Used Scrap for sale (430)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, laser power: 3,200 W, sheet thickness (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Combined punching/laser operation: 3,000 mm × 1,500 mm Punching operation: 3,000 mm × 1,500 mm Dcjdpfx Apjzyay Istsl Laser operation: 3,000 mm × 1,500 mm Working area without repositioning: Large format Sheet metal thickness, structural steel max.: 8 mm Sheet metal thickness, stainless steel max.: 8 mm Sheet metal thickness, aluminum max.: 4 mm Maximum punching force: 220 kN Maximum punching speed (at 1 mm stroke): 900 strokes/min Maximum marking speed: approx. 2,800 strokes/min Maximum axis speed: 108 m/min Axis speed: simultaneous in X and Y axes Tool magazine: Linear magazine with multi-tools Maximum number of multi-tools: 18 Clamps: 3 Tool positions: 180 MACHINE DETAILS Laser source: Trumpf TruFlow 3200 CO₂ laser Laser power: 3,200 W Operating hours (as shown in the photo) Beam on hours: 12,716 h Laser on hours: 73,705 h EQUIPMENT SheetMaster with two large-format tables Automatic scrap sheet disposal onto lifting table

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 3,547 mm, total height: 2,163 mm, total width: 260 mm, conveyor belt width: 260 mm, delivery head: 1,700 mm, ejection height: 1,700 mm, conveying length: 3,567 mm, transport height: 1,700 mm, Magnetic scraper conveyors with a conveying capacity of up to 60 kg/h, drive motor 0.4 kW. Both conveyors were only used for a short period, less than 100 operating hours. They can be delivered individually or as a package with a suitable chip centrifuge, which was also only used for a short period. Dodpfx Ajzwpnveptjcl

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Haas scraper chain conveyor in very good condition. Equipped with 2 flights. See PDF file for sketch. Trough inner width 600 mm. Dedpfjzn N Udjx Aptocl Drive via geared motor with 4.0 kW.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Haas scraper chain conveyor in very good condition. With 2 sections. See PDF file for sketch. Dedjzn N Tyspfx Aptecl Trough inner width 600 mm. Drive via geared motor with 4.0 kW.

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm strip thickness: 0,4 – 2 mm Dcodpegnygljfx Aptsl edge trimming width: 5 - 60 mm speed: approx. 60 m/min

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm Dcjdpfegrug Rjx Aptol strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm speed: approx. 60 m/min

Condition: used, functionality: fully functional, operating hours: 28,922 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bystronic, controller model: ByVision, laser type: fiber laser, laser source manufacturer: MaxPhotonics, laser hours: 9,467 h, laser power: 8,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning speed: 169 m/min, positioning accuracy: 0.1 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 890 kg, type of input current: three-phase, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, nozzle changer, Bystronic ByAutonom 3015 – Fiber laser cutting machine (retrofit 2024) A very complete and production-ready flatbed laser cutting machine from Bystronic. Built in 2014, it was fully converted in 2024 from CO2 to a modern 10 kW fiber laser (MaxPhotonics), including CE declaration for the conversion. The machine is currently in production and combines the robust Bystronic platform with an automatic pallet changing system and a high degree of automation with the speed and low operating costs of fiber technology. Technical specifications: Dcodpfx Apsznt I Ujtel • Brand / model: Bystronic ByAutonom 3015 • Year of manufacture: 2014 – fiber retrofit 2024 (with CE declaration) • Laser technology: fiber 10 kW – MaxPhotonics • Cutting head: RayTools BS08K smart cutting head with autofocus • Working area: 3,000 x 1,500 mm • Pallet changer: automatic pallet changing system, changing time approx. 22 s, load capacity 890 kg per pallet • Cutting capacity: steel up to 25 mm (O2, up to 40 mm possible), stainless steel up to 25 mm (N2), aluminum up to 20 mm, brass up to 20 mm • Dynamics: simultaneous 169 m/min, acceleration 30 m/s² • Accuracy: position deviation 0.1 mm/m, repeatability accuracy 0.05 mm • Control system: Bystronic ByVision with 22" touchscreen • Operating hours: approx. 28,922 hours machine / approx. 9,467 hours laser production Equipment / options: Automatic nozzle changer (40 positions), automatic nozzle centering with collision detection, filter system (DFPRO 6-3000), conveyor belt for scrap and small parts, extra laser protection windows front and side. Included: All documentation (digital), support & assistance, certified pre-purchase inspection, webshop with discount account. Optional (turn-key delivery possible): Dismantling, transport (including insurance), installation, base plates & anchoring, CAD/CAM software (advanced), extended warranty, smart factory connection, machine & software training, FastCal calculation software and portal. Interested in this machine? Please contact us for more information, a viewing, or a price indication.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Djdpfx Apjzu Ryhjtjcl Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: used, Year of construction: 2004, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 900, power: 3 kW (4.08 HP), Description Type: EH 400/1 Serial number: 900 Year of manufacture: 2004 Voltage/frequency: 400 V/50 Hz Rated power: 3 kW Boc Hpyfijw Niuho Dewt CE certified: Yes Device description: Industrial shredder or crusher (shredder/granulator). Notable features in the pictures: System with rotating blades (shredding unit) on a 2 mm shaft 3 kW SEW motor and reduction gear 8 mm screen (the screen is marked ‘8 mm screen’) – indicates the size of the output particles Rollable, transportable design Dedpezgblrsfx Aptscl Material discharge container and lower motor system Machines of this type are generally used to shred the following materials: Plastic Rubber Wood Light metal shavings Electronic scrap

Condition: like new (used), Year of construction: 2012, operating hours: 1,800 h, functionality: fully functional, total width: 2,500 mm, total length: 13,000 mm, total height: 3,000 mm, pressure: 630 bar, Equipment: cooling unit, We offer this like-new Moros 630 hydraulic shear, manufactured in 2012. Manufacturer: Moros Model: 630 Year of manufacture: 2012 Dcedpfx Ajzua Sgjptjl Condition: Like new Type: Hydraulic shear If you have any questions or need more information, please do not hesitate to contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Completely new resonator available at the end of 2025 with 6,000 watts + New laser cutting head (investment approx. EUR 190,000 in 2025) Immediately available - inspection possible Manufacturer: Bystronic Model: BySprint fiber 3015 Year of manufacture: 2022 / new resonator and cutting head in 2025 Sheet metal format: Max. format, 4,000 x 2,000 mm Operating hours: After upgrade at the end of 2025: approx. 1,400 operating hours, approx. 550 cutting hours Before upgrade until 2025: approx. 17,700 operating hours, approx. 7,500 cutting hours SPECIAL EQUIPMENT: - Cut Control Fiber - Part and cross conveyors in the cutting area - Dust extraction system with 200-liter drum adapter - Upgrade in 2025: 6,000-watt fiber laser with new cutting head Standard equipment: BySprint Fiber 4020 Pallet changer system with 2 pallets Closed enclosure/roof Scrap conveyor with rollers CNC control and cabinet Touchscreen with user interface for ByVision Operation and comfort Maintenance Messenger Restart Manager System Manager Handheld operating device ByHand Cutting parameter assistant Uninterruptible power supply (UPS) Cutting bridge OPC interface cutting Dcodpfx Aezh E Ugeptjl Cutting head Piercing Jet ByPos Fiber Detection Eye Nozzle cleaning Scanning Fiber laser sources Tank heater Tropicalization Interface to automation/handling Cooler Operator protection in the cutting area Operator protection in the loading/unloading area Voltage 400V / 50Hz Compressed air (machine incl. laser source and cooler) Material specification Part tolerances and cut surface quality Cutting gas supply and cutter quality TECHNICAL DATA: Maximum positioning speed parallel to the axes X/Y: 100 m/min Maximum positioning speed simultaneously: 140 m/min Positioning deviation Pa (VDI/DGQ 3441): +/- 0.1 mm Positioning scatter Ps (VDI/DGQ 3441): +/- 0.05 mm Edge detection accuracy: +/- 0.5 mm Maximum workpiece weight: 1580 kg Table change time: 35 seconds Laser power: 6,000 watts Maximum sheet metal thickness: Steel: 30 mm Stainless steel: 25 mm Aluminum: 20 mm Brass: 15 mm Copper: 15 mm Machine weight (without extraction, cooler): approx. 15,000 kg Machine dimensions, approx.: 13,743 mm length, 6,670 mm width, 2,565 mm height This used machine can be inspected under production conditions. All information is without guarantee - sale is made excluding any guarantees or warranties. Subject to prior sale.

Year of construction: 2026, condition: like new (used), Scraper chain conveyor robust and wear-resistant design optional: bar magnet separator please specify when requesting a quote: Dedpfxsztzgcj Aptocl conveyor capacity m³/h dimensions

Year of construction: 2011, condition: used, functionality: unexamined, Scraper conveyor for sale. The conveyor consists of two sections – a horizontal and an inclined part. Length of the horizontal section: 6,870 mm, length of the inclined section: 5,120 mm, outer width: 1,580 mm, outer height: 1,780 mm, inner width: 1,270 mm, inner height: 1,090 mm, drive motor: 5.5 kW, slat pitch: approx. 280 mm. The conveyor is dismantled and ready for transport. The machine can be inspected at: Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland. Dedpswxb Tpsfx Aptecl

Condition: good (used), functionality: fully functional, Year of construction: 2016, laser power: 3,000 W, TruLaser Tube 5000 fiber (T06) X Working area max.: 6500 mm Y Working area max.: 200 mm Laser power: 3000 Watts Control system: SINUMERIK 840D SL Standard equipment Machine - Machine table for automatic loading up to 6.5 m - Max. outer diameter of the circle: Round tube up to 152 mm, Rectangular tube up to 170 mm - LoadMaster tube 6.5 m with grouping chamber - Part removal station for 3 m finished part length (incl. scrap conveyor with container) - Part stacking station (with conveyor table and conveyor table extension) - NitroLine - FocusLine - Laser power control - Programmable cutting gas - Automatic start/stop system - Work area lighting Laser - Solid-state laser TruDisk 3001 with one laser output - Maintenance log function - Laser chiller Cutting unit - Lens cutting head with 150 mm focal length - ControlLine Control system - Sinumerik 840DSL - Remote maintenance interface Data transfer - USB interface - RJ45 network interface Safety - CE certification - Light barriers - Compact dust extraction system (1500 Nm*/h) - Protective housing with certified safety panes Service - Network installation via teleservice Additional machine equipment - SeamLine Tube with inner detection - Adaptive clamping technology - Adaptive clamping feeding station - Adjustable feed chuck - Chip conveyor, longitudinal - Technology package for bevel cutting Automatic LoadMaster Tube 6.5 m - LoadMaster Tube 6.5 m at the rear - LoadMaster Tube 6.5 m tube diameter 15 mm Djdpfezv Tnwjx Aptocl - Unloading station 4.5 m - 1 set of clamping jaws - 1 set of guide rollers - Various support sets for round and rectangular tubes

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. Dcjdpfeyzr Nmsx Aptol The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Dcodpozycpxjfx Aptsl Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device Dsdpfxsxab Tvj Aptscl - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: good (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: C 99 03 05, control type: NC control, degree of automation: manual, actuation type: electric, sheet thickness (max.): 6 mm, table height: 860 mm, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 6,150 kg, total length: 6,000 mm, total width: 4,800 mm, total height: 1,800 mm, number of support arms: 2, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, foot remote control, type plate available, For sale is an AMADA GS630 plate shear with additional equipment for efficient and gentle material and part transport. The system is equipped with a lifting table and a conveyor belt, enabling comfortable further transport of the cut components. An integrated scrap collection box ensures the separate collection and removal of the remaining scrap strips. Dsdpfxezxqbao Aptscl The combination of a high-performance plate shear and automated part handling enables an efficient and material-friendly cutting process while reducing manual handling. Equipment: AMADA GS630 plate shear Robust and reliable AMADA machine technology Lifting table for receiving and transferring the cut components Conveyor belt for automated part transport Scrap collection box for separate collection of scrap strips Gentle removal of finished components Reduced manual effort in part handling Suitable for efficient industrial sheet metal processing The combination of lifting table, conveyor belt, and scrap collection box is particularly practical, as cut components can be transported in a controlled manner, and scrap strips are collected separately. This optimizes the material flow and reduces the risk of damage to the manufactured components. Technical data: Manufacturer: AMADA Type: GS630 Machine type: Plate shear Year of manufacture: 1999 Max. sheet metal thickness: 6 mm Lifting table: available Conveyor belt: available Scrap collection box: available Condition: used, good Location: 54576 Hillesheim Inspection and test run possible by arrangement. A video of the machine during production can also be provided. Price and further technical information are available upon request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 8,000 h, machine/vehicle number: 8259211467, control type: CNC control, degree of automation: automatic, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS6000U, laser hours: 8,000 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 10 mm, pipe diameter (max.): 400 mm, pipe length (max.): 6,000 mm, table length: 3,060 mm, table width: 1,530 mm, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,530 mm, travel distance Z-axis: 160 mm, positioning speed: 140 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 900 kg, power: 4 kW (5.44 HP), input voltage: 380 V, total length: 12,635 mm, total width: 7,905 mm, total height: 2,277 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, - Cutting head: Precitec Procutter 2.0 F150 TUBE CUTTING FUNCTION - Max diameter of tube to be cut (D): 30 - 400 mm - Max square tube: 250 x 250 mm - Cutting range of profiles (length): 3000 mm - Max length of tube to be cut: a) Round tube Dmax = 115 mm, max length is 6000 mm (possible to feed manually through the opening in the chuck) b) Square tube 30 x 40 up to 80 x 80 mm, max length is 6000 mm (possible to feed manually through the opening in the chuck) c) For larger tubes and profiles, max length is 3000 mm - Positioning accuracy of tube/profile cutting: +/- 0.5 mm per 1000 mm. This value is given for the first 1000 mm. Further accuracy depends on the straightness and precision of the tube/profile. CNC and Software coming with the machine: - CNC control: SIEMENS SINUMERIK 840D - LANTEK Expert Cut-Plus: 1 license (recommended to update) - 2D file import. Dwg and dxf - CSV file import (Lantek format and data must be followed)Warehouse module shows sheet residues and stock levelsPlugin for SolidWorks and Solid Edge - LANTEK Flex3d TUBES: 1 license (recommended to update) - 3D importCSV file import (Lantek format and data must be followed) OTHER OPTIONS - Automatic nozzle cleaning and calibration - Exhaust gas filter - Central lubrication - Motorized scrap conveyor under the working table - Work zone lighting - Remote management for factory technical support machine is available for immediate delivery. Dodpsy Naypsfx Aptjcl The buyer has the right to ask questions and come over to check the machine. Later claims will not be considered. Dismantling of the machine, packaging for transport, loading into a container/truck - not included in the machine price.

Condition: new, Year of construction: 2026, container length: 6,500 ft, We offer you high-quality roll-off containers with mutually angled outer walls. Volume up to 40 cbm Designed for the scrap and demolition industry, made of wear-resistant special construction steel HB450 HARDOX®. ⚠️ Unfortunately, many dealers advertise with the Hardox brand name but do not use Hardox! We use exclusively "original" HARDOX® from the manufacturer SSAB! Our containers have a sticker with a QR scan code. You can use the number to check the "authenticity" of our products!!!! --- FINANCING --- LEASE PURCHASE --- LEASING --- -possible, please contact us!- Heavy-duty design for use in the scrap and demolition industry. Dimensions: 6500 x 2300 x 2400 mm 7000 x 2300 x 2400 mm Other sizes available upon request. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Cross member: INP 180 Mounting bracket Ø 60 mm, hook height 1,570 mm -Floor made of 5 mm HARDOX® HB450 -Side walls 3 mm HARDOX® HB450 -End profile made of 5 mm Strenx® 700 special edge profile -Rear and center cross members made of 5 mm Strenx® 700 special edge profile -Rear door lock model Holland + safety lock -Lateral central lock -All-round tarpaulin and net hooks -Ladder at the front, galvanized Dcjdpfxjzg Iu Ts Aptsl -Primed once on the inside, double coated on the outside -Double coated on the outside in a single color according to your desired RAL color Optionally available on request: -Cross member UNP 220 -Roll tarp -Steel cover with winch / hydraulics -Ladder on the rear door -Additional cross members / belly band -French flap -Swing flap -Grain slide

Year of construction: 1990, condition: good (used), strip width: 900 – 2.050 mm strip thickness: 1 – 6 mm edge strip width: 5 – 50 mm material (strength): 1.000 N/mm² Dcsdpfxegrug Ae Aptel

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes Djdpfjzy Hqtjx Aptscl 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Dcedpfjzy Hdtox Aptsl Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, Year of construction: 1985, plate thickness 4 mm cutting length 225 mm blade length 225 x 225 mm table surface area 710 x 500 mm total power requirement 3,5 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,2 x 0,8 x 1,1 m 90° Notching machine Large table Dsdpfszyyy Iex Aptecl Adjustable stops Footswitch Emergency stop switch Scrap collection bin

Condition: good (used), Year of construction: 2018, functionality: fully functional, operating hours: 3,915 h, Hydraulic baling press, model JM-125/75, manufactured in 2018. Designed for the pressing and compaction of ferrous scrap and other metallic waste, providing high productivity and optimal density of the resulting bales. The machine is constructed with a high-strength steel structure and equipped with a high-performance hydraulic system, ensuring reliability and durability even under intensive working conditions. Main features: Dsdpfozdfzyex Aptecl Type: Stationary hydraulic baling press Pressing force: 125 tons High-performance hydraulic system Designed for the processing of scrap and metallic waste Robust construction for continuous industrial use Easy access for maintenance and operation This press is an efficient solution for recycling centers, metal recyclers, and facilities dedicated to the management of industrial waste.