Used Serve for sale (1,897)

Condition: like new (used), Year of construction: 2022, clamping force: 5,500 kN, Equipment: documentation/manual, HAITIAN JU5500III/2230 – Technical Data Servo Screw diameter: 65 mm Shot volume: 1,068 cm³ Shot weight (PS): 972 g Injection speed: 372 g/s Bedezx D Hiopfx Abtswt Plasticizing capacity (GPPS): 60.0 g/s Plasticizing capacity (HDPE): 85.7 g/s Max. injection pressure: 212 MPa Injection pressure: 182 MPa Injection stroke: 322 mm Screw speed: 0–225 rpm Heating power: 33 kW Clamping force: 5,500 kN / 550 tons Tie-bar spacing (H × W): 920 × 830 mm Max. mould height: 1,100 mm Min. mould height: 350 mm Mould opening stroke: 1,500 / 750 mm Max. daylight: 1,850 mm Ejector stroke: 350 mm Ejector force: 110 kN Number of ejectors: 21 Pump motor power: 45 + 18.5 kW Oil tank capacity: 640 L Machine dimensions (L × W × H): 8.59 × 2.84 × 2.46 m Machine weight: approx. 22 tons Minimum mould dimensions (L × W): 645 × 580 mm

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, MONTANA DIAMOND Crystal Glide Ski Servicing Robot – in excellent condition and ready for immediate use! For sale is a high-performance, fully automatic machine for professional winter sports servicing. This machine is specifically designed for workshops with high service volumes and, thanks to its 2 grinding stones, delivers first-class, fully automatic results. What makes this machine special: it has been meticulously maintained, cared for, and serviced by the owner himself throughout the years. It has been completely overhauled – many important core components, including the motors, have been recently replaced. Ready for immediate use – no backlog of maintenance required. The machine can be put into operation directly in your workshop. Bwjdpjzv Sqdofx Abtst The price includes 2 grinding stones, diamonds, and sensors (value of approximately €3,400). Please refer to the attached documentation for detailed technical information and specifications. Viewing is possible until the end of September. Pick-up only / transport must be arranged by the buyer. Sale to businesses, excluding any warranty. For sales to foreign countries: VAT invoice IGL (Intra-Community Supply).

Condition: good (used), functionality: fully functional, Year of construction: 1997, Honda HS 1390 Z snow blower, manufactured in 1997, gasoline engine, 9.6 kW, 90 cm clearing width, continuously variable hydrostatic drive, Honda engine with electric start, snow thrower unit adjustable horizontally and vertically, discharge chute adjustable electrically, work light, weight 232 kg, serial number 2000141, battery needs to be replaced. Bodpfx Aozwumwebtjwt

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: N20190155, Wet cutting machine Metkon Servocut 502 - AX for sale due to business closure, little use, includes diamond cutting blade. Bwsdpfx Aozvlqkebtjt

Condition: as good as new (ex-display), Year of construction: 2024, pressing force: 80 t, Equipment: documentation/manual, YAWEI SKE1-80 Precision Servo Press – 800 kN / 80 t - Stock Machine - Demo Machine - Available immediately For sale is a YAWEI SKE1-80 precision servo press from the manufacturer Jiangsu Yawei Machine Tool. This servo press is suitable for precise punching, forming, and pressing operations and, thanks to the servo drive, allows for freely adjustable motion and pressing curves. Speed, position, and the pressing process can be controlled precisely. Manufacturer: YAWEI / Jiangsu Yawei Machine Tool Model: SKE1-80 Pressing force: 800 kN / approx. 80 t Bodpfx Aezyamzjbtowt Ram stroke: 150 mm Idle stroke rate: max. 65 strokes/min Working stroke: 6 mm Max. tool installation height: 330 mm Ram adjustment: 80 mm Ram area: 560 × 460 mm Table area: 1,000 × 600 mm Table thickness: 120 mm Operating pressure: 0.55 MPa Peak torque: 4,000 Nm Drive: Servo motor / Gear drive

Year of construction: 2022, operating hours: 95,00,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 4131.05/22, -Bograma BSR 550 Servo with pallet feeder -Cylinder heater -Registration mark reader Bwjdpszl Skpofx Abtot -Interface box for controlling an external vacuum valve -Stack delivery STA 550BK for a maximum of 9 sheets -Performance: 12,000 sheets/hour, 165 m/min -Minimum format: 210 x 297 mm -Maximum format: 550 x 750 mm

Condition: excellent (used), Year of construction: 2015, year of last overhaul: 2025, Demag Systec 210-840 (2015) SERVO Manufacturer: Sumitomo SHI DEMAG Bedpfxszbg Eze Abtswt Type of machine: Systec 210/580-840 Clamping force [kN]: 2100 Shot volume [cm³]: 358 Clearance between tie bars hor. [mm]: 580 Clearance between tie bars vert. [mm]: 580 Mold height min. [mm]: 340 Mold height max. [mm]: 690 Opening stroke max. [mm]: 575 Daylight max. [mm]: 1365 Year of manufacture: 2015 Machine dimensions L/W/H [mm]: 6022 / 1556 / 2090 Control unit and software version: NC3 Max. weight of entire molding tool [kg]: 3300 Screw diameter [mm]: 45 Screw design: 3 zone Screw relation (length/diameter): 20:1 Screw back flow valve: Yes Ejector system type: Hydraulic Installed heating power [kW]: 39 No. of integrated hot runner circuits: 12 Number of temperature control electrical valves: 28 Number of cascade controls: 2 Connection to central drying system: Yes Unloading robot system available: Yes Number of tempering units: 3 Tempering units max. temperature [°C]: 160 Machine oil capacity [l]: 400 Net power of hydraulic pump engine [kW]: 26

Condition: like new (used), Year of construction: 2019, functionality: fully functional, We offer a galvanized air receiver – 5000 liters. Manufacturer – OKS Otto Klein GmbH Bwodpfx Aezt Icqsbtot Maximum working pressure – 11 bar Year of manufacture – 2019 Dimensions: Diameter – 1400 mm Height – 3570 mm Weight – 1050 kg Air receiver with data plate. Air receiver including fittings – overpressure valve, pressure gauge + flanges. Air receiver, air tank, pressure vessel.

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, Lenze Bachhofen AG, drive technology TYPE: Bjdpfx Abjzxbh Dstswt MDFQABS100-22 100 Hz 20.6 kW 2930 rpm Completely overhauled in 2023 See images.

Condition: used, mileage: 42,000 km, power: 184 kW (250.17 HP), axle configuration: 4x2, wheelbase: 48,150 mm, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, trailer coupling, Year of manufacture: 2020 Front axle: Steering; Tyre profile left: 100%; Tyre profile right: 100% Rear axle: Double wheels; Tyre profile left inner: 100%; Tyre profile left outer: 100%; Tyre profile right outer: 100%; Tyre profile right outer: 100% Empty weight: 6.784 kg Carrying capacity: 5.206 kg GVW: 11.990 kg = Additional options and accessories = - Air suspension - Alarmsystem - Camera system - Line assist - Outside temperature display Bwjdezxw A Rspfx Abtot - Reversing camera - Side door = Remarks = New tacho type 2 Speciale intereur Converter 220 volt Alarm klase 1

Condition: ready for operation (used), functionality: fully functional, mileage: 37,457 km, power: 55 kW (74.78 HP), first registration: 09/2016, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, empty load weight: 1,950 kg, next inspection (TÜV): 02/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 4,738 h, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 as a winter service vehicle From first owner = former municipal/government vehicle Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter was carried out at 37,454 in 08/2026 2,584 hydraulic operating hours 4,738 total operating hours 37,457 kilometers Including Kif front sweeper, type CM 1600, 1,300 mm wide, manufactured in 2019 (as new/never used in snow) Including Gmeiner salt spreader, type Husky 500V FS, manufactured in 2019 (as new/used twice for testing) 4x4 all-wheel drive – hydrostatic all-wheel drive Rear view camera Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,016 mm / Width: 1,210 mm / Height: 1,970 mm (without attachments) Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Working speeds selectable 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Bsdpfx Abszrrvxotewt Cab with air-suspended driver's seat Air conditioning/heating Water treatment system Fire hydrant connection Dosing system Permissible total weight: 3500 kg Unladen weight: 1950 kg The spreader is driven and operated by the machine's hydraulics. Other applications are possible through additional attachments from HAKO, such as sweepers, snow plows, and lawnmowers (not included in the scope of supply) Errors, changes, and prior sale are subject to change. We sell exclusively according to our general terms and conditions and with the exclusion of any warranty. Errors, changes, and prior sale are subject to change. We are available for you continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m., on Saturdays by prior appointment, and telephone appointments can be arranged outside of these opening hours. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters will be given priority, and this applies to our entire vehicle inventory. The above information is non-binding, and errors/changes and prior sale are subject to change!

Condition: new, Bosch Rexroth Indramat Servo Motor Bwjdpfxjzxbuws Abtot Model: MHD093C-058-PG1-AN Material No.: R911273523 3-Phase Permanent Magnet Motor Liquid Cooled Holding Brake: 22 Nm, 24 V DC Continuous Standstill Torque: 23.0 Nm Liquid Cooled Torque: 43.7 Nm Maximum Speed: 6000 rpm Protection Class: IP65 Weight: approx. 24.6 kg Made in Germany Condition: New / unused old stock. The motor is supplied in its original packaging with protective packaging and documentation as shown in the pictures. The nameplate and product number are clearly visible in the photos. Suitable for industrial automation, CNC machines, machine tools and other Rexroth Indramat applications. Part Number: R911273523 Please check compatibility with your application before purchasing. Worldwide shipping available.

Condition: used, - Dimensions LxWxH 1910x1130x2260mm - 1 support 600x800 mm or 2 supports 400x600 mm per level - 10 levels per door - Serial number: 2002/2717 A - Year: 2002 - Temperature: -20°C per door Bwjdew R Sqnepfx Abtst - Refrigeration capacity at -30/+32°C - Entry at 600 mm - Inner panels in stainless steel and outer panels in pre-coated metallic grey - Outer door in stainless steel - Aluminium handle - 1 compressor / 1 evaporator - Adjustable stainless steel runners with 20 mm pitch - Gap between trays: 60 mm - Separate refrigeration unit as standard - Voltage: 400V - Power: 4.3kW

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Injection volume: 891 cm3 Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Min Mould installation height: 450 mm Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) Hot Runners 1. 24-zone integrated hot runner controller (ZE 273) 2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10) 3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276) 4. Hot runner connector upgrade for 24 zones (SO 01) 5. Total: 60 zones across two controllers Equipment Highlights Injection 1. Electric screw drive, frequency-controlled (WA 313) 2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12) 3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08) Quality & Process Monitoring 1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04) Bwedpfx Aboyzylvstet 2. Holding pressure switchover with peak value capture and recording (ZE 350) 3. 100% process data recording (PDE) with statistics and graphics (ZE 420) Mold & Core Pulls 1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237) 2. Electric pressure relief for core pulls (SO 27) 3. Separate pneumatic hot runner needle (SO 04x) Quick Mold Clamping 1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d) Connectivity & Automation 1. OPC/UA interface for host systems (SO 5631) 2. WC5 World Connect — remote access and service (ZE 571) 3. Integrated BDE/PDE production data management (ZE 471 + ZE 420) 4. Demag robot interface via CAN bus (ZE 752) Energy & Infrastructure 1. Integrated energy monitoring with per-part cost calculation (ZE 4921) 2. Elastic machine mounting / vibration isolation (WA 180) \+ 2x Magnetic platten

Condition: excellent (used), Year of construction: 2014, - Accessories included. - Control system: WEILER C3 based on Siemens SINUMERIK 840D WORK AREA Center height 165 mm Swinging diameter over bed 330 mm Swinging diameter over cross slide 160 mm Distance between centers 750 mm TURRET Turret head DIN 55027/DIN ISO 702-3, size 5 Spindle bore 43 mm Spindle diameter in the front bearing 70 mm MAIN DRIVE Drive power 60%/100% ED 9/7 kW Speed range 1 – 4,500 rpm Number of speeds stepless FEED RANGE Number stepless Bsdpfxjztxq Es Abtowt Longitudinal 0.001 – 10 mm/rev Transverse 0.001 – 10 mm/rev Feed force longitudinal 6,000 N Feed force transverse 3,000 N Max. rapid traverse speed longitudinal/transverse 6/3 m/min THREAD CUTTING RANGE Metric threads 0.1 – 400 mm Inch threads 56 – 1/4 threads/inch TAILSTOCK Tailstock spindle diameter 50 mm Tailstock quill stroke 110 mm Internal taper DIN 228 MK 3 mm

Condition: ready for operation (used), functionality: fully functional, mileage: 37,457 km, power: 55 kW (74.78 HP), first registration: 09/2016, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, empty load weight: 1,950 kg, next inspection (TÜV): 02/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 4,738 h, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 as a winter service vehicle From first owner = former municipal/government vehicle Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter was carried out at 37,454 in 08/2026 2,584 hydraulic operating hours 4,738 total operating hours 37,457 kilometers Including Kif front sweeper, type CM 1600, 1,300 mm wide, manufactured in 2019 (as new/never used in snow) Including Gmeiner salt spreader, type Husky 500V FS, manufactured in 2019 (as new/used twice for testing) 4x4 all-wheel drive – hydrostatic all-wheel drive Rear view camera Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,016 mm / Width: 1,210 mm / Height: 1,970 mm (without attachments) Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Working speeds selectable 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Bsdpfxjzrruze Abtewt Hydraulic service brake via foot pedal Cab with air-suspended driver's seat Air conditioning/heating Water treatment system Fire hydrant connection Dosing system Permissible total weight: 3500 kg Unladen weight: 1950 kg The spreader is driven and operated by the machine's hydraulics. Other applications are possible through additional attachments from HAKO, such as sweepers, snow plows, and lawnmowers (not included in the scope of supply) Errors, changes, and prior sale are subject to change. We sell exclusively according to our general terms and conditions and with the exclusion of any warranty. Errors, changes, and prior sale are subject to change. We are available for you continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m., on Saturdays by prior appointment, and telephone appointments can be arranged outside of these opening hours. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters will be given priority, and this applies to our entire vehicle inventory. The above information is non-binding, and errors/changes and prior sale are subject to change!

Condition: ready for operation (used), operating hours: 4,738 h, functionality: fully functional, mileage: 37,457 km, power: 55 kW (74.78 HP), first registration: 09/2016, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, empty load weight: 1,950 kg, next inspection (TÜV): 02/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 as a winter service vehicle From first owner = former municipal/government vehicle Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter was carried out at 37,454 in 08/2026 2,584 hydraulic operating hours 4,738 total operating hours 37,457 kilometers Including Kif front sweeper, type CM 1600, 1,300 mm wide, manufactured in 2019 (as new/never used in snow) Including Gmeiner salt spreader, type Husky 500V FS, manufactured in 2019 (as new/used twice for testing) 4x4 all-wheel drive – hydrostatic all-wheel drive Rear view camera Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Bsdpfx Abozrru Iotswt Permissible total weight 3,500 kg Length: 4,016 mm / Width: 1,210 mm / Height: 1,970 mm (without attachments) Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Working speeds selectable 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver's seat Air conditioning/heating Water treatment system Fire hydrant connection Dosing system Permissible total weight: 3500 kg Unladen weight: 1950 kg The spreader is driven and operated by the machine's hydraulics. Other applications are possible through additional attachments from HAKO, such as sweepers, snow plows, and lawnmowers (not included in the scope of supply) Errors, changes, and prior sale are subject to change. We sell exclusively according to our general terms and conditions and with the exclusion of any warranty. Errors, changes, and prior sale are subject to change. We are available for you continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m., on Saturdays by prior appointment, and telephone appointments can be arranged outside of these opening hours. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters will be given priority, and this applies to our entire vehicle inventory. The above information is non-binding, and errors/changes and prior sale are subject to change!

Condition: used, SEW Eurodrive CFM90L/BR/TF/AK1H/SB60 Synchronous Servo Motor with Brake Bwodozxrnhspfx Abtjt Quantity: 2 units available Manufacturer: SEW-EURODRIVE Type: CFM90L/BR/TF/AK1H/SB60 Motor Type: Synchronous Servo Motor Series: CFM90L Brake: BR Temperature Sensor: TF Encoder: AK1H Connector: SB60

Condition: ready for operation (used), functionality: fully functional, mileage: 32,362 km, power: 55 kW (74.78 HP), first registration: 11/2020, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,550 kg, empty load weight: 1,950 kg, next inspection (TÜV): 11/2026, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 4,028 h, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1650 sweepers and winter maintenance vehicle, first owner Engine inspection including oil, oil filter, and fuel filter will be performed before sale. Machine version with a new pedal system. Bjdpfx Aszmzi Dobtjwt 1,960 operating hours (sweeping) 4,028 total operating hours 10,568 sweeping kilometers 32,362 total kilometers 4x4 all-wheel drive – hydrostatic all-wheel drive Camera system for the suction shaft and rear Includes leaf vacuum hose (rare) Includes Kif snow plow, type CM 1600, 1500 mm wide (like new/never seen snow) or, alternatively, Kif front brush, type CM 1600, 1,300 mm wide, manufactured in 2019 (like new/never seen snow), not shown in the pictures Includes Gmeiner salt spreader, type Husky 500V FS, with support legs (like new/used twice for testing) Sweeping material container made of stainless steel Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Selectable working speeds 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder Hatz industrial diesel engine Low emission Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics: Circuit 1 (front) 0–50/0–70 l/min 225 bar; Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-sprung driver's seat Air conditioning / heating Water treatment system Fire hydrant connection Metering system Permissible total weight: 3500 kg Unladen weight: 1950 kg The spreader is driven and operated by the machine's hydraulics. Other applications are possible through additional attachments from HAKO, such as sweeping brushes, snow blades, and lawnmowers (not included). Errors, changes, and prior sale reserved. We sell exclusively according to our general terms and conditions and exclude any warranty. Errors, changes, and prior sale reserved. We are available Monday to Friday from 9:00 am to 5:00 pm. Saturdays by appointment. Outside of these hours, telephone appointments can be arranged. We will gladly accept your current used equipment/vehicle as a trade-in. Sales to commercial businesses and exporters are given priority; this applies to our entire vehicle stock. The above information is non-binding. Errors/changes and prior sale reserved!

Condition: excellent (used), Blanco food serving with glass top Blanco food counter refrigerated display case 40 mm granite table top Bianco Berrocal Funiert beech front panel Tray/plate slide Power supply: 230 V with lighting Dimensions: Width: 254 cm Bedpji Tvqhefx Abtswt depth: 80 cm Depth with plate slide: 110 cm Height: 190 cm Cooling information: Without compressor unit / refrigeration unit Central cooled for connection to external refrigeration system Last test 09.2022 You can find more food editions - new and used - in our store! International shipping costs on request!

Condition: new, Year of construction: 2008, functionality: fully functional, MOOG G400-1002 Series Brushless Servomotor Type: CA58814063EP3, no brake Model: G400-1002 Power: 14.3 kW Rated speed: 3000 rpm Maximum speed: 3690 rpm Torque: 60.3 Nm Current: 34.3 A Voltage: 600 V Protection rating: IP65 Bsdpjzr E Dvsfx Abtjwt Year of manufacture: 08/2008

Condition: excellent (used), Ifsys Type: 114100 Type: VL 13 Servo press Hopper system with 2 x Vibroliner and 2 x Vibrohopper 1 x return conveyor belt 2 x control unit FC 1000 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone. Bwedpfxjzd Rk Ee Abtet

Condition: good (used), Year of construction: 2019, Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current power supply, power supply module, power supply module, servo converter, servo converter -Manufacturer: Lenze, L-force Multi Drive HighLine servo inverter -Type: E94AMHE0044 Bwedpjxm Taujfx Abtst -Expansion modules: E94EYAB / E94AYM43 / E94AYFLF / E94AYCER -Number: 9x inverters available -Price: per piece -Dimensions: 460/60/H290 mm -Weight: 4.0 kg/piece

Condition: new, Year of construction: 2014, _____Demonstration unit Capacity: 1000 l Spreading width: 2-10 m Control system: Control Plus 12V Spreading angle adjustment: mechanical Mounting: 3-point linkage Overall width: 184 cm Bsdozuqz Espfx Abtewt Height: 147 cm Weight excluding mounting frame: 570 kg Minimum oil quantity: 35-50 l, 180 bar Hydraulic self-loading function Control-Plus system: Control panel, speed-dependent control via driving signal from the tractor Location: 54595 Prüm

Condition: used, Year of construction: 2015, Processing Specifications: Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Minimum draw length without interruption: 50 mm Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Unwinder: Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Web width with 48-inch unwinder: 410–1,220 mm Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches Bwodpfx Abszqt Dnstet • Stand-up pouches • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Cooling Water: Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment • Trimming station with trim removal • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system