Used Scrap for sale (386)

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 20170259471, total length: 22,000 mm, total height: 2,000 mm, total width: 2,000 mm, control cabinet length: 2,400 mm, control cabinet width: 400 mm, warranty duration: 12 months, control cabinet height: 2,200 mm, year of last overhaul: 2025, Side Sealing Machine - Manufacturer: BVM Brunner GmbH & Co. KG - Machine type: Comtex 4G - Machine No.: 20170259471 - Year of manufacture: 2017 - BVM reference no.: 5947 - Voltage, Frequency: 3N 400V, 50Hz - Power specifications: P=18kW, I=26A, F=32AT - Condition: Fully refurbished with warranty Comtex 4G Shipping System: The BVM shipping system ‘Comtex 4G Shipping’ is the complete solution for mailing various items directly to customers, including labeling. Delivery notes, invoices, and goods are packed together in a tightly sealed PE film bag, labeled with the address sticker, and handed directly over to the respective logistics partner. Technical data: - Seal width: 750 mm (transverse), 800 mm (longitudinal) - Product height: up to 250 mm - Capacity: Up to 25 cycles/min* (Special) features: - Special color - Signal control light with three colors to indicate error messages - Pneumatically operated buffer plate and presence control for the film waste tray, enabling tray change during automatic operation (no machine stoppage required). Note: At this station, the Comtex working height is limited to 850 +/- 10 mm. - Electronically controlled sealing bar drive (servo-driven, stepless speed adjustment) - Film end detection by ultrasonic sensor, incl. analog input card (one per film carrier) - Mechanical distribution device for film scrap strips in combination with a large film scrap storage - Individual wire numbering in the control cabinet of the packaging machine for Comtex 3G and 4G - Grooved aluminum profile covered with plastic profile - Bypass conveyor as folding belt integrated in the Comtex downstream of the side sealing station for transferring products out of the machine - Film folding device (no separate control) for converting flat film into center-folded film - Film sealing device for flat films - PN/PN coupler (Profinet coupler) for establishing a Profinet connection - Software development for PN/PN coupling including release connection, interlock and combined fault message - Film end detection at the film mount and film level detection at the film unwinder, detected by photoelectric sensors, including three-color signal lamp and acoustic signal - Mounting preparation for labeler, suitable models on request, installed at the infeed including electrical and pneumatic connections - Sealing bar for producing a wide seal seam with separate cold knife cut, suitable for Comtex 3G, 4G and Compacta with EGS Fedpfx Aaow Ryt Do Nspg - Manual labeling device with linear motion (Model: Caljan Type: FPS BVM L113 L) - Reclosable film bag by means of double-sided adhesive tape in the film bag, incl. tear-off perforation wheel - Additional tear-off perforation wheel, allowing complete removal of the bag’s edge area - Stand-alone control cabinet for Comtex with 5 meter cable - Two sequentially mounted indexing belts (600 x 900 mm/600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with space for installation of a scanner or camera incl. trigger light curtain for scanner - Height adjustment of cross seal for pass-through height 220-250 mm - Cognex scanner system, consisting of: -- Scanner below the infeed for delivery notes -- 2 overhead scanners -- 1 overhead scanner for control +++ Fully refurbished equipment with 12-month warranty according to our attached warranty conditions +++

Condition: good (used), Year of construction: 2017, operating hours: 9,380 h, functionality: fully functional, machine/vehicle number: 4455, Numerically controlled machining center max. panel sizes: 4,000 x 2,300 mm 1 Kuka KR420R3300 robot 1 Kuka KR200L140 robot Fpjdpfx Aer E D Eaoa Neg 1 Kuka KRL140-3Comp robot Conveyor belt for removing the scrap metal Suction Ruwac Zone 22

Condition: used, Year of construction: 2006, operating hours: 4,450 h, functionality: fully functional, overall weight: 19,000 kg, power: 257.42 kW (349.99 HP), fuel type: diesel, color: red, number of blades: 5, motor manufacturer: CAT, motor model: CAT C9, Field of application: waste wood and fresh wood, household and bulky waste, electronic scrap Shafts with 7/7 discs, 5 knives per disc Breaking bar with comb Fsdpfx Aajy Akb Re Nopg Robust hooklift frame Axle unit with drawbar Permanent over-belt magnet Radio remote control

Year of construction: 2023, condition: used, Automatic CNC Cutting Center for PVC – Year 2023 We offer for sale an automatic CNC cutting center with 1 controlled axis, year 2023, designed for high-performance processing of PVC profiles in terms of speed, precision, and cutting quality. The machine is designed to operate fully autonomously, automatically managing all production stages: bar loading, cutting, and unloading of the finished piece, with no need for continuous operator intervention. ⚙️ Main Features - CNC cutting center with 1 controlled axis - Automatic bar loading from integrated magazine - Magazine capacity: up to 10 bars - Maximum bar length: 6,600 mm - Capable of processing short sections from 400 mm - Bar presence detection system 🔪 Cutting Unit - Automatic profile centering system - Ensures high precision - Allows automatic wedge cutting - Fully enclosed cutting area - Front access for maintenance, cleaning, and adjustments 📦 Automation and Piece Handling - Fully automatic cycle: loading → cutting → unloading - Integrated chip and scrap evacuation system - Automatic unloading unit featuring: - collection table - capacity up to 12 pieces - safety photocell Fpjdjyznxkopfx Aa Njg 💻 Software and Integration - Proprietary software developed by Pertici - Optimized management of: - work cycles - cutting lists - Can be interfaced with the main optimization software available on the market ✅ Condition - Year: 2023 - Used machine - Excellent working condition - Always used in a professional environment

Condition: used, Year of construction: 2000, machine/vehicle number: LC574, Technical Specifications & Performance Data This used bottling line is a complete isobaric PET solution engineered for high-volume beverage production of still water, sparkling water, and carbonated soft drinks. Built around robust Krones and Simonazzi process equipment with a Sidel SBO14 S2 blow molder, it offers dependable industrial packaging performance with consistent product quality. Line type: Used isobaric PET complete bottling line (second hand) Nominal speed: up to 18,000 bottles/hour (configured for 2.0 L PET; format-dependent) Bottle formats: 0.10 L and 2.0 L; additional formats possible with change parts Container type: PET (air-conveyed handling) Product range: Water (still and sparkling), CSD Core technology: Isobaric rinsing/filling/capping monoblock with downstream labeling and end-of-line packaging Line composition: Approx. 14 integrated machines including blow molder, air conveyors, rinser, isobaric filler, capper, labeler, packer/shrink wrapper, palletizer, stretch wrapper, inspection and coding modules Main manufacturers: Krones, Simonazzi; blow molder: Sidel SBO14 S2 Years: Main line 2000; blow molder 1999 Condition: Ready for operation; safety features included Advanced Automation & Control Systems Centralized PLC/HMI control coordinates blow molding, rinsing, isobaric filling, capping, labeling, and end-of-line functions. Recipe management supports format and product changeovers, with synchronized conveyors and VFD-driven motors to maintain constant flow at high speed. Line accumulation and defective-bottle rejection are integrated to minimize downtime and scrap. Automation level: Fully integrated, recipe-based operation Operator interface: Intuitive HMI with alarm diagnostics and production reporting Electrical: Industrial 3-phase supply (typical 400–460 V, 50/60 Hz; to be confirmed on inspection) Safety: Interlocked guards, emergency stop network, and category-rated safety circuits Production Line Integration Capabilities Designed for seamless integration across the packaging hall, the line interfaces upstream with preform handling and syrup room/premix systems and downstream with packers, palletizers, and warehouse logistics. Fast format change procedures and clearly defined change parts enable efficient switching between bottle sizes and product SKUs. Compatible with standard beverage production utilities (CIP, CO₂, chilled water) Fjdew D E Ubepfx Aa Nopg Interfaces available for inspection systems, laser/inkjet coding, and vision verification Modular conveyors allow adaptation to plant layouts and future upgrades Machine Condition & Maintenance History This second hand complete bottling line is in ready-for-operation condition with safety protections installed. The equipment has been maintained in a production environment and inspected for functional performance. Maintenance records, documentation, and layout drawings can be made available for review during a technical visit. Operational Performance & Versatil...

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Fjdpfxoyzr Nmo Aa Njpg Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: new, Year of construction: 2026, saw blade diameter: 630 mm, cutting height (max.): 200 mm, cutting range round steel at 90°: 200 mm, saw blade speed: 120 rpm, cutting range square steel at 90°: 170 mm, cutting diameter: 200 mm, rotational speed (min.): 120 rpm, rotational speed (max.): 120 rpm, Equipment: rotational speed infinitely variable, Fully Automatic High-Speed Circular Sawing Machine – CHK-200 Circular sawing machines are industrial cutting solutions used for the high-precision and fast cutting of pipes, profiles, and solid metal materials. They are widely utilized on serial production lines to achieve quick, repeatable, and clean cuts. The CRONOSSTECH CHK Series Fully Automatic High-Speed Circular Sawing Machines deliver high production efficiency thanks to their robust mechanical design and advanced automation system. The PLC-controlled automation system and touch screen operator panel enable easy adjustment of cutting parameters and allow serial cutting operations to be performed with high accuracy. The spheroidal cast iron machine body, powerful gearbox system, and servo-driven feed technology ensure vibration-free operation and extended tool life. CHK Series machines are specifically engineered for the rapid and precise cutting of pipes, profiles, and solid materials. Key Advantages • Fully automatic cutting operation • High-speed circular sawing technology • Servo-driven feeding system • PLC-controlled automation system • High cutting precision and stability • Robust construction for industrial use Fodpfjyq Rk Hex Aa Nspg Fields of Application • Steel service centers • Metal processing facilities • Pipe and profile manufacturers • Machinery manufacturing industry • Automotive and supplier industries Standard Features • Precise cutting and smooth surface finish • Special gearbox design • Automatic lubrication system • Centralized lubrication system • Adjustable vise pressure system • Servo-driven feed system • Automatic loading system • Pallet conveyor system • Electromagnetic braking system • Scrap separation system • Diameter control system • Hydraulic motor-driven chip cleaning brush • Air pressure control system • Easy operation via PLC control unit • Torque control system for extended blade life • Easy adjustment of vise pressure according to material type Technical Specifications – CHK-200 Cutting Capacity (Round): Ø60 – 200 mm Cutting Capacity (Square): Max 180 × 180 mm Cutting Capacity (Rectangular): Max 170 × 210 mm Main Motor Power: 22 kW Hydraulic Motor Power: 5 kW Material Feed Motor Power: 3 kW Circular Saw Blade Size: Ø630 × 2.7 × 3.4 mm Blade Speed Range: 30 – 120 rpm Single Feed Length: 770 mm Bundle Feed Length: 3000 mm Scrap Length: 150 mm Machine Weight: 5500 kg

Condition: new, Year of construction: 2026, saw blade diameter: 460 mm, cutting height (max.): 160 mm, cutting range round steel at 90°: 160 mm, saw blade speed: 120 rpm, cutting range square steel at 90°: 110 mm, cutting diameter: 160 mm, rotational speed (min.): 120 rpm, rotational speed (max.): 120 rpm, Equipment: rotational speed infinitely variable, Fully Automatic High-Speed Circular Saw Machine – CHK-160 Circular saw machines are industrial cutting solutions designed for the high-precision and mass cutting of pipes, profiles, and solid metal materials. They are widely used in serial production lines to achieve fast, repeatable, and clean cuts. The CRONOSSTECH CHK Series Fully Automatic High-Speed Circular Saw Machines deliver high production efficiency thanks to their robust mechanical structure and advanced automation system. Cutting parameters can be easily set via the PLC-controlled automation and touchscreen operator panel, enabling high-precision and serial cutting operations. The ductile cast iron machine body, powerful transmission system, and servo feeding technology ensure vibration-free operation and long tool life. CHK Series machines are engineered for the fast and precise cutting of pipes, profiles, and solid materials. Key Advantages • Fully automatic cutting operation • High-speed circular cutting technology • Servo drive feeding system • PLC-controlled automation system Fodpoyq N Nzsfx Aa Njpg • High cutting precision and stability • Robust machine construction for industrial usage Application Areas • Steel service centers • Metal processing plants • Pipe and profile manufacturers • Machinery manufacturing industry • Automotive and supply industry Standard Features • Precision cutting and smooth surface finish • Special transmission design • Automatic lubrication system • Centralized lubrication system • Adjustable vice pressure system • Servo drive feeding system • Automatic loading system • Pallet conveyor system • Electromagnetic brake system • Scrap separation system • Diameter measuring system • Chip cleaning brush driven by hydromotor • Air pressure control system • User-friendly PLC control unit • Torque control system prolonging blade life • Easy adjustment of vise pressure according to material type Technical Specifications – CHK-160 Cutting Capacity (Round): Ø40 – 160 mm Cutting Capacity (Square): Max 110 × 110 mm Cutting Capacity (Rectangle): Max 140 × 120 mm Main Motor Power: 15 kW Hydraulic Motor Power: 3 kW Material Feed Motor Power: 2.2 kW Circular Blade Size: Ø460 × 2.25 × 2.7 mm Blade Speed Range: 30 – 120 rpm Single Feed Length: 720 mm Bundle Material Feed Length: 3000 mm Trim Length: 60 – 70 mm Machine Weight: 4600 kg

Condition: new, Year of construction: 2026, saw blade diameter: 360 mm, cutting height (max.): 100 mm, cutting range round steel at 90°: 100 mm, saw blade speed: 160 rpm, cutting range square steel at 90°: 75 mm, cutting diameter: 100 mm, rotational speed (min.): 160 rpm, rotational speed (max.): 160 rpm, Equipment: rotational speed infinitely variable, Fully Automatic High-Speed Circular Sawing Machine – CHK-100 Circular sawing machines are industrial cutting machines used for the high-precision and fast cutting of pipes, profiles, and solid metal materials. They are widely utilized in mass production lines to achieve rapid, repeatable, and clean cuts. The CRONOSSTECH CHK Series Fully Automatic High-Speed Circular Sawing Machines deliver high production efficiency thanks to their robust mechanical construction and advanced automation systems. With a PLC-controlled automation system and touchscreen operator panel, cutting parameters can be easily set, enabling highly precise, fully automatic cutting operations. A ductile cast iron machine body, strong transmission system, and servo feed technology ensure vibration-free operation and long tool life. CHK Series machines are engineered for the fast and precise cutting of pipes, profiles, and solid materials. Key Advantages • Fully automatic cutting operation • High-speed circular sawing technology • Servo-driven feed system • PLC-controlled automation system • High cutting accuracy and stability • Heavy-duty machine construction for industrial use Fields of Application • Steel service centers • Metal processing plants • Pipe and profile manufacturers • Machinery manufacturing industry • Automotive and supplier industry Standard Features • Precise cutting and smooth surface finish • Special gearbox design • Automatic lubrication system • Centralized lubrication system • Adjustable vise pressure system • Servo-driven feed system • Automatic loading system • Pallet conveyor system • Electromagnetic brake system • Scrap separation system • Diameter control system • Hydraulic motor-driven chip cleaning brush • Pneumatic pressure control system • User-friendly operation with PLC control unit • Torque control system for extended blade life • Easy adjustment of vise pressure by material type Technical Specifications – CHK-100 Cutting Capacity (Round): Ø25 – 100 mm Cutting Capacity (Square): Max 75 × 75 mm Cutting Capacity (Rectangular): Max 90 × 70 mm Main Motor Power: 11 kW Fedpfeyq N Iwsx Aa Nspg Hydraulic Motor Power: 3 kW Material Feed Motor Power: 2.2 kW Circular Saw Blade Size: Ø360 × 2.25 × 2.6 mm Blade Speed Range: 40 – 160 rpm Single Stroke Feed Length: 630 mm Bundle Material Feed Length: 3000 mm Trim Loss Length: 60 – 70 mm Machine Weight: 3800 kg

Condition: new, Year of construction: 2026, saw blade diameter: 285 mm, cutting height (max.): 80 mm, cutting range round steel at 90°: 80 mm, saw blade speed: 200 rpm, cutting range square steel at 90°: 50 mm, cutting diameter: 80 mm, rotational speed (min.): 200 rpm, rotational speed (max.): 200 rpm, Equipment: rotational speed infinitely variable, Fully Automatic High-Speed Circular Sawing Machine – CHK-80 Circular sawing machines are industrial cutting devices used for high-precision and rapid cutting of pipes, profiles, and solid metal materials. They are particularly favored in mass production lines to achieve fast, repeatable, and clean cuts. The CRONOSSTECH CHK Series Fully Automatic High-Speed Circular Sawing Machines deliver high production efficiency through their robust mechanical structure and advanced automation system. Thanks to the PLC-controlled automation system and touch operator panel, cutting parameters can be easily configured, enabling high-precision batch cutting operations. Featuring a spheroidal cast iron machine body, a powerful transmission system, and servo feed technology, the machine operates vibration-free and prolongs tool life. CHK Series machines are engineered for the rapid and precise cutting of pipes, profiles, and solid materials. Key Advantages • Fully automatic cutting operation • High-speed circular saw cutting technology • Servo-driven feed system • PLC-controlled automation system • Superior cutting precision and stability • Heavy-duty industrial machine construction Typical Applications • Steel service centers • Metal processing plants • Pipe and profile manufacturers • Machinery manufacturing industry • Automotive and sub-industry sectors Standard Features • Precision cutting and smooth surface quality • Special gearbox design • Automatic lubrication system • Centralized lubrication system • Adjustable vice pressure system • Servo-driven feed system • Automatic loading system • Pallet conveyor system • Electromagnetic braking system • Scrap separation system • Diameter control system • Hydraulic motor-driven chip removal brush • Air pressure control system • Easy operation with PLC control unit • Torque control system that extends blade life • Easy adjustment of vice pressure based on material type Technical Specifications – CHK-80 Cutting Capacity (Round): Ø10 – 80 mm Cutting Capacity (Square): Max 50 × 50 mm Cutting Capacity (Rectangular): Max 70 × 50 mm Main Motor Power: 7.5 kW Hydraulic Motor Power: 3 kW Fsdpfx Ajyq N Hmsa Nepg Material Feed Motor Power: 2.2 kW Circular Saw Blade Size: Ø285 × 1.7 × 2 mm Blade Speed Range: 20 – 200 rpm Single Feed Length: 750 mm Bundle Feed Length: 3,000 mm Remnant Length: 60 – 70 mm Machine Weight: 3,050 kg

Condition: excellent (used), 1x Tromp line. Hybrid Line with Rondo dual servo guilllotine, capable of 200 cuts/hr or 80 stamps/min. Fedpey Enwhefx Aa Nopg Comprising of main line pastry cutting marking discs, burgess calibrator with 2 flour dusters, rondo marker, cutter unit, hand crimped cutter and sensor, tromp depositor with stairs, rondo guillotine and cutters and dockers, portable scrap pastry unit, wire belt take off conveyor, 3 chain take off conveyor, hugging conveyor, topping machine with stand, 6 lane forming box, product divider, 2 off drum pastry cutters (foils) 1 off marker unit (chevron) Main panel Tromp (office), Main Panel Rondo, HMI Panel Tromp, HMI panel rondo, 3 off single step stands.

Condition: good (used), Year of construction: 2021, functionality: fully functional, We are offering this HUNDEGGER SC3-200 machining centre, year 2021, in good general condition, for sale due to equipment renewal. PC to be replaced in 2025. Annual servicing carried out by Hundegger. - 1 angle saw with tilting axis - 1 automatic loading system - 1 support for short workpieces - 1 lateral infeed conveyor (2.2 x 7.25 m), 5 arms for raw timber up to 10 m - 1 cut-off scrap conveyor inside the SC3 - 1 outfeed table with 6 rails - 1 additional arm for the infeed conveyor - 1 combined holder for vertical tools - 1 vertical drilling unit 2.2 kW - 1 vertical milling unit 5.5 kW - 1 revolver cutter - 1 rear HP inkjet marking system (150x300 dpi) - 1 4S inkjet system with cartridge heater - 1 automatic small parts ejector including conveyor belt - 1 remote maintenance via modem - 1 safety plate right side - 1 belt conveyor to the left, behind the machine, length 6.0 m - 1 internal piping for micro-dust extraction - 1 steel support under SpeedCut – 140 mm A video of the machine in operation can be provided upon request. Available: July – August 2026 Dismantling, transport, and reassembly are the responsibility of the buyer (dismantling and reassembly by the manufacturer is possible). Fodpfx Aoy A R I Rea Nepg If you have any questions or need further information, feel free to send us a message or give us a call.

Condition: used, mileage: 2,15,000 km, power: 350 kW (475.87 HP), first registration: 05/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, total width: 2,510 mm, total height: 3,960 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal No.: #627 Mercedes Benz Arocs 2848 6x4 Müller Water Recycling Unit Body: Müller Umwelttechnik – Water Recycler “Helicopter” Tank material: S355J2+N (St. 52.3) Total volume approx. 13,000 l Tank split: * approx. 5,000 l sludge * approx. 8,000 l flushing water DISCHARGE: Tank emptied via corresponding discharge system, manhole present HELICOPTER Boom System Original Müller Helicopter boom arm: * Centrally mounted on top of the tank * Telescopic * Integrated suction and jetting hose guidance * Provides comfortable and ergonomic operation * Optimal hose management for sewer cleaning operations * Highly flexible reach with boom system Jetting hose: * 280 m DN 25 (1") Additional hose systems: * Suction hose reel mounted on the tank * Jetting hose reel at the front of the tank * Meter counter included * approx. 60 m rubber hose * approx. 15 m ¾'' rubber hose Chassis Mercedes Benz AROCS Axle configuration 6x2 Engine power approx. 500 HP Emission standard EURO 6 Mileage 214,088 km Fuel tank approx. 500 l Cab color: Orange Features: * Air conditioning * Rear view camera * Warning beacons * LED work lights Max speed: 90 km/h Vacuum system CVS VacuStar WR 3100 Capacity approx. 3,100 m³/h Pump type: water ring pump Driven via vehicle engine PTO Functions: * Sludge water can be displaced via suction hose * Water chamber can be filled via suction hose * Suction hose mount available High-pressure system URACA P3-45 Capacity: approx. 348 l/min at 250 bar Special features Original Müller Helicopter boom system, radio remote control, display control, equipment cabinets on both sides with roller shutters, hose trays, toolbox, vice, hand wash station, sound insulation for pump compartment, stainless steel waste bin/scrap box, LED work lights (2 per side), warning beacons, rear view camera, advertising boards left and right on the tank Technical data Gross vehicle weight: 21,090 kg Length: 9,890 mm Width: 2,510 mm Height: 3,960 mm Fedpfsy Ac Ivsx Aa Nepg For more detailed information and/or images, please contact us directly. A wide range of other vehicles for SALE or RENT can be found at: Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale exclusively according to our T&Cs and excluding any warranty.

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC Fsdpfx Aov Iflpsa Nopg This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher

Condition: new, Year of construction: 2026, RA-800 ASPHALT RECYCLER A portable asphalt recycling plant / recycler RA-800 from TICAB with its own engine and hydraulic drive produces 800 kg of high-quality asphalt mixture for every 20-30 minutes from asphalt scrap, milling, bitumen, crushed stone, sand. It also allows you to warm up the material and work with it within the area of laying or replacing asphalt. Equipment is ideal for emergency road repairs. Technical Specifications: ● Diesel engine with electric starter (10hp). ● Recycler productivity - 1800 - 2500 kg/hour. ● Drum capacity 800 kg (0,6 m3). Fpjdpfx Aet Ifxlja Nsg ● Product heating temperature - 120 – 160 °C. ● Product heating time up to 15-20m (160°C). ● Fuel tank for 100 l (equipped with a fuel level indicator). ● Power of burner 100-130 KW. ● Burner diesel powered by a generator with a voltage stabilization system. ● The recycler drum is equipped with a heating distribution system (on the whole surface). ● Side flaps construction provides light access to servicing drum rollers. ● Control panel with indicators and at least one 220V power outlet on this panel (can be used for charging tools or lighting). ● Control panel, power block equipped with locks protection.

Condition: new, functionality: fully functional, Year of construction: 2026, RA-800 ASPHALT RECYCLER A portable asphalt recycling plant / recycler RA-800 from TICAB with its own engine and hydraulic drive produces 800 kg of high-quality asphalt mixture for every 20-30 minutes from asphalt scrap, milling, bitumen, crushed stone, sand. It also allows you to warm up the material and work with it within the area of laying or replacing asphalt. Equipment is ideal for emergency road repairs. Technical Specifications: ● Diesel engine with electric starter (10hp). Gj Det Ifxlsrt Hazouk ● Recycler productivity - 1800 - 2500 kg/hour. ● Drum capacity 800 kg (0,6 m3). ● Product heating temperature - 120 – 160 °C. ● Product heating time up to 15-20m (160°C). ● Fuel tank for 100 l (equipped with a fuel level indicator). Fpedet If A Dspfx Aa Neg ● Power of burner 100-130 KW. ● Burner diesel powered by a generator with a voltage stabilization system. ● The recycler drum is equipped with a heating distribution system (on the whole surface). ● Side flaps construction provides light access to servicing drum rollers. ● Control panel with indicators and at least one 220V power outlet on this panel (can be used for charging tools or lighting). ● Control panel, power block equipped with locks protection.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: 27042010, TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair of asphalt concrete surfaces. A portable asphalt recycling plant / recycler RA-800 from TICAB with its own engine and hydraulic drive produces 800 kg of high-quality asphalt mixture for every 20-30 minutes from asphalt scrap, milling, bitumen, crushed stone, sand. It also allows you to warm up the material and work with it within the area of laying or replacing asphalt. Equipment is ideal for emergency road repairs. Technical Specifications: ● Diesel engine with electric starter (10hp). ● Recycler productivity - 1800 - 2500 kg/hour. ● Drum capacity 800 kg (0,6 m3). ● Product heating temperature - 120 – 160 °C. ● Product heating time up to 15-20m (160°C). ● Fuel tank for 100 l (equipped with a fuel level indicator). Fpjdpfx Asvrw Anja Nog ● Power of burner 100-130 KW. ● Burner diesel powered by a generator with a voltage stabilization system. ● The recycler drum is equipped with a heating distribution system (on the whole surface). ● Side flaps construction provides light access to servicing drum rollers. ● Control panel with indicators and at least one 220V power outlet on this panel (can be used for charging tools or lighting). ● Control panel, power block equipped with locks protection

Condition: like new (used), Year of construction: 2015, operating hours: 10 h, functionality: fully functional, Tray Sealing Machine Model: ILPRA FOODPACK 400 N (sold together with 5,000 trays and the corresponding sealing film) Machine for cutting and heat-sealing with metallized film, compatible with pre-formed trays made of plastic, aluminium, and/or laminated cardboard. Tray dimensions: max. 280 x 32 h mm (in a single row). Mechanical operating speed: approximately 400 cycles/hour, depending on the type of material used and the characteristics of the product to be packed. Operation with vacuum and inert gas injection at a speed dependent on the vacuum level (4 cycles per minute). OPERATION AND DESCRIPTION: The FOODPACK 400N is a practical, robustly constructed machine. The conveyor movement and the unwind–rewind system are mechanically driven, and the sealing plate is pneumatically operated. The machine is controlled by a programmable logic controller (PLC). The construction of the FOODPACK 400N considers the special humidity conditions in the operating area. All parts that come into contact with the product, such as the work surface and housing, are made of stainless steel (S/S). Switchover to another tray format takes approximately 5 minutes. MACHINE SECTIONS: Tray loading section: The loader consists of guides for the trays (the guides are designed to correctly position the filled trays). After placing the tray in place, the operator advances it into the sealing area by pressing a lever. (A presence sensor permits successive operations only if the tray is correctly positioned.) After the heat-sealing operation, the operator must return the tray holder to the loading position, remove the sealed tray, and load the next tray for subsequent sealing. Film unwinding and rewinding group: This group automatically positions the required length of sealing film—drawn from the reel—under the sealing and cutting unit, and rewinds the scrap. This group can be fitted with a date coding device for printing manufacturing/expiry dates. Optionally, a centering device allows for accurate alignment of the printed image in the centre of the metallized film covering the tray. Sealing and cutting section: In this group, the film is cut and sealed onto the tray (the cut matches the exact shape of the tray). Once the tray is positioned in the sealing area, the operator presses the START button to carry out the sealing and cutting operation. Both the upper and lower dies are manufactured according to the user-selected tray characteristics, and require a high degree of customization. The sealing plate is electronically timed, and each operation requires individual temperature adjustment. The section is equipped with a quick-change die system: releasing or securing the upper die can be done simply by turning a selector key on the control panel. Control panel: Fpjdpfx Aajwxlqlo Njg Equipped with a temperature controller for sealing temperature adjustment, a timer for sealing time, and a keypad with display for controlling machine functions, as well as START and EMERGENCY STOP buttons, main switch, and quick die-change selector. Section sequence: - Stainless steel (S/S) base. - Manual loading/unloading station. - Automatic film unwinding/rewinding system. - Sealing/cutting station. - Control panel.

Condition: like new (used), Year of construction: 2023, operating hours: 28 h, functionality: fully functional, machine/vehicle number: 2380029, total height: 2,600 mm, total width: 1,500 mm, total length: 3,410 mm, overall weight: 4,200 kg, rotor diameter: 330 mm, type of input current: AC, rotor length: 800 mm, power: 30 kW (40.79 HP), Function: The input material is drawn in by two slowly counter-rotating shafts (resulting in dust- and noise-free operation), onto which cutter discs are mounted. This process is monitored by an intelligent and innovative PLC control system. In the event of overload or the presence of foreign objects in the cutting unit, the control system reverses the direction of rotation. The precise cutting gap between the discs enables energy-efficient shredding of the material. The attached scraper comb prevents material from wrapping around or being pulled up into the cutters. The width of the cutters and the number of cutting edges determine the output particle size. Possible applications: Thanks to its robust construction and design for long service life, this machine can shred, economically, not only special waste, metal chips, electronic scrap, and steel drums, but also all kinds of containers filled with liquids. Fpsdpfxeyw N Acs Aa Neg All types of industrial waste, metal and plastic containers Production waste, file folders, paper, cardboard Electronic scrap, electric cables, metal shavings Food, kitchen waste, biogenic waste, wood Glass, plastics, various containers filled with liquids, etc.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 372, total width: 3,750 mm, total length: 10,600 mm, total height: 2,700 mm, power of vacuum pump: 5 W, heating capacity: 100 kW (135.96 HP), compressed air connection: 7 bar, Equipment: documentation/manual, 1 Used WM FC 780E roll fed thermo forming line, with KVH 83 Pre Heater, fully operational, can be seen in production. Currently used for PP & RPET tray forming, typically Food Packaging the machine is used daily and produces great quality products. Therefore it is maintained to V high standard with all WM spare parts, any remaining spares will be included with this line, Toggles, Chains, etc. Price includes Pre Heater for processing PP, Spares & Loading on to your transport. Following a new line now installed Jan 2026, this WM line is available immediately. WM 780E s/n 372 yr. 2008 UNWINDER Max. reel diameter (mm) 1.200 THERMOFORMING MACHINE Max. tool size (mm) 780* x 570 Max. tool size with pneumatic clamp frame (mm) 750 x 570 Max. pos/neg depth (mm) 130/130 Fedpfx Aaox Uym Hj Nopg Max. sheet width (mm) 810 Max. sheet indexing (mm) 570 Clamping force (daN) 30.000 Upper/Lower heating, installed power (Kw) 50/50 CUTTING PRESS Max. cut dimensions (mm) 760 x 550 Platen clamping force (daN) 60.000 Upper/Lower platen stroke (mm) 150/150 steel rule heating plate (Kw) 7,8 VERTICAL STACKER Max. stacking dimensions (mm) 760 x 550 SCRAP WINDER Max. scrap roll diameter (mm) 600

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine includes a vacuum system, a conveyor belt for chip removal, and a liquid cooling unit. If you are looking to get high-quality CNC machining capabilities, consider the Biesse Rover C9.50 machine we have for sale. Contact us for more information. Worktable and clamping • 8 ATS plate holders (L = 1525 mm) and 24 slide rails • Automatic positioning of plate holders and slide rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system • 4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules)Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum systemMachining units and configuration • Composition C3-A1: Fodpfx Aasx D H Hcs Nspg • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a work unit with 5 interpolating axes (units usable only when the electric spindle is vertical) • Composition C3-P2: • Additional Z slide for rear work units, controlled by an independent Z axis • 16 vertical and 4 horizontal boring spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle)Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • additional refurbished 5-axe main spindel available • Conveyor belt for removing chips and scrap pieces (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles, or one electric spindle plus one liquid-cooled drilling head)Note: The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding.

Year of construction: 2014, condition: used, No. 10018 Mobile 2-fraction spiral shaft screen GÜNTHER / Doppstadt SPLITTER F2 Used, year of construction 2014 Fjdswhza Ujpfx Aa Nepg Approx. 3000 operating hours Incl. mobile deck 0/120 Screening of materials that are difficult to screen, such as commercial waste, bulky waste, mixed construction waste, scrap metal, slag, waste wood, organic waste, landfill deconstruction in 2 fractions - Drive: Generator type 50 kVA / voltage 400/230 V / frequency 50 Hz / speed 1500 rpm / fuel tank capacity 250 liters / diesel fuel - Feed hopper: length 2700 mm / width 2100 mm / loading volume 3 m³ - SPLITTER screen deck / spiral shaft deck AA 254: Length 6000 mm / width 2500 mm / drive 3 x 4.0 kW controlled via frequency converter / 180 mm pitch / separating cut 0-80/120 mm - Feeder belt FH: Length 3000 mm / Width 1200 mm / Drive 1 x 4.0 kW controlled via frequency inverter / Folded design, incl. hopper for receiving the discharge belt on the shredder / Chevron belt quality - Bottom grain collecting belt, longitudinal FC: Length 5600 mm / Width 1200 mm / Drive 1 x 3.0 kW / Permanent magnetic separation / Chevron 16 mm belt quality - Bottom grain collecting belt crosswise FC: length 1600 mm / width 1000 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile undersize discharge conveyor: length 4460 mm / width 1000 mm / drive 1 x 4.0 kW / can be extended by FE fraction / belt quality Chevron 16 mm - Oversize grain collecting belt FC: length 5300 mm / width 1200 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile oversize grain discharge conveyor: length 7350 mm / width 1700 mm / drive 1 x 5.5 kW / can be extended by FE fraction / discharge height 5000 mm - Control cabinet: Complete electrical control via a PLC in a central control cabinet (protection class IP55) / Control and visualization via Siemens S7 colour touch panel / Radio remote control with colour display for all travel and work functions - Mobility: Electric crawler/tracked chassis with rubber pads / Electro-hydraulic control of moving parts - Power generator: 50 kVA, water-cooled 4-cylinder diesel engine - Throughput: up to 60 t/h (depending on material) Transport dimensions approx. 13600 x 3000 x 3100 mm LWH Weight approx. 21000 kg Sold on behalf of the customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Errors in the description and price reserved Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: good (used), Year of construction: 2004, functionality: fully functional, Manufacturer: HABERMEHL Anlagenbau GmbH Address: Hauptstr.1, 35510 Butzbach-Ebersgöns, Germany Type: EH 400/1 Serial number: 901 Year of manufacture: 2004 Voltage / Frequency: 400 V / 50 Hz Fpsdpfsw Niuhsx Aa Njg Rated power: 3 kW CE-certified: Yes 🛠️ Device Description Industrial shredder or crusher (Shredder/Granulator). Notable features visible in the photos: - System with rotating knives (shredding unit) on a 2 mm shaft - 3 kW SEW motor and reduction gearbox - 8 mm screen (the screen is labeled “8 mm Sieb”) – determines the output particle size - Rollable, portable design - Material discharge container and lower motor drive system Machines of this type are typically used for shredding the following materials: - Plastics - Rubber - Wood - Light metal chips - Electronic scrap 📝 Technical information you should request If you require further details, you may request the following information from the supplier or manufacturer:

Condition: used, mileage: 3,448 km, first registration: 05/2009, | Scrap shear Bonfiglioli Squalo 1500 | Length 8340mm | Width 2550mm | Height 3156mm | Weight 56 tons | Automatic cycle (per minute) 45 seconds (standard) | Processing capacity (tons/hour) Up to 15 tons per hour | Inner box width 2,250 mm | Total shear and compression force (tons) 1,500 tons | Shortest cutting length | Adjustable cutting lengths | Maximum cutting density and shape 375 mm 375/580/780/980 mm 253 mm (round) 225 mm (square) | Errors, input and advance sales reserved. Fedpfet Ef Nrsx Aa Nspg

Year of construction: 1994, condition: good (used), electromechanical sheet metal shears brand RAS type 83.20. Year of manufacture 1994. Cutting length 2040mm up to 3mm thickness Digital measurement of the rear stop 790mm. Fedpfx Aasyiaits Njpg Sheet metal holder along the entire length - repair (adjustment) required. Rear pneumatic supports. Power 5.5 KW weight 2050kg.