Used Scrap for sale (1,264)

Condition: ready for operation (used), Year of construction: 2011, Additional Equipment Kodpoxpkvfofx Aabjnc Joint trimming unit Gluing unit Snipping unit Pre-milling unit Shaping trimming unit Profile scraper blades Surface scraper blades Buffing unit Grooving unit This BRANDT KDF 890 2CU edgebander was manufactured in 2011. It features a joint trimming unit, gluing unit, snipping unit, pre-milling unit, shaping trimming unit, profile scraper blades, surface scraper blades, buffing unit, and grooving unit. Consider the opportunity to buy this BRANDT KDF 890 2CU edgebander. Contact us for more information. Application Types Edge Banding

Condition: good (used), Year of construction: 2020, operating hours: 5,800 h, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, torque: 1,146 Nm, controller manufacturer: Siemens, controller model: 840D SL, workpiece height (max.): 1,400 mm, workpiece weight (max.): 2,000 kg, rotational speed (max.): 8,000 rpm, Machine name / type: HELLER / H 8000 Operating hours: 5800 Year of construction: 2020 Kjdpfx Asu Urgbsabenc Control unit: Siemens 840D SL Spindle: EPC-Unit (8.000 1/min, 60 kW, 1146 Nm) Tool clamping system: SK 50 Tool magazine / places: Rack / 265 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 600, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 1250 / 1200 / 1100 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additonal options / Specifics: multi-spindle-head support (MSK); receiver for measuring probe (RENISHAW); fast drill fracture sensing (SBBK); interface exhaust system; screen blow-off device for operator door; codechip; Chip conveyor function check; Integrated process monitoring (IPM) + Monitoring function to minimize machine damage in case of collision; 3 colour status lamp; increased tool weight 35kg; scraping conveyor for wet machining; Coolant temperature control; Feed force display; Tangential control;

Condition: like new (used), Year of construction: 2019, I sell the edge banding machine Biesse Akron 1440A Year 2019. Configuration: Entry fence servomotoric adjustable Premilling pneumatic adjustable Edge banding servomotoric adjustable / 2 glue tanks for EVA and PUR glue Pressure zone manual adjustable End cutting saw pneumatic adjustable Tilting radius milling servomotoric adjustable Corner rounding unit 2-motor servomotoric adjustable Radius scrapers servomotoric adjustable Glue scrapers pneumatic adjustable Polishing brushes with spraying Hot air fan Separation fluid spraying front Knsdpfxsw Rl Ute Aabec Central lubrication system Top feeding rolls Height adjustment servomotoric PUR glue possible 2nd set of premilling heads included in price Material height 10-60 mm Edge thickness 0,4-12,0 mm Feeding speed 18 m/min. Only 360.000 meters edgebanded. CE Mark. Including full documentation and CDs. Very good condition ! Available immediately !

Condition: used, Year of construction: 2019, operating hours: 6,680 h, functionality: fully functional, overall weight: 19,000 kg, power: 390 kW (530.25 HP), Equipment: Knedpfx Aow Swpfjabjc Basic Package AK560 Eco-Power: - Central axle trailer chassis with 2 axles, 80 km/h road approval - Brake system incl. ABS and lighting according to EC directive - 50 mm EC towing eye with bolt-on shoe - Tyres 385/65 R22.5 - Hydraulically adjustable support leg - Splash guards (inner and side-mounted mudguards) - Permissible total weight 19,000 kg - Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, meets EUROMOT IV emission standard - Load-dependent feed control incl. automatic reversing scraper floor - Fuel tank 450 litres - Feed roller: length 1,690 mm, diameter 510 mm, fitted with tooth segments - Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Standard: "Streusel" flail tip - Centrally positioned lubrication strips - Electric pump for operating cylinder functions (e.g. raising/lowering support foot and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when engine is off - 24 V electric control system - Separate control box at the rear of the machine - Hydraulically folding fine shredding basket (mesh size between 30 - 280 mm, graded on request) incl. tailgate - Scraper floor with 32 slats - Complete remote radio control - Preparation for travel drive - Acoustic start-up warning - Paint finish: RAL2011 deep orange Optional Equipment: - Hydraulic travel drive - Drawbar extension 400 mm - Fuel tank 600 l - Additional hydraulic connection 20 l/min - Flail tip C1 bear paw with tungsten carbide - Fine shredding basket - Impact plate with strike bar - Rear conveyor 4 m - Separate drive for feed roller/scraper floor "Twin Drive" - Reinforcement plates in the loading hopper

Condition: used, Year of construction: 2008, operating hours: 40,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, Working well located in Israel ready for inspect spindle hours 42000 in very good condition . Need make METI NC SYSTEM FS-18IMB(MAPPS 3) CRT SIZE (INCH) 15 INCH CUSTOMER FACTORY VOLTAGE (V) 380 V - 480 V FREQUENCY (HZ) 50 HZ SETTING UNIT MM EXPORT TRADE CONTROL ORDER APPLIED RELOCATED MACHINE SECURITY FUNCTION VALID PAINT COLOR COOL SILVER LANGUAGE ON NAME PLATES ENGLISH LANGUAGE OF INSTRUCTION MANUAL ENGLISH LANGUAGE OF MACHINE MANUAL ENGLISH X-AXIS TRAVEL (MM) 2050 MM Z-AXIS TRAVEL (MM) 600 MM SPINDLE (SPINDLE 1) SPEED (MIN-1) 12000 MIN-1 SPINDLE HOLE TAPER TAPER NO. 40 SPINDLE HOLE TAPER (#40) 7/24 TAPER #40 GRIP STANDARD (#40) MAS RETENTION KNOB STANDARD (#40) 90 DEGREE TOOL STORAGE CAPACITY 40 CHIP CONVEYOR OUTSIDE MACHINE PROVIDED TYPE OF CHIP CONVEYOR OUTSIDE MACHINE SCRAPER (DRUM FILTER TYPE) CHIP CONVEYOR INSIDE MACHINE PROVIDED COOLANT TANK 800 L COOLANT WATER-SOLUBLE COOLANT IN-MACHINE WORK MEASURING SYSTEM (SPINDLE) OPTICAL TYPE PROBE SENSOR (RENISHAW) IN-MACHINE WORK MEASURING SYSTEM (TABLE) ﾀｯﾁｾﾝｻ･MP4(ﾚﾆｼｮｰ) ADDITIONAL AXIS INTERFACE 付加2軸 MOTOR FOR ADDITIONAL AXIS USER ROTARY TABLE FOR ADDITIONAL AXIS USER ROTARY TABLE TYPE 回転軸､傾斜軸共 STEP-DOWN TRANSFORMER PROVIDED STEP-DOWN TRANSFORMER CABLE PROVIDED LANGUAGE ON NC SCREEN ENGLISH LANGUAGE ON PC SCREEN ENGLISH LANGUAGE ON WARNING SCREEN ENGLISH LANGUAGE ON MAPPS2/3/4 SCREEN ENGLISH PART PROGRAM STORAGE (M) 1280 M NUMBER OF STORED PROGRAMS 63 USER MEMORY AREA(BUILT-IN MAPPS) 50 MB NUMBER OF TOOL OFFSET PAIRS 64 NUMBER OF WORK COORDINATE SYSTEM PAIRS 6 NUMBER OF CUSTOM MACRO COMMON VARIABLES 82 AI NANO HIGH PRECISION CONTOUR CONTROL PROVIDED LOAD MONITOR C (SOFT-KEY TYPE) Kodpsw Tutwsfx Aabonc

Condition: used, Holz Her UNO 1303 + PU Kjdpfx Aaexlz Nzjbonc Edge thickness 0.4 - 3 mm (6 mm) Control panel with selector switches for aggregate setting Fully automatic edge magazine for both rolls and strips Glue application station: Cartridge + PU gluing Workpiece height 6-55 mm Pneumatic pressure unit End trimming unit for rolls and strips up to 3 mm (6 mm) edge thickness With adjustable mitering of trimming saws from 0-10° Milling unit for flush milling, radius milling, and chamfer milling - 15° Scraper unit for chamfers and radii Surface scraper unit - finishing Machine is TESTED and in TOP CONDITION from a very well-maintained craft shop Available ex-stock Lieboch at INVENTORY CLEARANCE FIXED NET PRICE €8,900.00

Condition: good (used), Code: 0680 Brand: BIESSE Model: AKRON 430/AT - CE Standard Automatic edge bander with grinding unit for edgebanding solid wood, chipboard, veneer, Pvc, Abs and melamine panels - CE Standard - Year 2009 Technical data: Panel height mm 10/60 Edge thickness max mm 10 Panel length min mm 140 Panel width min mm 85 Belt feed speed 12 mt/min Electronic control panel with USB port for data loading - Sintra software Ksdpfx Aaoxn Nwrsbenc Grinding unit for panel grinding -N° 2 motors each Hp 2,4 rpm 12000 Tools diameter mm 80 F30 H75 Slide copying devices N° 2 suction nozzles diameter mm 60 Gluing unit Interchangeable glue pot Glue pot capacity kg 2 Glue spreader roller diameter mm 25 Pressure roller conveyor large roller diameter 100 mm Pressure roller conveyor small rollers diameter mm 80 End cutting unit: for cutting excess front and rear edges N° 2 motors each Hp 1,07 12000 rpm Motor inclination 0-15 degrees Max tooling mm 140 Slide copying devices N° 2 suction nozzles diameter mm 80 Finishing trimming unit for chamfering the excess edge in the top and bottom corners of the panel N° 2 motors each 0,87 Hp 12000 rpm Motor inclination from 0 to 25 degrees Tool diameter 70 mm F16 height 20 mm Vertical and frontal copying devices with rotating discs Height adjustment: automatic with the upper pressure unit N° 2 suction nozzles diameter mm 80 Edge scraper unit for edge finishing in Abs Radial plate tool Vertical and frontal copyng devices with rotating discs N° 2 suction nozzles diameter mm 60 Glue scraper unit for removing glue residues Vertical copying devices with rotating discs N° 2 suction nozzles diameter mm 60 Removable support for panel support N° 5 suction nozzles diameter 100 mm Compressed air bar 7 Overall dimensions mm 3900 x 1000 x 1600 h Weight kg 1530

Condition: good (used), Year of construction: 2019, operating hours: 1,994 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Fanuc, controller model: Fanuc 31i-B, spindle speed (max.): 10,000 rpm, number of spindles: 1, mount diameter: 100 mm, Operating hours: 7194 / usage time: 1994 Year of construction: 2019 Control unit: Fanuc 31i-B Spindle: PC100i (10.000 1/min) Tool clamping system: HSK 100 Tool magazine / places (Options): Chain/50 Rotary table: 360.000° X 0,001° Knedpfxsvvmnus Aabsc Coolant unit: KNOLL, KF 400, IKZ 70 bar Positioning range XYZ (mm): 1000 / 1000 / 1000 Pallet size (mm): 630 X 630 Workpiece clamping: Hydraulic 80 bar Additonal options, Specifics: HELLER facing slide unit; Receiver for measuring probe (RENISHAW); Coolant temperature control; forward looking collision avoidance; Interface for exhaust system; 3 colour status lamp; work area flush; Scraping conveyor for wet machining; Fast drill fracture sensing (SBBK); multi-spindle-head support (MSK); Thermal growth compensation; Feed force display; Automatic loading sequence; Automatic unloading sequence; increased tool weight 35kg; tool codechip; Since response emails from Maschinensucher often end up in the spam folder, we kindly ask you to regularly check this folder or contact us directly.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, Machineseeker – Trumpf TubeLaser 3000 – Ebertz Under 3,000 Laser Hours Fiber Tube Laser – Immediately Available Manufacturer: TRUMPF Model: TruLaser Tube 3000 fiber (T10) Year of Manufacture: 2020 Machine Number: A044D0013 Operating hours, approx.: 2,750 h (Laser on) TECHNICAL DATA: Max. outer diameter round tube: 152 mm (170 mm with jaw set) Max. circumscribed diameter rectangular tube: 170 mm Max. raw material length for automatic loading: 6,500 mm Machine bed for 6.5 m raw material length Max. finished part length: 4,500 mm Max. workpiece weight per meter: 18.5 kg (120 | 148[3] kg total) Laser: TruFiber 2001 – 2 kW (average power consumption 6 kW) Max. material thickness: - Mild steel: 8 mm - Stainless steel: 4 mm - Aluminum: 4 mm - Copper/Brass: 3 mm EQUIPMENT: - Through-feed chuck with self-centering clamping rollers - Workspace lighting - Feed station with self-centering jaws - Tube support (raw material) with automatically retractable rests - Tube support (finished parts) with extendable guide rollers - High-precision drives - Adaptive clamping technology for through-feed chuck - Eject station for 3 m finished part length (including scrap container) - Parts storage tray TRUMPF Laser • Excitation via pump diodes • Laser power control • Logbook function for laser • Enclosed beam guidance via laser light cable (LLK) Cutting Head • Lens cutting head with 150 mm focal length • Magnetic coupling Controller • TRUMPF controller based on Sinumerik 840D SL • Integrated technology data • Automatic on/off function • Tiltable operator panel with 19" touchscreen • Condition Guide • Remote support interface • Programmable cutting gas pressure Functions • AdjustiLine • NitroLine • FocusLine • ControlLine Data Transfer - Online Update Manager - RJ45 network interface - USB interface - Wireless Operation Point - Central Link Safety - CE Marking (ex works) - Single and dual beam safety light curtains - Monitoring system for gas pressure, temperature, and cooling water - Protective cabin with laser safety windows EXTENDED STANDARD EQUIPMENT: • Solid-state laser TruFiber 2001 • Machine bed for 6.5 m raw material length • LoadMaster Tube for 6.5 m raw material length • Laser chiller (water-air) • Compact exhaust system Machine Accessories • Initial set of cutting nozzles Kodpfoxn Tn Iex Aabenc • Ceramic part (1 piece) • Jaw set up to D152 mm/D170 mm • Guide rollers for round and rectangular tubes SPECIAL EQUIPMENT: - Increased finished part length (+1.5 m) including additional finished part support - SeamLine Tube with inner detection, weld seam detection on both inner and outer tube surfaces - Low-scratch LoadMaster Tube design, plastic rollers and strips - Adaptive clamping technology – feed station with additional clamping elements for clamping L and U profiles as well as flat material - MobileControl App This used machine can be viewed under production conditions. All information provided without guarantee – sale excluding any warranties or liability and exclusively in accordance with our General Terms and Conditions of Sale and Contract. Subject to prior sale.

Condition: used, Year of construction: 2012, Basic machine Olimpic K 800 "T-ERL" (47) 1 pc. BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal work unit support - Pivoting control panel - Support roller conveyor with ball bushing guides along the entire machine length - Protective and sound-absorbing hood with separate doors between the gluing and finishing units - Extractor nozzles located on the sound-absorbing hood - Electrical system with lockable main switch - Emergency/stop buttons at the inlet and outlet - Inverter for electric spindles. PLATE FEED SYSTEM - Feed chain with rubber glide shoes, mounted on a 1 1/4-inch industrial chain with a high friction coefficient - The chain slides on two guides made of hardened and ground steel, one round and one flat, to guarantee straight feed and protect against lateral misalignment. --- Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction. Complete with double rows of bearing rollers and protective device for the printing rollers - manual lifting of the printing unit with automatic working unit positioning when changing the plate thickness - mech. Digital display for checking the selected panel thickness. ORION 100 CONTROL SYSTEM. Control device complete with PLC, allows fast, easy, and error-free execution of custom processing programs (max. 60 programs). Manages the pneumatic positioning of the units, if present on the machine. (The control system does not include pneumatic positioning). - Alphanumeric keyboard and display - Function keys for quick control of the processing units - Ambient temperature range from 0 to +45° C. MAIN FUNCTIONS - Control of the processing units and automatic activation of the motors - Control and regulation of the glue pot temperature - Selection of longitudinal and transverse processing without program change - Simple and guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: number of pieces, edge consumption, total chain feed distance - Unit of measurement selectable in mm or inches. Technical data OLIMPIC K800 T-ER L Edge thickness: 0.4 to 8 mm Max. gluing thickness of the roll edge: 3 mmFeed speed: 12/18 m/minWorking height: 8 to 60 mmMax. dimensions of the edge cut: 135 mm²Turntable diameter: 780 mmMax. oversize compared to the panel thickness: 4 (2+2) mmMin. panel width (with 210 mm min. length): 55 mmMin. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mmMin. distance between consecutive panels at 11 (16) m/min: 750 (850) Standard equipment - Pre-milling unit in the infeed RT-E- Gluing station VC-800- Trimming unit KSEL- Flush trimming unit, tiltable RI/800- Rounding unit ROUND K- Scraper unit RAS-V- ½ free space for surface scraper- 1 S free space for surface scraper or Universal milling or buffing unit - 1 free space for air nozzle unit. European safety regulations (C.E. mark). 1 unit. Voltage 400 EU. 1 unit. Frequency 50 Hz. 1 unit. "Autoset" for ER2, T-ERS, and T-ERL models. 1 unit. Allows all necessary adjustments to be made from the control panel for each machining change. Includes: - time-controlled pressure unit - pneumatic and independent pivoting of the mitre saw blades (front/rear) - pneumatic remote adjustment for the RI/800 flush trimming unit. Knsdjxnlbyopfx Aabjc

Condition: used, Year of construction: 2023, functionality: fully functional, turning length: 1,500 mm, turning diameter: 500 mm, spindle bore: 80 mm, travel distance Y-axis: 260 mm, • Fanuc 31i-B5 control • 15 inch LCD color screen • Y-axis 260 mm (+/- 130 mm) • B-axis swivel range 230° (+/- 115°) • Milling spindle drive power 15/22 kW • Milling spindle speed max. 12,000 rpm • Main spindle drive power 22/26 kW • Speed 4,000 rpm • Spindle nose A2-8 • Bar capacity main spindle 80 mm • Counter spindle drive power 15/22 kW • Speed 4,000 rpm • Spindle nose A2-8 • Direct position measuring systems X1, Y1, Z1-axis • 12-position turret Knodswpkp Iepfx Aabec • Milling spindle with B-axis • Y-axis • HOWA clamping cylinder and chuck (L) • HOWA clamping cylinder and chuck (R) • 2 C-axes incl. disc brake • M-function open/close chuck • Chuck foot switch • Coolant system with 4 pumps • Automatic central lubrication • Automatic machine shut-off • Hinge belt conveyor right side • LED work area lighting • 1 set machine documentation • CE specification FANUC 19" HMI Touch Panel iH Pro instead of the 15" standard screen HMI touch panel from Tool holder: Capto C6 Number of slots: 80 pieces Tool monitoring system Raku Raku 1. Tool management 2. Load monitoring 3. Compensation management 4. Operating information KITAGAWA power chuck 3-jaw BB210 • Passage 81 mm • Jaw stroke in diameter 8.8 mm • Base jaw toothing 1.5 mm x 60° • Speed max. 4,500 rpm KITAGAWA power chuck main spindle Hydraulic hollow clamping cylinder SS1881K • Passage 81 mm • Piston stroke 25 mm • Speed max. 4,800 rpm SMW power clamping device Hydraulic full stroke cylinder SIN-S 125 • Pressure max. 70 bar • Tensile force at 40 bar 41 kN • Speed max. 6,000 rpm Bar feeder interface incl. "Optional block skip" 3-color signal lamp Tool setter (manual) Integrated unloading device counter spindle • Diameter max. 80 mm • Length max. 200 mm • Weight max. 3 kg Automatic work area door Belt switch automatic work area door Transformer 120kVA TMX-4000ST Machining condition selecting function Kinematic setup procedure Kinematic adjustment FANUC via iHMI - Renishaw touch probe RMP600 - Macro software - Amplifier - C6 holder - Calibration sphere - Interface Gear skiving function 3D collision avoidance KNOLL KF300/1800 70 bar with throughflow cooler alpha 9-E - Clean water tank: 1,800 l capacity - 1 x low pressure pump: 150 l/min / 3.1 bar - 2 x medium pressure pump: 40 l/min / 7 bar - 1 x high pressure pump: 20 l/min / 70 bar - 1 x frequency converter high pressure pump - 1 x double switch filter - 1 x throughflow cooler alpha 9-E - 7 pressure stages KNOLL scraper belt conveyor 500 K-1 Conveying height 1,700 mm Discharge height above floor 1,150 mm

Condition: good (used), Year of construction: 2003, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, For Sale: Topper TMV-850 Vertical Machining Center (2003) Reliable and precise vertical machining center for demanding production tasks. Specifications: Spindle: BT-40, 8,000 rpm, through-spindle coolant Travel: X = 850 mm, Y = 500 mm, Z = 530 mm Table size: 950 × 500 mm, load capacity 800 kg Kedpfx Aaexp Um Uobsnc Tool changer: 24-position automatic tool changer (ATC) Control: FANUC 0i-MC – easy to operate and widely supported 4th axis: Enables machining of complex workpieces with high accuracy Chip removal: Two chip augers and a rear-mounted scraper conveyor for efficient chip handling Solid and well-maintained machine ready for immediate operation.

Condition: good (used), Horizon Stitchliner 5500 Booklet Maker This machine is in excellent condition, manufactured in 2010. Low mileage. Description: This machine boasts a robust, compact, and professionally built design. It is characterized by high efficiency and binding quality. Maximum throughput is 5,500 cycles per hour, and with die-cutting, 11,000 cycles per hour can be achieved. The StitchLiner is set up fully automatically using a touch panel. Machine equipment: – Two Horizon VAC-100 a and m collating towers – Horizon SPF-30S saddle stitcher – Horizon ACF-30 folding module – ST-40 stacker – Horizon HTS-30S three-knife trimmer Kodpjxgbc Rofx Aabjnc – Two additional EAB-100 compressors – TB-30 delivery, scrap extraction system, wire feeders for large spools, Hohner heads, cutting module, compressors, additional components, accessories, documentation Technical data: Maximum format: 350 x 500 mm Minimum format: 140 x 120 mm Paper weight: 53 to 210 g Maximum booklet thickness: 5 mm plano Staple spacing: 60 to 150 mm Cutting thickness range on the three-knife trimmer: 2 to 25 mm Capacity: up to 5500 booklets/h wire thickness: 0.5-0.7 mm

Condition: used, Year of construction: 1998, Edge Banding Machine Built in 1998 At 5500 mm long, the Quadromat is the shortest edge banding machine available. With its integrated workpiece return, it enables complete processing of edge materials. Not only are the long edges milled within the machine, but the front edges are also copied, thus completing the processing. The finished workpiece is returned to the operator, eliminating manual rework. With PLC control with up to 20 processing programs Workpiece Dimensions Minimum width 60-80 mm (depending on the edge material) Knsdswkba Tspfx Aabjc Minimum length 150 mm Workpiece thickness 10-50 mm Edge band thickness 0.4-12 mm Minimum edge band length 400 mm Feed rate 18 m/min. With 2 jointing motors With multifunctional milling unit (flush, bevel, radius) With scraper With miter saw With 2 glue pots (for transparent and white) and 1 spare pot Compressed air connection 7-10 bar Extraction connection 160 mm Weight approx. 2400 kg Availability: Short-term Storage location: Flörsheim

Condition: used, Used COMEC stainless steel Vacuum mixer Total capacity : 6 litre Useful capacity : 4.5 litre Stainless steel bowl Ø 200 x 190 mm Knsdpfx Aajxputnebsc Double jacket Agitator : paddle – turbine – scraper – variable speed LEYBOLD Type SV 16 vacuum pump Dimensions: Ø 200 x 190 mm

Condition: used, Year of construction: 2025, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Kodpfx Aexnlbtoabsnc

Condition: used, Year of construction: 2013, sheet thickness steel (max.): 4 mm, sheet thickness (max.): 4 mm, outer diameter: 51 mm, pipe diameter (max.): 51 mm, FEEDSTOCK STEEL STRIP .. sheet thickness max.: 4 mm PRODUCT (PROFILE, TUBE) .. external diameter max.: 51 mm specifically suitable for the welding of USM furniture tubes -Large reel without storage -Strip welding device Knsdsxm Rvaopfx Aabec -Side planer -Calibrating roll stand -Forming unit -HF welding unit THERMOTOOL -Unit for scraping without tools -Cooling section -Calibrating unit -Flying saw -Removal section for manual removal -Roller sets for 19, 20, 25, 35.9, 36, 37, 40.8, 41 mm -Various accessories and machine-specific spare parts -Documentation and maintenance logs -CE declaration

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on the dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (400 - 3300 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto a table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt Kjdpfsvw R Ihjx Aabsnc + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Piece weight: 200 - 1650 grams (depending on dough) Piston: 1 dough part piston (diameter 150 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: good (used), Year of construction: 2017, operating hours: 6,300 h, functionality: fully functional, Akira Seiki Dugard 1350 XP machining center (2017) Manufacturer: Akira Seiki Type: Dugard 1350 XP Year of manufacture: 2017 Control: Heidenhain iTNC640 Kedexnngxopfx Aabenc Condition: good, used Spindle hours: 6300h X-axis travel: 1,350 mm Travel distance Y-axis: 640 mm Z-axis travel: 660 mm Rapid traverse X-axis: 33 mm/min Rapid traverse Y-axis: 33 mm/min Rapid traverse Z-axis: 25 mm/min Workpiece weight (max.): 2,300 kg Total length: 3,800 mm Total width: 2,495 mm Table width: 1,500 mm Table length: 600 mm Table load: 2,300 kg Spindle speed 20 -12000 rpm Tool magazine 36 Tool holder SK 40 Scraper chip conveyor belt Infrared probe TS 460 Tool measurement TT160 IKZ 20 bar Documentation/Manual

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Kodexmfa Hjpfx Aabsnc Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: used, Year of construction: 2013, operating hours: 16,073 h, functionality: fully functional, machine/vehicle number: T/41521, year of last overhaul: 2025, OTT Tornado TOP + LIGMATECH EKOMAT ZHR 01/R/065 Return Device Year: 2013 Kodjxpphaspfx Aabenc The machine is equipped with: RMV-40 – Automatic edge band magazine, 0.4-3mm edge thickness, end trimming shears with roller and optical sensor for reducing edge length on the workpiece (saves edging material). Automatic edge feed hopper with optical detection for fixed-length edging pieces. Combi Melt – Gluing zone, supports EVA and PUR hot-melt adhesives, as well as all standard cleaning granulates. Machine Control: Operated via a 15-inch color touchscreen monitor, unlimited number of work programs can be sequentially saved, all preselection of processing aggregates as well as working parameters for the CombiMelt gluing system allow for full automation and maximum operator comfort. Electronic control – reference points with high accuracy +/- 1 mm. Via Beckhoff industrial PC, certain tool aggregates can be adjusted during machine operation/loading. Working Aggregates: -F- Pre-milling unit: For pre-milling workpieces before adhesive application. 2 HF motors, 1.5 kW, forward and reverse, automatic control. -Kc- Double end-trimming unit: With 2 high-frequency motors, 0.3 kW, 12,000 rpm. -Bfc– Rough milling cutter Heavy-duty cutter for milling solid edges from the surface and profiling before rounding radii. -Hft- Fine milling unit - Radius With 2 high-frequency motors, 0.3 kW, 12,000 rpm, double-sided, automatically adjustable. -AKF- Automated copying milling unit as a universal milling aggregate: With two independent spindles for top and/or bottom longitudinal as well as corner processing. Automatically switches from beveling for thin edge up to 1 mm to radii processing. -ZKc- Scraper aggregate R2 Double-sided processing, automatic control, for removing rounded areas. FZK: Flat scraper for removing excess edge and glue residues. -GE- Second guide operation for workpiece leading (can be folded away or towards the machine as needed). -GS- Application of glide agent to the edge. -RS Set – 4-way chemical spraying and cleaning unit. -ZKc- Scraper aggregate R1. -WE: Angular stop – ensures precise infeed of the workpiece to the edgebander. Trouble-free machine in excellent condition, regularly serviced by OTT (Asamer s.r.o.) The machine is currently operating in production and can be tested - we are processing with PUR adhesive. Available for collection end of 2025.

Condition: used, Year of construction: 2007, Jointing cutter 1. Milling station R=2.5 Combination unit Corner rounding cutter R=2 Surface scraper Profile scraper Pneumatic milling adjustment (Straight / Radius) PLC control with Pro-face touchscreen Swappable tank Prepared for special feature: maximum workpiece thickness 60 mm (without jointing) Storage location: Supplier Ksdpfsxnlacex Aabonc

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on the dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (180 - 2000 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto a table or other machines (rounder, etc.) possible Kjdpewyvvbofx Aabonc STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Piece weight: 90 - 1000 grams (depending on dough) Piston: 1 dough part piston (diameter 120 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (100 - 1400 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time Knjdpfswyu Uvjx Aabec + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Unit weight: 70 - 1400 grams (depending on dough) Piston: 1 dough part piston (diameter 70 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on the dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (60 - 740 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto a table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Unit weight: 30 - 370 grams (depending on dough) Piston: 1 dough part piston (diameter 80 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Knsdpfx Aaswyu Upebjc Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph