring blade: 120mm - Spindle diameter: 20mm - Main motor: 7.5kW - 3 types of spindle speeds: 3000/4000/5000 rpm - Diameter of the dust extraction outlet: 120mm - Dimensions of the table with extension and widening: 1870x1440mm - Blade guard - Dimensions (L/W/H): 4100x3400x1500mm - Weight: 860kg ADVANTAGES - Italian made - Cutting width adjustable electrically - With a scoring blade - Unpainted - DTR and CE documentation - Used saw, very good condition Net price: 26900 PLN Net price: 6405 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7967 TECHNICAL DATA - max. width of workpiece: 1100 mm - max. height of workpiece: 170 mm 2 units: 1) metal grooved roller for calibration 2) grooved rubber roller + shoe + metal roller – from above: - slip rubber roller - unit (two units on one motor) 15 kW - slip rubber roller - take-off rubber roller - tape blowing – from below: - 2 slip metal rollers - conveyor belt - 2 slip rubber rollers - pneumatic tape oscillation Gksdpfx Aezruttepwja - grinding thickness potentiometer - electric table lifting + manual (for precise adjustment) - pneumatic brake - 2 feed speed types - working pressure 6-8 bar - dust extraction nozzle diameter 2x140 mm - overall dimensions L/W/H 1830x1670x1950 mm - weight 1160 kg ADVANTAGES - Made in Italy - 2 grinding units - Unpainted - Used sander, in perfect condition Net price: 72900 PLN Net price: 17357 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 2015, operating hours: 18,000 h, This CNC SCM Tech Z5 machining center will be auctioned off in our online industrial auction / machine auction for woodworking machinery. Gedozt Hgnepfx Apwjka You can find this and many other items on our platform.

Condition: used, Year of construction: 1996, Working width: 520 mm Planer shaft: Tersa Number of knives: 4 Jointing table length: 2300 mm Jointing fence angle adjustable: yes Jointing tables folding: pneumatic Maximum thicknesser pass height: 250 mm Thickness table height adjustment: electric Thickness indication: digital Feed speed: 5 / 8 / 12 / 19 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: segmented Table rollers: no Motor power: 5.5 kW Motor brake: yes, automatic Gkjdpey A Hh Tefx Apwoa Extraction connection: 120 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 980 kg

Condition: excellent (used), Catalog number 7775 TECHNICAL DATA - roller width 640mm - number of knives 4 pcs - max. thickness of the workpiece 300mm – from top to bottom: - feed rollers - toothed, pulling, and twisting infeed roller - pressure roller - planing roller - pressure roller - 2 smooth, pulling, rubber feed rollers - digital thickness display - motor 5.5kW - electric table lifting 0.7kW - stepless feed rate adjustment 6-20m/min Gkodpozrlbnofx Apwsa - feed motor 1.1kW - diameter of dust extraction nozzle 150mm - dimensions L/W/H 1000x1400x1200mm - weight 950kg ADVANTAGES - Italian made - electric thickness display - electric table lifting - used thickness planer, very good condition, original DTR documentation, CE Net price: 28500 PLN Net price: 6790 EUR depending on the exchange rate of 4.2 EUR (Prices may change due to significant fluctuations)

Condition: used, machine/vehicle number: 008722, X axis working area: 3050 mm Y axis working area: 900 mm Main Electrospindle power: 5.5 KW Number of controlled axes: 3 axes Gkjdjztkb Aspfx Apwja Total number of drilling spindles: 14