Used Sell Balance for sale (3,154)

Condition: ready for operation (used), Dittel BM 2000 Balance - measuring device SN:239-5209, the housing has a small dent on the right side, see photo, used, in good condition, 100% functional, delivery as per photos Kedpfex Eq Hxsx Abcjdi

Condition: ready for operation (used), Dittel BM 2000 Balance - measuring device SN:239-5217, used, in good condition, fully functional, scope of delivery as per photos. Ksdpfx Absx Eq H Ejcodi

Condition: ready for operation (used), Dittel BM 2000 Balance – Measuring device SN:239-5228, used, in good condition, fully functional, scope of delivery as per photos Kdodpfxjx Eq Ice Abcoi

Condition: new, Balance Systems Digital Interface Balancer 9SHVM2512B N220 Card SNo. B803704, unused, 100% functional, scope of delivery as per photos Kdedei D T Dgopfx Abcsi

Condition: used, functionality: fully functional, Ohaus ARC120 Adventurer Balance. Max cap: 3100g Readability: 0.01 g Ksdpfx Abeua H Nhocodi Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² Kedpfx Aex Ein Sebcodi - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: used, Microbalance, Laboratory Balance, Precision Balance, Analytical Balance, Scale, Micro Balance METTLER TOLEDO Model XS3DU S/N 1129453969 Part No. 18.11.2.1518.756-1 Year of Manufacture: 2008 Functions: Weighing, Statistics, Formulation, Density, Percentage Weighing, Piece Counting Maximum Capacity: 3.1 g Readability: 0.01 mg Taring Range: 0 … 3.1 g Maximum Capacity (Fine Range): 800 mg Readability (Fine Range): 0.001 mg Repeatability (at nominal load): 6 μg (3 g) Repeatability (fine range at nominal load): 0.8 μg (0.2 g) Linearity Deviation: 10 μg (0.5 g) Corner Load Deviation (test load): 4 μg (1 g) Sensitivity Deviation (test weight): 45 μg (3 g) Temperature Drift of Sensitivity: 0.0001 %/°C Sensitivity Stability: 0.0001 %/a Repeatability (low load): 3 μg (0.2 g) Repeatability, fine range (low load): 0.5 μg (0.2 g) Linearity Deviation: 3 μg (3 g) Corner Load Deviation (test load): 1.2 μg Sensitivity Deviation (test weight): 9 μg (3 g) Minimum Sample Weight (USP): 6 mg Minimum Sample Weight (USP) fine range: 1 mg Minimum Sample Weight (U = 1%, k = 2): 0.6 mg Minimum Sample Weight (U = 1%, k = 2) fine range: 0.1 mg Stabilization Time: 6 s Stabilization Time (fine range): 10 s Interface Update Rate: 23 1/s Kdjdpfx Abowrtbxecsi Draft Shield Diameter: 68 mm Draft Shield Usable Height: 55 mm Weigh Pan Diameter: 25 mm - LCD Touchscreen - RS232C Interface - Printer Type RS-P42 - Tare Function Power Supply: Primary 100 – 240 V AC, 50/60 Hz; Secondary 12 V DC, 2.5 A Terminal/Display Unit Dimensions (L x W x H): 285 x 195 x 80 mm Weighing Cell Dimensions (L x W x H): 288 x 128 x 114 mm Printer Dimensions (L x W x H): 210 x 150 x 90 mm Total Weight: approx. 7 kg Good condition

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: CMT 30/STATIC, Non-rotating industrial balancer for grinding wheels, brake discs, fans, rims, etc. Automatic balancer for a wide range of applications. Kodpfxew Hwlwe Abcodi

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, TECHNICAL DETAILS Maximum balancing weight: 2,000 kg Balancing body diameter without machining unit: 10 mm Bed length: 3,000 mm Swing diameter over machine bed: 2 mm Rotor shaft via belt drive: 10 mm Drive unit balancing speed (5 gears): Max. 80 / 160 / 290 / 470 / 630 rpm Measurement method: force measuring Electronics speed measurement range: 60 to 30,000 rpm Center height measured in bed: 1,200 mm Rollers: 2x 195 x 56 mm Axle spacing: 205 mm Kedpfx Aew T Sqmsbcedi Adjustment travel: 3 mm vertical MACHINE DETAILS Drive power: 22 kW Compressed air: 6 bar Connected load: 25 kVA / 20 kW Machine weight: approx. 5,500 kg Machine dimensions approx. (L x W x H): 3.3 x 1.5 x 2.0 m Control cabinet dimensions: 6 x 610 x 21 mm EQUIPMENT - Measuring electronics PCX - Base frame (cast steel body) - Mounting length between bearing supports up to approx. 3,000 mm - Adjustment with hand ratchet via rack - Bearing supports/swing bearing blocks: 2 pieces

Condition: excellent (used), 1.0 pcs. dosing unit (two components can be dosed) Manufacturer: MOVACOLOR Type: The Balance Kedpfsxqzkpox Abcsdi There are 3.0 pcs. dosing units available.

Condition: used, functionality: fully functional, Used Schenck Balancing Machine HU 9 T with used CAB 690 H measuring unit. The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Technical data: - Maximum rotor weight with roller bearings: 50 000 kg - Maximum weight for symmetrical rotor: 56 000 kg - Load capacity per bearing pedestal: 28 000 kg - Load capacity per T-slot pedestal: 28 000 kg - Minimum rotor weight: 2 500 kg (1000 kg) - Maximum diameter over machine base: 4 000 mm - Machine bed length: 15 000 mm - Adjustable roller bearing diameters: 125–270 mm , 450–900 mm - ABB electrical drive FC: 90 kW - 4-speed gearbox: approx.120–1400 rpm - Pneumatic locking for end drive - Electrically operated movable pedestals Kdsdpfx Absw Aaugjcoi - Accuracy: Umar 0,5gmm /kg 270 rpm 1000 gmm

Year of construction: 2023, condition: as good as new (ex-display), The mobile field balancing machine from the experts The statistics are indisputable: Over half of all faults and failures of machines and systems can be attributed directly or indirectly to unbalances in rotors. The SmaRT helps you to identify an unbalance simply and accurately, and to correct it with the minimum effort. With the SmaRT, rotors of almost any size and weight can be balanced quickly, costeffectively and accurately in the installed condition, and therefore without having to dismantle the machine. The SmaRT advantages: Kdedpfomt Atdox Abcsi • Easy operation with the aid of navigation and function buttons, • Large illuminated colour display, • Standardised vibration measurement, • Assessment setup to DIN ISO 10816-3, • Simple transfer and documentation of measurement results.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 5 kg, total width: 360 mm, total length: 700 mm, Universal dynamic balancer for rotors from 10g - 5kg Kdedpfx Abjuh Svpocsi

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 10 kg, input voltage: 230 V, year of last overhaul: 2023, SCHENCK Highspeed Special Balancing Machine Type 110 MBRS for turbocharger core assemblies a for service, repair shops as well as research and development departments. The correction of the static unbalance can be performed inside the balancing machine on the compressor wheel side directly on the machine. Max balancing speed 250,000 rpm Kdodpfx Aoq I Rz Robcsi

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 30 kg, input voltage: 400 V, rotor diameter: 600 mm, year of last overhaul: 2023, power: 1.1 kW (1.50 HP), Balancing machine upgraded in 2009. 1 Machine base, welded construction 1 Balancing unit Vertical, single plane, permanently calibrated, 1 special spindle with centric flange 1 piezo-electric vibration sensor 1 3-phase drive motor of 1.5 kW, driven by a belt 1 Protractor disk 300 mm diameter, with 360 °, mounted on the spindle 1 Safety guard For diameters up to 600 mm and heights of 420 mm 1 SCHENCK CAB 803 measuring device - With direct data entry system via touch screen - Industrial PC with active TFT color monitor - Visualization of results via vector meters - Network capability - Polish dialogue Kdjdoq Umcrjpfx Abcei - Modular, easy-to-use system design - Optimized signal processing system via digital Schenck MMD filter - Intelligent, self-diagnosing measurement electronics system - Operation using standard Windows routines - Programs for: - Straight compensation, keyway, compensation index - Tolerance calculation according to ISO 1940 - Log report in PDF format Balancing speeds from 0 to 720 RPM - Smooth Max residual unbalance 5 - 10 gmm (DIN 1319)

Condition: excellent (used), Year of construction: 2014, workpiece weight (max.): 16 kg, input voltage: 230 V, year of last overhaul: 2025, SCHENCK TBsonio High Speed Balancing machine for turbocharger core assemblies Kdedsq Nin Ujpfx Abcei

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 300 kg, total width: 1,260 mm, total length: 1,500 mm, Universal dynamic balancing machine for rotors from 3 - 300kg. CAB803 measuring system, class C protection, CE mark Kdodpfx Abeu Nmppjcei

Condition: new, For sale is a Dittel MBA 2000 Mechanic balance machine. The item is new and fully functional. Item number: F20367 Serial number: 356-0629 Ksdpfx Aopky U Eobcodi Part No.: 816/118 B Shipping or pickup can be arranged at any time. If you have any further questions or are interested just contact me.

Condition: used, Year of construction: 1982, workpiece weight 60 kg Kdsdpfx Aet Hxbqjbcoi workpiece length 700 mm diameter 500 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, This listing is for a Vibra HTR-220E Balance Kedpfx Aexzg Tkobcedi

Condition: ready for operation (used), Do you want to sell your envelope inserter mailing inserting machine? Caontact UMS for a quick deal and fair price! Kdjdpfjdwh U Ajx Abcsi

Condition: not inspected (used), Do you want to sell your envelope inserter mailing inserting machine? Caontact UMS for a quick deal and fair price! Kdodpfx Aeff Hdzsbcei

Condition: used, Year of construction: 1998, workpiece weight 150 kg workpiece length 2500 mm diameter 160 - mm balancing speed variable 100 - 3000 U/min dia. axle journal 160 - 350 mm voltage 400 V Kdedpfx Ajwcg Elebcoi total power requirement 1,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 7,50 x 1,30 x 1,60 m Control 0,60 x 0,60 x 1,85 m Software TIRA X9000 Operating System Windows XP Software update 2007 Serial No.: R 32/98 Max display sensivitiy: 0.5 gmm Balancing speed 100 - 3000 RPM

Condition: used, This listing is for the Sartorius Tare ENTRIS2201-1S Balance + Tare Printer The unit is in full working condition and is ready for immediate use The Sartorius ENTRIS2201‑1S (also referred to as ENTRIS 2202‑1SUS in some regions) is a precision top-loading laboratory balance designed for reliable, accurate weighing of samples up to approximately 2,200 g with 0.01 g readability. Key Specifications: Capacity: 2,200 g Readability (Resolution): 0.01 g (10 mg) Repeatability: Typically 0.01 g Linearity: Approximately 0.03 g Weighing Pan Size: Around 182 mm × 182 mm (7.1″ × 7.1″) Calibration Type: External calibration (requires separate calibration weight) Display: Backlit, high-contrast screen for clear visibility Kodpoxui S Ajfx Abcsdi Interface Options: RS‑232 port for communication with PCs or printers Built-In Functions: Includes modes for basic weighing, counting, percent weighing, animal weighing, and density determination Language Support: Multiple languages supported such as English, French, German, Italian, Polish, Russian, Spanish Other Features: Anti-theft locking capability, easy-to-clean removable pan and draft shield Stabilization Time: Approximately 1.5 seconds Dimensions & Build: Compact size, robust design ideal for lab environments

Condition: used, This listing is for a Sartorius Combics 3 Balance The unit is in full working condition and is ready for immediate release The Combics 3 is described as a weighing terminal / indicator rather than the weighing pan or scale itself. It is designed to connect to one or multiple load‑cells / scales and manage/control them. Housing: It uses a stainless‑steel enclosure rated IP69K, meaning it is highly resistant to dust and powerful water jets — suitable for very demanding industrial or hygienic environments (food, pharma, chemical production). Kodpfx Abjxv Abgocedi Display & Interface: Has a back‑lit graphical LCD display for clarity in industrial conditions. Connectivity/Interfaces: Comes with standard communication ports (for example RS‑232) and various optional ones such as RS‑485, Profibus-DP, Ethernet TCP/IP, Modbus TCP, and analog/digital I/O for integration into automated systems. Multi‑scale support: Capable of managing up to three scales simultaneously. This allows e.g. combining inputs or workflows from multiple platforms. Applications: The terminal supports a number of weighing‑related functions: piece counting, recipe/formulation support (multi‑component weighing), target weight monitoring, classification, dynamic weighing (items in motion), percentage weighing, etc. Traceability & certification: Optional alibi memory (for trace logging of weighing data) is available, supporting compliance requirements (GMP, ISO, ATEX in some cases) for industrial/regulated environments.