Used Screen Imagesetter for sale (4,040)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, input voltage: 380 V, total length: 8,000 mm, total width: 2,940 mm, total height: 1,700 mm, compressed air connection: 7 bar, type of input current: three-phase, overall weight: 4,500 kg, input frequency: 50 Hz, Printing area: 2,000 x 3,000 mm - Minimum positioning accuracy: ±0.1 mm - Minimum printing size: 500 x 700 mm Iisdjz R I Tqspfx Agyoh - Maximum size of screen printing frame: 2,500 x 3,650 mm - Glass thickness for printing: 2.5 - 19 mm - Manufacturing accuracy: ± 0.05 mm - Fine adjustment range for screen printing frame positioning: ± 15 mm - Electrical parameters: 10 kW/400V/50Hz - Compressed air pressure: 7 bar - Overall dimensions LxWxH (mm): 8,000 x 2,940 x 1,700 mm - Weight: 4,500 kg Main features: - Manual loading and unloading of the glass sheet for printing is done on the loading/unloading conveyor. - Loading the glass sheet and positioning it for printing is done from the front by the operator. - Lowering the screen and moving the squeegee (forward and backward movement) is done automatically. - The machine is equipped with a blower to create an air cushion (necessary for easy movement of the glass parts on the work surface) and a vacuum system (necessary for fixing the parts during printing). - The machine is equipped with stoppers that define the edges of the work surface on two sides (allowing for accurate placement of the part to be printed). - The upper part of the machine folds down from the rear hinges, facilitating access for the operator to load and unload the glass part. - Mitsubishi PLC with HCU (Human Computer Interface) that provides a user-friendly interface and intuitive controls.

Year of construction: 2020, operating hours: 5,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 25140, Equipment: CE marking, Secondary screen with two decks, 1200 x 2500 [mm], surface area 3.0 [m2], weight 1400 [kg], polyurethane mesh, square mesh 65 and 5 [mm]. Lateral tension, speed 900 [min-1], inclination 7°, 5.5 [kW] electric motor, pulley, V-belt, protective housing on the drive side and opposite bearing, compression springs. Machine sold without a frame. Upon request, we can manufacture a custom frame with chutes. Iodpfxsz Dkxye Agyoih

Year of construction: 2016, operating hours: 3,600 h, condition: excellent (used), functionality: fully functional, Used Terex Evoquip Colt 800 Tracked Screening Plant Year 2016 3600 Hrs 9 x 4 Two Deck Screenbox Woven Wire Top Deck & Bottom Deck CAT Power No Adblue 17,000 kgs Weight Iiedpez Nkumjfx Agysh Excellent Condition Ready To Go To Work

Condition: used, Year of construction: 2001, functionality: limited functionality, input voltage: 230 V, overall weight: 350 kg, height adjustment type: pneumatic, working width: 600 mm, table width: 600 mm, table length: 650 mm, power: 1.5 kW (2.04 HP), Professional industrial ATMA TY-700H flatbed screen printing machine for sale due to the termination/change of our screen printing activities. The machine comes from our own screen printing facility and was used for professional production work. Details: * Brand: ATMA * Type: TY-700H / AT-TY-700H Ijdpfxoz Hykdj Agyjih * Year of manufacture: 2001 * 230 V * 1500 W * Semi-automatic flatbed screen printing machine * Max. printing size approx. 600 × 650 mm * Max. frame size approx. 900 × 1100 mm * Vacuum table * Pneumatic squeegee and flood bar control * Pneumatic screen frame clamping * Vertical lifting of the screen frame * Digital/microprocessor control * Fine adjustment/registration of the printing table * Includes existing squeegees/flood bars and accessories as shown in the photos * Weight approx. 350 kg Condition: The machine has been used professionally in our screen printing facility. We have currently tested it electrically: the machine switches on, the control panel and digital display are working. We have not re-tested the full functionality at this time because compressed air is not available at the current location. Therefore, we are selling it in its current condition, and inspection is of course possible. (Connecting it to a mobile compressor is possible if desired). Due to its size and weight, it can only be picked up. The buyer is responsible for arranging suitable transport. Serious offers are welcome. Location: Eindhoven.

Condition: excellent (used), Year of construction: 2015, For sale: a Doppstadt Bioscreen rotary screen. Year of manufacture 2015, in very good condition, little used. The rotary screen is hydraulically driven by the auxiliary drive of the upstream screen and produces a screening cut of approximately 150 mm. Iedpfxez Tdyqs Agysih

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Automatic CNC screen printing machine ASP-100LS/CD (K5) | Manufacturer: Oltronik MACHINE OFFERED: The ASP-100LS/CD machine is a professional, numerically controlled (CNC) device for multi-color screen printing on cylindrical, oval, and rectangular objects. It enables the execution of multi-color printing cycles (up to 5 colors simultaneously) with UV drying, both for cylindrical and flat printing. A PLC controller with a touchscreen provides precision, repeatability, and ease of programming. TECHNICAL DATA: Manufacturer: Oltronik | Model: ASP-100LS/CD (K5) Year of manufacture: 2005 | Operating hours: 156,865 cycles Control: CNC PLC with touchscreen Squeegee heads: 5 pcs. Drying: UV (for cylindrical and flat printing) Cylindrical printing: Ø32–Ø150 mm (printing height 145 mm) Rectangular printing: 32×32 mm to 105×105 mm Oval printing: 32×32 to 150×150 mm Printing range (2 screens): 410 mm | (3 screens): 220 mm | (4 screens): 125 mm | (5 screens): 68 mm Max. external height of screen frames: 485 mm | Frame profile: 25×25 mm EQUIPMENT: Pneumatic system (air preparation station, manometers, loading cylinders, screen holding cylinders, and squeegee pressure cylinders), electrical system with a control cabinet, operator panel, start pedal, emergency stop button, protective housing. DOCUMENTATION: Complete technical and operating documentation from the manufacturer Oltronik (76 pages). Iedpfx Agezwdwrsyjih

Condition: like new (used), Year of construction: 2015, functionality: fully functional, input voltage: 220 V, total length: 1,000 mm, total width: 1,000 mm, total height: 2,000 mm, compressed air connection: 6 bar, overall weight: 150 kg, type of cooling: air, Equipment: documentation/manual, balloon printing machine with a capacity of approximately 1,250 pieces per hour, capable of printing on one or two sides in a single color; the machine is ready for immediate use and can be collected in Dronten, the Netherlands. Iiedpfxjz E Imko Agyeh

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 153-06SP0610, compressed air connection: 8 bar, Due to business closure, a textile screen printing machine is being sold at this low price. It has 10 stations and 6 printing units (Made in Germany), with only 454,220 prints, and includes 2 x Digiflash Rutland intermediate dryers. The machine is fully functional, in good condition, and must be picked up by the buyer by mid-November. • 10 aluminum sandwich pallets, 420 x 600 mm • 10 aluminum sandwich pallets, 320 x 600 mm • Various squeegees • Power requirements: 3 x 400 V, 50 Hz, 16 A • Digital microprocessor control • Operation via touchscreen, text display available in various languages • Screen frame loading from the side • Pneumatic screen clamping • Double index and ½ index Iisdpfx Ageztqy Soyoh • Control panel on each printing arm • Registration accuracy 0.025 mm • Adjustable cycle speed • Gap adjustment Optionally, a Rutcure Master 18 drying tunnel, chamber length 260 cm, belt width 105 cm, 18 KW, manufactured in 2007, can be purchased in addition. 1350 Euro (negotiable).

Year of construction: 2020, condition: used, New: Yes Colour: Orange Field of application: Mining Volume of the tank: 150 m^3 Productivity: 250 tph Rated sizes : 2000 x 6000 mm Motor power : 22 kw 1500 d/dk Drive system : with conventional drive, with 2 weights Amount of Ball Bearing : 2 ea Number of Ball Bearing :2*22318 (FAG T41 Ball Bearing with Vibration Amplitude) Screening area : Single stage Number of Vibration amplitude : 6-8 amplitude, Linear Free Eliptic Iiedpfxex D A Upe Agyoh Number of Springs : 12 ea Front chute : with 6 mm rotary chute Bottom chute : flat discharge chute Type of power transmission : belt pulley couples Body Construction : Heavy duty type (12mm ST37 Ereğli Iron Steel Sheet Metal)

Condition: like new (used), Year of construction: 2013, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2025, warranty duration: 12 months, input frequency: 50 Hz, Useful printing format: 150x300. Frame lifting parallel to the printing plane. Iisdpfxjzqf D To Agysh Printing plane adjustable on all three axes. Lift-O-Mat (device for progressive frame release), continuously adjustable from the operator side. Printing stroke adjustment via magnetic microswitches. Printing speed and ink return adjustable continuously and independently. Extremely uniform squeegee advance in the transverse direction, even at high speeds. Micrometric adjustment of the squeegee and blade pressure. Squeegee tilt adjustment. Two operating cycles: single and pulsed, for setup. Printing plane with a honeycomb structure and anodized aluminum coating. Printing plane equipped with a vacuum device with pre-vacuum and blow functions. Quick removal of the squeegee and blade. Pneumatic frame locking system.

Year of construction: 2026, condition: new, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Ijdpfx Agjzz R E Rsyeih Heavy Duty Type Inclined Vibrating Screens are designed for the classification of all kind of materials such as medium size aggregates and finished products. • Model: FABO TE-2060 • Type: Vibrating Screen • Size: 2000 x 6000 mm • Deck size: 2-3-4 • Motor: 22 kW Bearings: Heavy duty SKF-FAG • Capacity: 180-220 TPH • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2006, condition: used, functionality: fully functional, For sale a bunker and vibrating screen, they are made for each other, the machines were originally used for mung bean sprouts. The machines are used but in good condition. the hopper/bunker is movable with small wheels, and the belt is speed controllable, the bunker has a small tipper, this tipper is at the moment not installed but only for space storage purposes, its bolted with 8 bolts. This tipper is moved manually with a forklift or hoist. The vibrating screen is good and movable with small wheels. The sieve can be used also for other vegetables than mung beans sprouts. Isdpfxsz Ngt Eo Agyoih Both machines will be sold together. Price is for both machines. Price is negotiable!

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, input voltage: 240 V, input frequency: 50 Hz, Kodak Magnus 800 Quantum Platesetter (CTP) — Complete System for Sale Manufactured: March 2009 | Fully Functional | Status: Ready System Overview Offered here is a complete Kodak Magnus 800 Quantum thermal CTP (Computer-to-Plate) line, sold as a full working system including the platesetter, automatic processor, multi-cassette autoloader, chiller, and punch/bender unit. This setup has been in production use and is shown powered on and reporting "Ready" status on its native control software. System Components 1. Kodak Magnus 800 Quantum Platesetter Serial No.: M8G0967 | Manufactured: March 2009 Cat No: 010-00663A Electrical: 200–240V, 50Hz, 15A Pneumatics: 8 Bar Class 1 laser product, CE / CSA (C/US) certified 2. Magnus 800 Multi Cassette Unit (autoloader) Serial No.: M8M0488 | Manufactured: March 2009 Cat No: 010-00313A Electrical: Mains 200–240V 50Hz 5A + Platesetter 200–240V 50Hz 5A Pneumatics: 8 Bar CE / CSA (C/US) certified 3. Automatic Plate Processor — Mercury T-HD 1250 (made for Kodak by Heights UK Ltd.) Serial No.: ME10408 | Year: 2009 Electrical: 200–230V, 16A, 50/60Hz, 2W+GND CE, FCC, ETL certified 4. Recirculation Chiller — Neslab Merlin M75 Maintains stable processing temperature for consistent plate output (unit shown active, set to 16°C). 5. Plate Punch/Bender — hu.q CSG-125 Serial No.: 080872092016 | Manufactured: Aug 2008 Electrical: 200–240Vac, 1A, 50/60Hz CE, cUL/US Listed 6. Control Workstation Lenovo ThinkVision display + keyboard running native Magnus 800 controller software (Status / Tools / Miniview / Queue / Cassettes / Messages / Safety). Cassette bays loaded and configured with plate size TP-U 968x651x0.3. Highlights Complete, matched Kodak Magnus 800 line — platesetter, processor, autoloader, chiller, and finishing unit sold together All units date from the same production year (2008–2009), consistent with a single original installation Iisdpfxezzpwro Agysh System actively powered up and shown in "Ready" operating state Automatic cassette loading with multiple plate bays configured and stocked Includes integral roller conveyor/output section for plate handling Notes for Buyer Voltage/phase requirements: platesetter and processor both require 200–240V industrial supply (verify local phase configuration — processor listed as 2W+GND) Compressed air supply required (8 bar) for platesetter and cassette unit Buyer should arrange inspection/live demonstration and professional disconnection, rigging, and transport, as with any large-format CTP installation Sold as-is; recommend a functional test run with actual plate material prior to purchase

Year of construction: 2026, condition: new, functionality: fully functional, Vibrating screens are used in crushing and screening plant to separate end products of various sizes. When the material is poured into the screen, the smaller ones pass through the screen surface. Vibrating screens are produced in two, three and four decks and in various sizes. The vibration system can be in the middle or above the screen body. It is obtained by rotating the eccentric weights connected to the shaft, which are mounted on the screen body. Screen body sits on fixed or mobile chassis with heavy type helical springs that absorb vibration. The vibration systems of these vibrating screens are operated by belt-pulley transmission with an electric motor. Horizontal screens, which are capable of better-quality screening, are driven by a double drive center. • Model: FABO HTE-2260 • Type: Horizontal Vibrating Screen • Size: 2200 x 6000 mm • Deck size: 2-3-4 • Motor: 2 x 30 kW • Bearings: Heavy duty SKF-FAG • Capacity: 250-370 TPH Iijdszz R D Tspfx Agyjh • Including chassis, motor and safety guards. Depending on its size, it has a screening capacity in the range of 250-370 tons per hour.

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: 0011000019, We are offering this used Hunan Xing Yuan Technology Android touchscreen vending machine, manufactured in 2024, for sale. Manufacturer: Hunan Xing Yuan Technology Model: Android Touch Screen Vending Machine Year of manufacture: 2024 Condition: used Machine type: Vending machine Isdpez Dxkqefx Agyeih If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 11/2022, total length: 2,750 mm, total width: 1,650 mm, total height: 1,800 mm, overall weight: 750 kg, Equipment: documentation/manual, Automatic CNC machine for UV screen printing – SD2-C4-UV (2022) MACHINE OFFERED: The SD2-C4-UV is an automatic, four-color CNC machine designed for screen printing. The machine performs multi-color printing on flat and three-dimensional (round) products, using UV and IR-cured inks in a single production cycle. The machine allows printing on three-dimensional objects in up to six colors, combining UV and IR technologies. It is intended for printing components made of non-flammable materials and plastics, provided that the temperature of the surfaces of the printed components is controlled. We offer for sale a fully functional, automatic CNC machine for UV screen printing, model SD2-C4-UV, manufactured in 2022 (serial no. 11/2022). The machine operates reliably; the sale is due to a change in the production profile. BASIC DATA • Model: SD2-C4-UV • Serial number: 11/2022 • Year of manufacture: 2022 • Condition: used, technically sound • Cycle counter: 381,124 • Documentation: complete operating manual (120 pages) TECHNICAL PARAMETERS • Power supply: 3 × 400 VAC / 50 Hz / max. power 10 kW • Dimensions: 2750 × 1650 × 1800 mm; weight ~750 kg • Operating pressure: 6.0 bar (max. 7.0 bar) • Printing of round objects: diameter 10–150 mm, height up to 250 mm • Printing of flat objects: up to 250 × 100 × 100 mm • Max. printing area: 310 × 180 mm (1 color) • Operation: 1 operator MAIN ADVANTAGES • 4-color UV and IR screen printing in a single cycle (up to 6 colors) • 9 CNC servo drives – full automation of movement • Printing on round (diameter 10–150 mm) and flat objects Iodpfjzwdv Uox Agysih • Vision system (camera + monitor) for precise screen alignment • Remote service via the Internet; software update • PLC controller with a touch HMI, menu in Polish • Complete safety systems according to CE standards (opto-electronic barriers, foot pedal) • UV reactor with a 200 mm lamp / ~250 W/cm

Year of construction: 2005, condition: good (used), machine/vehicle number: 756, Thermal CTP PT-R4300 (Computer to Plate) Recording System: External Drum PST 26 Plate Stacker Glunz & Jensen Interplater MP 85: Thermal Plate Processor Isdpfjfh Dmzex Agysih Technical Details: Throughput option (plates/h in max. format) : 20 Plates / Hour Light Source: 32-channel infrared laser diodes Min. Plate Format : 324 x 370 mm Maks. Plate Format : 830 x 660 mm Maks. Imaging Format : 830 x 633 mm Plate Thickness : 0,15 - 0,3 mm Machine Dimensions L x W x H : 1,750 x 1,030 x 1,178 mm Technical data can vary according to job, consumables and possible other factors

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 099809, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Type: DA360 SSA43R Weight: approx. 150 kg Motor: Metering screw: 0.75 kW Rotor: 0.75 kW Speed: Metering screw: 177 rpm Iodpjz Rp Uzofx Agyjih Rotor: 1500 rpm Includes documentation.

Year of construction: 2026, condition: new, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Ijdozzzn Nopfx Agyoih Heavy Duty Type Inclined Vibrating Screens are designed for the classification of all kind of materials such as medium size aggregates and finished products. • Model: FABO TE-1650 • Type: Vibrating Screen • Size: 1600 x 5000 mm • Deck size: 2-3-4 • Motor: 15-18,5 kW Bearings: Heavy duty SKF-FAG • Capacity: 100-130 TPH • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), Sweco rotary screen ATEX certified Iiedpfx Asz Rpf Hogysh made entirely of stainless steel

Year of construction: 2024, operating hours: 355 h, condition: used, 2024 | Keestrack K4 | Used Screen | 355 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Isdpfoz N Hq Dsx Agyeih 💰 Buy Now for EUR 225000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 77 inspection points 77 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: In the state of a new machine 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41381 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 14764, Key operating data Motor power (standard): 5.5 kW Cutting diameter of the rotor: 300 mm Rotor width / cutting length: 125 mm Iijdoztplgepfx Agyoh Rotor speed: 230 rpm (slow-speed system for noise and dust reduction) Average output (throughput): 80 kg/h (depending on the type of plastic and the mesh size of the screen) Power supply: 3 x 400 V + N, 50 Hz Cutting system and working chamber Opening of the shredding chamber: 450 x 335 mm Opening of the feed hopper: 490 x 420 mm Number of rotating knives (on the rotor): 10 Number of fixed knives (on the stator): 2 Cutting geometry: Shear cutting with a slanted rotor, which facilitates the handling of three-dimensional parts Standard screen: Mesh size 6 mm (round, interchangeable) Particle size of the recovered regranulate: Standard 4–8 mm (depending on the installed screen) External dimensions and weight Machine length: 1100 mm Machine width: 900 mm Machine height: 2100 mm (for the version with a high stand frame for dust extraction) Total weight: 500 kg Additionally: new replacement knives, three screens with 5, 6 and 8 mm Cross magnet in the feed hopper!

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, overall weight: 34 kg, input frequency: 50 Hz, input current: 2 A, input voltage: 230 V, RETSCH AS 200 control – Vibrating sieve machine with analytical sieves 25–200 µm Iedpfxez Ixfvo Agyjih For sale is a RETSCH AS 200 control for particle size analysis and fractionation of powders and bulk solids. The system is suitable for applications in laboratories, research, and quality assurance, for example, for the analysis of metal and ceramic powders. The machine is in very good condition with normal signs of wear and tear. The total new price, including the listed accessories, was €6,180 in January 2024. The electromagnetic drive generates a three-dimensional sieving motion. The vibration amplitude, sieving duration, and interval operation can be digitally adjusted. The controlled amplitude enables reproducible sieving results; up to 99 parameter combinations can be saved. Technical specifications according to the manufacturer: - Measurement range: 20 µm to 25 mm, depending on the material and sieve set - Maximum sample quantity: 3 kg - Vibration amplitude: 0.20–3.00 mm, digitally adjustable and controlled - Sieving duration: 1–99 minutes - Suitable for dry and wet sieving, with corresponding accessories - Dimensions of base unit (W × H × D): 417 × 212 × 384 mm - Weight of base unit: approx. 35 kg Available accessories: Ten used analytical sieves according to DIN ISO, each with a diameter of 200 mm and a frame height of 25 mm. One sieve each with the following mesh sizes: 25 / 32 / 38 / 45 / 53 / 63 / 75 / 100 / 150 / 200 µm A collection tray with a diameter of 200 mm and a height of 50 mm is also included. Shipping is possible; shipping costs will be charged separately. If you are interested, please contact me.

Condition: excellent (used), A machine for screening and sorting bulk materials or small metal parts. In very good condition – complete, with original drive, control cabinet, and a set of calibration sieves. • Manufacturer: SCHWANOG Günter KG, Villingen / Black Forest • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht 0.55 kW motor, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Steel construction, stable frame with transport wheels • Three-phase 400 V power supply • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and replaceable sieves • Main switch, start/stop control, and overload protection • In very good condition – removed from a factory, mechanically functional. Iiedoz Slhzspfx Agyjh The machine is ready for operation after a basic inspection. Ideal for: metalworking plants, foundries, industrial laboratories, sorting granules, sand, or parts.

Year of construction: 2023, operating hours: 150 h, condition: like new (used), Type: GREMAC e2+ Year of manufacture: 2023 Location: Velbert (North Rhine-Westphalia) Operating hours: approx. 25 hours Available from: short notice, by arrangement Electrically powered rotary drum screen for separating excavated material, soil, stones, construction debris, or other screenable material, with an optional gasoline or diesel engine. Thanks to a maximum towing capacity of 3.5 tons, it can be towed by a car! Drive: Electric motors, alternatively via generator (gasoline/diesel) Supply voltage: 380 - 420 V / CEE-16A Drum length: 3,000 mm Drum diameter: 1,000 mm Screen area: 9.3 m² Hopper: 1.3 m³ Weight: 3,250 kg - max. 3,500 kg Towing device: Ball hitch, tow eye (40/50 mm) Mesh size: 20 mm² Iiodpfoygk Iwex Agyoh Screening technology made in Germany. Designed for a long machine lifespan. The GREMAC e2+ screening plant impresses with its hot-dip galvanized frame and high-quality materials, ensuring a long machine lifespan. Machine condition: As new Includes gasoline generator MOSA GE 13054 HBS, three-phase rated power 12 kVA / 400V Warranty The seller provides a warranty for the absence of defects corresponding to the current state of technology for a period of 3 months or 150 operating hours, whichever occurs first. Normal wear and tear, or damage resulting from improper handling, are excluded from the warranty.