Used Semi Automatic Bandsaw for sale (30,216)

Condition: new, Year of construction: 2024, Aluminum circular saw BC 450 HA, semi-automatic (MG FRONT-450) The BC 450 HA is a double miter saw with a swivel range of 45° to the left and 22.5° to the right and an automatic mitre adjustment via stop functions. The saw stroke runs automatically and the material is clamped pneumatically. The saw blade (450 x 30 mm) runs horizontally. can also be optionally equipped with a digital mitre angle display, a scribing laser and pneumatics for lifting the protective hood! Equipment Double mitre machine with powerful drive motor Two-button control for triggering the saw cut (optionally also available as one-button control) Large mitre range from -22.5° to +45°, Swivel range 67.5° - 0° - 45° Automatic miter adjustment, fixed stop functions at -45° / 90° / +45° and two variable stop functions adjustable to the desired angle! Two horizontal pneumatic clamping cylinders Clearly arranged control panel Large protective hood covers the entire working area, is lifted pneumatically Adjustable blade and cutting feed Connections for extraction system Minimal lubrication system Air gun for cleaning the machine Saw blade ø 450 mm Work sequence 1. setting the cutting angle 2. inserting the material 3. adjusting the stroke speed 4. bring the clamping cylinder to within 20 mm of the material 5. clamp the material 6. press the The machine is ready for operation by pressing the start button. 7. press and hold the two SAW buttons, the material is sawn. 8. 8. at the end of the cycle, release both SAW buttons and press the STOP button 9. 9. open the clamping vice and remove or advance the material Plantec Maschinen GmbH Hsdpfxepa Nxaj Aabjnu

Year of construction: 2019, condition: new, SEMIAUTOMATIC BOOK COVER POSITION MACHINE Hjdpsfdzwyjfx Aabonu LJ308A -new machine

Condition: used, Year of construction: 2025, functionality: limited functionality, The pallet wrapper works but needs a new board (circuit board). Hnodpfx Ajwrcz Uoabeu

Year of construction: 2023, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23MythoSarya03, Mytho S Hodpfx Aasv Iquvobenu with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: new, Year of construction: 2025, TVM Ø 400 - The Versatile and Customizable Saw for Your Carpentry Workshop The TVM 400 is the all-purpose saw that is essential for your workshop. With a solid and high-performance structure, it is designed to provide an excellent solution for cutting small-section woods, quickly eliminating knots and imperfections. Thanks to the option of customizing it with accessories such as roller conveyors and stops, the TVM 400 ensures maximum versatility and productivity (discover more details in the ACCESSORIES section). Key Features: Hjdpfx Aaev Iqaxjbonu Efficient and Cost-Effective: Ideal for small and medium-sized carpentry workshops, offering excellent value for money. Ease of Use: Perfect for use without the need for highly skilled personnel, saving time and resources. Reliability: Always ready for use, supporting all operational needs and reducing machine downtime. Cost Optimization: With the TVM 400, you get a durable machine that doesn’t require frequent maintenance interventions. Advantages: Operator safety ensured by a design aimed at reducing risks. Optimized ergonomics to improve productivity during processing stages. Wear compensation of materials without the need for frequent replacements. Simplified maintenance to reduce costs and increase efficiency. Ready for CURSAL accessories, offering full customization according to production needs. Rationalized cost/quality ratio, making the machine a smart investment. Applications: Production of semi-finished wooden furniture components. Manufacturing of window frames and similar applications. Small-batch production of various types, for specific needs. TVM Ø 500 - The Advanced Solution for High-Volume Production The TVM 500 is one of the most in-demand saws on the market for its ability to handle high-volume production with quality and precision. The optimal cutting section allows for the processing of 90% of squared boards and is perfect for industries that require high performance, such as packaging, construction, and the production of sofa frames and laminated panels. This machine offers maximum flexibility and precision in operations, thanks to advanced features such as: Electropneumatic stops, ideal for cutting stacked boards with repetitive measurements. Numerically controlled stops, for precise measurement management, even in complex processes. Discharge of semi-finished products via transfer systems, discharge tables, or roller conveyors, ensuring smooth and fast material handling. Main Advantages: High productivity for large-volume applications. Versatility in sizes and configurations, adaptable to multiple industries. Operational flexibility supported by advanced accessories. The TVM Ø 500 represents a strategic choice for those seeking a saw capable of meeting the most demanding challenges in the industry, while maintaining high standards of quality and efficiency.

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 160 mm, cutting width (max.): 610 mm, power: 0.01 kW (0.01 HP), Extreme robustness and maximum power! Hodpfx Asfcdnleabjnu The Legend_600 has a completely painted, thick and reinforced steel structure. The blade with a diameter of 600 mm, the power of 9.2 kW and the rotation speed of 2750 rpm make it the ideal machine for those who work with wood up to a maximum of 150 mm thick and 610 mm wide.

Condition: new, Year of construction: 2024, Aluminum circular saw UK 650 HA, semi-automatic The UK 650 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 650 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hsdpfx Asidun Doabenu Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 650 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, Semi-automatic piston filler 50ml - 1.300ml Stainless steel cylinder Hjdpfx Aaeib A Ipjbjnu Benchtop unit Pneumatic/volumetric controlled dosing unit Special 3-way valve for viscous or lumpy products Up to 600 pieces/hour depending on product, filling quantity and operator Filling quantities: 0 -38 ml, 2 - 100 ml, 20 - 680 ml, 50 - 1,300 ml

Condition: new, The machine individual 520.360 DGH is a semi-automatic double mitre band saw in two-column design. The mitre range of the saw extends from 30° left continuously to 30° right. The model individual 520.360 DGH has a hydraulic full stroke vice and an easy to use control in plain text display. Standard equipment details - Double mitre 30° - 45° - 90° - 45° - 30° - Hydraulic full stroke vice - Saw frame mounted on preloaded linear guides - Infinitely variable saw band speed - Infinitely adjustable saw feed and cutting pressure Hedpfedyn H Tex Aabenu - Automatic cutting pressure regulation - Precision carbide saw band guides - Powerful drive motor with 3,0 kW - Modern control with plain text display and membrane keyboard - Freely positionable control panel - Large dimensioned hydraulic unit - Machine designed according to current CE standards and safety guidelines inclusive: Minimum quantity lubrication digital mitre gauge frame height adjustment at the control panel price on request

Year of construction: 2023, condition: as good as new (ex-display), Very robust and easy to use semi-automatic hydraulic double mitre band saw. Hydraulic saw feed and saw pressure separately adjustable, Vice can be operated hydraulically and manually, 2 saw band speeds as standard, material stop swivelling, Coolant device and chip container Main technical data: Hnjdpfjgk A Rwjx Aabju Sawing length up to 260 mm Sawing height up to 220 mm Saw diameter up to 220 mm Power 1,4 KW Dimensions lxwxh 1250x640x1300 mm Also available in other sizes (320 and 450 mm) Ask for a non-binding offer. We offer delivery, service, spare parts and saw bands from one source. Our postcode areas in Germany are 17,18,19,23

Year of construction: 2025, condition: new, ECOSPIR TS These are very robust and largely maintenance-free machines that not only impress with their external design, but also with their sophisticated and well-thought-out technology. Technical specifications: • Operation via TOUCH SCREEN • Storage of 8 wrapping programs • Turntable diameter 1500 mm • Turntable permanent load 1200 kg • Pallet height max. 2200 mm • Connection value 240 V, 50 Hz 1.5 KW • Speed of the film carriage Hjdpfxjhfdf Es Aabonu • Adjustment of foot and head wraps • Cross windings / spiral one-way winding • Height detection by photocell • can wrap black products or stretch film (optional) • CE marked machine Warranty: 24 months (single-shift operation),

Condition: new, Year of construction: 2025, Space saving high-tec MEBApro 260 AP Hnedpfx Aasbv Nk Esbeu Standard equipment 2-column-linear guided saw frame Feed by adjustable frequency controlled lead screw drive with automatic pressure regulation for best cutting performance and saw blade life Steplessly variable saw blade speed with powerful, frequency regulated drive Central and easy to use control panel Adjustable saw frame height by sensor system Combined precise saw blade carbide-roller guidance with saw blade brush Inclination of saw blade to vice bed approx. 2° Colour silver grey / blue grey (RAL 7001 / RAL 7031) 1 bandsaw blade 4/6 tpi Instruction manual and spare parts list on CD-ROM Additional standard equipment NC-controlled, automatic infeed with hydraulic material full-stroke clamping Simple operating by NC-control with clear text message display by SPS control Material infeed without re-clamping of material at short sections Stable, linear guided infeed gripper with servo positioning for highest accuracy Automatic adjustment of saw blade guidance to material width Driven saw blade cleaning brush

Year of construction: 2023, condition: new, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment left 45º / 90º / right-45º degrees • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control Hnjdpfx Aaogwt Rysbju • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 125 mm • Saw blade 350mm • Saw blade not included!

Condition: new, Year of construction: 2025, semi-automatic labelling machine FL-100 Labelling machine FL-100 product diameter: 15 - 130 mm label width: 15 - 200 mm label length: 15 - 600 mm Roll diameter: 300 mm core diameter: 38 - 110 mm dispensing speed: 4 - 20 m/min Supply voltage: 230 V / 50 Hz Weight: Approx. 36 KG Dimensions: 800 (L) x 500 (W) x 400 (H) mm Hjdpfx Aefnkbroabonu

Condition: new, Semi-automatic metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°) Basic equipment: - Large rotatable support table without wear! (The cutting channel of the saw band rotates with the mitre) - band tension indicator - hydraulic control of the cast iron saw arm - hydraulic clamping of the workpiece via short stroke cylinder - Height limitation of the saw frame by means of potentiometer from the control panel - hydraulic cutting pressure regulation (solid material - pipe) - Lowering of the saw arm via hydraulic cylinder; stepless adjustment - Lifting of the saw arm manually after the cut - easy manual shifting of the vice R/L - electrical band tension control with saw band breakage control - coolant pump with double feed to the saw band guides - carbide saw band guides and guide rollers - Bi - metal saw band M 42 - chip brush Technical Data ● Cutting range: round flat square 90° 278 340 x 275 275 45° R 260 320 x 255 230 Hodped Dpz Sofx Aabonu 30° R 155 145 x 115 115 45° L 205 145 x 275 180 Drive power: 1.5KW//400V//50 Hz Belt speed: 20-120 m/min infinitely variable Saw band dimension: 3125 x 27 x 0.9 mm Remaining piece length: 20 mm Smallest ø: 5 mm Material support height: 775 mm Dimension: 1700 x 1500 x 2100 mm Weight: 410 kg

Year of construction: 2023, condition: new, Very robust and easy to use semi-automatic hydraulic double mitre band saw. Hydraulic saw feed and saw pressure separately adjustable, Vice can be operated hydraulically and manually, 2 saw band speeds as standard, Hsdpfx Aajhaq D Iobjnu material stop swivelling Coolant device and chip container Main technical data: Sawing length up to 450 mm Sawing height up to 320 mm Saw diameter up to 330 mm Power 2,4 KW - 4,0 KW dimensions lxwxh 2050x1180x1550 mm Illustrations (photos) with options Also available in other sizes (260 and 320 mm) Ask for a non-binding offer. We offer delivery, service, spare parts and saw bands from one source. Our postcode areas in Germany are 17,18,19,23

Year of construction: 2025, condition: new, ECOSPIR EV These are very robust and largely maintenance-free machines that not only impress with their external design, but also with their sophisticated and well-thought-out technology. Technical specifications: • Operation via TOUCH SCREEN • Storage of 8 wrapping programs • Turntable diameter 1500 mm • Turntable permanent load 2000 kg • Pallet height max. 2200 mm • Connection value 240 V, 50 Hz 1 KW • CE marked machine Hsdpfx Aaehfdc Rebjnu Warranty: 24 months (single-shift operation),

Condition: new, Year of construction: 2025, MEBAeco Ready-made individuality Central and easy to use control panel Movable blade guide arm, adjustable to suit material width Combined precise saw blade carbide-roller guidance Hnodpfx Aaebzll Hjbeu Saw blade tension by torque wrench Coolant equipment can be combined with MEBA micro-coolant system MEBA power package Lifting and lowering of the saw frame with a frequency regulated lead screw drive, with automatic cutting pressure and feed regulator. Rapid lowering of the saw frame via button until material edge Powerful, frequency-controlled saw blade drive Hydraulic material full-stroke clamping Minimum speed- and saw blade control on the bandwheel Ergonomic panel based on „Windows CE“ system software Stepless height adjustment by height sensing Automatic material feed: Compact design for short sections and flexible infeed shuttle system for almost any length available Electric mitre swivelling by servo motor

Condition: new, Year of construction: 2024, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used for cutting profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast, convenient material changes as well as simple mitre angle adjustment. The UK 352 HA has a continuously adjustable mitre range of up to 45° on the left and 0° on the right. The saw feed is automatic at the touch of a button and the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes with a minimum lubrication system and an air spray gun for cleaning the machine as standard! Connections for a chip extraction system are available on this machine. Equipment - Precision underfloor circular saw - Mitre adjustment left 45º / 90º / right-45º degrees Hedpfx Aogwt Rreabsnu - incl. 2 pneumatic clamping vices (vertical) - Saw blade feed infinitely adjustable - Two-hand safety control - Adjustable material stop (rear) - Extraction device - chip extraction system - Mist spraying device for air-oil cooling - Air gun with spiral hose - incl. maintenance unit with pressure reducer - Ergonomically arranged control panel - Max. cutting height 125 mm - Saw blade 350 mm - Saw blade not included in scope of delivery! It is possible for you to view the desired system in our production/demonstration hall at any time. Please do not hesitate to contact us. Plantec Maschinen GmbH

Condition: new, Year of construction: 2022, Semi-Automatic Universal Screen Printing Machine SFM 650 DHE Flat printing machine with pneumatic turning system for bottle crates. The crates will be turned by 180degree and can be printed from two sides, Machine with parallel lifting upper frame, printing size: 400x600mm, with motor squeegee motion and height-adjustable feeding table incl. x/y-adjustment, adjustable slot nut printing bed 650x950mm. Height adjustment of the feeding table: approx. 300mm, max. height of the printing object: approx. 450mm. Machine with base frame and lateral safety frame, required compressed air: 6bar, supply voltage: 230V, 50Hz. Electro-pneumatic machine, micro-processor control. Screen printing machine for flat printing, with slot nut printing bed (option: vacuum printing bed with vacuum pump), printing movements during set-up operation separately adjustable, squeegee stroke, squeegee pressure and floodbar infinitely adjustable. Delivery time 2-3 weeks Hodpfehrdkrex Aabenu

Year of construction: 2021, condition: new, Fastech horizontal bandsaw semi-automatic BMSY 360 DGH ECO Round cutting range mm: 360 Flat cutting range mm: 510 x 360 Square Cutting range mm: 360 +30 ° Round cutting range mm: 360 +30 ° Flat Cutting range mm: 440 x 360 +30 ° Square Cutting range mm: 360 +45 ° Round Cutting range mm: 360 Hnjdpfx Aeg Ektteabeu +45 ° Flat cutting range mm: 390 x 360 +45 ° Square cutting area mm: 360 +60 ° Round cutting range mm: 200 +60 ° Flat cutting range mm: 200 x 360 +60 ° Square cutting range mm: 200 -30 ° Round cutting range mm: 360 -30 ° Flat cutting range mm: 440 x 360 -30 ° Square cutting range mm: 360 -45 ° Round cutting range mm: 360 -45 ° Flat cutting range mm: 390 x 360 -45 ° Square cutting area mm: 360 -60 ° Round cutting range mm: 260 -60 ° Flat cutting range mm: 260 x 360 -60 ° Square cutting range mm: 260 Engine power main drive kW 3 Hydraulic pump power kW 0,37 Engine power coolant pump kW 0,12 Band speed, infinitely variable: m/min.20 - 100 Saw band dimensions mm: 4800x34x1,1 Working surface height mm: 860 weight kg: 1450 length / depth / height mm: 2650 / 1210 / 1870 Double mitre saw Infinitely variable belt speed hydraulic vice High performance gearbox Hydromechanical saw band tensioning Saw band brush Digital display for mitre angle

Year of construction: 2025, condition: as good as new (ex-display), ECOSPIR EV These are very robust and largely maintenance-free machines that not only impress with their external design, but also with their sophisticated and well-thought-out technology. Hedpfxemt Du Ns Aabjnu Technical specifications: • Operation via TOUCH SCREEN • Storage of 8 wrapping programs • Turntable diameter 1650 mm • Turntable permanent load 2000 kg • Pallet height max. 2200 mm • Connection value 240 V, 50 Hz 1 KW • CE marked machine Warranty: 24 months (single-shift operation), Options: Ramp for pallet truck & electric ant (Price on request)

Condition: new, Year of construction: 2024, pressure: 6 bar, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Hnedogcbwgjpfx Aabeu

Condition: new, Year of construction: 2022, Semi-Automatic Universal Screen Printing Machine TIC SF550DE Hedoc Ngl Hjpfx Aabonu Flat and round printing machine, stand model, printing size: 300x450mm or printing ø 160x300mm, max. screen frame size: 730x530x30mm. Machine with base frame and safety bars at the sides. 230V, 50Hz. Electro-pneumatic machine, micro-processor control. Flat printing machine with slot-stone printing bed (option: vacuum printing bed with vacuum pump), curve printing machine with universal reception for cylindrical objects, as well as rack and pinion drive for multi-colour job printing, incl. blow up equipment, printing movements during set-up operation separately adjustable, squeegee stroke, squeegee speed, and floodbar infinitely adjustable.Delivery time 14-16 weeks

Condition: new, Year of construction: 2024, The UK-400-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-400 A has an infinitely adjustable miter range left and right up to 20° (swivel range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously Hnodpfx Aajgwt Rnjbsu • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 130mm • Saw blade 400mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.