Used Vertical Surface Grinder for sale (14,440)

Condition: used, Lumsden 92 ML Vertical Spindle Rotary Surface Grinder , 48 Inch dia chuck, autosizing, table jog facility, Filtermist unit fitted with (2) extraction vents to rear of table guards, fitted with segmented wheel, serial number 92ML/109/11821. Machine tools manuals. Coolant filtration tank. Also with unused grinding stones segmented. Csdpfxeyabc Ee Afpspu Table Diameter 48″ / 1219mm, Segmental Wheel Dia. 28” / 711mm, Max. Height Capacity 22.5″ / 572mm, Spindle Speed 550rpm, Table Speed 6 & 18rpm, Auto Feed 0.004-0.04 ins/min – 0.1-1.0 mm/min, Spindle Motor 50HP / 35Kw, Floor Space 14′ x 11′ / 4394 x 3353mm, Approx. Net Weight 12T/12200Kg, Approx. Gross Weight 13.5T /13700Kg

Condition: good (used), Year of construction: 2001, Machine-Details: Stock-No. 1022-2276 Type of machine Surface Grinding Machine - Vertical Make REFORM Type AR 42 Typ 19 CNC Year of manufacture 2001 Type of control CNC Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW weight of the machine ca. 50,0 t Additional information: Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed Cpjdjyhcxqjpfx Afpeu * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm

Condition: ready for operation (used), additional equipment features: yes, Besturing: Siemens Sinumerik 840 C Siemens-aandrijving: 6SN1145-1BA00-OCAO Worklength with magnetic table: 1230 mm Worklenth without magnetic table: 1260 mm Grindingwidth: 600 mm Longitudinal travel X-axis (autom.): 1260 mm Cross-travel Y-axis (autom.): 630 mm Travel Z-axis (autom.): 477 mm Dimensions of the table: 1215 x 500 mm Distance between table -- spindlecentre: 680 mm Max dia grindingstone: 406 x 50 x 127 mm Csdpfx Aexuwxwofpspu Spindlespeeds: rpm Motorpower: 22 kW Cooling system: yes

Condition: ready for operation (used), Elb SWE 6 VA II Worklenth without magnetic table: 600 mm Grindingwidth: 400 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 400 mm Travel Z-axis (autom.): 450 mm Dimensions of the table: 1100 x 450 mm Dimensions magnetic table: 700 x 200 mm Max dia grindingstone: 300x50x76 mm Spindlespeeds: 1400 x 1800 rpm Motorpower: 5.5 kW, total 13 kW Tension needed: 400V Cpjdpfsx Dd Idjx Afpsu

Condition: excellent (used), Jung JF 625 surface grinder in very good condition. The machine enables precise surface machining. Sturdy construction and reliable operation. Ideal for workshops of all sizes. Safe loading on our side. Short video showing the machine in operation: ?si=JufmHYi6Q27ELJXR Technical data: Grinding width: 250 mm Grinding length: 600 mm Magnetic table: 250x600 mm Cjdpfx Aoya Izzjfpspu Max. table to spindle height: 500 mm Grinding wheel size: 300x30x76.2 mm Machine weight: 2500 kg

Condition: used, STÖCKEL FNX 640 ST-2 is a NC Surface grinder, engineered for precision, high accuracy and reliability. Capacities: grinding length 600 mm, grinding width 400 mm, grinding height over table 530 mm; table speeds up to 35 m/min. Main technical specifications: grinding spindle motor 7.5 kW; voltage 50 Hz 3x 400 V; machine weight approx. 3600 kg; overall dimensions L 3000 × W 2500 × H 2300 mm. Delivers tight tolerances and is suited to applications in automotive, aerospace, machine tools, medical and watchmaking. Codoychhaspfx Afpepu

Condition: used, total height: 1,700 mm, total length: 2,300 mm, total width: 1,500 mm, Empty weight: 2.000 kg - Documentation available: No - CE certificate present: No - Serial number: OF50-158 - Drive system: Conventional - Power [kW]: 2.6 - X-axis travel [mm]: 500 - Y-axis travel [mm]: 200 - Z-axis travel [mm]: 400 - Table width [mm]: 720 - Table depth [mm]: 200 - Magnet width [mm]: 400 - Magnet depth [mm]: 140 Cpjdpfxjwnings Afpeu - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 4000 - Options: Digital readout - └ Type of digital readout: VisoData - Control: Conventional - Motor power: 2.0kW - Transport dimensions: 2300mm x 1500mm x 1700mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1998, Empty weight: 21.000 kg Cedpox E Ukusfx Afpopu Price: On request - Year: 1998 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 430290898 - Drive system: CNC - Power [kW]: 60.0 - X-axis travel [mm]: 1500 - Y-axis travel [mm]: 900 - Z-axis travel [mm]: 550 - Table width [mm]: 2000 - Table depth [mm]: 900 - Magnet width [mm]: 1500 - Magnet depth [mm]: 800 - Max. spindle speed [rpm]: 3000 - Options: Filter system - Control type: Unicon - Motor power: 60.0kW - Transport weight [kg]: 21000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1998, total height: 2,500 mm, total length: 5,900 mm, total width: 3,000 mm, Empty weight: 6.700 kg Price: On request - Year: 1998 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 199851086/1098 - Drive system: Conventional Cjdpfxsx E Ukno Afpopu - Power [kW]: 11.0 - X-axis travel [mm]: 1200 - Y-axis travel [mm]: 680 - Z-axis travel [mm]: 400 - Table width [mm]: 1600 - Table depth [mm]: 670 - Magnet width [mm]: 1200 - Magnet depth [mm]: 600 - Control: Conventional - Motor power: 11.0kW - Transport dimensions: 5900mm x 3000mm x 2500mm (l x w x h) - Transport weight [kg]: 6700kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), empty load weight: 3,300 kg, additional equipment features: Diamant tools, + afzuiging + koelmelk groep Grindingwidth: 375 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 375 mm Travel Z-axis (autom.): 350 mm Dimensions magnetic table: 600 x 350 mm Max dia grindingstone: 300 x 50 x 76.2 mm Spindlespeeds: 2900 rpm Cedpexp Skdefx Afpopu Motorpower: 9 kW Tension needed: 400V Cooling system: yes

Condition: good (used), Year of construction: 2001, Table work area : 850×400 mm Table travel distance : 950×440 mm Distance table top to wheel bottom : 47.5 – 547.5 mm Csdpfewuglvsx Afpepu Standard chuck size : 800×400×105 mm Max workpiece weight : 700 kg (230 kg sur plateau magnétique) T-Slots (W×No.) : 17×3 Longitudinal feedrate : 3 – 25 mm/min Crosswise feedrate : 1 – 1000 mm/min Vertical feedrate : 1 – 1000 mm/min Min input increment (vertical) : 0.0002 mm Grinding wheel O.D.×W×I.D. : 355×38×127 mm Grinding wheel speed : 1500/1800 r.p.m. Wheel spindle drive motor : 3.7 / 4 kW Vertical feed motor : 0.3 kW Cross feed motor : 0.3 kW Hydraulic pump motor : 2.2 / 4 kW Air-cooled oil cooler motor : 90 / 105 W Floor space (L×W×H) : 3310×2228×2713 mm Machine weight : 4000 kg Specifications are subject to change at any time without prior notice. No liability shall be assumed for errors or omissions.

Condition: used, total width: 660 mm, total length: 2,900 mm, total height: 1,400 mm, Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - X-axis travel [mm]: 2500 - Magnet width [mm]: 2050 - Magnet depth [mm]: 200 - Options: Tiltable magnet, Knife Sharpener - Transport dimensions: 2900mm x 665mm x 1400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Cpodpfxjx U Duuo Afpeu Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, Tabletop version -High performance -Belt grinding attachment height adjustable from 0-90° -Maximum usable surface grinding surface -Belt adjustment with fine adjustment Combined belt grinder/sander -Longitudinal stop for material guidance -Perfectly balanced and low-vibration -Double-sided connection for dust extraction Ø 50 mm -Motor protection switch with undervoltage release -Fixed stop -1 standard sanding belt (brown), grit 80 -1 sanding disc 250 x 40 x 51 mm, grit 80 -Spark arrester -Connection cable with CEE plug Additional charge for special equipment/options: - Machine stand, emergency stop push button, brake, and extraction system / €2,260 (Item 330.370) - Machine stand, emergency stop push button and brake / €1,030 (Item 330.365) - Machine stand with water immersion tank / €360 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? Cpedpfx Ashhiaaofpeu WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: excellent (used), Year of construction: 1989, As-new, precision, gently-used bore and cylindrical grinding machine for sale due to lack of use! Cedpfxsx S Upwj Afpepu

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 600 mm, feed length Y-axis: 220 mm, feed length Z-axis: 540 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 3,000 m/min, table length: 400 mm, table load: 250 kg, table width: 250 mm, Surface grinder Ziersch - ZT 24 MACH-ID 9344 Make: Ziersch Type: ZT 24 Control: Mitsubishi TOUCH Panel Year: 2010 Sturdy, cast iron execution of all machine components High machine weight for maximum rigidity Preloaded precision linear guideways in the vertical- and cross axis (Bosch Rexroth) for highest accuracy Scraped and turcite coated slideways in the longitudinal axis provide excellent vibration absorption and a high-quality grinding surface pattern. Hydraulic longitudinal motion with return cooling unit to achieve good surfaces Electro-mechanic cross- and vertical motion Measuring systems in vertical axis (Heidenhain) for precise positioning Maintenance-free paper band filtration unit with up to 500 l tank and 2-bar pressure pump for effective cooling and rinsing Integrated rinsing channel Magnetic separator for prefiltration of the paper band filtration unit Infinitely variable grinding spindle motor Machine lamp Table-mounted dressing device for high precision and surface finish Electro-permanent magnetic chuck (SAV) with integrated pole changing unit and traction regulation Partial encapsulation of the machine with sliding door and a service door Effective splash guard and an excellent accessibility Preparation of the machine for installation of a coolant mist exhaust unit Cpsdpfx Afex Sw H Eepsu Control system features: Very comfortable and easy to operate Z-control Automatic vertical infeed with dressing amount compensation Fully automatic grinding cycle with dressing cycles Easy operation via touchscreen Large and clear colour screen (10.4") Electronic handwheel, usable in vertical- and cross axis X - Travel: 600mm Y - Travel: 220mm Z - Travel: 540mm Table Length: 400mm Table Width: 250mm Table load: 250 Feed rate X-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Grinding stone dimensions:250 x 38 x 50,8mm Power: 3,7kW Speeds: 4500Rpm Cooling system: Yes Feed rate Y-Axis: 30000mm/min. Length: 3050mm Width: 2050mm Height: 2510mm Weight: 2900kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Vermogen slijpsteen: 15 kWt Besturing: Siemens Sinumerik 840 C Siemens drive: 6SN1145-1BA00-OCAO Worklength with magnetic table: 1270 mm Cpjdpfxoxl Hxhe Afpeu Grindingwidth: 610 mm Longitudinal travel X-axis (autom.): 1310 mm Cross-travel Y-axis (autom.): 565 mm Travel Z-axis (autom.): 470 mm Dimensions of the table: 1215 x 500 mm Distance between table -- spindlecentre: 680 mm Max dia grindingstone: 400 x 100 x 127 mm Spindlespeeds: rpm Motorpower: 30 / 47 kWt Tension needed: 380V - 50Hz Cooling system: yes

Condition: excellent (used), Year of construction: 1991, feed length X-axis: 470 mm, feed length Z-axis: 400 mm, table length: 450 mm, table load: 100 kg, table width: 150 mm, Auto cyclus with down feed Coolant system Digital read out system positioning axis Digital read out system feed rate / rapid Cedpfx Afex R Su Ispepu X - Travel: 470mm Y - Travel: 171mm Z - Travel: 400mm Table Length: 450mm Table Width: 150mm Table load: 100 Feed rate X-Axis: 25000mm/min. Feed rate Z-Axis: 5000mm/min. Grinding stone dimensions:200 x 19 x 31,75mm Power: 1,5kW Speeds: 2640Rpm Cooling system: Yes Length: 2000mm Width: 1200mm Height: 1800mm Weight: 1200kg

Condition: used, total height: 2,150 mm, total length: 3,200 mm, total width: 1,900 mm, Empty weight: 3.500 kg - Documentation available: No - CE certificate present: No - Serial number: 179997 - Drive system: Conventional - Power [kW]: 4.0 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 350 - Z-axis travel [mm]: 500 - Table width [mm]: 1100 - Table depth [mm]: 350 - Magnet width [mm]: 1000 - Magnet depth [mm]: 300 - Max. grinding wheel diameter [mm]: 300 - Motor power: 4.0kW - Transport dimensions: 3200mm x 1900mm x 2150mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Cpodpfxsx A Tudj Afpsu VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,650 mm, total length: 4,700 mm, total width: 2,100 mm, Empty weight: 5.500 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - X-axis travel [mm]: 1500 - Y-axis travel [mm]: 800 - Z-axis travel [mm]: 700 - Table width [mm]: 1200 - Table depth [mm]: 400 - Magnet width [mm]: 1200 - Magnet depth [mm]: 300 - Options: Digital readout - └ Type of digital readout: Heidenhain Cedex Dkggepfx Afpepu - Transport dimensions: 4700mm x 2100mm x 2650mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,700 mm, total width: 2,000 mm, total length: 4,500 mm, Empty weight: 12.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Table width [mm]: 1000 - Magnet width [mm]: 1000 - Options: Digital readout - └ Type of digital readout: Newall 2-A - Control: Conventional - Transport dimensions: 4500mm x 2000mm x 2700mm (l x w x h) - Transport weight [kg]: 12000kg - Transport packages [pcs.]: 3 Financial information Cpedpfxew A Nglo Afpeu VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1986, total height: 1,900 mm, total length: 2,300 mm, total width: 2,200 mm, Empty weight: 2.000 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 86721 - Drive system: Conventional - Power [kW]: 1.5 - X-axis travel [mm]: 700 - Y-axis travel [mm]: 400 - Z-axis travel [mm]: 400 - Table width [mm]: 900 - Table depth [mm]: 350 - Magnet width [mm]: 350 - Magnet depth [mm]: 700 - Max. grinding wheel diameter [mm]: 250 Cpsdpfsw E If Eex Afpeu - Control: Conventional - Motor power: 1.5kW - Transport dimensions: 2300mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,000 mm, total length: 1,900 mm, total width: 1,700 mm, Empty weight: 1.500 kg Price: On request - Documentation available: No - CE certificate present: No - Serial number: 12389 - Drive system: Conventional - X-axis travel [mm]: 670 - Y-axis travel [mm]: 250 - Z-axis travel [mm]: 400 - Table width [mm]: 800 - Table depth [mm]: 200 - Magnet width [mm]: 630 Cpedpfxowh Npko Afpju - Magnet depth [mm]: 200 - Max. grinding wheel diameter [mm]: 240 - Control: Conventional - Transport dimensions: 1900mm x 1700mm x 2000mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,000 mm, total length: 2,600 mm, total width: 1,800 mm, Empty weight: 3.500 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 4.5 - X-axis travel [mm]: 600 - Y-axis travel [mm]: 350 - Z-axis travel [mm]: 510 - Table width [mm]: 800 - Table depth [mm]: 350 - Magnet width [mm]: 600 - Magnet depth [mm]: 350 - Max. grinding wheel diameter [mm]: 350 - Control: Conventional - Motor power: 4.5kW - Transport dimensions: 2600mm x 1800mm x 2000mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Codsxpgwrepfx Afpjpu Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: like new (used), Year of construction: 2022, operating hours: 1,034 h, functionality: fully functional, machine/vehicle number: 26128, Okamoto OGM 250 UNC III Machine Characteristics: - OKAMOTO touch-screen NC controller with advanced OKAMOTO software - 2-axis interpolation - Step (shoulder) automatic probe for setting starting reference and face grinding - Automatic wheel dressing with automatic compensation - Up to 21 programs can be stored - 6 types of grinding cycles, up to 10 steps each - 5 types of wheel dressing cycles - Zero point measuring device and air gap measuring device (optional) - Extremely rigid, stress-relieved cast iron bed construction - Double V-type prismatic slideways, only OKAMOTO machines are manufactured this way (with unique hand-scraped surfaces) Technical Data: Capacity - Max. swing diameter over table: Ø 220 mm - Distance between centers: 500 mm - Max. grindable diameter: Ø 200 mm - Max. workpiece weight between centers: 50 kg - Max. workpiece weight in chuck, gross: 20 kg - Grinding wheel size for universal grinder: Ø305 mm x 50 mm x Ø127 mm - Max. peripheral speed (with inverter): 45 m/sec - Wheel spindle X-travel: 215 mm - Universal swiveling range: +/- 30° - Diameter resolution: 0.0001 mm - Rapid traverse in diameter: 4 m/min - Table Z-travel: 762 mm - Swivel angle: 0° ~ -9° - Resolution: 0.0001 mm - Rapid traverse: 8 m/min - Workhead type: fixed and rotating centers, taper MK3 - Workhead bore diameter: Ø18 mm, speed 10 – 500 rpm - Swivel angle - universal: 30°/ -90° - Tailstock sleeve stroke: 20 mm, sleeve taper MK3 - Motors: Wheel spindle 3.7 kW, workhead AC servo 1.8 kW, table feed AC servo 1.2 kW, wheel feed AC servo 1.2 kW - Total power requirement: 15 kVA - Machine dimensions: length 3,400 mm, width 2,330 mm, height 1,950 mm - Net weight: 3,300 kg Standard grinding and wheel dressing software features: - 10-step automatic grinding cycle - Straight wheel dressing cycle - Plunge oscillation grinding cycle - Offset plunge (roughing) + cross-feed finishing grinding cycle - Shoulder wheel dressing cycle for both left and right sides - Profile wheel dressing cycle, programmable in ISO G-code - Grinding cycle for workpiece shoulders, left and right sides Standard Accessories: - Grinding wheel Ø305x50xØ127 mm (UNC III), 1 pc - 2 wheel arbors - 3.7 kW spindle motor - Max. grinding wheel peripheral speed: 45 m/sec - Speed controller for workhead spindle - FANUC 0i D CNC control (simultaneous 2-axis) - 10.4" color OKAMOTO controller – vertical and cross-feed display - Graphical teach software for creating grinding and dressing cycles - Complete Fanuc push-button panel for ISO G-code programs with corner radius compensation - Electronic handwheel (graduations: x1/x10/x100) - Rapid traverse control lever (joystick) for cross and longitudinal directions - Enclosed guard with safety interlocked sliding door - LED machine lamp - Automatic lubrication during operation - Coolant nozzles and piping - Coolant system for wheel dressing - Permanent coolant installation to the table - Carbide centers - Step (shoulder) positioning device and software - Gap sensor and software - Leveling screws and base plates - Tool kit - Operating manual - CE version - Table rotation measuring device - Coolant system with paper filter, DGS, 200 l - Rinsing gun - 2-point manual steady rest - 130 mm manual chuck with backplate - Motorized tailstock sleeve with foot pedal Cedpfx Asx R Tw Rjfpspu - Status lamp (green/yellow/red) - Balancing arbor - Spare wheel arbor

Condition: used, Surface grinder, TOS BPH 20 NA, Used machine Manufacturer: TOS Type: BPH 20 NA Overall dimensions: Cpjdpfxox Hgvle Afpeu Width: 1820 mm Depth: 1540 mm Height: 1800 mm Electrical data: 380V; 50Hz Table size: 835 × 250 mm Magnetic table size: 650 × 250 mm Maximum grinding width: 250 mm Maximum workpiece height: 350 mm Max. table load: 180 kg Grinding wheel: 260 × 35 mm Machine weight: approx. 1600 kg Accessories: Coolant system Magnet chuck mounted on the table (650 × 250 mm)