Used Semi Automatic Bandsaw for sale (27,800)

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Podpfx Aiopu R Nvoregu Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Condition: good (used), Year of construction: 2004, I sell the semi-automatic finger joint line GreCon Profijoint PJ7/6100-LI. Year 2004. Input length 100-1.000mm Input width 40-150mm / 510mm in 1 step Pgsdpfx Aiemig Tdjreu Input thickness 20-50mm Automatic finger joint unit with glue spraying 1 side Automatic turning of the material for the 2nd pass on turning table Automatic feeding to the press Press 3,00 - 6,10m with automatic cycle and end-cutting saw Total area covered 10.50 x 3.50 m Strong construction. Very good condition. Available immediately.

Condition: used, Year of construction: 2008, Manufacturer: COMEC Model: FUST-P-40 Year: 2008 Pgodpfoz Ic Nfjx Airju Type: Semi-automatic filling line Containers: Drums, cans, off-centre-neck containers Max. container height: 500 mm Theoretical output: 200 x 20-litre containers per hour Dosing method: Weight-based, using a load cell Weighing range: 0.5 to 30 kg Accuracy: 10 g Calibration: Automatic Filling speeds: 2 (high flow rate / low flow rate within the same cycle) Filling spout: With anti-drip valve Conveying: Roller conveyor Capping: Manual placement, tightened using a hand-held pneumatic screwdriver Control: Control panel FAP-200/1 type feed unit - Filter (cylindrical coil): 500 microns - Pneumatic diaphragm pump - Flow rate: 2 to 4 m³/h - Transport trolley Documentation: Available Video: On request

Year of construction: 2026, condition: new, Our KVK 3 Slim Line is a semi-automatic stretch wrapper with turntable. It is equipped with a pre-stretch system for 250% stretching. Thanks to the pre-stretch system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal contact tension, so that even light packages are not pulled off the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 3 Slim Line has a 1500 mm turntable and can wrap pallets up to 2250 mm high as standard. With adjustable speeds for the turntable and film carriage, as well as a potentiometer-controlled power stretch unit, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Pgedpfx Aiez E Iwisreu Programs for "up & down" (cross wrapping) and "rainproof" wrapping are available. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A suitable drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. This model is our clear recommendation if you wrap very light packages or wrap more than approx. 20 pallets a day and do not exceed a maximum pallet dimension of 800 x 1200 x 2250 mm. For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: new, Year of construction: 2026, overall weight: 280 kg, total length: 23,740 mm, total width: 15,000 mm, total height: 20,750 mm, input voltage: 230 V, warranty duration: 12 months, About this machine: This machine comes with a 24-month warranty. Upon request, we can also supply you with a suitable loading ramp, a photoelectric sensor for black object detection, or the appropriate machine film! Pgodpfx Aiez E Ikverju About this model: Our "Starter" pallet wrapper is a semi-automatic stretch wrapper, perfect for those who no longer want to wrap pallets by hand or are seeking an affordable backup unit. Our Vogel Starter is likely the most economical pallet wrapper produced in Europe, without compromising on quality. In contrast to our other pallet wrappers, the range of options on this model is limited, as our aim here was to design a highly standardized pallet wrapper that covers most applications at a cost-effective price. With three programs, you can set both the speed of the film carriage and the turntable, and choose between “cross wrapping” or “up only” wrapping. Top and bottom wraps can also be saved to each program. The brake tension is easily adjusted via the mechanical film brake. Access to the programs can be password-protected, allowing the operator to choose only from the saved settings. This model weighs 280 kg and is rated for loads up to 1200 kg. Our Starter pallet wrappers feature a 1500 mm turntable and can wrap pallets up to 2100 mm high as standard. Automatic pallet detection (using a photoelectric sensor) comes standard, as do adjustable top and bottom wraps. Should the wrapper need to be relocated, it can be easily lifted and moved with a forklift using the integrated fork slots. This model is our recommendation if you want to move away from manual wrapping and are looking for a robust machine made in Europe. About us: Business is about people – that is our conviction! A supplier delivers the goods you order – a partner does more: they help you find the best solution. They support you in achieving your goals! They also stand by your side when problems and challenges arise. That is our philosophy. For over 40 years and now in the 4th generation, we have been the partner to small and medium-sized enterprises when it comes to “stretch wrapping and adhesive bonding.” If you wish, we are happy to advise you on which pallet wrapper from our portfolio best fits your requirements!

Condition: new, Year of construction: 2026, overall weight: 280 kg, total length: 23,740 mm, total width: 15,000 mm, total height: 20,750 mm, input voltage: 230 V, warranty duration: 12 months, About this machine: This machine comes with a 24-month warranty. Upon request, we can also supply you with a suitable loading ramp, a photoelectric sensor for black object detection, or the appropriate machine film! About this model: Our "Starter" pallet wrapper is a semi-automatic stretch wrapper, perfect for those who no longer want to wrap pallets by hand or are seeking an affordable backup unit. Our Vogel Starter is likely the most economical pallet wrapper produced in Europe, without compromising on quality. In contrast to our other pallet wrappers, the range of options on this model is limited, as our aim here was to design a highly standardized pallet wrapper that covers most applications at a cost-effective price. With three programs, you can set both the speed of the film carriage and the turntable, and choose between “cross wrapping” or “up only” wrapping. Top and bottom wraps can also be saved to each program. The brake tension is easily adjusted via the mechanical film brake. Access to the programs can be password-protected, allowing the operator to choose only from the saved settings. This model weighs 280 kg and is rated for loads up to 1200 kg. Our Starter pallet wrappers feature a 1500 mm turntable and can wrap pallets up to 2100 mm high as standard. Automatic pallet detection (using a photoelectric sensor) comes standard, as do adjustable top and bottom wraps. Should the wrapper need to be relocated, it can be easily lifted and moved with a forklift using the integrated fork slots. This model is our recommendation if you want to move away from manual wrapping and are looking for a robust machine made in Europe. About us: Business is about people – that is our conviction! Pjdpfxsz E Ilyj Airsgu A supplier delivers the goods you order – a partner does more: they help you find the best solution. They support you in achieving your goals! They also stand by your side when problems and challenges arise. That is our philosophy. For over 40 years and now in the 4th generation, we have been the partner to small and medium-sized enterprises when it comes to “stretch wrapping and adhesive bonding.” If you wish, we are happy to advise you on which pallet wrapper from our portfolio best fits your requirements!

Condition: new, Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm Introductory special price Includes: - Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm SAFE - SOLID - FAST The compact, simple, robust and innovative machine guarantees maximum safety, flexibility and reliability. Standard accessories: - Automatic protection and pressure device - Ergonomically positioned 2-hand control - Protective shield, rigid - incl. HM saw blade 500 mm Z = 108 Technical data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm Rotation speed: 2,800 rpm. Compressed air: max. 8 bar Air consumption per cycle: 5 Nl Extraction nozzle: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Minimum distance between stop (left side) and saw blade: 70 mm Minimum distance between stop (right side) and saw blade: 520 mm Minimum distance between 2 stops (optional): 60 mm Note: Basic price without roller conveyors. When setting up the saw, a support table or roller conveyor must be installed at least 1 m to the left and 1 m to the right of the saw. Included: - Roller conveyor without scale on the right, per meter Pgsdevtrkispfx Airsu Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: 1 m and 2 m long roller conveyors can be retrofitted. Include: - Roller conveyor with stop ruler and scale on the left, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: The stop must be ordered separately. 1 m and 2 m long roller conveyors can be retrofitted. Include: - Pneumatically pivoting stop with 200 mm length - new exhibition machine -

Condition: new, cutting area - round: 320saw band dimension: 4160 x 34 x 1,1cutting area 45°: 320cutting area rectangle: 610 x 320cutting area 45° mitre flat: 355 x 320cutting speed: 20-100messurements (LxWxH): 2100 x 1200 x 1350weight approx.: 1200 KK Kletzer UBS-S 320 GL  Semi automatic Bandsaw Mitre Head  Heavy duty Structural steel machine   Standard Accessories: - M42 Bi-metal saw blade   - *Variable speed  - Inverter control device - Coolant system - Auto. saw blade breakage power off system - Hydraulic vice - Hydraulic Bow - Blade tension Device - Pendant control Pgodpfxorz Uzio Airou - Mitre Vice  - Heavy Duty Gear Box 

Condition: new, Year of construction: 2026, overall weight: 260 kg, total length: 25,080 mm, total width: 15,000 mm, total height: 24,250 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our pallet wrapper "Basic" is a semi-automatic stretch wrapper from Eurapa production, which guarantees absolutely consistent results due to up to 10 storable programs and thus offers the safe exclusion of the "human factor". With the electromagnetic brake, the tension of the film can be adjusted to your requirements and saved in the programs. The programs also allow you to set how fast the film carriage and turntable run. Head and foot windings can also be saved for each program. In this way, you can store individual programs for each wrapping pattern to achieve perfect wrapping results every time. With a weight of 260 kg, this model is suitable for loads of up to 1200 kg. Our Basic pallet wrapper has a 1500 mm turntable and can wrap pallets up to 2000 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course, as are adjustable head and foot wraps. If the wrapper needs to be used at a different location in the meantime, it can be easily lifted and moved with a forklift truck via integrated cut-outs. This model is our recommendation if you want a good and affordable pallet wrapper that can be adapted to your needs. Pgodpfxsz E Il Ho Airou About us: Business is done between people - we are convinced of that! A supplier delivers the ordered goods - a partner can do more: he helps you to find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Year of construction: 2004, condition: ready for operation (used), A fully automatic Kasto band saw system is available. Cutting range at 90°: round material: 530mm, square material: 530mm/530mm, flat material: 530mm/640mm, saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions X/Y/Z: approx. 5200mm/2700mm/2700mm, weight: approx. 6000kg. Including roller conveyors. Documentation available. On-site inspection is possible. Pgodpfxjv S E Edj Airou

Condition: used, Year of construction: 1988, Manufacturer : OLI Model: 210 Year : 1988 Type : Semi-automatic side loading case packer Application : To insert grouped cartons of regular shapes into shipping cartons Carton infeed and grouping : automatic Empty box loading: manual Infeed conveyor Outfeed roller conveyor Factory voltage: 220 / 380 V Control voltage: 24 V Max. pressure: 6 bar   Pgedpfox R Dhgex Airou Current format: see illustration, adaptation can be quoted separately.

Condition: used, - Brand: GECOMA Pgsdpfey N Sp Aex Airou - Model: SMART 11 - Type: bread slicer - Version: semi-automatic - Serial No.: 13 SM 411 026 - Year: 03/2013 - Slice width: 42 cm - Slice thickness: 11 mm - Useful passage: 42 cm - Passage height: 15 cm - Cutting depth: 32 cm - Maximum output: 200 loaves/hour - Power supply: 400 V three-phase - Power: 0.55 kW - On stand/base - Operation: right or left hand - Bagging: ergonomic tray - Integrated crumb drawer Inclined loading table, allowing fully front-facing operation. • Assisted traction technology "Softlift". A transverse bar replaces the classic side lever: • Advantages: Reduced effort. Can be used with right or left hand, or two-handed operation. • Compact footprint, allowing perfect integration in a cabinet. • Balancing of mechanical stresses. • Bagging tray at ergonomic height. • Integrated crumb collection drawer. • Various base options available.

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK BS530H – Professional Tool for Cutting Pipes and Profiles The CORMAK BS530H metal cutting band saw is a high-performance semi-automatic band saw designed for precise cutting of steel components, pipes, and profiles at various angles. Its robust cast iron construction, reinforced blade guiding system, and advanced hydraulic technology make it an ideal solution for serial production and demanding industrial environments. The integrated control panel allows a single operator to manage all machine functions, significantly reducing operating time and improving work ergonomics. Main advantages of the machine Semi-automatic operation – hydraulic lifting and lowering of the saw arm and vice control via the control panel. Worm gear transmission with bronze components – ensures smooth, precise operation without vibrations. Stepless cutting speed adjustment from 20–70 m/min – allows adaptation to various materials and cutting conditions. Carbide blade guides with roller bearings – provide durability and highly accurate blade tracking. Quick-clamping vice – manually or hydraulically operated, with left/right positioning capability. Angular cutting from -45° to +60° – with precise angle reading on the scale. Durable cast iron body – guarantees cutting stability and long machine service life. Hydraulic arm lowering adjustment – allows precise control and setting of the return height. Construction and technology The BS530H model features a reinforced drive system and industrial hydraulic components, ensuring reliable operation even under intensive working conditions. The heavy-duty cast iron body reduces vibrations and provides smooth, consistent performance. The ergonomic control console allows all operations to be managed from a single location. The coolant system integrated into the machine base effectively removes heat and contaminants, protecting the blade from overheating and premature wear. Precision and work efficiency Thanks to stepless speed adjustment, manual or semi-automatic operating modes, and the use of a dial tension gauge for monitoring blade tension, the BS530H metal cutting band saw ensures repeatable results and high cutting quality even during long production runs. Pedpfxow U Svle Airogu Work efficiency is further improved by the front material support roller and the arm locking system, which increases operator safety after completion of the cutting cycle. Applications The machine is designed for: industrial production plants, metalworking workshops, companies performing serial cutting of profiles, pipes, and solid steel sections. It is ideal for serial production, steel fabrication, and preparing components for welding or further processing. Standard equipment Control console with semi-automatic functions Hydraulic vice Powered blade cleaning brush Coolant system with pump Front material support roller Dial blade tension gauge CE declaration and technical documentation (DTR) Optional equipment Additional material guide rollers Semi-Automatic Metal Cutting Band Saw CORMAK BS530H Technical data Parameter Value Working height 965 mm Cutting speed 30–80 m/min Saw blade dimensions 3770 × 34 × 1.1 mm Coolant system power 0.1 kW Total motor power 3.0 kW Power supply 400 V Machine dimensions (W × D × H) 2200 × 1400 × 2050 mm Weight 730 kg

Condition: used, Die halbautomatische Verschlussmaschine RLC1 ist für die Verpackung von Glasflaschen mit 26 oder 29mm Kronkorken geeignet. Die Schließeinheit kann auf Kronkorken von 26 oder 29mm Durchmesser verwendet werden. Wenn man beide Durchmesser braucht, wird eine zusätzliche Schließeinheit geliefert. Der Schließkopf der Kronkorken ist aus gehärtetem Stahl, und auch im Laufe der Zeit ist er verschleißfest. Die Schiene führt die Kronkorken in der richtign Position. Die spezifische Form der Schiene wird spezifisch für die Kronkorken aus Edelstahl 304 gebaut. Diese enthält eine kleine Menge Kronkorken, die manuell eingegeben werden können. Die Schließeinheit zieht die Kronkorken aus der Schiene heraus und steckt sie in den Schließkegel. Auf Anfrage kann man einen Trichter einbauen, um eine größere Menge Kronkorken einzugeben. Den EG-Normen entsprechend startet der Verschlussprozess mit dem gleichzeitigen Drücken von zwei Tasten. Nach der Positionierung der Flasche auf den Halter, fängt der Verschlussprozess an, die Schließeinheit sinkt auf die Flasche und verschliesst der Kronkorken, automatisch kehrt die Schließeinheit zurück. Pgodpfxoz N Efae Airju Maße: L 0,41m H 1,96 m B 0,41 m Gewicht ca. 80kg Gewicht mit dem automatischen Trichter:140kg Max Durchmesser der Flasche 220 ​​mm nutzbare Höhe max 500 mm

Year of construction: 2026, condition: new, Our KVK 2A is a semi-automatic stretch wrapper with a cut-out for ground level access. The KVK 2A model is equipped with a pre-stretch system for 250% stretch. Thanks to the pre-stretch system, you can produce up to 3.5 meters of film on the pallet from 1 meter of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal contact tension, so that even light packages are not pulled off the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 2A has a 1500 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of turntable and film carriage, as well as a power stretch unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. This model is our recommendation if you wrap very light packages or if you wrap more than approx. 30 pallets a day. The KVK 2A is ideal if no ramp can be used for space reasons. Or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. Pgodez E Ixaopfx Airju For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, ECOSPIR EV These are very robust and largely maintenance-free machines that impress not only with their exterior design, but also with their sophisticated and well-engineered technology. Easy operation via touchscreen display. Minimal installation effort – Plug and Play. Technical Data: Operation via TOUCH SCREEN Storage of up to 8 wrapping programs Film tension control with mechanical brake Turntable diameter: 1500 mm Continuous turntable load capacity: 2000 kg Maximum pallet height: 2200 mm Power supply: 240 V, 50 Hz, 1 kW Machine with CE marking Warranty: 24 months Options: upon request Pgsdpfxjmt Du Ne Aireu Ramp 1650 mm Ramp for electric pallet truck (length 3000 mm) Tower extension for pallet heights up to max. 2700 mm POWER PRE-Stretch 200% POWER PRE-Stretch 250% POWER PRE-Stretch 0–400% (with frequency inverter) Black-light photocell

Year of construction: 2017, condition: used, Manufacturer : Transvis Type: Semi-automatic cap screwdriver Application: screwing / capping Year: 2017 Maximum product dimensions: Ø 54.5 x 82 mm Minimum product dimensions: Ø 45.5 x 68 mm Product weight: 90–150 g HMI control panel Asynchronous motor power: 0.18 kW Two-hand control Torque control Pgedpfx Aey H Rfqsireu Overall dimensions: 650 x 1000 x 1800 Screw capper dimensions: 650 x 935 x 990 Weight : 100 kg Spare parts and formats available Power supply: 220V single-phase / 6 bar compressed air Technical documentation available Video available in running condition

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 50062, Siat WR100-M mobile robot wrapping pallets vertically, H2100, serial 50062, serial number FAMROBOTWR100, year 2006, with battery charger. This robot is in good working condition Equipped with key and 2 new batteries, new inductive side sensor. Weight: 350 kg Dimensions (L x W x H) 3.30 x 1.50 x 2.95 M Rotary plate 1500 MM DIAMETER Rotation 10 RPM DEPENDING THE SELECTED PROGRAM Reel MAX. 500 MM WIDE X 300 MM DIAMETER Film MAX. 1800 MM HIGH Pallet weight MAX. 2000 KG Pgodow E Epbopfx Airju Pallet dimensions MAX 1000 X 1200 MM Power 1 KW MAST Wrapping height up to: 2800 mm. PS HEAD Pre stretch 250% Film stretching from 1 m to 3.5 m. Stretching occurs in the head, not on the load photocell. NUMBER OF PALLETS / 1 BATTERY CHARGING up to 120 Euro pallets: H 1800 mm. WRAPPING FUNCTIONS: 4 programs programmable by the operator: Up-down cycle; Up-only cycle; Down-only cycle (you can set the starting height of the cycle); Cycle for attaching a foil hood. Adjustable number of wraps at the bottom of the pallet number of wraps at the middle of the pallet; Adjustable number of wraps at the top of the pallet; Adjustable wrapping speed up to a maximum of 83 m/min; Adjustable speed of the foil trolley rising and falling; Adjustable tension force via an electro-magnetic brake; Pre stretch 150, 200, 250% Video: Price Euro 3.900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Semi-automatic PET bottle blow molding machine Manufacturer: FERENC Model: F-1400 Year of manufacture: 2006 Output: approx. 800 pcs/h Number of molds in the machine: 2 x 5 L (48 mm cap) Oven dimensions: - Length: 900 mm - Width: 900 mm - Height: 1200 mm Blow molder dimensions: - Length: 1800 mm - Width: 750 mm - Height: 2000 mm Set weight: 1200 kg Technical condition: used machine Podsugu E Ropfx Airjgu

Condition: new, Year of construction: 2026, functionality: fully functional, Cutting capacity 90° (rectangular) 460 x 250 mm Cutting capacity 90° (round) 330 mm Cutting capacity 60° (rectangular) 205 x 200 mm Cutting capacity 60° (round) 205 mm Cutting capacity 45° (rectangular) 305 x 250 mm Cutting capacity 45° (round) 305 mm Adjustable band speed 48/96 m/min (60 Hz) Saw band dimensions 27 x 0.9 x 3960 mm Psdjz Drarspfx Airsgu Power consumption 1.5 / 2.2 kW Machine weight 900 / 1060 kg (net/gross) Machine dimensions LxWxH = 2310 x 1070 x 1630 mm

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-speed, high-safety, OHS compliant saw. A420 is a simple to use saw for small-profile cutting of straight or mitered aluminium parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum chip extractor Pjdpjmb U Tbefx Airegu Highly suitable for: • Windows and doors manufacture • Commercial office manufacture • Data centres manufacture • Linear lighting manufacture • Blinds and shades manufacture • Composites manufacture

Condition: new, Year of construction: 2026, Supercharge your aluminium cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the aluminium size you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. Psdpfomb U Tfox Airegu High-speed aluminium processing with precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales

Condition: new, Year of construction: 2026, overall weight: 420 kg, total length: 28,650 mm, total width: 15,000 mm, total height: 25,800 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our Profiline is a semi-automatic stretch wrapper with up to 32 storable programs that guarantee absolutely consistent results. programs guarantees absolutely consistent results and thus reliably excludes the "human factor". "human factor". With the electromagnetic brake, the tension of the film can be precisely adjusted in the individual individual steps (foot winding, winding up / head winding / winding down) in the programs. programs. As part of the programs, you can also set how fast the film carriage and turntable run. and turntable run. Head wrapping, foot wrapping and the overlap of the film at the end of the pallet can also be of the film at the end of the pallet can be saved for each program. In this way, you can store individual programs for each individual programs for each wrapping pattern to achieve ever more perfect wrapping results. results. The programs can be password-protected so that the user can only can only choose from the stored programs. With a weight of 420 kg, this model is designed for loads of up to 1200 kg (optionally up to 2000 kg possible). Our Profiline has a 1500 mm turntable and can wrap pallets up to a height of 2500 mm high as standard. Automatic recognition of your pallets (via photocell) is a matter of course as well as adjustable head and foot wrapping. If the wrapper wrapper is to be used at a different location in between, it can be easily moved by means of can be easily lifted and moved using a forklift truck. This model is our recommendation if you are looking for a professional & robust pallet wrapper Pgjdpsz E Iltefx Aireu for larger quantities, which can be optimally adapted to your needs. Would you like a larger plate, a higher mast, pre-stretching of the film or an automatic film section? Almost anything is possible with this machine! We would also be happy to configure this machine for you as a new machine with the options to suit your needs. About us: Business is done between people - we are convinced of that! A supplier delivers the goods you order - a partner can do more: he helps you find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2026, Upgrade your timber production to a high-safety, OHS compliant saw. A420 is a simple to use saw for high-speed cutting of softwood in straight or mitered parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum dust extractor Highly suitable for: • Planters and boxes manufacture • Light timber manufacture • Decorative manufacture • Woodcraft manufacture • Furniture manufacture Psdomb U T Hjpfx Airjgu

Condition: new, Year of construction: 2026, High-speed timber processing with high-powered motor and PLC controlled motion. Psdpfx Asmcaahjiregu Solid steel construction with machined saw table, and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.5 sec for a complete up-down saw motion. • Ø460 mm TCT blade with 5.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 300mm on each side of saw blade • Adjustable T-clamp with adjustable saw up-down cutting feed rate • Flat precision ground table, assuring cutting accuracy • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 120-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914mm diameter blade models Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting