Used Scm Superset 23 for sale (653)

Condition: used, Year of construction: 2022, functionality: fully functional, Equipment: CE marking, Machine is USED, excellent condition, first owner. Machine can be packed and ready for transport from Sellers warehouse in Croatia witihn 5 days after order confirmation ! OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized Njdpszv Tibofx Am Uswk - Electronic positioning of top presser - Panel spacer on infeed fence - "Nesting" copying device kit - "AAR" anti-adhesive unit - Spray-mist device for edge finishing - Spray-mist device for delicate edges - RC-N glue scraping unit - "SP-V" brushing unit 1 - "EASY SIZE" device - Infrared ceramic lamp - Gluing unit with pre-melting device - "SGP" glue pot with automatic dosing by NC in substitution of the standard one - Diamond tools for pre-milling unit h=64-no.2 knives TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Opening for panel support roller mm 500 Worktable height mm 900 MACHINE DIMENSIONS (transport): lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm

Condition: used, machine/vehicle number: 007966, Position 1: Panel Feeding and Loading SCM-EVOLUTION C undefinedPosition 3: Panel Stacking and Offloading SCM-EVOLUTION C Nodpfxowu Agpj Am Ujwk

Condition: excellent (used), SCM K360 HP Edge Banding Machine Liquids Pre-milling cutters, Plate heating Pre-heating unit Edge banding application with roller, Replaceable tank Nodpfozwd Iksx Am Uewk Features a glue drain Pneumatic pre-trimming cutter, Liquids Finished edge trimming cutters Top and bottom milling unit (multi-cutter R1-R2), Corner rounding unit, Profile edging (multi R1-R2), Flat edging, Liquids Polishing unit The machine features NC control Max. component height 60mm Max. edge banding thickness in roll 3mm, Feed rate 11m/min Original mileage less than 30,000 meters, in my opinion, the technical condition is very good Inspection and testing possible on site.

Condition: excellent (used), CATALOGUE NUMBER 8063 Technical specifications: - roller width 640mm - number of knives 4 pcs - max. thickness of workpiece 300mm – from top: - pawls - toothed infeed roller, pulling, twisted - pressure roller - planing roller - pressure roller Nodozrwdnspfx Am Ujwk - smooth outfeed roller, pulling, rubber - digital thickness display - motor 7.5kW - electric brake - electric table lifting - 4 types of rotation speeds 5000/8000/12000/19000m/min - diameter of dust extraction port 160mm - dimensions L/W/H 1400x1100x1250mm - weight 955kg Advantages: - Made in Italy - Electric thickness display - Electric table lifting - Unpainted - Used thickness planer, very good condition, original DTR documentation Net price: 32900 PLN Net price: 7835 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8064 TECHNICAL DATA - Max. diameter of the main saw blade with a scoring blade: 350mm - Max. cutting height: 130mm - Main blade adjustable up/down + angle, manually - Spindle diameter: 30mm - With a crosscut table Nedpfx Aszrwbtem Uswk - Cutting length on the table: 3200mm - Cutting width adjustable electrically with a fence: 1320mm - With a side table - With a scoring blade - Max. diameter of the scoring blade: 120mm - Spindle diameter: 20mm - Main motor: 7.5kW - 3 types of spindle speeds: 3000/4000/5000 rpm - Diameter of the dust extraction outlet: 120mm - Dimensions of the table with extension and widening: 1870x1440mm - Blade guard - Dimensions (L/W/H): 4100x3400x1500mm - Weight: 860kg ADVANTAGES - Italian made - Cutting width adjustable electrically - With a scoring blade - Unpainted - DTR and CE documentation - Used saw, very good condition Net price: 26900 PLN Net price: 6405 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: like new (used), Year of construction: 2003, I sell the panel beam saw SCM Sigma 85KC. Year 2003. Cutting size 3300x3200mm. Cutting height 85mm. Main motor 7,5kW Scoring motor 1,1kW Total power 10kW Total area covered W.5400mm x D.7000mm 5 pcs. gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. WinCut optimising software included. Nedpozvhy Iofx Am Ujwk Very good condition. Available immediately.

Condition: excellent (used), CATALOGUE NUMBER 7967 TECHNICAL DATA - max. width of workpiece: 1100 mm - max. height of workpiece: 170 mm 2 units: 1) metal grooved roller for calibration 2) grooved rubber roller + shoe + metal roller – from above: - slip rubber roller - unit (two units on one motor) 15 kW - slip rubber roller - take-off rubber roller - tape blowing – from below: - 2 slip metal rollers Nodozruttepfx Am Ujwk - conveyor belt - 2 slip rubber rollers - pneumatic tape oscillation - grinding thickness potentiometer - electric table lifting + manual (for precise adjustment) - pneumatic brake - 2 feed speed types - working pressure 6-8 bar - dust extraction nozzle diameter 2x140 mm - overall dimensions L/W/H 1830x1670x1950 mm - weight 1160 kg ADVANTAGES - Made in Italy - 2 grinding units - Unpainted - Used sander, in perfect condition Net price: 72900 PLN Net price: 17357 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: used, Technical specifications: Track width: 300 mm Max. cutting height: 120 mm Max. saw blade diameter: 350 mm Min. saw blade diameter: 200 mm Saw blade speed: 4200 rpm Infinitely adjustable feed rate Automatic lubrication system Nodpfozhumxsx Am Uowk Anti-kickback protection Laser marker Culaga Dust extraction port: 200 mm Safety switch Power supply: 380 V Main motor power: 26 kW Overall dimensions: Length: 2200 mm Width: 1800 mm Height: 1850 mm

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Nwjdpfozc Ilxex Am Ujk

Condition: excellent (used), Catalog number 8036 TECHNICAL DATA max. width of workpiece 1100mm max. height of workpiece 170mm 2 units: – from above: rubber roller, pressure roller, knurled 1) metal roller, knurled, for calibrating rubber roller, pressure roller 2) rubber roller, knurled + sequential shoe + metal roller rubber roller, pressure roller total power of units 15kW -from below: 2 rubber rollers, slip rollers conveyor belt 2 rubber rollers, slip rollers grinding thickness potentiometer belt blowing system pneumatic belt oscillation controlled by photoelectric sensors electric table lifting + manual (for precise adjustment) 2 feed speed types 0.3kW with pneumatic brake working pressure 6-8bar diameter of dust extraction nozzle 2x140mm overall dimensions L/W/H 1840x1650x2000mm weight 1160kg – unpainted – made in Italy – automatic shoe – 2 units – grinding thickness potentiometer – DTR documentation – used grinder, very good condition Net price: 48900 PLN Nwsdjzrnwlepfx Am Ujk Net price: 11640 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), Catalog number 7775 TECHNICAL DATA - roller width 640mm - number of knives 4 pcs - max. thickness of the workpiece 300mm – from top to bottom: - feed rollers - toothed, pulling, and twisting infeed roller - pressure roller - planing roller - pressure roller - 2 smooth, pulling, rubber feed rollers - digital thickness display - motor 5.5kW - electric table lifting 0.7kW - stepless feed rate adjustment 6-20m/min Nwodpfx Aezrlbnem Usk - feed motor 1.1kW - diameter of dust extraction nozzle 150mm - dimensions L/W/H 1000x1400x1200mm - weight 950kg ADVANTAGES - Italian made - electric thickness display - electric table lifting - used thickness planer, very good condition, original DTR documentation, CE Net price: 28500 PLN Net price: 6790 EUR depending on the exchange rate of 4.2 EUR (Prices may change due to significant fluctuations)

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Nedjxw N Sbopfx Am Uswk Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), SCM M3 2/26 multi-blade saw. Nwjdpfx Aezvfwdjm Uek

Condition: used, Year of construction: 1996, Working width: 520 mm Planer shaft: Tersa Number of knives: 4 Jointing table length: 2300 mm Jointing fence angle adjustable: yes Jointing tables folding: pneumatic Maximum thicknesser pass height: 250 mm Thickness table height adjustment: electric Thickness indication: digital Nwedpfx Amey A Hh To Uok Feed speed: 5 / 8 / 12 / 19 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: segmented Table rollers: no Motor power: 5.5 kW Motor brake: yes, automatic Extraction connection: 120 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 980 kg

Condition: excellent (used), Catalogue number 7739 TECHNICAL DATA SURFACE PLANER: - shaft width: 410 mm Nwedjzhu A Tspfx Am Usk - 3-knife cutterblock - sound-dampening comb - shaft guard - adjustable angle guide fence - table length: 2060 mm - both tables adjustable THICKNESSER: - max material thickness on thicknesser: 240 mm - thicknesser shaft guard *from above: - anti-kickback fingers - serrated, sprung feed roller - pressure bars - planing cutterhead - pressure bar - smooth outfeed roller - 2 adjustable rollers in lower table - main motor: 5.5 kW - electric brake - electric table height adjustment (up/down) - dust extraction port diameter: 120 mm - dimensions (L/W/H): 2060x970x1150 mm - weight: 660 kg ADVANTAGES – Italian-made – sound-dampening comb – not repainted – in perfect condition – used planer-thicknesser Net price: 22,900 PLN Net price: 5,450 EUR (calculated at 4.2 PLN/EUR) (Prices may fluctuate with larger exchange rate changes)

Condition: excellent (used), CATALOG NUMBER: 7947 Technical specifications: - Track width: 300 mm - Shaft working width: 300 mm - Max. saw blade diameter: 350 mm - Saw blade bore diameter: 70 mm - Max. cutting height: 120 mm - Table width with extension: 750 mm - Table length: 1540 mm – From above: - Kickback barriers (anti-return block for material) - Metal roller guide Nedpfxjzh Ixbj Am Uowk - Kickback barriers - Metal roller guide - Shaft with saw blades - 2 smooth metal idler rollers – From below: - Guide rail - Kickback barriers - Track (caterpillar) - Central track lubrication - Stepless feed speed adjustment - Feed motor: 1.5 kW - Main motor: 37 kW - Extraction port diameter: 200 mm - Overall dimensions (L/W/H): 1800x1550x1500 mm - Weight: approx. 1700 kg Advantages: – Italian manufacture – Very good condition – DTR technical documentation – Used multirip saw Net price: PLN 33,900 Net price: EUR 8,070 (based on EUR/PLN 4.2) (Prices may change with significant exchange rate fluctuations)

Condition: used, functionality: fully functional, SCM Mini Max FS410 Jointer-Planer Jointer: Working width: 410 mm Total length of tables: 2000 mm Length of infeed table: 1000 mm Cutterhead speed: 5300 rpm Number of knives: 4 HSS knives Maximum cutting depth: 5 mm Fence tilt range: 90°–45° Nwsdpfozqdwfjx Am Uek Planer: Table dimensions: 700 × 410 mm Minimum / maximum working height: 3–230 mm Maximum cutting depth: 5 mm Feed rate: 8 m/min Dust extraction port diameter: 120 mm Motor power: 4 kW Total weight: 435 kg Overall dimensions (W × L): 770 × 2000 mm

Condition: used, machine/vehicle number: 008722, X axis working area: 3050 mm Y axis working area: 900 mm Main Electrospindle power: 5.6 KW Number of controlled axes: 3 axes Nedsztkb Aepfx Am Ujwk Total number of drilling spindles: 14

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Working area X: 3280 mm Nwjdpszwgkbjfx Am Ujk Working area Y: 1250 mm Electrospindle Drilling heads for vertical drilling: 12 Drilling heads for horizontal drilling X: 4 Drilling heads for horizontal drilling Y: 2 Blade for grooving in the X direction 8-position turret tool changer 10-position linear tool changer on the right side 1 additional milling motor with 2 outputs Work table with 6 stops Programming software: Xilog Plus Control panel 1 vacuum pump with a capacity of 90 m3/h Safety guards Approximate weight: 2500 Kg Available starting November 2026

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 80 mm, number of axes: 3, overall weight: 5,200 kg, spindle motor power: 7,500 W, spindle speed (max.): 24,000 rpm, This 3-axis SCM Morbidelli UNIFLEX HP was manufactured in 2014. It features a working area of 3,000 mm in the X-axis and 1,300 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine is equipped with 2 milling spindles and a tool clamping system of HSK-F63. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM Morbidelli UNIFLEX HP machine we have for sale. Contact us for further details. • Number of milling spindles: 2 • Tool clamping system: HSK-F63 • Vertical drill spindles: 96 • Horizontal drills (X/Y): 32 / 4 • CE mark Additional equipment • Barcode reader • Enclosed fence • Light barrier • DXF interface Nwodpozuhcgofx Am Ujk • Software: SCM XILOG PLUS

Condition: ready for operation (used), Year of construction: 2013, This 5-axis SCM Stefani MD HP edgebander was manufactured in 2013. It features a robust steel construction, high-frequency motors, and a "Startouch" control system with a 12" touchscreen. Capable of handling solid wood edges up to 15 mm and rolls up to 3 mm, it includes a pre-milling unit, interchangeable glue pot, and a feed speed of 25 m/min. Consider the opportunity to buy this SCM Stefani MD HP edgebander. Contact us for more information. • Machine maintained and serviced • Edge banding machine for single-sided edge application • Heavy-gauge steel construction • High-frequency motors • Protective hood over all units after the gluing station • Spacer on the rotary control panel • Panel feeding via chain feed • “Startouch” control system with 12" color touchscreen • Solution MD-HP "T-ER4S" version • Capabilities: solid wood edges up to 15 mm; edge rolls up to 3 mm • Feed speed: 25 m/min • Pre-milling unit RT-E (entry spindle with diamond cutters) • Gluing unit VC-S4 / QMS with interchangeable Teflon-coated glue pot Nwsdpfjzug Sgjx Am Uok • iGlue device • EVA pre-fusion • Motor-driven feed rollers, interchangeable (needle roller for solid wood, plastic rollers) • 3 pressure rollers, one motor-driven • Two-motor pressure units: straight and inclined • Anti-adhesive agent spray unit AAR for edge finishing • Scraper and edge scraper unit • Cloth polishing unit Additional equipment • Anti-adhesive and polishing liquids

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 160 mm, number of axes: 5, This 3-axis SCM PRATIX 25 CNC Wood Machining Centre was manufactured in 2015. It features a large working area of 3100x1550 mm, a 5-axis milling head, and dual tool changers with 10 and 16 positions. Equipped with a powerful 16.5 hp motor and a vacuum pump capacity of 100 m³, it supports HSK F63 clamping and Xilog Plus software. If you are looking to get high-quality milling capabilities consider the SCM PRATIX 25 machine we have for sale. Contact us for more information. • 5-axis milling head • Motor: 16.5 hp Nwodszug R Njpfx Am Uok • Lateral tool changer: 10 positions • Turret tool changer: 16 positions • F18 drilling unit with saw in X direction • HSK F63 clamping system Additional equipment • Vacuum pump: 100 m³ • Xilog Plus software

Condition: ready for operation (used), Year of construction: 2017, overall weight: 2,880 kg, This SCM SIGMA PRIMA 67 panel saw was manufactured in 2017. Ideal for precise wood panel cutting, it offers reliable performance for your woodworking projects. Consider the opportunity to buy this SCM SIGMA PRIMA 67 panel saw. Contact us for more information. Nodpfxezug Ine Am Uewk Machine Benefits Technical Machine Benefits • The panel saw is mainly intended for cutting boards sized 2800 x 2070 mm and these are the formats that were typically processed. The working range of the panel saw is 3800 mm on one of the axes. Extra Information Media Electrical specifications: Voltage: 400 V Phases: 3 Nominal current: 22 A Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 4,250 mm, travel distance Y-axis: 2,280 mm, travel distance Z-axis: 150 mm, overall weight: 6,300 kg, spindle motor power: 18,000 W, spindle speed (max.): 24,000 rpm, number of axes: 3, This 3-axis SCM Accord 20 CNC router was manufactured in 2010. It features a working area with dimensions of 4250 mm in the X-axis and 2280 mm in the Y-axis, making it suitable for nesting production and wood processing. The machine includes a powerful electrospindle with a speed range of 600 to 24,000 rpm and a side tool magazine with 10 positions. If you are looking to get high-quality milling capabilities, consider the SCM Accord 20 CNC router we have for sale. Contact us for further details. • Typical applications: nesting production; windows and doors manufacturing; stair components production • Table size (L x W): 4200 x 2300 mm • Controlled axes: 3 (X, Y, Z) • Axis drives: Brushless motors • Rapid traverse: X 75 m/min; Y 75 m/min; Z 15 m/min • Lubrication: Automatic central lubrication system • Work table: Nesting table; large-format multifunctional aluminum matrix; pressed aluminum construction mounted directly to the base; designed for vacuum clamping of large panels • Main spindle: 1 electrospindle, HSK F63 tool holder; 600–24,000 rpm; 11 kW inverter; up to approx. 18 kW in working range (12,000–18,000 rpm); CW/CCW rotation; air cooling with fan; pneumatic tool clamping • Tool changer: Side tool magazine TR-10; 10 positions; 130 mm spacing; max 8 kg per position; automatic tool change • Workpiece clamping: Vacuum (nesting table); 2 vacuum pumps, 250 m³/h each • CNC control: SCM PC control • Software: Xilog Maestro; Xilog Plus; graphic programming editor; DXF import; subprogram and macro management • Electrical: 400 V; 50/60 Hz • Construction: Heavy welded gantry; high-rigidity industrial frame; aluminum matrix table mounted directly to the base Nodpfxszug Hwe Am Uswk • Safety: Fixed safety fencing on two sides; CE marking • History/condition: One owner since new; used continuously in one company; regularly serviced; technical condition very good Additional equipment • Automatic dust extraction hood

Condition: ready for operation (used), Year of construction: 2000, CNC Wood Machining Centre manufactured in 2000. This SCM Windor 60 features multiple vertical profiling spindles and an integrated drilling unit, designed for complex wood profiling and drilling operations. It includes a dedicated window profile machining setup and a multi-station tooling arrangement. If you are looking to get high-quality wood machining capabilities, consider the SCM Windor 60 machine we have for sale. Contact us for further details. • Technical Configuration: • Angular window machining centre • Multiple vertical profiling spindles • Integrated drilling unit • Multi-tool profiling configuration • Freud tooling system installed • Left and right vertical spindle groups • Dedicated window profile machining setup Nwedpfxjzug Eye Am Usk • Complex wood profiling and drilling operations • Multi-station tooling arrangement